Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 347 insertions, 0 deletions

diff --git a/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh b/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh
new file mode 100755
index 000000000..1b70c0a30
--- /dev/null
+++ b/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh
@@ -0,0 +1,347 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ret=0
+sin=""
+sout=""
+cin=""
+cout=""
+ksft_skip=4
+timeout_poll=30
+timeout_test=$((timeout_poll * 2 + 1))
+mptcp_connect=""
+
+sec=$(date +%s)
+rndh=$(printf %x $sec)-$(mktemp -u XXXXXX)
+ns1="ns1-$rndh"
+ns2="ns2-$rndh"
+ns_sbox="ns_sbox-$rndh"
+
+add_mark_rules()
+{
+	local ns=$1
+	local m=$2
+
+	local t
+	for t in iptables ip6tables; do
+		# just to debug: check we have multiple subflows connection requests
+		ip netns exec $ns $t -A OUTPUT -p tcp --syn -m mark --mark $m -j ACCEPT
+
+		# RST packets might be handled by a internal dummy socket
+		ip netns exec $ns $t -A OUTPUT -p tcp --tcp-flags RST RST -m mark --mark 0 -j ACCEPT
+
+		ip netns exec $ns $t -A OUTPUT -p tcp -m mark --mark $m -j ACCEPT
+		ip netns exec $ns $t -A OUTPUT -p tcp -m mark --mark 0 -j DROP
+	done
+}
+
+init()
+{
+	local netns
+	for netns in "$ns1" "$ns2" "$ns_sbox";do
+		ip netns add $netns || exit $ksft_skip
+		ip -net $netns link set lo up
+		ip netns exec $netns sysctl -q net.mptcp.enabled=1
+		ip netns exec $netns sysctl -q net.ipv4.conf.all.rp_filter=0
+		ip netns exec $netns sysctl -q net.ipv4.conf.default.rp_filter=0
+	done
+
+	local i
+	for i in `seq 1 4`; do
+		ip link add ns1eth$i netns "$ns1" type veth peer name ns2eth$i netns "$ns2"
+		ip -net "$ns1" addr add 10.0.$i.1/24 dev ns1eth$i
+		ip -net "$ns1" addr add dead:beef:$i::1/64 dev ns1eth$i nodad
+		ip -net "$ns1" link set ns1eth$i up
+
+		ip -net "$ns2" addr add 10.0.$i.2/24 dev ns2eth$i
+		ip -net "$ns2" addr add dead:beef:$i::2/64 dev ns2eth$i nodad
+		ip -net "$ns2" link set ns2eth$i up
+
+		# let $ns2 reach any $ns1 address from any interface
+		ip -net "$ns2" route add default via 10.0.$i.1 dev ns2eth$i metric 10$i
+
+		ip netns exec $ns1 ./pm_nl_ctl add 10.0.$i.1 flags signal
+		ip netns exec $ns1 ./pm_nl_ctl add dead:beef:$i::1 flags signal
+
+		ip netns exec $ns2 ./pm_nl_ctl add 10.0.$i.2 flags signal
+		ip netns exec $ns2 ./pm_nl_ctl add dead:beef:$i::2 flags signal
+	done
+
+	ip netns exec $ns1 ./pm_nl_ctl limits 8 8
+	ip netns exec $ns2 ./pm_nl_ctl limits 8 8
+
+	add_mark_rules $ns1 1
+	add_mark_rules $ns2 2
+}
+
+cleanup()
+{
+	local netns
+	for netns in "$ns1" "$ns2" "$ns_sbox"; do
+		ip netns del $netns
+	done
+	rm -f "$cin" "$cout"
+	rm -f "$sin" "$sout"
+}
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+iptables -V > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run all tests without iptables tool"
+	exit $ksft_skip
+fi
+
+ip6tables -V > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run all tests without ip6tables tool"
+	exit $ksft_skip
+fi
+
+check_mark()
+{
+	local ns=$1
+	local af=$2
+
+	local tables=iptables
+
+	if [ $af -eq 6 ];then
+		tables=ip6tables
+	fi
+
+	local counters values
+	counters=$(ip netns exec $ns $tables -v -L OUTPUT | grep DROP)
+	values=${counters%DROP*}
+
+	local v
+	for v in $values; do
+		if [ $v -ne 0 ]; then
+			echo "FAIL: got $tables $values in ns $ns , not 0 - not all expected packets marked" 1>&2
+			return 1
+		fi
+	done
+
+	return 0
+}
+
+print_file_err()
+{
+	ls -l "$1" 1>&2
+	echo "Trailing bytes are: "
+	tail -c 27 "$1"
+}
+
+check_transfer()
+{
+	local in=$1
+	local out=$2
+	local what=$3
+
+	cmp "$in" "$out" > /dev/null 2>&1
+	if [ $? -ne 0 ] ;then
+		echo "[ FAIL ] $what does not match (in, out):"
+		print_file_err "$in"
+		print_file_err "$out"
+		ret=1
+
+		return 1
+	fi
+
+	return 0
+}
+
+# $1: IP address
+is_v6()
+{
+	[ -z "${1##*:*}" ]
+}
+
+do_transfer()
+{
+	local listener_ns="$1"
+	local connector_ns="$2"
+	local cl_proto="$3"
+	local srv_proto="$4"
+	local connect_addr="$5"
+
+	local port=12001
+
+	:> "$cout"
+	:> "$sout"
+
+	local mptcp_connect="./mptcp_connect -r 20"
+
+	local local_addr
+	if is_v6 "${connect_addr}"; then
+		local_addr="::"
+	else
+		local_addr="0.0.0.0"
+	fi
+
+	timeout ${timeout_test} \
+		ip netns exec ${listener_ns} \
+			$mptcp_connect -t ${timeout_poll} -l -M 1 -p $port -s ${srv_proto} -c TIMESTAMPNS,TCPINQ \
+				${local_addr} < "$sin" > "$sout" &
+	local spid=$!
+
+	sleep 1
+
+	timeout ${timeout_test} \
+		ip netns exec ${connector_ns} \
+			$mptcp_connect -t ${timeout_poll} -M 2 -p $port -s ${cl_proto} -c TIMESTAMPNS,TCPINQ \
+				$connect_addr < "$cin" > "$cout" &
+
+	local cpid=$!
+
+	wait $cpid
+	local retc=$?
+	wait $spid
+	local rets=$?
+
+	if [ ${rets} -ne 0 ] || [ ${retc} -ne 0 ]; then
+		echo " client exit code $retc, server $rets" 1>&2
+		echo -e "\nnetns ${listener_ns} socket stat for ${port}:" 1>&2
+		ip netns exec ${listener_ns} ss -Menita 1>&2 -o "sport = :$port"
+
+		echo -e "\nnetns ${connector_ns} socket stat for ${port}:" 1>&2
+		ip netns exec ${connector_ns} ss -Menita 1>&2 -o "dport = :$port"
+
+		ret=1
+		return 1
+	fi
+
+	if [ $local_addr = "::" ];then
+		check_mark $listener_ns 6
+		check_mark $connector_ns 6
+	else
+		check_mark $listener_ns 4
+		check_mark $connector_ns 4
+	fi
+
+	check_transfer $cin $sout "file received by server"
+
+	rets=$?
+
+	if [ $retc -eq 0 ] && [ $rets -eq 0 ];then
+		return 0
+	fi
+
+	return 1
+}
+
+make_file()
+{
+	local name=$1
+	local who=$2
+	local size=$3
+
+	dd if=/dev/urandom of="$name" bs=1024 count=$size 2> /dev/null
+	echo -e "\nMPTCP_TEST_FILE_END_MARKER" >> "$name"
+
+	echo "Created $name (size $size KB) containing data sent by $who"
+}
+
+do_mptcp_sockopt_tests()
+{
+	local lret=0
+
+	ip netns exec "$ns_sbox" ./mptcp_sockopt
+	lret=$?
+
+	if [ $lret -ne 0 ]; then
+		echo "FAIL: SOL_MPTCP getsockopt" 1>&2
+		ret=$lret
+		return
+	fi
+
+	ip netns exec "$ns_sbox" ./mptcp_sockopt -6
+	lret=$?
+
+	if [ $lret -ne 0 ]; then
+		echo "FAIL: SOL_MPTCP getsockopt (ipv6)" 1>&2
+		ret=$lret
+		return
+	fi
+}
+
+run_tests()
+{
+	local listener_ns="$1"
+	local connector_ns="$2"
+	local connect_addr="$3"
+	local lret=0
+
+	do_transfer ${listener_ns} ${connector_ns} MPTCP MPTCP ${connect_addr}
+
+	lret=$?
+
+	if [ $lret -ne 0 ]; then
+		ret=$lret
+		return
+	fi
+}
+
+do_tcpinq_test()
+{
+	ip netns exec "$ns_sbox" ./mptcp_inq "$@"
+	local lret=$?
+	if [ $lret -ne 0 ];then
+		ret=$lret
+		echo "FAIL: mptcp_inq $@" 1>&2
+		return $lret
+	fi
+
+	echo "PASS: TCP_INQ cmsg/ioctl $@"
+	return $lret
+}
+
+do_tcpinq_tests()
+{
+	local lret=0
+
+	local args
+	for args in "-t tcp" "-r tcp"; do
+		do_tcpinq_test $args
+		lret=$?
+		if [ $lret -ne 0 ] ; then
+			return $lret
+		fi
+		do_tcpinq_test -6 $args
+		lret=$?
+		if [ $lret -ne 0 ] ; then
+			return $lret
+		fi
+	done
+
+	do_tcpinq_test -r tcp -t tcp
+
+	return $?
+}
+
+sin=$(mktemp)
+sout=$(mktemp)
+cin=$(mktemp)
+cout=$(mktemp)
+init
+make_file "$cin" "client" 1
+make_file "$sin" "server" 1
+trap cleanup EXIT
+
+run_tests $ns1 $ns2 10.0.1.1
+run_tests $ns1 $ns2 dead:beef:1::1
+
+if [ $ret -eq 0 ];then
+	echo "PASS: all packets had packet mark set"
+fi
+
+do_mptcp_sockopt_tests
+if [ $ret -eq 0 ];then
+	echo "PASS: SOL_MPTCP getsockopt has expected information"
+fi
+
+do_tcpinq_tests
+exit $ret