Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 245 insertions, 0 deletions

diff --git a/tools/testing/selftests/powerpc/eeh/eeh-functions.sh b/tools/testing/selftests/powerpc/eeh/eeh-functions.sh
new file mode 100644
index 000000000..70daa3925
--- /dev/null
+++ b/tools/testing/selftests/powerpc/eeh/eeh-functions.sh
@@ -0,0 +1,245 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-only
+
+export KSELFTESTS_SKIP=4
+
+log() {
+	echo >/dev/stderr $*
+}
+
+pe_ok() {
+	local dev="$1"
+	local path="/sys/bus/pci/devices/$dev/eeh_pe_state"
+
+	# if a driver doesn't support the error handling callbacks then the
+	# device is recovered by removing and re-probing it. This causes the
+	# sysfs directory to disappear so read the PE state once and squash
+	# any potential error messages
+	local eeh_state="$(cat $path 2>/dev/null)"
+	if [ -z "$eeh_state" ]; then
+		return 1;
+	fi
+
+	local fw_state="$(echo $eeh_state | cut -d' ' -f1)"
+	local sw_state="$(echo $eeh_state | cut -d' ' -f2)"
+
+	# If EEH_PE_ISOLATED or EEH_PE_RECOVERING are set then the PE is in an
+	# error state or being recovered. Either way, not ok.
+	if [ "$((sw_state & 0x3))" -ne 0 ] ; then
+		return 1
+	fi
+
+	# A functioning PE should have the EEH_STATE_MMIO_ACTIVE and
+	# EEH_STATE_DMA_ACTIVE flags set. For some goddamn stupid reason
+	# the platform backends set these when the PE is in reset. The
+	# RECOVERING check above should stop any false positives though.
+	if [ "$((fw_state & 0x18))" -ne "$((0x18))" ] ; then
+		return 1
+	fi
+
+	return 0;
+}
+
+eeh_supported() {
+	test -e /proc/powerpc/eeh && \
+	grep -q 'EEH Subsystem is enabled' /proc/powerpc/eeh
+}
+
+eeh_test_prep() {
+	if ! eeh_supported ; then
+		echo "EEH not supported on this system, skipping"
+		exit $KSELFTESTS_SKIP;
+	fi
+
+	if [ ! -e "/sys/kernel/debug/powerpc/eeh_dev_check" ] && \
+	   [ ! -e "/sys/kernel/debug/powerpc/eeh_dev_break" ] ; then
+		log "debugfs EEH testing files are missing. Is debugfs mounted?"
+		exit $KSELFTESTS_SKIP;
+	fi
+
+	# Bump the max freeze count to something absurd so we don't
+	# trip over it while breaking things.
+	echo 5000 > /sys/kernel/debug/powerpc/eeh_max_freezes
+}
+
+eeh_can_break() {
+	# skip bridges since we can't recover them (yet...)
+	if [ -e "/sys/bus/pci/devices/$dev/pci_bus" ] ; then
+		log "$dev, Skipped: bridge"
+		return 1;
+	fi
+
+	# The ahci driver doesn't support error recovery. If the ahci device
+	# happens to be hosting the root filesystem, and then we go and break
+	# it the system will generally go down. We should probably fix that
+	# at some point
+	if [ "ahci" = "$(basename $(realpath /sys/bus/pci/devices/$dev/driver))" ] ; then
+		log "$dev, Skipped: ahci doesn't support recovery"
+		return 1;
+	fi
+
+	# Don't inject errosr into an already-frozen PE. This happens with
+	# PEs that contain multiple PCI devices (e.g. multi-function cards)
+	# and injecting new errors during the recovery process will probably
+	# result in the recovery failing and the device being marked as
+	# failed.
+	if ! pe_ok $dev ; then
+		log "$dev, Skipped: Bad initial PE state"
+		return 1;
+	fi
+
+	return 0
+}
+
+eeh_one_dev() {
+	local dev="$1"
+
+	# Using this function from the command line is sometimes useful for
+	# testing so check that the argument is a well-formed sysfs device
+	# name.
+	if ! test -e /sys/bus/pci/devices/$dev/ ; then
+		log "Error: '$dev' must be a sysfs device name (DDDD:BB:DD.F)"
+		return 1;
+	fi
+
+	# Break it
+	echo $dev >/sys/kernel/debug/powerpc/eeh_dev_break
+
+	# Force an EEH device check. If the kernel has already
+	# noticed the EEH (due to a driver poll or whatever), this
+	# is a no-op.
+	echo $dev >/sys/kernel/debug/powerpc/eeh_dev_check
+
+	# Default to a 60s timeout when waiting for a device to recover. This
+	# is an arbitrary default which can be overridden by setting the
+	# EEH_MAX_WAIT environmental variable when required.
+
+	# The current record holder for longest recovery time is:
+	#  "Adaptec Series 8 12G SAS/PCIe 3" at 39 seconds
+	max_wait=${EEH_MAX_WAIT:=60}
+
+	for i in `seq 0 ${max_wait}` ; do
+		if pe_ok $dev ; then
+			break;
+		fi
+		log "$dev, waited $i/${max_wait}"
+		sleep 1
+	done
+
+	if ! pe_ok $dev ; then
+		log "$dev, Failed to recover!"
+		return 1;
+	fi
+
+	log "$dev, Recovered after $i seconds"
+	return 0;
+}
+
+eeh_has_driver() {
+	test -e /sys/bus/pci/devices/$1/driver;
+	return $?
+}
+
+eeh_can_recover() {
+	# we'll get an IO error if the device's current driver doesn't support
+	# error recovery
+	echo $1 > '/sys/kernel/debug/powerpc/eeh_dev_can_recover' 2>/dev/null
+
+	return $?
+}
+
+eeh_find_all_pfs() {
+	devices=""
+
+	# SR-IOV on pseries requires hypervisor support, so check for that
+	is_pseries=""
+	if grep -q pSeries /proc/cpuinfo ; then
+		if [ ! -f /proc/device-tree/rtas/ibm,open-sriov-allow-unfreeze ] ||
+		   [ ! -f /proc/device-tree/rtas/ibm,open-sriov-map-pe-number ] ; then
+			return 1;
+		fi
+
+		is_pseries="true"
+	fi
+
+	for dev in `ls -1 /sys/bus/pci/devices/` ; do
+		sysfs="/sys/bus/pci/devices/$dev"
+		if [ ! -e "$sysfs/sriov_numvfs" ] ; then
+			continue
+		fi
+
+		# skip unsupported PFs on pseries
+		if [ -z "$is_pseries" ] &&
+		   [ ! -f "$sysfs/of_node/ibm,is-open-sriov-pf" ] &&
+		   [ ! -f "$sysfs/of_node/ibm,open-sriov-vf-bar-info" ] ; then
+			continue;
+		fi
+
+		# no driver, no vfs
+		if ! eeh_has_driver $dev ; then
+			continue
+		fi
+
+		devices="$devices $dev"
+	done
+
+	if [ -z "$devices" ] ; then
+		return 1;
+	fi
+
+	echo $devices
+	return 0;
+}
+
+# attempts to enable one VF on each PF so we can do VF specific tests.
+# stdout: list of enabled VFs, one per line
+# return code: 0 if vfs are found, 1 otherwise
+eeh_enable_vfs() {
+	pf_list="$(eeh_find_all_pfs)"
+
+	vfs=0
+	for dev in $pf_list ; do
+		pf_sysfs="/sys/bus/pci/devices/$dev"
+
+		# make sure we have a single VF
+		echo 0 > "$pf_sysfs/sriov_numvfs"
+		echo 1 > "$pf_sysfs/sriov_numvfs"
+		if [ "$?" != 0 ] ; then
+			log "Unable to enable VFs on $pf, skipping"
+			continue;
+		fi
+
+		vf="$(basename $(realpath "$pf_sysfs/virtfn0"))"
+		if [ $? != 0 ] ; then
+			log "unable to find enabled vf on $pf"
+			echo 0 > "$pf_sysfs/sriov_numvfs"
+			continue;
+		fi
+
+		if ! eeh_can_break $vf ; then
+			log "skipping "
+
+			echo 0 > "$pf_sysfs/sriov_numvfs"
+			continue;
+		fi
+
+		vfs="$((vfs + 1))"
+		echo $vf
+	done
+
+	test "$vfs" != 0
+	return $?
+}
+
+eeh_disable_vfs() {
+	pf_list="$(eeh_find_all_pfs)"
+	if [ -z "$pf_list" ] ; then
+		return 1;
+	fi
+
+	for dev in $pf_list ; do
+		echo 0 > "/sys/bus/pci/devices/$dev/sriov_numvfs"
+	done
+
+	return 0;
+}