Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 145 insertions, 0 deletions

diff --git a/tools/testing/selftests/powerpc/math/vsx_preempt.c b/tools/testing/selftests/powerpc/math/vsx_preempt.c
new file mode 100644
index 000000000..d1601bb88
--- /dev/null
+++ b/tools/testing/selftests/powerpc/math/vsx_preempt.c
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2015, Cyril Bur, IBM Corp.
+ *
+ * This test attempts to see if the VSX registers change across preemption.
+ * There is no way to be sure preemption happened so this test just
+ * uses many threads and a long wait. As such, a successful test
+ * doesn't mean much but a failure is bad.
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/syscall.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <stdlib.h>
+#include <pthread.h>
+
+#include "utils.h"
+
+/* Time to wait for workers to get preempted (seconds) */
+#define PREEMPT_TIME 20
+/*
+ * Factor by which to multiply number of online CPUs for total number of
+ * worker threads
+ */
+#define THREAD_FACTOR 8
+
+/*
+ * Ensure there is twice the number of non-volatile VMX regs!
+ * check_vmx() is going to use the other half as space to put the live
+ * registers before calling vsx_memcmp()
+ */
+__thread vector int varray[24] = {
+	{1, 2, 3, 4 }, {5, 6, 7, 8 }, {9, 10,11,12},
+	{13,14,15,16}, {17,18,19,20}, {21,22,23,24},
+	{25,26,27,28}, {29,30,31,32}, {33,34,35,36},
+	{37,38,39,40}, {41,42,43,44}, {45,46,47,48}
+};
+
+int threads_starting;
+int running;
+
+extern long preempt_vsx(vector int *varray, int *threads_starting, int *running);
+
+long vsx_memcmp(vector int *a) {
+	vector int zero = {0, 0, 0, 0};
+	int i;
+
+	FAIL_IF(a != varray);
+
+	for(i = 0; i < 12; i++) {
+		if (memcmp(&a[i + 12], &zero, sizeof(vector int)) == 0) {
+			fprintf(stderr, "Detected zero from the VSX reg %d\n", i + 12);
+			return 2;
+		}
+	}
+
+	if (memcmp(a, &a[12], 12 * sizeof(vector int))) {
+		long *p = (long *)a;
+		fprintf(stderr, "VSX mismatch\n");
+		for (i = 0; i < 24; i=i+2)
+			fprintf(stderr, "%d: 0x%08lx%08lx | 0x%08lx%08lx\n",
+					i/2 + i%2 + 20, p[i], p[i + 1], p[i + 24], p[i + 25]);
+		return 1;
+	}
+	return 0;
+}
+
+void *preempt_vsx_c(void *p)
+{
+	int i, j;
+	long rc;
+	srand(pthread_self());
+	for (i = 0; i < 12; i++)
+		for (j = 0; j < 4; j++) {
+			varray[i][j] = rand();
+			/* Don't want zero because it hides kernel problems */
+			if (varray[i][j] == 0)
+				j--;
+		}
+	rc = preempt_vsx(varray, &threads_starting, &running);
+	if (rc == 2)
+		fprintf(stderr, "Caught zeros in VSX compares\n");
+	return (void *)rc;
+}
+
+int test_preempt_vsx(void)
+{
+	int i, rc, threads;
+	pthread_t *tids;
+
+	SKIP_IF(!have_hwcap(PPC_FEATURE_HAS_VSX));
+
+	threads = sysconf(_SC_NPROCESSORS_ONLN) * THREAD_FACTOR;
+	tids = malloc(threads * sizeof(pthread_t));
+	FAIL_IF(!tids);
+
+	running = true;
+	threads_starting = threads;
+	for (i = 0; i < threads; i++) {
+		rc = pthread_create(&tids[i], NULL, preempt_vsx_c, NULL);
+		FAIL_IF(rc);
+	}
+
+	setbuf(stdout, NULL);
+	/* Not really nessesary but nice to wait for every thread to start */
+	printf("\tWaiting for %d workers to start...", threads_starting);
+	while(threads_starting)
+		asm volatile("": : :"memory");
+	printf("done\n");
+
+	printf("\tWaiting for %d seconds to let some workers get preempted...", PREEMPT_TIME);
+	sleep(PREEMPT_TIME);
+	printf("done\n");
+
+	printf("\tStopping workers...");
+	/*
+	 * Working are checking this value every loop. In preempt_vsx 'cmpwi r5,0; bne 2b'.
+	 * r5 will have loaded the value of running.
+	 */
+	running = 0;
+	for (i = 0; i < threads; i++) {
+		void *rc_p;
+		pthread_join(tids[i], &rc_p);
+
+		/*
+		 * Harness will say the fail was here, look at why preempt_vsx
+		 * returned
+		 */
+		if ((long) rc_p)
+			printf("oops\n");
+		FAIL_IF((long) rc_p);
+	}
+	printf("done\n");
+
+	return 0;
+}
+
+int main(int argc, char *argv[])
+{
+	return test_harness(test_preempt_vsx, "vsx_preempt");
+}