Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 185 insertions, 0 deletions

diff --git a/tools/testing/selftests/powerpc/tm/tm-signal-context-chk-vsx.c b/tools/testing/selftests/powerpc/tm/tm-signal-context-chk-vsx.c
new file mode 100644
index 000000000..9bd869245
--- /dev/null
+++ b/tools/testing/selftests/powerpc/tm/tm-signal-context-chk-vsx.c
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2016, Cyril Bur, IBM Corp.
+ *
+ * Test the kernel's signal frame code.
+ *
+ * The kernel sets up two sets of ucontexts if the signal was to be
+ * delivered while the thread was in a transaction (referred too as
+ * first and second contexts).
+ * Expected behaviour is that the checkpointed state is in the user
+ * context passed to the signal handler (first context). The speculated
+ * state can be accessed with the uc_link pointer (second context).
+ *
+ * The rationale for this is that if TM unaware code (which linked
+ * against TM libs) installs a signal handler it will not know of the
+ * speculative nature of the 'live' registers and may infer the wrong
+ * thing.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <signal.h>
+#include <unistd.h>
+
+#include <altivec.h>
+
+#include "utils.h"
+#include "tm.h"
+
+#define MAX_ATTEMPT 500000
+
+#define NV_VSX_REGS 12 /* Number of VSX registers to check. */
+#define VSX20 20 /* First VSX register to check in vsr20-vsr31 subset */
+#define FPR20 20 /* FPR20 overlaps VSX20 most significant doubleword */
+
+long tm_signal_self_context_load(pid_t pid, long *gprs, double *fps, vector int *vms, vector int *vss);
+
+static sig_atomic_t fail, broken;
+
+/* Test only 12 vsx registers from vsr20 to vsr31 */
+vector int vsxs[] = {
+	/* First context will be set with these values, i.e. non-speculative */
+	/* VSX20     ,  VSX21      , ... */
+	{ 1, 2, 3, 4},{ 5, 6, 7, 8},{ 9,10,11,12},
+	{13,14,15,16},{17,18,19,20},{21,22,23,24},
+	{25,26,27,28},{29,30,31,32},{33,34,35,36},
+	{37,38,39,40},{41,42,43,44},{45,46,47,48},
+	/* Second context will be set with these values, i.e. speculative */
+	/* VSX20         ,  VSX21          , ... */
+	{-1, -2, -3, -4 },{-5, -6, -7, -8 },{-9, -10,-11,-12},
+	{-13,-14,-15,-16},{-17,-18,-19,-20},{-21,-22,-23,-24},
+	{-25,-26,-27,-28},{-29,-30,-31,-32},{-33,-34,-35,-36},
+	{-37,-38,-39,-40},{-41,-42,-43,-44},{-45,-46,-47,-48}
+};
+
+static void signal_usr1(int signum, siginfo_t *info, void *uc)
+{
+	int i, j;
+	uint8_t vsx[sizeof(vector int)];
+	uint8_t vsx_tm[sizeof(vector int)];
+	ucontext_t *ucp = uc;
+	ucontext_t *tm_ucp = ucp->uc_link;
+
+	/*
+	 * FP registers and VMX registers overlap the VSX registers.
+	 *
+	 * FP registers (f0-31) overlap the most significant 64 bits of VSX
+	 * registers vsr0-31, whilst VMX registers vr0-31, being 128-bit like
+	 * the VSX registers, overlap fully the other half of VSX registers,
+	 * i.e. vr0-31 overlaps fully vsr32-63.
+	 *
+	 * Due to compatibility and historical reasons (VMX/Altivec support
+	 * appeared first on the architecture), VMX registers vr0-31 (so VSX
+	 * half vsr32-63 too) are stored right after the v_regs pointer, in an
+	 * area allocated for 'vmx_reverse' array (please see
+	 * arch/powerpc/include/uapi/asm/sigcontext.h for details about the
+	 * mcontext_t structure on Power).
+	 *
+	 * The other VSX half (vsr0-31) is hence stored below vr0-31/vsr32-63
+	 * registers, but only the least significant 64 bits of vsr0-31. The
+	 * most significant 64 bits of vsr0-31 (f0-31), as it overlaps the FP
+	 * registers, is kept in fp_regs.
+	 *
+	 * v_regs is a 16 byte aligned pointer at the start of vmx_reserve
+	 * (vmx_reserve may or may not be 16 aligned) where the v_regs structure
+	 * exists, so v_regs points to where vr0-31 / vsr32-63 registers are
+	 * fully stored. Since v_regs type is elf_vrregset_t, v_regs + 1
+	 * skips all the slots used to store vr0-31 / vsr32-64 and points to
+	 * part of one VSX half, i.e. v_regs + 1 points to the least significant
+	 * 64 bits of vsr0-31. The other part of this half (the most significant
+	 * part of vsr0-31) is stored in fp_regs.
+	 *
+	 */
+	/* Get pointer to least significant doubleword of vsr0-31 */
+	long *vsx_ptr = (long *)(ucp->uc_mcontext.v_regs + 1);
+	long *tm_vsx_ptr = (long *)(tm_ucp->uc_mcontext.v_regs + 1);
+
+	/* Check first context. Print all mismatches. */
+	for (i = 0; i < NV_VSX_REGS; i++) {
+		/*
+		 * Copy VSX most significant doubleword from fp_regs and
+		 * copy VSX least significant one from 64-bit slots below
+		 * saved VMX registers.
+		 */
+		memcpy(vsx, &ucp->uc_mcontext.fp_regs[FPR20 + i], 8);
+		memcpy(vsx + 8, &vsx_ptr[VSX20 + i], 8);
+
+		fail = memcmp(vsx, &vsxs[i], sizeof(vector int));
+
+		if (fail) {
+			broken = 1;
+			printf("VSX%d (1st context) == 0x", VSX20 + i);
+			for (j = 0; j < 16; j++)
+				printf("%02x", vsx[j]);
+			printf(" instead of 0x");
+			for (j = 0; j < 4; j++)
+				printf("%08x", vsxs[i][j]);
+			printf(" (expected)\n");
+		}
+	}
+
+	/* Check second context. Print all mismatches. */
+	for (i = 0; i < NV_VSX_REGS; i++) {
+		/*
+		 * Copy VSX most significant doubleword from fp_regs and
+		 * copy VSX least significant one from 64-bit slots below
+		 * saved VMX registers.
+		 */
+		memcpy(vsx_tm, &tm_ucp->uc_mcontext.fp_regs[FPR20 + i], 8);
+		memcpy(vsx_tm + 8, &tm_vsx_ptr[VSX20 + i], 8);
+
+		fail = memcmp(vsx_tm, &vsxs[NV_VSX_REGS + i], sizeof(vector int));
+
+		if (fail) {
+			broken = 1;
+			printf("VSX%d (2nd context) == 0x", VSX20 + i);
+			for (j = 0; j < 16; j++)
+				printf("%02x", vsx_tm[j]);
+			printf(" instead of 0x");
+			for (j = 0; j < 4; j++)
+				printf("%08x", vsxs[NV_VSX_REGS + i][j]);
+			printf("(expected)\n");
+		}
+	}
+}
+
+static int tm_signal_context_chk()
+{
+	struct sigaction act;
+	int i;
+	long rc;
+	pid_t pid = getpid();
+
+	SKIP_IF(!have_htm());
+	SKIP_IF(htm_is_synthetic());
+
+	act.sa_sigaction = signal_usr1;
+	sigemptyset(&act.sa_mask);
+	act.sa_flags = SA_SIGINFO;
+	if (sigaction(SIGUSR1, &act, NULL) < 0) {
+		perror("sigaction sigusr1");
+		exit(1);
+	}
+
+	i = 0;
+	while (i < MAX_ATTEMPT && !broken) {
+               /*
+                * tm_signal_self_context_load will set both first and second
+                * contexts accordingly to the values passed through non-NULL
+                * array pointers to it, in that case 'vsxs', and invoke the
+                * signal handler installed for SIGUSR1.
+                */
+		rc = tm_signal_self_context_load(pid, NULL, NULL, NULL, vsxs);
+		FAIL_IF(rc != pid);
+		i++;
+	}
+
+	return (broken);
+}
+
+int main(void)
+{
+	return test_harness(tm_signal_context_chk, "tm_signal_context_chk_vsx");
+}