Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 274 insertions, 0 deletions

diff --git a/tools/testing/selftests/rcutorture/bin/kvm-remote.sh b/tools/testing/selftests/rcutorture/bin/kvm-remote.sh
new file mode 100755
index 000000000..a2328163e
--- /dev/null
+++ b/tools/testing/selftests/rcutorture/bin/kvm-remote.sh
@@ -0,0 +1,274 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Run a series of tests on remote systems under KVM.
+#
+# Usage: kvm-remote.sh "systems" [ <kvm.sh args> ]
+#	 kvm-remote.sh "systems" /path/to/old/run [ <kvm-again.sh args> ]
+#
+# Copyright (C) 2021 Facebook, Inc.
+#
+# Authors: Paul E. McKenney <paulmck@kernel.org>
+
+scriptname=$0
+args="$*"
+
+if ! test -d tools/testing/selftests/rcutorture/bin
+then
+	echo $scriptname must be run from top-level directory of kernel source tree.
+	exit 1
+fi
+
+RCUTORTURE="`pwd`/tools/testing/selftests/rcutorture"; export RCUTORTURE
+PATH=${RCUTORTURE}/bin:$PATH; export PATH
+. functions.sh
+
+starttime="`get_starttime`"
+
+systems="$1"
+if test -z "$systems"
+then
+	echo $scriptname: Empty list of systems will go nowhere good, giving up.
+	exit 1
+fi
+shift
+
+# Pathnames:
+# T:	  /tmp/kvm-remote.sh.NNNNNN where "NNNNNN" is set by mktemp
+# resdir: /tmp/kvm-remote.sh.NNNNNN/res
+# rundir: /tmp/kvm-remote.sh.NNNNNN/res/$ds ("-remote" suffix)
+# oldrun: `pwd`/tools/testing/.../res/$otherds
+#
+# Pathname segments:
+# TD:	  kvm-remote.sh.NNNNNN
+# ds:	  yyyy.mm.dd-hh.mm.ss-remote
+
+T="`mktemp -d ${TMPDIR-/tmp}/kvm-remote.sh.XXXXXX`"
+trap 'rm -rf $T' 0
+TD="`basename "$T"`"
+
+resdir="$T/res"
+ds=`date +%Y.%m.%d-%H.%M.%S`-remote
+rundir=$resdir/$ds
+echo Results directory: $rundir
+echo $scriptname $args
+if echo $1 | grep -q '^--'
+then
+	# Fresh build.  Create a datestamp unless the caller supplied one.
+	datestamp="`echo "$@" | awk -v ds="$ds" '{
+		for (i = 1; i < NF; i++) {
+			if ($i == "--datestamp") {
+				ds = "";
+				break;
+			}
+		}
+		if (ds != "")
+			print "--datestamp " ds;
+	}'`"
+	kvm.sh --remote "$@" $datestamp --buildonly > $T/kvm.sh.out 2>&1
+	ret=$?
+	if test "$ret" -ne 0
+	then
+		echo $scriptname: kvm.sh failed exit code $?
+		cat $T/kvm.sh.out
+		exit 2
+	fi
+	oldrun="`grep -m 1 "^Results directory: " $T/kvm.sh.out | awk '{ print $3 }'`"
+	touch "$oldrun/remote-log"
+	echo $scriptname $args >> "$oldrun/remote-log"
+	echo | tee -a "$oldrun/remote-log"
+	echo " ----" kvm.sh output: "(`date`)" | tee -a "$oldrun/remote-log"
+	cat $T/kvm.sh.out | tee -a "$oldrun/remote-log"
+	# We are going to run this, so remove the buildonly files.
+	rm -f "$oldrun"/*/buildonly
+	kvm-again.sh $oldrun --dryrun --remote --rundir "$rundir" > $T/kvm-again.sh.out 2>&1
+	ret=$?
+	if test "$ret" -ne 0
+	then
+		echo $scriptname: kvm-again.sh failed exit code $? | tee -a "$oldrun/remote-log"
+		cat $T/kvm-again.sh.out | tee -a "$oldrun/remote-log"
+		exit 2
+	fi
+else
+	# Re-use old run.
+	oldrun="$1"
+	if ! echo $oldrun | grep -q '^/'
+	then
+		oldrun="`pwd`/$oldrun"
+	fi
+	shift
+	touch "$oldrun/remote-log"
+	echo $scriptname $args >> "$oldrun/remote-log"
+	kvm-again.sh "$oldrun" "$@" --dryrun --remote --rundir "$rundir" > $T/kvm-again.sh.out 2>&1
+	ret=$?
+	if test "$ret" -ne 0
+	then
+		echo $scriptname: kvm-again.sh failed exit code $? | tee -a "$oldrun/remote-log"
+		cat $T/kvm-again.sh.out | tee -a "$oldrun/remote-log"
+		exit 2
+	fi
+	cp -a "$rundir" "$RCUTORTURE/res/"
+	oldrun="$RCUTORTURE/res/$ds"
+fi
+echo | tee -a "$oldrun/remote-log"
+echo " ----" kvm-again.sh output: "(`date`)" | tee -a "$oldrun/remote-log"
+cat $T/kvm-again.sh.out
+echo | tee -a "$oldrun/remote-log"
+echo Remote run directory: $rundir | tee -a "$oldrun/remote-log"
+echo Local build-side run directory: $oldrun | tee -a "$oldrun/remote-log"
+
+# Create the kvm-remote-N.sh scripts in the bin directory.
+awk < "$rundir"/scenarios -v dest="$T/bin" -v rundir="$rundir" '
+{
+	n = $1;
+	sub(/\./, "", n);
+	fn = dest "/kvm-remote-" n ".sh"
+	print "kvm-remote-noreap.sh " rundir " &" > fn;
+	scenarios = "";
+	for (i = 2; i <= NF; i++)
+		scenarios = scenarios " " $i;
+	print "kvm-test-1-run-batch.sh" scenarios >> fn;
+	print "sync" >> fn;
+	print "rm " rundir "/remote.run" >> fn;
+}'
+chmod +x $T/bin/kvm-remote-*.sh
+( cd "`dirname $T`"; tar -chzf $T/binres.tgz "$TD/bin" "$TD/res" )
+
+# Check first to avoid the need for cleanup for system-name typos
+for i in $systems
+do
+	ncpus="`ssh -o BatchMode=yes $i getconf _NPROCESSORS_ONLN 2> /dev/null`"
+	ret=$?
+	if test "$ret" -ne 0
+	then
+		echo System $i unreachable, giving up. | tee -a "$oldrun/remote-log"
+		exit 4
+	fi
+	echo $i: $ncpus CPUs " " `date` | tee -a "$oldrun/remote-log"
+done
+
+# Download and expand the tarball on all systems.
+echo Build-products tarball: `du -h $T/binres.tgz` | tee -a "$oldrun/remote-log"
+for i in $systems
+do
+	echo Downloading tarball to $i `date` | tee -a "$oldrun/remote-log"
+	cat $T/binres.tgz | ssh -o BatchMode=yes $i "cd /tmp; tar -xzf -"
+	ret=$?
+	tries=0
+	while test "$ret" -ne 0
+	do
+		echo Unable to download $T/binres.tgz to system $i, waiting and then retrying.  $tries prior retries. | tee -a "$oldrun/remote-log"
+		sleep 60
+		cat $T/binres.tgz | ssh -o BatchMode=yes $i "cd /tmp; tar -xzf -"
+		ret=$?
+		if test "$ret" -ne 0
+		then
+			if test "$tries" > 5
+			then
+				echo Unable to download $T/binres.tgz to system $i, giving up. | tee -a "$oldrun/remote-log"
+				exit 10
+			fi
+		fi
+		tries=$((tries+1))
+	done
+done
+
+# Function to check for presence of a file on the specified system.
+# Complain if the system cannot be reached, and retry after a wait.
+# Currently just waits forever if a machine disappears.
+#
+# Usage: checkremotefile system pathname
+checkremotefile () {
+	local ret
+	local sleeptime=60
+
+	while :
+	do
+		ssh -o BatchMode=yes $1 "test -f \"$2\""
+		ret=$?
+		if test "$ret" -eq 255
+		then
+			echo " ---" ssh failure to $1 checking for file $2, retry after $sleeptime seconds. `date` | tee -a "$oldrun/remote-log"
+		elif test "$ret" -eq 0
+		then
+			return 0
+		elif test "$ret" -eq 1
+		then
+			echo " ---" File \"$2\" not found: ssh $1 test -f \"$2\" | tee -a "$oldrun/remote-log"
+			return 1
+		else
+			echo " ---" Exit code $ret: ssh $1 test -f \"$2\", retry after $sleeptime seconds. `date` | tee -a "$oldrun/remote-log"
+			return $ret
+		fi
+		sleep $sleeptime
+	done
+}
+
+# Function to start batches on idle remote $systems
+#
+# Usage: startbatches curbatch nbatches
+#
+# Batches are numbered starting at 1.  Returns the next batch to start.
+# Be careful to redirect all debug output to FD 2 (stderr).
+startbatches () {
+	local curbatch="$1"
+	local nbatches="$2"
+	local ret
+
+	# Each pass through the following loop examines one system.
+	for i in $systems
+	do
+		if test "$curbatch" -gt "$nbatches"
+		then
+			echo $((nbatches + 1))
+			return 0
+		fi
+		if checkremotefile "$i" "$resdir/$ds/remote.run" 1>&2
+		then
+			continue # System still running last test, skip.
+		fi
+		ssh -o BatchMode=yes "$i" "cd \"$resdir/$ds\"; touch remote.run; PATH=\"$T/bin:$PATH\" nohup kvm-remote-$curbatch.sh > kvm-remote-$curbatch.sh.out 2>&1 &" 1>&2
+		ret=$?
+		if test "$ret" -ne 0
+		then
+			echo ssh $i failed: exitcode $ret 1>&2
+			exit 11
+		fi
+		echo " ----" System $i Batch `head -n $curbatch < "$rundir"/scenarios | tail -1` `date` 1>&2
+		curbatch=$((curbatch + 1))
+	done
+	echo $curbatch
+}
+
+# Launch all the scenarios.
+nbatches="`wc -l "$rundir"/scenarios | awk '{ print $1 }'`"
+curbatch=1
+while test "$curbatch" -le "$nbatches"
+do
+	startbatches $curbatch $nbatches > $T/curbatch 2> $T/startbatches.stderr
+	curbatch="`cat $T/curbatch`"
+	if test -s "$T/startbatches.stderr"
+	then
+		cat "$T/startbatches.stderr" | tee -a "$oldrun/remote-log"
+	fi
+	if test "$curbatch" -le "$nbatches"
+	then
+		sleep 30
+	fi
+done
+echo All batches started. `date` | tee -a "$oldrun/remote-log"
+
+# Wait for all remaining scenarios to complete and collect results.
+for i in $systems
+do
+	echo " ---" Waiting for $i `date` | tee -a "$oldrun/remote-log"
+	while checkremotefile "$i" "$resdir/$ds/remote.run"
+	do
+		sleep 30
+	done
+	echo " ---" Collecting results from $i `date` | tee -a "$oldrun/remote-log"
+	( cd "$oldrun"; ssh -o BatchMode=yes $i "cd $rundir; tar -czf - kvm-remote-*.sh.out */console.log */kvm-test-1-run*.sh.out */qemu[_-]pid */qemu-retval */qemu-affinity; rm -rf $T > /dev/null 2>&1" | tar -xzf - )
+done
+
+( kvm-end-run-stats.sh "$oldrun" "$starttime"; echo $? > $T/exitcode ) | tee -a "$oldrun/remote-log"
+exit "`cat $T/exitcode`"