Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 243 insertions, 0 deletions

diff --git a/tools/usb/usbip/src/usbip_attach.c b/tools/usb/usbip/src/usbip_attach.c
new file mode 100644
index 000000000..b4aeb9f1f
--- /dev/null
+++ b/tools/usb/usbip/src/usbip_attach.c
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2011 matt mooney <mfm@muteddisk.com>
+ *               2005-2007 Takahiro Hirofuchi
+ * Copyright (C) 2015-2016 Samsung Electronics
+ *               Igor Kotrasinski <i.kotrasinsk@samsung.com>
+ *               Krzysztof Opasiak <k.opasiak@samsung.com>
+ */
+
+#include <sys/stat.h>
+
+#include <limits.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <string.h>
+
+#include <fcntl.h>
+#include <getopt.h>
+#include <unistd.h>
+#include <errno.h>
+
+#include "vhci_driver.h"
+#include "usbip_common.h"
+#include "usbip_network.h"
+#include "usbip.h"
+
+static const char usbip_attach_usage_string[] =
+	"usbip attach <args>\n"
+	"    -r, --remote=<host>      The machine with exported USB devices\n"
+	"    -b, --busid=<busid>    Busid of the device on <host>\n"
+	"    -d, --device=<devid>    Id of the virtual UDC on <host>\n";
+
+void usbip_attach_usage(void)
+{
+	printf("usage: %s", usbip_attach_usage_string);
+}
+
+#define MAX_BUFF 100
+static int record_connection(char *host, char *port, char *busid, int rhport)
+{
+	int fd;
+	char path[PATH_MAX+1];
+	char buff[MAX_BUFF+1];
+	int ret;
+
+	ret = mkdir(VHCI_STATE_PATH, 0700);
+	if (ret < 0) {
+		/* if VHCI_STATE_PATH exists, then it better be a directory */
+		if (errno == EEXIST) {
+			struct stat s;
+
+			ret = stat(VHCI_STATE_PATH, &s);
+			if (ret < 0)
+				return -1;
+			if (!(s.st_mode & S_IFDIR))
+				return -1;
+		} else
+			return -1;
+	}
+
+	snprintf(path, PATH_MAX, VHCI_STATE_PATH"/port%d", rhport);
+
+	fd = open(path, O_WRONLY|O_CREAT|O_TRUNC, S_IRWXU);
+	if (fd < 0)
+		return -1;
+
+	snprintf(buff, MAX_BUFF, "%s %s %s\n",
+			host, port, busid);
+
+	ret = write(fd, buff, strlen(buff));
+	if (ret != (ssize_t) strlen(buff)) {
+		close(fd);
+		return -1;
+	}
+
+	close(fd);
+
+	return 0;
+}
+
+static int import_device(int sockfd, struct usbip_usb_device *udev)
+{
+	int rc;
+	int port;
+	uint32_t speed = udev->speed;
+
+	rc = usbip_vhci_driver_open();
+	if (rc < 0) {
+		err("open vhci_driver");
+		goto err_out;
+	}
+
+	do {
+		port = usbip_vhci_get_free_port(speed);
+		if (port < 0) {
+			err("no free port");
+			goto err_driver_close;
+		}
+
+		dbg("got free port %d", port);
+
+		rc = usbip_vhci_attach_device(port, sockfd, udev->busnum,
+					      udev->devnum, udev->speed);
+		if (rc < 0 && errno != EBUSY) {
+			err("import device");
+			goto err_driver_close;
+		}
+	} while (rc < 0);
+
+	usbip_vhci_driver_close();
+
+	return port;
+
+err_driver_close:
+	usbip_vhci_driver_close();
+err_out:
+	return -1;
+}
+
+static int query_import_device(int sockfd, char *busid)
+{
+	int rc;
+	struct op_import_request request;
+	struct op_import_reply   reply;
+	uint16_t code = OP_REP_IMPORT;
+	int status;
+
+	memset(&request, 0, sizeof(request));
+	memset(&reply, 0, sizeof(reply));
+
+	/* send a request */
+	rc = usbip_net_send_op_common(sockfd, OP_REQ_IMPORT, 0);
+	if (rc < 0) {
+		err("send op_common");
+		return -1;
+	}
+
+	strncpy(request.busid, busid, SYSFS_BUS_ID_SIZE-1);
+
+	PACK_OP_IMPORT_REQUEST(0, &request);
+
+	rc = usbip_net_send(sockfd, (void *) &request, sizeof(request));
+	if (rc < 0) {
+		err("send op_import_request");
+		return -1;
+	}
+
+	/* receive a reply */
+	rc = usbip_net_recv_op_common(sockfd, &code, &status);
+	if (rc < 0) {
+		err("Attach Request for %s failed - %s\n",
+		    busid, usbip_op_common_status_string(status));
+		return -1;
+	}
+
+	rc = usbip_net_recv(sockfd, (void *) &reply, sizeof(reply));
+	if (rc < 0) {
+		err("recv op_import_reply");
+		return -1;
+	}
+
+	PACK_OP_IMPORT_REPLY(0, &reply);
+
+	/* check the reply */
+	if (strncmp(reply.udev.busid, busid, SYSFS_BUS_ID_SIZE)) {
+		err("recv different busid %s", reply.udev.busid);
+		return -1;
+	}
+
+	/* import a device */
+	return import_device(sockfd, &reply.udev);
+}
+
+static int attach_device(char *host, char *busid)
+{
+	int sockfd;
+	int rc;
+	int rhport;
+
+	sockfd = usbip_net_tcp_connect(host, usbip_port_string);
+	if (sockfd < 0) {
+		err("tcp connect");
+		return -1;
+	}
+
+	rhport = query_import_device(sockfd, busid);
+	if (rhport < 0)
+		return -1;
+
+	close(sockfd);
+
+	rc = record_connection(host, usbip_port_string, busid, rhport);
+	if (rc < 0) {
+		err("record connection");
+		return -1;
+	}
+
+	return 0;
+}
+
+int usbip_attach(int argc, char *argv[])
+{
+	static const struct option opts[] = {
+		{ "remote", required_argument, NULL, 'r' },
+		{ "busid",  required_argument, NULL, 'b' },
+		{ "device",  required_argument, NULL, 'd' },
+		{ NULL, 0,  NULL, 0 }
+	};
+	char *host = NULL;
+	char *busid = NULL;
+	int opt;
+	int ret = -1;
+
+	for (;;) {
+		opt = getopt_long(argc, argv, "d:r:b:", opts, NULL);
+
+		if (opt == -1)
+			break;
+
+		switch (opt) {
+		case 'r':
+			host = optarg;
+			break;
+		case 'd':
+		case 'b':
+			busid = optarg;
+			break;
+		default:
+			goto err_out;
+		}
+	}
+
+	if (!host || !busid)
+		goto err_out;
+
+	ret = attach_device(host, busid);
+	goto out;
+
+err_out:
+	usbip_attach_usage();
+out:
+	return ret;
+}