1 files changed, 130 insertions, 0 deletions
diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_defprio.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_defprio.sh
new file mode 100755
index 000000000..5492fa555
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/qos_defprio.sh
@@ -0,0 +1,130 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for port-default priority. Non-IP packets ingress $swp1 and are
+# prioritized according to the default priority specified at the port.
+# rx_octets_prio_* counters are used to verify the prioritization.
+#
+# +----------------------------------+
+# | H1                               |
+# |    + $h1                         |
+# |    | 192.0.2.1/28                |
+# +----|-----------------------------+
+#      |
+# +----|-----------------------------+
+# | SW |                             |
+# |    + $swp1                       |
+# |      192.0.2.2/28                |
+# |      dcb app default-prio <prio> |
+# +----------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	test_defprio
+"
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+NUM_NETIFS=2
+: ${HIT_TIMEOUT:=1000} # ms
+source $lib_dir/lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+switch_create()
+{
+	ip link set dev $swp1 up
+	ip addr add dev $swp1 192.0.2.2/28
+}
+
+switch_destroy()
+{
+	dcb app flush dev $swp1 default-prio
+	ip addr del dev $swp1 192.0.2.2/28
+	ip link set dev $swp1 down
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	vrf_prepare
+
+	h1_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.2
+}
+
+__test_defprio()
+{
+	local prio_install=$1; shift
+	local prio_observe=$1; shift
+	local key
+	local t1
+	local i
+
+	RET=0
+
+	dcb app add dev $swp1 default-prio $prio_install
+
+	local t0=$(ethtool_stats_get $swp1 rx_frames_prio_$prio_observe)
+	mausezahn -q $h1 -d 100m -c 10 -t arp reply
+	t1=$(busywait "$HIT_TIMEOUT" until_counter_is ">= $((t0 + 10))" \
+		ethtool_stats_get $swp1 rx_frames_prio_$prio_observe)
+
+	check_err $? "Default priority $prio_install/$prio_observe: Expected to capture 10 packets, got $((t1 - t0))."
+	log_test "Default priority $prio_install/$prio_observe"
+
+	dcb app del dev $swp1 default-prio $prio_install
+}
+
+test_defprio()
+{
+	local prio
+
+	for prio in {0..7}; do
+		__test_defprio $prio $prio
+	done
+
+	dcb app add dev $swp1 default-prio 3
+	__test_defprio 0 3
+	__test_defprio 1 3
+	__test_defprio 2 3
+	__test_defprio 4 4
+	__test_defprio 5 5
+	__test_defprio 6 6
+	__test_defprio 7 7
+	dcb app del dev $swp1 default-prio 3
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS