Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 339 insertions, 0 deletions

diff --git a/Documentation/admin-guide/README.rst b/Documentation/admin-guide/README.rst
new file mode 100644
index 000000000..9a969c015
--- /dev/null
+++ b/Documentation/admin-guide/README.rst
@@ -0,0 +1,339 @@
+.. _readme:
+
+Linux kernel release 6.x <http://kernel.org/>
+=============================================
+
+These are the release notes for Linux version 6.  Read them carefully,
+as they tell you what this is all about, explain how to install the
+kernel, and what to do if something goes wrong.
+
+What is Linux?
+--------------
+
+  Linux is a clone of the operating system Unix, written from scratch by
+  Linus Torvalds with assistance from a loosely-knit team of hackers across
+  the Net. It aims towards POSIX and Single UNIX Specification compliance.
+
+  It has all the features you would expect in a modern fully-fledged Unix,
+  including true multitasking, virtual memory, shared libraries, demand
+  loading, shared copy-on-write executables, proper memory management,
+  and multistack networking including IPv4 and IPv6.
+
+  It is distributed under the GNU General Public License v2 - see the
+  accompanying COPYING file for more details.
+
+On what hardware does it run?
+-----------------------------
+
+  Although originally developed first for 32-bit x86-based PCs (386 or higher),
+  today Linux also runs on (at least) the Compaq Alpha AXP, Sun SPARC and
+  UltraSPARC, Motorola 68000, PowerPC, PowerPC64, ARM, Hitachi SuperH, Cell,
+  IBM S/390, MIPS, HP PA-RISC, Intel IA-64, DEC VAX, AMD x86-64 Xtensa, and
+  ARC architectures.
+
+  Linux is easily portable to most general-purpose 32- or 64-bit architectures
+  as long as they have a paged memory management unit (PMMU) and a port of the
+  GNU C compiler (gcc) (part of The GNU Compiler Collection, GCC). Linux has
+  also been ported to a number of architectures without a PMMU, although
+  functionality is then obviously somewhat limited.
+  Linux has also been ported to itself. You can now run the kernel as a
+  userspace application - this is called UserMode Linux (UML).
+
+Documentation
+-------------
+
+ - There is a lot of documentation available both in electronic form on
+   the Internet and in books, both Linux-specific and pertaining to
+   general UNIX questions.  I'd recommend looking into the documentation
+   subdirectories on any Linux FTP site for the LDP (Linux Documentation
+   Project) books.  This README is not meant to be documentation on the
+   system: there are much better sources available.
+
+ - There are various README files in the Documentation/ subdirectory:
+   these typically contain kernel-specific installation notes for some
+   drivers for example. Please read the
+   :ref:`Documentation/process/changes.rst <changes>` file, as it
+   contains information about the problems, which may result by upgrading
+   your kernel.
+
+Installing the kernel source
+----------------------------
+
+ - If you install the full sources, put the kernel tarball in a
+   directory where you have permissions (e.g. your home directory) and
+   unpack it::
+
+     xz -cd linux-6.x.tar.xz | tar xvf -
+
+   Replace "X" with the version number of the latest kernel.
+
+   Do NOT use the /usr/src/linux area! This area has a (usually
+   incomplete) set of kernel headers that are used by the library header
+   files.  They should match the library, and not get messed up by
+   whatever the kernel-du-jour happens to be.
+
+ - You can also upgrade between 6.x releases by patching.  Patches are
+   distributed in the xz format.  To install by patching, get all the
+   newer patch files, enter the top level directory of the kernel source
+   (linux-6.x) and execute::
+
+     xz -cd ../patch-6.x.xz | patch -p1
+
+   Replace "x" for all versions bigger than the version "x" of your current
+   source tree, **in_order**, and you should be ok.  You may want to remove
+   the backup files (some-file-name~ or some-file-name.orig), and make sure
+   that there are no failed patches (some-file-name# or some-file-name.rej).
+   If there are, either you or I have made a mistake.
+
+   Unlike patches for the 6.x kernels, patches for the 6.x.y kernels
+   (also known as the -stable kernels) are not incremental but instead apply
+   directly to the base 6.x kernel.  For example, if your base kernel is 6.0
+   and you want to apply the 6.0.3 patch, you must not first apply the 6.0.1
+   and 6.0.2 patches. Similarly, if you are running kernel version 6.0.2 and
+   want to jump to 6.0.3, you must first reverse the 6.0.2 patch (that is,
+   patch -R) **before** applying the 6.0.3 patch. You can read more on this in
+   :ref:`Documentation/process/applying-patches.rst <applying_patches>`.
+
+   Alternatively, the script patch-kernel can be used to automate this
+   process.  It determines the current kernel version and applies any
+   patches found::
+
+     linux/scripts/patch-kernel linux
+
+   The first argument in the command above is the location of the
+   kernel source.  Patches are applied from the current directory, but
+   an alternative directory can be specified as the second argument.
+
+ - Make sure you have no stale .o files and dependencies lying around::
+
+     cd linux
+     make mrproper
+
+   You should now have the sources correctly installed.
+
+Software requirements
+---------------------
+
+   Compiling and running the 6.x kernels requires up-to-date
+   versions of various software packages.  Consult
+   :ref:`Documentation/process/changes.rst <changes>` for the minimum version numbers
+   required and how to get updates for these packages.  Beware that using
+   excessively old versions of these packages can cause indirect
+   errors that are very difficult to track down, so don't assume that
+   you can just update packages when obvious problems arise during
+   build or operation.
+
+Build directory for the kernel
+------------------------------
+
+   When compiling the kernel, all output files will per default be
+   stored together with the kernel source code.
+   Using the option ``make O=output/dir`` allows you to specify an alternate
+   place for the output files (including .config).
+   Example::
+
+     kernel source code: /usr/src/linux-6.x
+     build directory:    /home/name/build/kernel
+
+   To configure and build the kernel, use::
+
+     cd /usr/src/linux-6.x
+     make O=/home/name/build/kernel menuconfig
+     make O=/home/name/build/kernel
+     sudo make O=/home/name/build/kernel modules_install install
+
+   Please note: If the ``O=output/dir`` option is used, then it must be
+   used for all invocations of make.
+
+Configuring the kernel
+----------------------
+
+   Do not skip this step even if you are only upgrading one minor
+   version.  New configuration options are added in each release, and
+   odd problems will turn up if the configuration files are not set up
+   as expected.  If you want to carry your existing configuration to a
+   new version with minimal work, use ``make oldconfig``, which will
+   only ask you for the answers to new questions.
+
+ - Alternative configuration commands are::
+
+     "make config"      Plain text interface.
+
+     "make menuconfig"  Text based color menus, radiolists & dialogs.
+
+     "make nconfig"     Enhanced text based color menus.
+
+     "make xconfig"     Qt based configuration tool.
+
+     "make gconfig"     GTK+ based configuration tool.
+
+     "make oldconfig"   Default all questions based on the contents of
+                        your existing ./.config file and asking about
+                        new config symbols.
+
+     "make olddefconfig"
+                        Like above, but sets new symbols to their default
+                        values without prompting.
+
+     "make defconfig"   Create a ./.config file by using the default
+                        symbol values from either arch/$ARCH/defconfig
+                        or arch/$ARCH/configs/${PLATFORM}_defconfig,
+                        depending on the architecture.
+
+     "make ${PLATFORM}_defconfig"
+                        Create a ./.config file by using the default
+                        symbol values from
+                        arch/$ARCH/configs/${PLATFORM}_defconfig.
+                        Use "make help" to get a list of all available
+                        platforms of your architecture.
+
+     "make allyesconfig"
+                        Create a ./.config file by setting symbol
+                        values to 'y' as much as possible.
+
+     "make allmodconfig"
+                        Create a ./.config file by setting symbol
+                        values to 'm' as much as possible.
+
+     "make allnoconfig" Create a ./.config file by setting symbol
+                        values to 'n' as much as possible.
+
+     "make randconfig"  Create a ./.config file by setting symbol
+                        values to random values.
+
+     "make localmodconfig" Create a config based on current config and
+                           loaded modules (lsmod). Disables any module
+                           option that is not needed for the loaded modules.
+
+                           To create a localmodconfig for another machine,
+                           store the lsmod of that machine into a file
+                           and pass it in as a LSMOD parameter.
+
+                           Also, you can preserve modules in certain folders
+                           or kconfig files by specifying their paths in
+                           parameter LMC_KEEP.
+
+                   target$ lsmod > /tmp/mylsmod
+                   target$ scp /tmp/mylsmod host:/tmp
+
+                   host$ make LSMOD=/tmp/mylsmod \
+                           LMC_KEEP="drivers/usb:drivers/gpu:fs" \
+                           localmodconfig
+
+                           The above also works when cross compiling.
+
+     "make localyesconfig" Similar to localmodconfig, except it will convert
+                           all module options to built in (=y) options. You can
+                           also preserve modules by LMC_KEEP.
+
+     "make kvm_guest.config"   Enable additional options for kvm guest kernel
+                               support.
+
+     "make xen.config"   Enable additional options for xen dom0 guest kernel
+                         support.
+
+     "make tinyconfig"  Configure the tiniest possible kernel.
+
+   You can find more information on using the Linux kernel config tools
+   in Documentation/kbuild/kconfig.rst.
+
+ - NOTES on ``make config``:
+
+    - Having unnecessary drivers will make the kernel bigger, and can
+      under some circumstances lead to problems: probing for a
+      nonexistent controller card may confuse your other controllers.
+
+    - A kernel with math-emulation compiled in will still use the
+      coprocessor if one is present: the math emulation will just
+      never get used in that case.  The kernel will be slightly larger,
+      but will work on different machines regardless of whether they
+      have a math coprocessor or not.
+
+    - The "kernel hacking" configuration details usually result in a
+      bigger or slower kernel (or both), and can even make the kernel
+      less stable by configuring some routines to actively try to
+      break bad code to find kernel problems (kmalloc()).  Thus you
+      should probably answer 'n' to the questions for "development",
+      "experimental", or "debugging" features.
+
+Compiling the kernel
+--------------------
+
+ - Make sure you have at least gcc 5.1 available.
+   For more information, refer to :ref:`Documentation/process/changes.rst <changes>`.
+
+ - Do a ``make`` to create a compressed kernel image. It is also
+   possible to do ``make install`` if you have lilo installed to suit the
+   kernel makefiles, but you may want to check your particular lilo setup first.
+
+   To do the actual install, you have to be root, but none of the normal
+   build should require that. Don't take the name of root in vain.
+
+ - If you configured any of the parts of the kernel as ``modules``, you
+   will also have to do ``make modules_install``.
+
+ - Verbose kernel compile/build output:
+
+   Normally, the kernel build system runs in a fairly quiet mode (but not
+   totally silent).  However, sometimes you or other kernel developers need
+   to see compile, link, or other commands exactly as they are executed.
+   For this, use "verbose" build mode.  This is done by passing
+   ``V=1`` to the ``make`` command, e.g.::
+
+     make V=1 all
+
+   To have the build system also tell the reason for the rebuild of each
+   target, use ``V=2``.  The default is ``V=0``.
+
+ - Keep a backup kernel handy in case something goes wrong.  This is
+   especially true for the development releases, since each new release
+   contains new code which has not been debugged.  Make sure you keep a
+   backup of the modules corresponding to that kernel, as well.  If you
+   are installing a new kernel with the same version number as your
+   working kernel, make a backup of your modules directory before you
+   do a ``make modules_install``.
+
+   Alternatively, before compiling, use the kernel config option
+   "LOCALVERSION" to append a unique suffix to the regular kernel version.
+   LOCALVERSION can be set in the "General Setup" menu.
+
+ - In order to boot your new kernel, you'll need to copy the kernel
+   image (e.g. .../linux/arch/x86/boot/bzImage after compilation)
+   to the place where your regular bootable kernel is found.
+
+ - Booting a kernel directly from a floppy without the assistance of a
+   bootloader such as LILO, is no longer supported.
+
+   If you boot Linux from the hard drive, chances are you use LILO, which
+   uses the kernel image as specified in the file /etc/lilo.conf.  The
+   kernel image file is usually /vmlinuz, /boot/vmlinuz, /bzImage or
+   /boot/bzImage.  To use the new kernel, save a copy of the old image
+   and copy the new image over the old one.  Then, you MUST RERUN LILO
+   to update the loading map! If you don't, you won't be able to boot
+   the new kernel image.
+
+   Reinstalling LILO is usually a matter of running /sbin/lilo.
+   You may wish to edit /etc/lilo.conf to specify an entry for your
+   old kernel image (say, /vmlinux.old) in case the new one does not
+   work.  See the LILO docs for more information.
+
+   After reinstalling LILO, you should be all set.  Shutdown the system,
+   reboot, and enjoy!
+
+   If you ever need to change the default root device, video mode,
+   etc. in the kernel image, use your bootloader's boot options
+   where appropriate.  No need to recompile the kernel to change
+   these parameters.
+
+ - Reboot with the new kernel and enjoy.
+
+If something goes wrong
+-----------------------
+
+If you have problems that seem to be due to kernel bugs, please follow the
+instructions at 'Documentation/admin-guide/reporting-issues.rst'.
+
+Hints on understanding kernel bug reports are in
+'Documentation/admin-guide/bug-hunting.rst'. More on debugging the kernel
+with gdb is in 'Documentation/dev-tools/gdb-kernel-debugging.rst' and
+'Documentation/dev-tools/kgdb.rst'.