Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 250 insertions, 0 deletions

diff --git a/Documentation/admin-guide/svga.rst b/Documentation/admin-guide/svga.rst
new file mode 100644
index 000000000..9eb1e0738
--- /dev/null
+++ b/Documentation/admin-guide/svga.rst
@@ -0,0 +1,250 @@
+.. include:: <isonum.txt>
+
+=================================
+Video Mode Selection Support 2.13
+=================================
+
+:Copyright: |copy| 1995--1999 Martin Mares, <mj@ucw.cz>
+
+Intro
+~~~~~
+
+This small document describes the "Video Mode Selection" feature which
+allows the use of various special video modes supported by the video BIOS. Due
+to usage of the BIOS, the selection is limited to boot time (before the
+kernel decompression starts) and works only on 80X86 machines that are
+booted through BIOS firmware (as opposed to through UEFI, kexec, etc.).
+
+.. note::
+
+   Short intro for the impatient: Just use vga=ask for the first time,
+   enter ``scan`` on the video mode prompt, pick the mode you want to use,
+   remember its mode ID (the four-digit hexadecimal number) and then
+   set the vga parameter to this number (converted to decimal first).
+
+The video mode to be used is selected by a kernel parameter which can be
+specified in the kernel Makefile (the SVGA_MODE=... line) or by the "vga=..."
+option of LILO (or some other boot loader you use) or by the "xrandr" utility
+(present in standard Linux utility packages). You can use the following values
+of this parameter::
+
+   NORMAL_VGA - Standard 80x25 mode available on all display adapters.
+
+   EXTENDED_VGA	- Standard 8-pixel font mode: 80x43 on EGA, 80x50 on VGA.
+
+   ASK_VGA - Display a video mode menu upon startup (see below).
+
+   0..35 - Menu item number (when you have used the menu to view the list of
+      modes available on your adapter, you can specify the menu item you want
+      to use). 0..9 correspond to "0".."9", 10..35 to "a".."z". Warning: the
+      mode list displayed may vary as the kernel version changes, because the
+      modes are listed in a "first detected -- first displayed" manner. It's
+      better to use absolute mode numbers instead.
+
+   0x.... - Hexadecimal video mode ID (also displayed on the menu, see below
+      for exact meaning of the ID). Warning: LILO doesn't support
+      hexadecimal numbers -- you have to convert it to decimal manually.
+
+Menu
+~~~~
+
+The ASK_VGA mode causes the kernel to offer a video mode menu upon
+bootup. It displays a "Press <RETURN> to see video modes available, <SPACE>
+to continue or wait 30 secs" message. If you press <RETURN>, you enter the
+menu, if you press <SPACE> or wait 30 seconds, the kernel will boot up in
+the standard 80x25 mode.
+
+The menu looks like::
+
+	Video adapter: <name-of-detected-video-adapter>
+	Mode:    COLSxROWS:
+	0  0F00  80x25
+	1  0F01  80x50
+	2  0F02  80x43
+	3  0F03  80x26
+	....
+	Enter mode number or ``scan``: <flashing-cursor-here>
+
+<name-of-detected-video-adapter> tells what video adapter did Linux detect
+-- it's either a generic adapter name (MDA, CGA, HGC, EGA, VGA, VESA VGA [a VGA
+with VESA-compliant BIOS]) or a chipset name (e.g., Trident). Direct detection
+of chipsets is turned off by default as it's inherently unreliable due to
+absolutely insane PC design.
+
+"0  0F00  80x25" means that the first menu item (the menu items are numbered
+from "0" to "9" and from "a" to "z") is a 80x25 mode with ID=0x0f00 (see the
+next section for a description of mode IDs).
+
+<flashing-cursor-here> encourages you to enter the item number or mode ID
+you wish to set and press <RETURN>. If the computer complains something about
+"Unknown mode ID", it is trying to tell you that it isn't possible to set such
+a mode. It's also possible to press only <RETURN> which leaves the current mode.
+
+The mode list usually contains a few basic modes and some VESA modes.  In
+case your chipset has been detected, some chipset-specific modes are shown as
+well (some of these might be missing or unusable on your machine as different
+BIOSes are often shipped with the same card and the mode numbers depend purely
+on the VGA BIOS).
+
+The modes displayed on the menu are partially sorted: The list starts with
+the standard modes (80x25 and 80x50) followed by "special" modes (80x28 and
+80x43), local modes (if the local modes feature is enabled), VESA modes and
+finally SVGA modes for the auto-detected adapter.
+
+If you are not happy with the mode list offered (e.g., if you think your card
+is able to do more), you can enter "scan" instead of item number / mode ID.  The
+program will try to ask the BIOS for all possible video mode numbers and test
+what happens then. The screen will be probably flashing wildly for some time and
+strange noises will be heard from inside the monitor and so on and then, really
+all consistent video modes supported by your BIOS will appear (plus maybe some
+``ghost modes``). If you are afraid this could damage your monitor, don't use
+this function.
+
+After scanning, the mode ordering is a bit different: the auto-detected SVGA
+modes are not listed at all and the modes revealed by ``scan`` are shown before
+all VESA modes.
+
+Mode IDs
+~~~~~~~~
+
+Because of the complexity of all the video stuff, the video mode IDs
+used here are also a bit complex. A video mode ID is a 16-bit number usually
+expressed in a hexadecimal notation (starting with "0x"). You can set a mode
+by entering its mode directly if you know it even if it isn't shown on the menu.
+
+The ID numbers can be divided to those regions::
+
+   0x0000 to 0x00ff - menu item references. 0x0000 is the first item. Don't use
+	outside the menu as this can change from boot to boot (especially if you
+	have used the ``scan`` feature).
+
+   0x0100 to 0x017f - standard BIOS modes. The ID is a BIOS video mode number
+	(as presented to INT 10, function 00) increased by 0x0100.
+
+   0x0200 to 0x08ff - VESA BIOS modes. The ID is a VESA mode ID increased by
+	0x0100. All VESA modes should be autodetected and shown on the menu.
+
+   0x0900 to 0x09ff - Video7 special modes. Set by calling INT 0x10, AX=0x6f05.
+	(Usually 940=80x43, 941=132x25, 942=132x44, 943=80x60, 944=100x60,
+	945=132x28 for the standard Video7 BIOS)
+
+   0x0f00 to 0x0fff - special modes (they are set by various tricks -- usually
+	by modifying one of the standard modes). Currently available:
+	0x0f00	standard 80x25, don't reset mode if already set (=FFFF)
+	0x0f01	standard with 8-point font: 80x43 on EGA, 80x50 on VGA
+	0x0f02	VGA 80x43 (VGA switched to 350 scanlines with a 8-point font)
+	0x0f03	VGA 80x28 (standard VGA scans, but 14-point font)
+	0x0f04	leave current video mode
+	0x0f05	VGA 80x30 (480 scans, 16-point font)
+	0x0f06	VGA 80x34 (480 scans, 14-point font)
+	0x0f07	VGA 80x60 (480 scans, 8-point font)
+	0x0f08	Graphics hack (see the VIDEO_GFX_HACK paragraph below)
+
+   0x1000 to 0x7fff - modes specified by resolution. The code has a "0xRRCC"
+	form where RR is a number of rows and CC is a number of columns.
+	E.g., 0x1950 corresponds to a 80x25 mode, 0x2b84 to 132x43 etc.
+	This is the only fully portable way to refer to a non-standard mode,
+	but it relies on the mode being found and displayed on the menu
+	(remember that mode scanning is not done automatically).
+
+   0xff00 to 0xffff - aliases for backward compatibility:
+	0xffff	equivalent to 0x0f00 (standard 80x25)
+	0xfffe	equivalent to 0x0f01 (EGA 80x43 or VGA 80x50)
+
+If you add 0x8000 to the mode ID, the program will try to recalculate
+vertical display timing according to mode parameters, which can be used to
+eliminate some annoying bugs of certain VGA BIOSes (usually those used for
+cards with S3 chipsets and old Cirrus Logic BIOSes) -- mainly extra lines at the
+end of the display.
+
+Options
+~~~~~~~
+
+Build options for arch/x86/boot/* are selected by the kernel kconfig
+utility and the kernel .config file.
+
+VIDEO_GFX_HACK - includes special hack for setting of graphics modes
+to be used later by special drivers.
+Allows to set _any_ BIOS mode including graphic ones and forcing specific
+text screen resolution instead of peeking it from BIOS variables. Don't use
+unless you think you know what you're doing. To activate this setup, use
+mode number 0x0f08 (see the Mode IDs section above).
+
+Still doesn't work?
+~~~~~~~~~~~~~~~~~~~
+
+When the mode detection doesn't work (e.g., the mode list is incorrect or
+the machine hangs instead of displaying the menu), try to switch off some of
+the configuration options listed under "Options". If it fails, you can still use
+your kernel with the video mode set directly via the kernel parameter.
+
+In either case, please send me a bug report containing what _exactly_
+happens and how do the configuration switches affect the behaviour of the bug.
+
+If you start Linux from M$-DOS, you might also use some DOS tools for
+video mode setting. In this case, you must specify the 0x0f04 mode ("leave
+current settings") to Linux, because if you don't and you use any non-standard
+mode, Linux will switch to 80x25 automatically.
+
+If you set some extended mode and there's one or more extra lines on the
+bottom of the display containing already scrolled-out text, your VGA BIOS
+contains the most common video BIOS bug called "incorrect vertical display
+end setting". Adding 0x8000 to the mode ID might fix the problem. Unfortunately,
+this must be done manually -- no autodetection mechanisms are available.
+
+History
+~~~~~~~
+
+=============== ================================================================
+1.0 (??-Nov-95)	First version supporting all adapters supported by the old
+		setup.S + Cirrus Logic 54XX. Present in some 1.3.4? kernels
+		and then removed due to instability on some machines.
+2.0 (28-Jan-96)	Rewritten from scratch. Cirrus Logic 64XX support added, almost
+		everything is configurable, the VESA support should be much more
+		stable, explicit mode numbering allowed, "scan" implemented etc.
+2.1 (30-Jan-96) VESA modes moved to 0x200-0x3ff. Mode selection by resolution
+		supported. Few bugs fixed. VESA modes are listed prior to
+		modes supplied by SVGA autodetection as they are more reliable.
+		CLGD autodetect works better. Doesn't depend on 80x25 being
+		active when started. Scanning fixed. 80x43 (any VGA) added.
+		Code cleaned up.
+2.2 (01-Feb-96)	EGA 80x43 fixed. VESA extended to 0x200-0x4ff (non-standard 02XX
+		VESA modes work now). Display end bug workaround supported.
+		Special modes renumbered to allow adding of the "recalculate"
+		flag, 0xffff and 0xfffe became aliases instead of real IDs.
+		Screen contents retained during mode changes.
+2.3 (15-Mar-96)	Changed to work with 1.3.74 kernel.
+2.4 (18-Mar-96)	Added patches by Hans Lermen fixing a memory overwrite problem
+		with some boot loaders. Memory management rewritten to reflect
+		these changes. Unfortunately, screen contents retaining works
+		only with some loaders now.
+		Added a Tseng 132x60 mode.
+2.5 (19-Mar-96)	Fixed a VESA mode scanning bug introduced in 2.4.
+2.6 (25-Mar-96)	Some VESA BIOS errors not reported -- it fixes error reports on
+		several cards with broken VESA code (e.g., ATI VGA).
+2.7 (09-Apr-96)	- Accepted all VESA modes in range 0x100 to 0x7ff, because some
+		  cards use very strange mode numbers.
+		- Added Realtek VGA modes (thanks to Gonzalo Tornaria).
+		- Hardware testing order slightly changed, tests based on ROM
+		  contents done as first.
+		- Added support for special Video7 mode switching functions
+		  (thanks to Tom Vander Aa).
+		- Added 480-scanline modes (especially useful for notebooks,
+		  original version written by hhanemaa@cs.ruu.nl, patched by
+		  Jeff Chua, rewritten by me).
+		- Screen store/restore fixed.
+2.8 (14-Apr-96) - Previous release was not compilable without CONFIG_VIDEO_SVGA.
+		- Better recognition of text modes during mode scan.
+2.9 (12-May-96)	- Ignored VESA modes 0x80 - 0xff (more VESA BIOS bugs!)
+2.10(11-Nov-96) - The whole thing made optional.
+		- Added the CONFIG_VIDEO_400_HACK switch.
+		- Added the CONFIG_VIDEO_GFX_HACK switch.
+		- Code cleanup.
+2.11(03-May-97) - Yet another cleanup, now including also the documentation.
+		- Direct testing of SVGA adapters turned off by default, ``scan``
+		  offered explicitly on the prompt line.
+		- Removed the doc section describing adding of new probing
+		  functions as I try to get rid of _all_ hardware probing here.
+2.12(25-May-98) Added support for VESA frame buffer graphics.
+2.13(14-May-99) Minor documentation fixes.
+=============== ================================================================