Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 195 insertions, 0 deletions

diff --git a/Documentation/mm/page_migration.rst b/Documentation/mm/page_migration.rst
new file mode 100644
index 000000000..11493bad7
--- /dev/null
+++ b/Documentation/mm/page_migration.rst
@@ -0,0 +1,195 @@
+.. _page_migration:
+
+==============
+Page migration
+==============
+
+Page migration allows moving the physical location of pages between
+nodes in a NUMA system while the process is running. This means that the
+virtual addresses that the process sees do not change. However, the
+system rearranges the physical location of those pages.
+
+Also see :ref:`Heterogeneous Memory Management (HMM) <hmm>`
+for migrating pages to or from device private memory.
+
+The main intent of page migration is to reduce the latency of memory accesses
+by moving pages near to the processor where the process accessing that memory
+is running.
+
+Page migration allows a process to manually relocate the node on which its
+pages are located through the MF_MOVE and MF_MOVE_ALL options while setting
+a new memory policy via mbind(). The pages of a process can also be relocated
+from another process using the sys_migrate_pages() function call. The
+migrate_pages() function call takes two sets of nodes and moves pages of a
+process that are located on the from nodes to the destination nodes.
+Page migration functions are provided by the numactl package by Andi Kleen
+(a version later than 0.9.3 is required. Get it from
+https://github.com/numactl/numactl.git). numactl provides libnuma
+which provides an interface similar to other NUMA functionality for page
+migration.  cat ``/proc/<pid>/numa_maps`` allows an easy review of where the
+pages of a process are located. See also the numa_maps documentation in the
+proc(5) man page.
+
+Manual migration is useful if for example the scheduler has relocated
+a process to a processor on a distant node. A batch scheduler or an
+administrator may detect the situation and move the pages of the process
+nearer to the new processor. The kernel itself only provides
+manual page migration support. Automatic page migration may be implemented
+through user space processes that move pages. A special function call
+"move_pages" allows the moving of individual pages within a process.
+For example, A NUMA profiler may obtain a log showing frequent off-node
+accesses and may use the result to move pages to more advantageous
+locations.
+
+Larger installations usually partition the system using cpusets into
+sections of nodes. Paul Jackson has equipped cpusets with the ability to
+move pages when a task is moved to another cpuset (See
+:ref:`CPUSETS <cpusets>`).
+Cpusets allow the automation of process locality. If a task is moved to
+a new cpuset then also all its pages are moved with it so that the
+performance of the process does not sink dramatically. Also the pages
+of processes in a cpuset are moved if the allowed memory nodes of a
+cpuset are changed.
+
+Page migration allows the preservation of the relative location of pages
+within a group of nodes for all migration techniques which will preserve a
+particular memory allocation pattern generated even after migrating a
+process. This is necessary in order to preserve the memory latencies.
+Processes will run with similar performance after migration.
+
+Page migration occurs in several steps. First a high level
+description for those trying to use migrate_pages() from the kernel
+(for userspace usage see the Andi Kleen's numactl package mentioned above)
+and then a low level description of how the low level details work.
+
+In kernel use of migrate_pages()
+================================
+
+1. Remove pages from the LRU.
+
+   Lists of pages to be migrated are generated by scanning over
+   pages and moving them into lists. This is done by
+   calling isolate_lru_page().
+   Calling isolate_lru_page() increases the references to the page
+   so that it cannot vanish while the page migration occurs.
+   It also prevents the swapper or other scans from encountering
+   the page.
+
+2. We need to have a function of type new_page_t that can be
+   passed to migrate_pages(). This function should figure out
+   how to allocate the correct new page given the old page.
+
+3. The migrate_pages() function is called which attempts
+   to do the migration. It will call the function to allocate
+   the new page for each page that is considered for
+   moving.
+
+How migrate_pages() works
+=========================
+
+migrate_pages() does several passes over its list of pages. A page is moved
+if all references to a page are removable at the time. The page has
+already been removed from the LRU via isolate_lru_page() and the refcount
+is increased so that the page cannot be freed while page migration occurs.
+
+Steps:
+
+1. Lock the page to be migrated.
+
+2. Ensure that writeback is complete.
+
+3. Lock the new page that we want to move to. It is locked so that accesses to
+   this (not yet up-to-date) page immediately block while the move is in progress.
+
+4. All the page table references to the page are converted to migration
+   entries. This decreases the mapcount of a page. If the resulting
+   mapcount is not zero then we do not migrate the page. All user space
+   processes that attempt to access the page will now wait on the page lock
+   or wait for the migration page table entry to be removed.
+
+5. The i_pages lock is taken. This will cause all processes trying
+   to access the page via the mapping to block on the spinlock.
+
+6. The refcount of the page is examined and we back out if references remain.
+   Otherwise, we know that we are the only one referencing this page.
+
+7. The radix tree is checked and if it does not contain the pointer to this
+   page then we back out because someone else modified the radix tree.
+
+8. The new page is prepped with some settings from the old page so that
+   accesses to the new page will discover a page with the correct settings.
+
+9. The radix tree is changed to point to the new page.
+
+10. The reference count of the old page is dropped because the address space
+    reference is gone. A reference to the new page is established because
+    the new page is referenced by the address space.
+
+11. The i_pages lock is dropped. With that lookups in the mapping
+    become possible again. Processes will move from spinning on the lock
+    to sleeping on the locked new page.
+
+12. The page contents are copied to the new page.
+
+13. The remaining page flags are copied to the new page.
+
+14. The old page flags are cleared to indicate that the page does
+    not provide any information anymore.
+
+15. Queued up writeback on the new page is triggered.
+
+16. If migration entries were inserted into the page table, then replace them
+    with real ptes. Doing so will enable access for user space processes not
+    already waiting for the page lock.
+
+17. The page locks are dropped from the old and new page.
+    Processes waiting on the page lock will redo their page faults
+    and will reach the new page.
+
+18. The new page is moved to the LRU and can be scanned by the swapper,
+    etc. again.
+
+Non-LRU page migration
+======================
+
+Although migration originally aimed for reducing the latency of memory
+accesses for NUMA, compaction also uses migration to create high-order
+pages.  For compaction purposes, it is also useful to be able to move
+non-LRU pages, such as zsmalloc and virtio-balloon pages.
+
+If a driver wants to make its pages movable, it should define a struct
+movable_operations.  It then needs to call __SetPageMovable() on each
+page that it may be able to move.  This uses the ``page->mapping`` field,
+so this field is not available for the driver to use for other purposes.
+
+Monitoring Migration
+=====================
+
+The following events (counters) can be used to monitor page migration.
+
+1. PGMIGRATE_SUCCESS: Normal page migration success. Each count means that a
+   page was migrated. If the page was a non-THP and non-hugetlb page, then
+   this counter is increased by one. If the page was a THP or hugetlb, then
+   this counter is increased by the number of THP or hugetlb subpages.
+   For example, migration of a single 2MB THP that has 4KB-size base pages
+   (subpages) will cause this counter to increase by 512.
+
+2. PGMIGRATE_FAIL: Normal page migration failure. Same counting rules as for
+   PGMIGRATE_SUCCESS, above: this will be increased by the number of subpages,
+   if it was a THP or hugetlb.
+
+3. THP_MIGRATION_SUCCESS: A THP was migrated without being split.
+
+4. THP_MIGRATION_FAIL: A THP could not be migrated nor it could be split.
+
+5. THP_MIGRATION_SPLIT: A THP was migrated, but not as such: first, the THP had
+   to be split. After splitting, a migration retry was used for it's sub-pages.
+
+THP_MIGRATION_* events also update the appropriate PGMIGRATE_SUCCESS or
+PGMIGRATE_FAIL events. For example, a THP migration failure will cause both
+THP_MIGRATION_FAIL and PGMIGRATE_FAIL to increase.
+
+Christoph Lameter, May 8, 2006.
+Minchan Kim, Mar 28, 2016.
+
+.. kernel-doc:: include/linux/migrate.h