Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 166 insertions, 0 deletions

diff --git a/Documentation/sphinx/kernel_feat.py b/Documentation/sphinx/kernel_feat.py
new file mode 100644
index 000000000..27b701ed3
--- /dev/null
+++ b/Documentation/sphinx/kernel_feat.py
@@ -0,0 +1,166 @@
+# coding=utf-8
+# SPDX-License-Identifier: GPL-2.0
+#
+u"""
+    kernel-feat
+    ~~~~~~~~~~~
+
+    Implementation of the ``kernel-feat`` reST-directive.
+
+    :copyright:  Copyright (C) 2016  Markus Heiser
+    :copyright:  Copyright (C) 2016-2019  Mauro Carvalho Chehab
+    :maintained-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
+    :license:    GPL Version 2, June 1991 see Linux/COPYING for details.
+
+    The ``kernel-feat`` (:py:class:`KernelFeat`) directive calls the
+    scripts/get_feat.pl script to parse the Kernel ABI files.
+
+    Overview of directive's argument and options.
+
+    .. code-block:: rst
+
+        .. kernel-feat:: <ABI directory location>
+            :debug:
+
+    The argument ``<ABI directory location>`` is required. It contains the
+    location of the ABI files to be parsed.
+
+    ``debug``
+      Inserts a code-block with the *raw* reST. Sometimes it is helpful to see
+      what reST is generated.
+
+"""
+
+import codecs
+import os
+import re
+import subprocess
+import sys
+
+from os import path
+
+from docutils import nodes, statemachine
+from docutils.statemachine import ViewList
+from docutils.parsers.rst import directives, Directive
+from docutils.utils.error_reporting import ErrorString
+from sphinx.util.docutils import switch_source_input
+
+__version__  = '1.0'
+
+def setup(app):
+
+    app.add_directive("kernel-feat", KernelFeat)
+    return dict(
+        version = __version__
+        , parallel_read_safe = True
+        , parallel_write_safe = True
+    )
+
+class KernelFeat(Directive):
+
+    u"""KernelFeat (``kernel-feat``) directive"""
+
+    required_arguments = 1
+    optional_arguments = 2
+    has_content = False
+    final_argument_whitespace = True
+
+    option_spec = {
+        "debug"     : directives.flag
+    }
+
+    def warn(self, message, **replace):
+        replace["fname"]   = self.state.document.current_source
+        replace["line_no"] = replace.get("line_no", self.lineno)
+        message = ("%(fname)s:%(line_no)s: [kernel-feat WARN] : " + message) % replace
+        self.state.document.settings.env.app.warn(message, prefix="")
+
+    def run(self):
+
+        doc = self.state.document
+        if not doc.settings.file_insertion_enabled:
+            raise self.warning("docutils: file insertion disabled")
+
+        env = doc.settings.env
+        cwd = path.dirname(doc.current_source)
+        cmd = "get_feat.pl rest --enable-fname --dir "
+        cmd += self.arguments[0]
+
+        if len(self.arguments) > 1:
+            cmd += " --arch " + self.arguments[1]
+
+        srctree = path.abspath(os.environ["srctree"])
+
+        fname = cmd
+
+        # extend PATH with $(srctree)/scripts
+        path_env = os.pathsep.join([
+            srctree + os.sep + "scripts",
+            os.environ["PATH"]
+        ])
+        shell_env = os.environ.copy()
+        shell_env["PATH"]    = path_env
+        shell_env["srctree"] = srctree
+
+        lines = self.runCmd(cmd, shell=True, cwd=cwd, env=shell_env)
+
+        line_regex = re.compile("^\.\. FILE (\S+)$")
+
+        out_lines = ""
+
+        for line in lines.split("\n"):
+            match = line_regex.search(line)
+            if match:
+                fname = match.group(1)
+
+                # Add the file to Sphinx build dependencies
+                env.note_dependency(os.path.abspath(fname))
+            else:
+                out_lines += line + "\n"
+
+        nodeList = self.nestedParse(out_lines, fname)
+        return nodeList
+
+    def runCmd(self, cmd, **kwargs):
+        u"""Run command ``cmd`` and return its stdout as unicode."""
+
+        try:
+            proc = subprocess.Popen(
+                cmd
+                , stdout = subprocess.PIPE
+                , stderr = subprocess.PIPE
+                , **kwargs
+            )
+            out, err = proc.communicate()
+
+            out, err = codecs.decode(out, 'utf-8'), codecs.decode(err, 'utf-8')
+
+            if proc.returncode != 0:
+                raise self.severe(
+                    u"command '%s' failed with return code %d"
+                    % (cmd, proc.returncode)
+                )
+        except OSError as exc:
+            raise self.severe(u"problems with '%s' directive: %s."
+                              % (self.name, ErrorString(exc)))
+        return out
+
+    def nestedParse(self, lines, fname):
+        content = ViewList()
+        node    = nodes.section()
+
+        if "debug" in self.options:
+            code_block = "\n\n.. code-block:: rst\n    :linenos:\n"
+            for l in lines.split("\n"):
+                code_block += "\n    " + l
+            lines = code_block + "\n\n"
+
+        for c, l in enumerate(lines.split("\n")):
+            content.append(l, fname, c)
+
+        buf  = self.state.memo.title_styles, self.state.memo.section_level, self.state.memo.reporter
+
+        with switch_source_input(self.state, content):
+            self.state.nested_parse(content, 0, node, match_titles=1)
+
+        return node.children