Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 940 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
new file mode 100644
index 000000000..f75cad41a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
@@ -0,0 +1,940 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2020 Bytedance.
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Bytedance G220A BMC";
+	compatible = "bytedance,g220a-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+		i2c14 = &channel_3_0;
+		i2c15 = &channel_3_1;
+		i2c16 = &channel_3_2;
+		i2c17 = &channel_3_3;
+		i2c18 = &channel_6_0;
+		i2c19 = &channel_6_1;
+		i2c20 = &channel_6_2;
+		i2c21 = &channel_6_3;
+		i2c22 = &channel_6_4;
+		i2c23 = &channel_6_5;
+		i2c24 = &channel_6_6;
+		i2c25 = &channel_6_7;
+		i2c26 = &channel_6_8;
+		i2c27 = &channel_6_9;
+		i2c28 = &channel_6_10;
+		i2c29 = &channel_6_11;
+		i2c30 = &channel_6_12;
+		i2c31 = &channel_6_13;
+		i2c32 = &channel_6_14;
+		i2c33 = &channel_6_15;
+		i2c34 = &channel_6_16;
+		i2c35 = &channel_6_17;
+		i2c36 = &channel_6_18;
+		i2c37 = &channel_6_19;
+		i2c38 = &channel_6_20;
+		i2c39 = &channel_6_21;
+		i2c40 = &channel_6_22;
+		i2c41 = &channel_6_23;
+		i2c42 = &channel_6_24;
+		i2c43 = &channel_6_25;
+		i2c44 = &channel_10_0;
+		i2c45 = &channel_10_1;
+		i2c46 = &channel_10_2;
+		i2c47 = &channel_10_3;
+		i2c48 = &channel_10_4;
+		i2c49 = &channel_10_5;
+		i2c50 = &channel_10_6;
+		i2c51 = &channel_10_7;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@bc000000 {
+			no-map;
+			reg = <0xbc000000 0x04000000>; /* 64M */
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		bmc_alive {
+			label = "bmc_alive";
+			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+			led-pattern = <1000 1000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		event-burn-in-signal {
+			label = "burn-in";
+			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(R, 5)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-rear-riser1-presence {
+			label = "rear-riser1-presence";
+			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <1>;
+		};
+
+		event-alrt-pvddq-cpu0 {
+			label = "alrt-pvddq-cpu0";
+			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+		};
+
+		event-rear-riser0-presence {
+			label = "rear-riser0-presence";
+			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+			linux,code = <3>;
+		};
+
+		event-fault-pvddq-cpu0 {
+			label = "fault-pvddq-cpu0";
+			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+		};
+
+		event-alrt-pvddq-cpu1 {
+			label = "alrt-pvddq-cpu1";
+			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		event-fault-pvddq-cpu1 {
+			label = "alrt-pvddq-cpu1";
+			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fault-pvccin-cpu1 {
+			label = "fault-pvccin-cpuq";
+			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		event-bmc-rom0-wp {
+			label = "bmc-rom0-wp";
+			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+		};
+
+		event-bmc-rom1-wp {
+			label = "bmc-rom1-wp";
+			gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+		};
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
+			linux,code = <11>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
+			linux,code = <12>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
+			linux,code = <13>;
+		};
+
+		event-fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
+			linux,code = <14>;
+		};
+
+		event-fan5-presence {
+			label = "fan5-presence";
+			gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
+			linux,code = <15>;
+		};
+
+		event-front-bp1-presence {
+			label = "front-bp1-presence";
+			gpios = <&pca1 8 GPIO_ACTIVE_LOW>;
+			linux,code = <16>;
+		};
+
+		event-rear-bp-presence {
+			label = "rear-bp-presence";
+			gpios = <&pca1 9 GPIO_ACTIVE_LOW>;
+			linux,code = <17>;
+		};
+
+		event-fault-pvccin-cpu0 {
+			label = "fault-pvccin-cpu0";
+			gpios = <&pca1 10 GPIO_ACTIVE_LOW>;
+			linux,code = <18>;
+		};
+
+		event-alrt-p1v05-pvcc {
+			label = "alrt-p1v05-pvcc1";
+			gpios = <&pca1 11 GPIO_ACTIVE_LOW>;
+			linux,code = <19>;
+		};
+
+		event-fault-p1v05-pvccio {
+			label = "alrt-p1v05-pvcc1";
+			gpios = <&pca1 12 GPIO_ACTIVE_LOW>;
+			linux,code = <20>;
+		};
+
+		event-alrt-p1v8-pvccio {
+			label = "alrt-p1v8-pvccio";
+			gpios = <&pca1 13 GPIO_ACTIVE_LOW>;
+			linux,code = <21>;
+		};
+
+		event-fault-p1v8-pvccio {
+			label = "fault-p1v8-pvccio";
+			gpios = <&pca1 14 GPIO_ACTIVE_LOW>;
+			linux,code = <22>;
+		};
+
+		event-front-bp0-presence {
+			label = "front-bp0-presence";
+			gpios = <&pca1 15 GPIO_ACTIVE_LOW>;
+			linux,code = <23>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		label = "alt-bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&adc {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+	aspeed,alt-boot;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"SMRST_OCP_N","MAC2_LINK","BMC_CPLD_SMB_RST_R_N","BMC_CPLD_GPIO0",
+			"","","","",
+	/*B0-B7*/	"BMC_INIT_R_OK","FM_BOARD_REV_ID2","FM_PROJECT_ID7","FAULT_P12V_STBY_N",
+			"","CPU0_PROCHOT_LVT3_N","","BIOS_LOAD_DEFAULT_R_N",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"FM_PROJECT_ID0","FM_PROJECT_ID1","FM_PROJECT_ID2","FM_PROJECT_ID3",
+			"FM_PROJECT_ID4","FM_PROJECT_ID5","","",
+	/*F0-F7*/	"PSU0_PRSNT_N","PSU1_PRSNT_N","","FAULT_P12V_NVME_N",
+			"BIOS_DEBUG_MODE_R_N","DISABLE_CPU_DDR_R_SPD","COOLING_STRATEGY",
+			"PCH_GLB_RST_N",
+	/*G0-G7*/	"P12V_PMBUS_ALERT_N","CPLD_ALERT_N","BMC_RELOAD_N",
+			"P12V_PVDDQ_PMBUS_ALERT_N","BMC_JTAG_TCK_MUX_R_SEL","","NMI_OUT",
+			"NMI_BUTTON",
+	/*H0-H7*/	"BMC_CPLD_JTAG_TDI","BMC_CPLD_JTAG_TDO","BMC_CPLD_JTAG_TCK",
+			"BMC_CPLD_JTAG_TMS","FM_PROJECT_ID6","FM_BOARD_REV_ID0",
+			"PCA9546_U70_RST_N","IRQ_SML0_ALERT_N",
+	/*I0-I7*/	"FAULT_FRONT_RISER_P12V_N","FAULT_OCP_P12V_N","FM_BMC_PCH_SCI_R_N",
+			"","","","","",
+	/*J0-J7*/	"FM_CPU0_SKTOCC_N","FM_CPU1_SKTOCC_N","FM_CPU1_DISABLE_COD_N",
+			"","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"P12V_FAULT_N","PWRGD_P12V_PCIE_RISER","","LEAKAGE_DETECT_INPUT_N",
+			"","IRQ_SML1_PMBUS_ALERT_N","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","FM_PCH_THERMTRIP_N","CHASSIS_INTRUSION",
+	/*R0-R7*/	"","PVCCIN_CPU1_SMBALERT_N","BMC_PREQ_R_N","FAULT_P12V_PCIE_RISER_N",
+			"ALT_P12V_PCIE_RISER_N","BURN_BOARD_N","PVCCIN_CPU0_SMBALERT_N","",
+	/*S0-S7*/	"BMC_PRDY_N","SIO_POWER_GOOD","FM_BMC_PWR_DEBUG_R_N",
+			"FM_BMC_XDP_DEBUG_EN","","STRAP_BMC_BATTERY_GPIOS5","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","PWRGD_PSU0_PWROK","CPU1_PROCHOT_LVT3_N","IRQ_BMC_PCH_SMI_LPC_N",
+			"","","","",
+	/*Z0-Z7*/	"XDP_PRSNT_N","BMC_XDP_SYS_PWROK","BMC_XDP_JTAG_SEL",
+			"PCH_BMC_SMI_ACTIVE_R_N","","","","",
+	/*AA0-AA7*/	"PWRGD_P12V_STBY_OCP","PS_PWROK","RST_PLTRST_BMC_R_N","HDA_SDO_R",
+			"FM_SLPS4_R_N","PWRGD_PSU1_PWROK","POWER_BUTTON","POWER_OUT",
+	/*AB0-AB7*/	"","RESET_OUT","SPI_BIOS_MODE_SELECT","POST_COMPLETE","","","","",
+	/*AC0-AC7*/	"","","","","","","","CPLD_PLTRST_B_N";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xCA2>;
+	status = "okay";
+};
+
+&kcs4 {
+	aspeed,lpc-io-reg = <0xCA4>;
+	status = "okay";
+};
+
+&lpc_snoop {
+	snoop-ports = <0x80>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default
+			&pinctrl_nrts2_default
+			&pinctrl_ndtr2_default
+			&pinctrl_ndsr2_default
+			&pinctrl_ncts2_default
+			&pinctrl_ndcd2_default
+			&pinctrl_nri2_default>;
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_3_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_3_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_3_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_3_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	ipmb0@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+	i2c-switch@72 {
+		compatible = "nxp,pca9548";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel_6_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_6_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_6_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_6_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+		channel_6_4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		channel_6_5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		channel_6_6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		channel_6_7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel_6_8: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			i2c-switch@71 {
+				compatible = "nxp,pca9546";
+				reg = <0x71>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel_6_12: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+				};
+
+				channel_6_13: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				channel_6_14: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				channel_6_15: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		 };
+
+		channel_6_9: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			i2c-switch@71 {
+				compatible = "nxp,pca9546";
+				reg = <0x71>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel_6_16: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+				};
+
+				channel_6_17: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				channel_6_18: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				channel_6_19: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		 };
+
+		channel_6_10: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			i2c-switch@71 {
+				compatible = "nxp,pca9546";
+				reg = <0x71>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel_6_20: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				channel_6_21: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				channel_6_22: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				channel_6_23: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		 };
+
+		channel_6_11: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			i2c-switch@71 {
+				compatible = "nxp,pca9546";
+				reg = <0x71>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel_6_24: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				channel_6_25: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			 };
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+	pca0:pca9555@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca1:pca9555@25 {
+		compatible = "nxp,pca9555";
+		reg = <0x25>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel_10_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_10_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_10_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_10_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel_10_4: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_10_5: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_10_6: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_10_7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+	};
+};
+
+&gpio {
+	pin_gpio_i3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "NCSI_BMC_R_SEL";
+	};
+
+	pin_gpio_b6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "EN_NCSI_SWITCH_N";
+	};
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+	status = "okay";
+};