Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 986 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
new file mode 100644
index 000000000..abf3006f0
--- /dev/null
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -0,0 +1,986 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/rv1108-cru.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/thermal/thermal.h>
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	compatible = "rockchip,rv1108";
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <75>;
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+	};
+
+	cpu_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <975000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <975000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1025000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1150000>;
+			clock-latency-ns = <40000>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+		arm,cpu-registers-not-fw-configured;
+		clock-frequency = <24000000>;
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	bus_intmem: sram@10080000 {
+		compatible = "mmio-sram";
+		reg = <0x10080000 0x2000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x10080000 0x2000>;
+	};
+
+	uart2: serial@10210000 {
+		compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
+		reg = <0x10210000 0x100>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&pdma 6>, <&pdma 7>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2m0_xfer>;
+		status = "disabled";
+	};
+
+	uart1: serial@10220000 {
+		compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
+		reg = <0x10220000 0x100>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&pdma 4>, <&pdma 5>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		status = "disabled";
+	};
+
+	uart0: serial@10230000 {
+		compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
+		reg = <0x10230000 0x100>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&pdma 2>, <&pdma 3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@10240000 {
+		compatible = "rockchip,rv1108-i2c";
+		reg = <0x10240000 0x1000>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@10250000 {
+		compatible = "rockchip,rv1108-i2c";
+		reg = <0x10250000 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2m1_xfer>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@10260000 {
+		compatible = "rockchip,rv1108-i2c";
+		reg = <0x10260000 0x1000>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	spi: spi@10270000 {
+		compatible = "rockchip,rv1108-spi";
+		reg = <0x10270000 0x1000>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&pdma 8>, <&pdma 9>;
+		dma-names = "tx", "rx";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	pwm4: pwm@10280000 {
+		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
+		reg = <0x10280000 0x10>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm4_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm5: pwm@10280010 {
+		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
+		reg = <0x10280010 0x10>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm5_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm6: pwm@10280020 {
+		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
+		reg = <0x10280020 0x10>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm6_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm7: pwm@10280030 {
+		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
+		reg = <0x10280030 0x10>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm7_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pdma: dma-controller@102a0000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x102a0000 0x4000>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		#dma-cells = <1>;
+		arm,pl330-broken-no-flushp;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC>;
+		clock-names = "apb_pclk";
+	};
+
+	grf: syscon@10300000 {
+		compatible = "rockchip,rv1108-grf", "syscon", "simple-mfd";
+		reg = <0x10300000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		io_domains: io-domains {
+			compatible = "rockchip,rv1108-io-voltage-domain";
+			status = "disabled";
+		};
+
+		u2phy: usb2phy@100 {
+			compatible = "rockchip,rv1108-usb2phy";
+			reg = <0x100 0x0c>;
+			clocks = <&cru SCLK_USBPHY>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			clock-output-names = "usbphy";
+			rockchip,usbgrf = <&usbgrf>;
+			status = "disabled";
+
+			u2phy_otg: otg-port {
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "otg-mux";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			u2phy_host: host-port {
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer: timer@10350000 {
+		compatible = "rockchip,rv1108-timer", "rockchip,rk3288-timer";
+		reg = <0x10350000 0x20>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&xin24m>;
+		clock-names = "pclk", "timer";
+	};
+
+	watchdog: watchdog@10360000 {
+		compatible = "rockchip,rv1108-wdt", "snps,dw-wdt";
+		reg = <0x10360000 0x100>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_WDT>;
+		status = "disabled";
+	};
+
+	thermal-zones {
+		soc_thermal: soc-thermal {
+			polling-delay-passive = <20>;
+			polling-delay = <1000>;
+			sustainable-power = <50>;
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				threshold: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				target: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				soc_crit: soc-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <4096>;
+				};
+			};
+		};
+	};
+
+	tsadc: tsadc@10370000 {
+		compatible = "rockchip,rv1108-tsadc";
+		reg = <0x10370000 0x100>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru SCLK_TSADC>;
+		assigned-clock-rates = <750000>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_pin>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_pin>;
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		rockchip,hw-tshut-temp = <120000>;
+		#thermal-sensor-cells = <1>;
+		status = "disabled";
+	};
+
+	adc: adc@1038c000 {
+		compatible = "rockchip,rv1108-saradc", "rockchip,rk3399-saradc";
+		reg = <0x1038c000 0x100>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		status = "disabled";
+	};
+
+	i2c0: i2c@20000000 {
+		compatible = "rockchip,rv1108-i2c";
+		reg = <0x20000000 0x1000>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_I2C0_PMU>, <&cru PCLK_I2C0_PMU>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@20040000 {
+		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20040000 0x10>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@20040010 {
+		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20040010 0x10>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@20040020 {
+		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20040020 0x10>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@20040030 {
+		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20040030 0x10>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pmugrf: syscon@20060000 {
+		compatible = "rockchip,rv1108-pmugrf", "syscon", "simple-mfd";
+		reg = <0x20060000 0x1000>;
+
+		pmu_io_domains: io-domains {
+			compatible = "rockchip,rv1108-pmu-io-voltage-domain";
+			status = "disabled";
+		};
+	};
+
+	usbgrf: syscon@202a0000 {
+		compatible = "rockchip,rv1108-usbgrf", "syscon";
+		reg = <0x202a0000 0x1000>;
+	};
+
+	cru: clock-controller@20200000 {
+		compatible = "rockchip,rv1108-cru";
+		reg = <0x20200000 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	nfc: nand-controller@30100000 {
+		compatible = "rockchip,rv1108-nfc";
+		reg = <0x30100000  0x1000>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
+		clock-names = "ahb", "nfc";
+		assigned-clocks = <&cru SCLK_NANDC>;
+		assigned-clock-rates = <150000000>;
+		status = "disabled";
+	};
+
+	emmc: mmc@30110000 {
+		compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x30110000 0x4000>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		status = "disabled";
+	};
+
+	sdio: mmc@30120000 {
+		compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x30120000 0x4000>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		status = "disabled";
+	};
+
+	sdmmc: mmc@30130000 {
+		compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x30130000 0x4000>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <100000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+		status = "disabled";
+	};
+
+	usb_host_ehci: usb@30140000 {
+		compatible = "generic-ehci";
+		reg = <0x30140000 0x20000>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST0>, <&u2phy>;
+		phys = <&u2phy_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host_ohci: usb@30160000 {
+		compatible = "generic-ohci";
+		reg = <0x30160000 0x20000>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST0>, <&u2phy>;
+		phys = <&u2phy_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_otg: usb@30180000 {
+		compatible = "rockchip,rv1108-usb", "rockchip,rk3066-usb",
+			     "snps,dwc2";
+		reg = <0x30180000 0x40000>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <280>;
+		g-tx-fifo-size = <256 128 128 64 32 16>;
+		phys = <&u2phy_otg>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	sfc: spi@301c0000 {
+		compatible = "rockchip,sfc";
+		reg = <0x301c0000 0x4000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+		clock-names = "clk_sfc", "hclk_sfc";
+		pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus4>;
+		pinctrl-names = "default";
+		status = "disabled";
+	};
+
+	gmac: ethernet@30200000 {
+		compatible = "rockchip,rv1108-gmac";
+		reg = <0x30200000 0x10000>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq", "eth_wake_irq";
+		clocks = <&cru SCLK_MAC>,
+			<&cru SCLK_MAC_RX>, <&cru SCLK_MAC_RX>,
+			<&cru SCLK_MAC_REF>, <&cru SCLK_MAC_REFOUT>,
+			<&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+		clock-names = "stmmaceth",
+			"mac_clk_rx", "mac_clk_tx",
+			"clk_mac_ref", "clk_mac_refout",
+			"aclk_mac", "pclk_mac";
+		/* rv1108 only supports an rmii interface */
+		phy-mode = "rmii";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rmii_pins>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@32010000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0x32011000 0x1000>,
+		      <0x32012000 0x2000>,
+		      <0x32014000 0x2000>,
+		      <0x32016000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rv1108-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmugrf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio@20030000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20030000 0x100>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0_PMU>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@10310000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x10310000 0x100>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@10320000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x10320000 0x100>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@10330000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x10330000 0x100>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma {
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_none_smt: pcfg-pull-none-smt {
+			bias-disable;
+			input-schmitt-enable;
+		};
+
+		pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+			bias-pull-up;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_none_drv_4ma: pcfg-pull-none-drv-4ma {
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_up_drv_4ma: pcfg-pull-up-drv-4ma {
+			bias-pull-up;
+			drive-strength = <4>;
+		};
+
+		pcfg_output_high: pcfg-output-high {
+			output-high;
+		};
+
+		pcfg_output_low: pcfg-output-low {
+			output-low;
+		};
+
+		pcfg_input_high: pcfg-input-high {
+			bias-pull-up;
+			input-enable;
+		};
+
+		emmc {
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins = <2 RK_PA0 2 &pcfg_pull_up_drv_8ma>,
+						<2 RK_PA1 2 &pcfg_pull_up_drv_8ma>,
+						<2 RK_PA2 2 &pcfg_pull_up_drv_8ma>,
+						<2 RK_PA3 2 &pcfg_pull_up_drv_8ma>,
+						<2 RK_PA4 2 &pcfg_pull_up_drv_8ma>,
+						<2 RK_PA5 2 &pcfg_pull_up_drv_8ma>,
+						<2 RK_PA6 2 &pcfg_pull_up_drv_8ma>,
+						<2 RK_PA7 2 &pcfg_pull_up_drv_8ma>;
+			};
+
+			emmc_clk: emmc-clk {
+				rockchip,pins = <2 RK_PB6 1 &pcfg_pull_none_drv_8ma>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <2 RK_PB4 2 &pcfg_pull_up_drv_8ma>;
+			};
+		};
+
+		sfc {
+			sfc_bus4: sfc-bus4 {
+				rockchip,pins =
+					<2 RK_PA0 3 &pcfg_pull_none>,
+					<2 RK_PA1 3 &pcfg_pull_none>,
+					<2 RK_PA2 3 &pcfg_pull_none>,
+					<2 RK_PA3 3 &pcfg_pull_none>;
+			};
+
+			sfc_bus2: sfc-bus2 {
+				rockchip,pins =
+					<2 RK_PA0 3 &pcfg_pull_none>,
+					<2 RK_PA1 3 &pcfg_pull_none>;
+			};
+
+			sfc_cs0: sfc-cs0 {
+				rockchip,pins =
+					<2 RK_PB4 3 &pcfg_pull_none>;
+			};
+
+			sfc_clk: sfc-clk {
+				rockchip,pins =
+					<2 RK_PB7 2 &pcfg_pull_none>;
+			};
+		};
+
+		gmac {
+			rmii_pins: rmii-pins {
+				rockchip,pins = <1 RK_PC5 2 &pcfg_pull_none>,
+						<1 RK_PC3 2 &pcfg_pull_none>,
+						<1 RK_PC4 2 &pcfg_pull_none>,
+						<1 RK_PB2 3 &pcfg_pull_none_drv_12ma>,
+						<1 RK_PB3 3 &pcfg_pull_none_drv_12ma>,
+						<1 RK_PB4 3 &pcfg_pull_none_drv_12ma>,
+						<1 RK_PB5 3 &pcfg_pull_none>,
+						<1 RK_PB6 3 &pcfg_pull_none>,
+						<1 RK_PB7 3 &pcfg_pull_none>,
+						<1 RK_PC2 3 &pcfg_pull_none>;
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <0 RK_PB1 1 &pcfg_pull_none_smt>,
+						<0 RK_PB2 1 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <2 RK_PD3 1 &pcfg_pull_up>,
+						<2 RK_PD4 1 &pcfg_pull_up>;
+			};
+		};
+
+		i2c2m1 {
+			i2c2m1_xfer: i2c2m1-xfer {
+				rockchip,pins = <0 RK_PC2 2 &pcfg_pull_none>,
+						<0 RK_PC6 3 &pcfg_pull_none>;
+			};
+
+			i2c2m1_pins: i2c2m1-pins {
+				rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,
+						<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		i2c2m05v {
+			i2c2m05v_xfer: i2c2m05v-xfer {
+				rockchip,pins = <1 RK_PD5 2 &pcfg_pull_none>,
+						<1 RK_PD4 2 &pcfg_pull_none>;
+			};
+
+			i2c2m05v_pins: i2c2m05v-pins {
+				rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
+						<1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <0 RK_PB6 1 &pcfg_pull_none>,
+						<0 RK_PC4 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <0 RK_PC5 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <0 RK_PC4 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins = <0 RK_PC6 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <0 RK_PC0 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm4 {
+			pwm4_pin: pwm4-pin {
+				rockchip,pins = <1 RK_PC1 3 &pcfg_pull_none>;
+			};
+		};
+
+		pwm5 {
+			pwm5_pin: pwm5-pin {
+				rockchip,pins = <1 RK_PA7 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm6 {
+			pwm6_pin: pwm6-pin {
+				rockchip,pins = <1 RK_PB0 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm7 {
+			pwm7_pin: pwm7-pin {
+				rockchip,pins = <1 RK_PB1 2 &pcfg_pull_none>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins = <3 RK_PC4 1 &pcfg_pull_none_drv_4ma>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins = <3 RK_PC5 1 &pcfg_pull_up_drv_4ma>;
+			};
+
+			sdmmc_cd: sdmmc-cd {
+				rockchip,pins = <0 RK_PA1 1 &pcfg_pull_up_drv_4ma>;
+			};
+
+			sdmmc_bus1: sdmmc-bus1 {
+				rockchip,pins = <3 RK_PC3 1 &pcfg_pull_up_drv_4ma>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins = <3 RK_PC3 1 &pcfg_pull_up_drv_4ma>,
+						<3 RK_PC2 1 &pcfg_pull_up_drv_4ma>,
+						<3 RK_PC1 1 &pcfg_pull_up_drv_4ma>,
+						<3 RK_PC0 1 &pcfg_pull_up_drv_4ma>;
+			};
+		};
+
+		spim0 {
+			spim0_clk: spim0-clk {
+				rockchip,pins = <1 RK_PD0 2 &pcfg_pull_up>;
+			};
+
+			spim0_cs0: spim0-cs0 {
+				rockchip,pins = <1 RK_PD1 2 &pcfg_pull_up>;
+			};
+
+			spim0_tx: spim0-tx {
+				rockchip,pins = <1 RK_PD3 2 &pcfg_pull_up>;
+			};
+
+			spim0_rx: spim0-rx {
+				rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up>;
+			};
+		};
+
+		spim1 {
+			spim1_clk: spim1-clk {
+				rockchip,pins = <0 RK_PA3 1 &pcfg_pull_up>;
+			};
+
+			spim1_cs0: spim1-cs0 {
+				rockchip,pins = <0 RK_PA4 1 &pcfg_pull_up>;
+			};
+
+			spim1_rx: spim1-rx {
+				rockchip,pins = <0 RK_PB0 1 &pcfg_pull_up>;
+			};
+
+			spim1_tx: spim1-tx {
+				rockchip,pins = <0 RK_PA7 1 &pcfg_pull_up>;
+			};
+		};
+
+		tsadc {
+			otp_out: otp-out {
+				rockchip,pins = <0 RK_PB7 1 &pcfg_pull_none>;
+			};
+
+			otp_pin: otp-pin {
+				rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <3 RK_PA6 1 &pcfg_pull_up>,
+						<3 RK_PA5 1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <3 RK_PA4 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <3 RK_PA3 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts_pin: uart0-rts-pin {
+				rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <1 RK_PD3 1 &pcfg_pull_up>,
+						<1 RK_PD2 1 &pcfg_pull_none>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <1 RK_PD1 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2m0 {
+			uart2m0_xfer: uart2m0-xfer {
+				rockchip,pins = <2 RK_PD2 1 &pcfg_pull_up>,
+						<2 RK_PD1 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2m1 {
+			uart2m1_xfer: uart2m1-xfer {
+				rockchip,pins = <3 RK_PC3 2 &pcfg_pull_up>,
+						<3 RK_PC2 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart2_5v {
+			uart2_5v_cts: uart2_5v-cts {
+				rockchip,pins = <1 RK_PD4 1 &pcfg_pull_none>;
+			};
+
+			uart2_5v_rts: uart2_5v-rts {
+				rockchip,pins = <1 RK_PD5 1 &pcfg_pull_none>;
+			};
+		};
+	};
+};