Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 668 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
new file mode 100644
index 000000000..4982e04ea
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -0,0 +1,668 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * omap_hwmod_2xxx_ipblock_data.c - common IP block data for OMAP2xxx
+ *
+ * Copyright (C) 2011 Nokia Corporation
+ * Paul Walmsley
+ */
+
+#include <linux/types.h>
+
+#include "omap_hwmod.h"
+#include "omap_hwmod_common_data.h"
+#include "cm-regbits-24xx.h"
+#include "prm-regbits-24xx.h"
+#include "wd_timer.h"
+
+/*
+ * 'dispc' class
+ * display controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap2_dispc_hwmod_class = {
+	.name	= "dispc",
+	.sysc	= &omap2_dispc_sysc,
+};
+
+/* OMAP2xxx Timer Common */
+static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+			   SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap2xxx_timer_hwmod_class = {
+	.name	= "timer",
+	.sysc	= &omap2xxx_timer_sysc,
+};
+
+/*
+ * 'wd_timer' class
+ * 32-bit watchdog upward counter that generates a pulse on the reset pin on
+ * overflow condition
+ */
+
+static struct omap_hwmod_class_sysconfig omap2xxx_wd_timer_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_SOFTRESET |
+			   SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap2xxx_wd_timer_hwmod_class = {
+	.name		= "wd_timer",
+	.sysc		= &omap2xxx_wd_timer_sysc,
+	.pre_shutdown	= &omap2_wd_timer_disable,
+	.reset		= &omap2_wd_timer_reset,
+};
+
+/*
+ * 'gpio' class
+ * general purpose io module
+ */
+static struct omap_hwmod_class_sysconfig omap2xxx_gpio_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			   SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+struct omap_hwmod_class omap2xxx_gpio_hwmod_class = {
+	.name = "gpio",
+	.sysc = &omap2xxx_gpio_sysc,
+};
+
+/*
+ * 'mailbox' class
+ * mailbox module allowing communication between the on-chip processors
+ * using a queued mailbox-interrupt mechanism.
+ */
+
+static struct omap_hwmod_class_sysconfig omap2xxx_mailbox_sysc = {
+	.rev_offs	= 0x000,
+	.sysc_offs	= 0x010,
+	.syss_offs	= 0x014,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+struct omap_hwmod_class omap2xxx_mailbox_hwmod_class = {
+	.name	= "mailbox",
+	.sysc	= &omap2xxx_mailbox_sysc,
+};
+
+/*
+ * 'mcspi' class
+ * multichannel serial port interface (mcspi) / master/slave synchronous serial
+ * bus
+ */
+
+static struct omap_hwmod_class_sysconfig omap2xxx_mcspi_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+				SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+				SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+struct omap_hwmod_class omap2xxx_mcspi_class = {
+	.name	= "mcspi",
+	.sysc	= &omap2xxx_mcspi_sysc,
+};
+
+/*
+ * 'gpmc' class
+ * general purpose memory controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap2xxx_gpmc_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap2xxx_gpmc_hwmod_class = {
+	.name	= "gpmc",
+	.sysc	= &omap2xxx_gpmc_sysc,
+};
+
+/*
+ * IP blocks
+ */
+
+/* L3 */
+struct omap_hwmod omap2xxx_l3_main_hwmod = {
+	.name		= "l3_main",
+	.class		= &l3_hwmod_class,
+	.flags		= HWMOD_NO_IDLEST,
+};
+
+/* L4 CORE */
+struct omap_hwmod omap2xxx_l4_core_hwmod = {
+	.name		= "l4_core",
+	.class		= &l4_hwmod_class,
+	.flags		= HWMOD_NO_IDLEST,
+};
+
+/* L4 WKUP */
+struct omap_hwmod omap2xxx_l4_wkup_hwmod = {
+	.name		= "l4_wkup",
+	.class		= &l4_hwmod_class,
+	.flags		= HWMOD_NO_IDLEST,
+};
+
+/* MPU */
+struct omap_hwmod omap2xxx_mpu_hwmod = {
+	.name		= "mpu",
+	.class		= &mpu_hwmod_class,
+	.main_clk	= "mpu_ck",
+};
+
+/* timer3 */
+struct omap_hwmod omap2xxx_timer3_hwmod = {
+	.name		= "timer3",
+	.main_clk	= "gpt3_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT,
+		},
+	},
+	.class		= &omap2xxx_timer_hwmod_class,
+	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
+};
+
+/* timer4 */
+struct omap_hwmod omap2xxx_timer4_hwmod = {
+	.name		= "timer4",
+	.main_clk	= "gpt4_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT,
+		},
+	},
+	.class		= &omap2xxx_timer_hwmod_class,
+	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
+};
+
+/* timer5 */
+struct omap_hwmod omap2xxx_timer5_hwmod = {
+	.name		= "timer5",
+	.main_clk	= "gpt5_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT,
+		},
+	},
+	.class		= &omap2xxx_timer_hwmod_class,
+	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
+};
+
+/* timer6 */
+struct omap_hwmod omap2xxx_timer6_hwmod = {
+	.name		= "timer6",
+	.main_clk	= "gpt6_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT,
+		},
+	},
+	.class		= &omap2xxx_timer_hwmod_class,
+	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
+};
+
+/* timer7 */
+struct omap_hwmod omap2xxx_timer7_hwmod = {
+	.name		= "timer7",
+	.main_clk	= "gpt7_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT,
+		},
+	},
+	.class		= &omap2xxx_timer_hwmod_class,
+	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
+};
+
+/* timer8 */
+struct omap_hwmod omap2xxx_timer8_hwmod = {
+	.name		= "timer8",
+	.main_clk	= "gpt8_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT,
+		},
+	},
+	.class		= &omap2xxx_timer_hwmod_class,
+	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
+};
+
+/* timer9 */
+struct omap_hwmod omap2xxx_timer9_hwmod = {
+	.name		= "timer9",
+	.main_clk	= "gpt9_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT,
+		},
+	},
+	.class		= &omap2xxx_timer_hwmod_class,
+	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
+};
+
+/* timer10 */
+struct omap_hwmod omap2xxx_timer10_hwmod = {
+	.name		= "timer10",
+	.main_clk	= "gpt10_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT,
+		},
+	},
+	.class		= &omap2xxx_timer_hwmod_class,
+	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
+};
+
+/* timer11 */
+struct omap_hwmod omap2xxx_timer11_hwmod = {
+	.name		= "timer11",
+	.main_clk	= "gpt11_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT,
+		},
+	},
+	.class		= &omap2xxx_timer_hwmod_class,
+	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
+};
+
+/* timer12 */
+struct omap_hwmod omap2xxx_timer12_hwmod = {
+	.name		= "timer12",
+	.main_clk	= "gpt12_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT,
+		},
+	},
+	.class		= &omap2xxx_timer_hwmod_class,
+	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
+};
+
+/* wd_timer2 */
+struct omap_hwmod omap2xxx_wd_timer2_hwmod = {
+	.name		= "wd_timer2",
+	.class		= &omap2xxx_wd_timer_hwmod_class,
+	.main_clk	= "mpu_wdt_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_MPU_WDT_SHIFT,
+		},
+	},
+};
+
+/* UART1 */
+
+struct omap_hwmod omap2xxx_uart1_hwmod = {
+	.name		= "uart1",
+	.main_clk	= "uart1_fck",
+	.flags		= DEBUG_OMAP2UART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT,
+		},
+	},
+	.class		= &omap2_uart_class,
+};
+
+/* UART2 */
+
+struct omap_hwmod omap2xxx_uart2_hwmod = {
+	.name		= "uart2",
+	.main_clk	= "uart2_fck",
+	.flags		= DEBUG_OMAP2UART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT,
+		},
+	},
+	.class		= &omap2_uart_class,
+};
+
+/* UART3 */
+
+struct omap_hwmod omap2xxx_uart3_hwmod = {
+	.name		= "uart3",
+	.main_clk	= "uart3_fck",
+	.flags		= DEBUG_OMAP2UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 2,
+			.idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT,
+		},
+	},
+	.class		= &omap2_uart_class,
+};
+
+/* dss */
+
+static struct omap_hwmod_opt_clk dss_opt_clks[] = {
+	/*
+	 * The DSS HW needs all DSS clocks enabled during reset. The dss_core
+	 * driver does not use these clocks.
+	 */
+	{ .role = "tv_clk", .clk = "dss_54m_fck" },
+	{ .role = "sys_clk", .clk = "dss2_fck" },
+};
+
+struct omap_hwmod omap2xxx_dss_core_hwmod = {
+	.name		= "dss_core",
+	.class		= &omap2_dss_hwmod_class,
+	.main_clk	= "dss1_fck", /* instead of dss_fck */
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+		},
+	},
+	.opt_clks	= dss_opt_clks,
+	.opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
+	.flags		= HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+};
+
+struct omap_hwmod omap2xxx_dss_dispc_hwmod = {
+	.name		= "dss_dispc",
+	.class		= &omap2_dispc_hwmod_class,
+	.main_clk	= "dss1_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+		},
+	},
+	.flags		= HWMOD_NO_IDLEST,
+	.dev_attr	= &omap2_3_dss_dispc_dev_attr,
+};
+
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+	{ .role = "ick", .clk = "dss_ick" },
+};
+
+struct omap_hwmod omap2xxx_dss_rfbi_hwmod = {
+	.name		= "dss_rfbi",
+	.class		= &omap2_rfbi_hwmod_class,
+	.main_clk	= "dss1_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+		},
+	},
+	.opt_clks	= dss_rfbi_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
+	.flags		= HWMOD_NO_IDLEST,
+};
+
+struct omap_hwmod omap2xxx_dss_venc_hwmod = {
+	.name		= "dss_venc",
+	.class		= &omap2_venc_hwmod_class,
+	.main_clk	= "dss_54m_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+		},
+	},
+	.flags		= HWMOD_NO_IDLEST,
+};
+
+/* gpio1 */
+struct omap_hwmod omap2xxx_gpio1_hwmod = {
+	.name		= "gpio1",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+		},
+	},
+	.class		= &omap2xxx_gpio_hwmod_class,
+};
+
+/* gpio2 */
+struct omap_hwmod omap2xxx_gpio2_hwmod = {
+	.name		= "gpio2",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+		},
+	},
+	.class		= &omap2xxx_gpio_hwmod_class,
+};
+
+/* gpio3 */
+struct omap_hwmod omap2xxx_gpio3_hwmod = {
+	.name		= "gpio3",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+		},
+	},
+	.class		= &omap2xxx_gpio_hwmod_class,
+};
+
+/* gpio4 */
+struct omap_hwmod omap2xxx_gpio4_hwmod = {
+	.name		= "gpio4",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+		},
+	},
+	.class		= &omap2xxx_gpio_hwmod_class,
+};
+
+/* mcspi1 */
+struct omap_hwmod omap2xxx_mcspi1_hwmod = {
+	.name		= "mcspi1",
+	.main_clk	= "mcspi1_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_MCSPI1_SHIFT,
+		},
+	},
+	.class		= &omap2xxx_mcspi_class,
+};
+
+/* mcspi2 */
+struct omap_hwmod omap2xxx_mcspi2_hwmod = {
+	.name		= "mcspi2",
+	.main_clk	= "mcspi2_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_MCSPI2_SHIFT,
+		},
+	},
+	.class		= &omap2xxx_mcspi_class,
+};
+
+/* gpmc */
+struct omap_hwmod omap2xxx_gpmc_hwmod = {
+	.name		= "gpmc",
+	.class		= &omap2xxx_gpmc_hwmod_class,
+	.main_clk	= "gpmc_fck",
+	/* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */
+	.flags		= HWMOD_NO_IDLEST | DEBUG_OMAP_GPMC_HWMOD_FLAGS,
+	.prcm		= {
+		.omap2	= {
+			.module_offs = CORE_MOD,
+		},
+	},
+};
+
+/* RNG */
+
+static struct omap_hwmod_class_sysconfig omap2_rng_sysc = {
+	.rev_offs	= 0x3c,
+	.sysc_offs	= 0x40,
+	.syss_offs	= 0x44,
+	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			   SYSS_HAS_RESET_STATUS),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap2_rng_hwmod_class = {
+	.name		= "rng",
+	.sysc		= &omap2_rng_sysc,
+};
+
+struct omap_hwmod omap2xxx_rng_hwmod = {
+	.name		= "rng",
+	.main_clk	= "l4_ck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 4,
+			.idlest_idle_bit = OMAP24XX_ST_RNG_SHIFT,
+		},
+	},
+	/*
+	 * XXX The first read from the SYSSTATUS register of the RNG
+	 * after the SYSCONFIG SOFTRESET bit is set triggers an
+	 * imprecise external abort.  It's unclear why this happens.
+	 * Until this is analyzed, skip the IP block reset.
+	 */
+	.flags		= HWMOD_INIT_NO_RESET,
+	.class		= &omap2_rng_hwmod_class,
+};
+
+/* SHAM */
+
+static struct omap_hwmod_class_sysconfig omap2_sham_sysc = {
+	.rev_offs	= 0x5c,
+	.sysc_offs	= 0x60,
+	.syss_offs	= 0x64,
+	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			   SYSS_HAS_RESET_STATUS),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap2xxx_sham_class = {
+	.name	= "sham",
+	.sysc	= &omap2_sham_sysc,
+};
+
+struct omap_hwmod omap2xxx_sham_hwmod = {
+	.name		= "sham",
+	.main_clk	= "l4_ck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 4,
+			.idlest_idle_bit = OMAP24XX_ST_SHA_SHIFT,
+		},
+	},
+	.class		= &omap2xxx_sham_class,
+};
+
+/* AES */
+
+static struct omap_hwmod_class_sysconfig omap2_aes_sysc = {
+	.rev_offs	= 0x44,
+	.sysc_offs	= 0x48,
+	.syss_offs	= 0x4c,
+	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			   SYSS_HAS_RESET_STATUS),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap2xxx_aes_class = {
+	.name	= "aes",
+	.sysc	= &omap2_aes_sysc,
+};
+
+struct omap_hwmod omap2xxx_aes_hwmod = {
+	.name		= "aes",
+	.main_clk	= "l4_ck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 4,
+			.idlest_idle_bit = OMAP24XX_ST_AES_SHIFT,
+		},
+	},
+	.class		= &omap2xxx_aes_class,
+};