Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 527 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
new file mode 100644
index 000000000..9cbd6dd8f
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
@@ -0,0 +1,527 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+
+#include <dt-bindings/clock/mt8516-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+
+#include "mt8516-pinfunc.h"
+
+/ {
+	compatible = "mediatek,mt8516";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp-598000000 {
+			opp-hz = /bits/ 64 <598000000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-747500000 {
+			opp-hz = /bits/ 64 <747500000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-1040000000 {
+			opp-hz = /bits/ 64 <1040000000>;
+			opp-microvolt = <1200000>;
+		};
+		opp-1196000000 {
+			opp-hz = /bits/ 64 <1196000000>;
+			opp-microvolt = <1250000>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1300000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>,
+				<&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>;
+			clocks = <&infracfg CLK_IFR_MUX1_SEL>,
+				 <&topckgen CLK_TOP_MAINPLL_D2>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x1>;
+			enable-method = "psci";
+			cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>,
+				<&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>;
+			clocks = <&infracfg CLK_IFR_MUX1_SEL>,
+				 <&topckgen CLK_TOP_MAINPLL_D2>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x2>;
+			enable-method = "psci";
+			cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>,
+				<&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>;
+			clocks = <&infracfg CLK_IFR_MUX1_SEL>,
+				 <&topckgen CLK_TOP_MAINPLL_D2>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x3>;
+			enable-method = "psci";
+			cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>,
+				<&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>;
+			clocks = <&infracfg CLK_IFR_MUX1_SEL>,
+				 <&topckgen CLK_TOP_MAINPLL_D2>;
+			clock-names = "cpu", "intermediate", "armpll";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				entry-latency-us = <600>;
+				exit-latency-us = <600>;
+				min-residency-us = <1200>;
+				arm,psci-suspend-param = <0x0010000>;
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				entry-latency-us = <800>;
+				exit-latency-us = <1000>;
+				min-residency-us = <2000>;
+				arm,psci-suspend-param = <0x2010000>;
+			};
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	clk26m: clk26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: clk32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "clk32k";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 128 KiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_reserved: secmon@43000000 {
+			no-map;
+			reg = <0 0x43000000 0 0x20000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		topckgen: topckgen@10000000 {
+			compatible = "mediatek,mt8516-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: infracfg@10001000 {
+			compatible = "mediatek,mt8516-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pericfg: pericfg@10003050 {
+			compatible = "mediatek,mt8516-pericfg", "syscon";
+			reg = <0 0x10003050 0 0x1000>;
+		};
+
+		apmixedsys: apmixedsys@10018000 {
+			compatible = "mediatek,mt8516-apmixedsys", "syscon";
+			reg = <0 0x10018000 0 0x710>;
+			#clock-cells = <1>;
+		};
+
+		watchdog@10007000 {
+			compatible = "mediatek,mt8516-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0 0x10007000 0 0x1000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_FALLING>;
+			#reset-cells = <1>;
+		};
+
+		timer: timer@10008000 {
+			compatible = "mediatek,mt8516-timer",
+				     "mediatek,mt6577-timer";
+			reg = <0 0x10008000 0 0x1000>;
+			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_CLK26M_D2>,
+				 <&topckgen CLK_TOP_APXGPT>;
+			clock-names = "clk13m", "bus";
+		};
+
+		syscfg_pctl: syscfg-pctl@10005000 {
+			compatible = "syscon";
+			reg = <0 0x10005000 0 0x1000>;
+		};
+
+		pio: pinctrl@1000b000 {
+			compatible = "mediatek,mt8516-pinctrl";
+			reg = <0 0x1000b000 0 0x1000>;
+			mediatek,pctl-regmap = <&syscfg_pctl>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		efuse: efuse@10009000 {
+			compatible = "mediatek,mt8516-efuse", "mediatek,efuse";
+			reg = <0 0x10009000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		pwrap: pwrap@1000f000 {
+			compatible = "mediatek,mt8516-pwrap";
+			reg = <0 0x1000f000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_PMICWRAP_26M>,
+				 <&topckgen CLK_TOP_PMICWRAP_AP>;
+			clock-names = "spi", "wrap";
+		};
+
+		sysirq: interrupt-controller@10200620 {
+			compatible = "mediatek,mt8516-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200620 0 0x20>;
+		};
+
+		gic: interrupt-controller@10310000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x10310000 0 0x1000>,
+			      <0 0x10320000 0 0x1000>,
+			      <0 0x10340000 0 0x2000>,
+			      <0 0x10360000 0 0x2000>;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		apdma: dma-controller@11000480 {
+			compatible = "mediatek,mt8516-uart-dma",
+				     "mediatek,mt6577-uart-dma";
+			reg = <0 0x11000480 0 0x80>,
+			      <0 0x11000500 0 0x80>,
+			      <0 0x11000580 0 0x80>,
+			      <0 0x11000600 0 0x80>,
+			      <0 0x11000980 0 0x80>,
+			      <0 0x11000a00 0 0x80>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_LOW>;
+			dma-requests = <6>;
+			clocks = <&topckgen CLK_TOP_APDMA>;
+			clock-names = "apdma";
+			#dma-cells = <1>;
+		};
+
+		uart0: serial@11005000 {
+			compatible = "mediatek,mt8516-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11005000 0 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART0_SEL>,
+				 <&topckgen CLK_TOP_UART0>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 0
+				&apdma 1>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart1: serial@11006000 {
+			compatible = "mediatek,mt8516-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11006000 0 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART1_SEL>,
+				 <&topckgen CLK_TOP_UART1>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 2
+				&apdma 3>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart2: serial@11007000 {
+			compatible = "mediatek,mt8516-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11007000 0 0x1000>;
+			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART2_SEL>,
+				 <&topckgen CLK_TOP_UART2>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 4
+				&apdma 5>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@11009000 {
+			compatible = "mediatek,mt8516-i2c",
+				     "mediatek,mt2712-i2c";
+			reg = <0 0x11009000 0 0x90>,
+			      <0 0x11000180 0 0x80>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_I2C0>,
+				 <&topckgen CLK_TOP_APDMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@1100a000 {
+			compatible = "mediatek,mt8516-i2c",
+				     "mediatek,mt2712-i2c";
+			reg = <0 0x1100a000 0 0x90>,
+			      <0 0x11000200 0 0x80>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_I2C1>,
+				 <&topckgen CLK_TOP_APDMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@1100b000 {
+			compatible = "mediatek,mt8516-i2c",
+				     "mediatek,mt2712-i2c";
+			reg = <0 0x1100b000 0 0x90>,
+			      <0 0x11000280 0 0x80>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_I2C2>,
+				 <&topckgen CLK_TOP_APDMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi: spi@1100c000 {
+			compatible = "mediatek,mt8516-spi",
+				     "mediatek,mt2712-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100c000 0 0x1000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D12>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&topckgen CLK_TOP_SPI>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		mmc0: mmc@11120000 {
+			compatible = "mediatek,mt8516-mmc";
+			reg = <0 0x11120000 0 0x1000>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC0>,
+				 <&topckgen CLK_TOP_AHB_INFRA_SEL>,
+				 <&topckgen CLK_TOP_MSDC0_INFRA>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11130000 {
+			compatible = "mediatek,mt8516-mmc";
+			reg = <0 0x11130000 0 0x1000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC1>,
+				 <&topckgen CLK_TOP_AHB_INFRA_SEL>,
+				 <&topckgen CLK_TOP_MSDC1_INFRA>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc2: mmc@11170000 {
+			compatible = "mediatek,mt8516-mmc";
+			reg = <0 0x11170000 0 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC2>,
+				 <&topckgen CLK_TOP_RG_MSDC2>,
+				 <&topckgen CLK_TOP_MSDC2_INFRA>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		ethernet: ethernet@11180000 {
+			compatible = "mediatek,mt8516-eth";
+			reg = <0 0x11180000 0 0x1000>;
+			mediatek,pericfg = <&pericfg>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_RG_ETH>,
+				 <&topckgen CLK_TOP_66M_ETH>,
+				 <&topckgen CLK_TOP_133M_ETH>;
+			clock-names = "core", "reg", "trans";
+			status = "disabled";
+		};
+
+		rng: rng@1020c000 {
+			compatible = "mediatek,mt8516-rng",
+				     "mediatek,mt7623-rng";
+			reg = <0 0x1020c000 0 0x100>;
+			clocks = <&topckgen CLK_TOP_TRNG>;
+			clock-names = "rng";
+		};
+
+		pwm: pwm@11008000 {
+			compatible = "mediatek,mt8516-pwm";
+			reg = <0 0x11008000 0 0x1000>;
+			#pwm-cells = <2>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_PWM>,
+				 <&topckgen CLK_TOP_PWM_B>,
+				 <&topckgen CLK_TOP_PWM1_FB>,
+				 <&topckgen CLK_TOP_PWM2_FB>,
+				 <&topckgen CLK_TOP_PWM3_FB>,
+				 <&topckgen CLK_TOP_PWM4_FB>,
+				 <&topckgen CLK_TOP_PWM5_FB>;
+			clock-names = "top", "main", "pwm1", "pwm2", "pwm3",
+				      "pwm4", "pwm5";
+		};
+
+		usb0: usb@11100000 {
+			compatible = "mediatek,mt8516-musb", "mediatek,mtk-musb";
+			reg = <0 0x11100000 0 0x1000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "mc";
+			phys = <&usb0_port PHY_TYPE_USB2>;
+			clocks = <&topckgen CLK_TOP_USB>,
+				 <&topckgen CLK_TOP_USBIF>,
+				 <&topckgen CLK_TOP_USB_1P>;
+			clock-names = "main","mcu","univpll";
+			status = "disabled";
+		};
+
+		usb1: usb@11190000 {
+			compatible = "mediatek,mt8516-musb", "mediatek,mtk-musb";
+			reg = <0 0x11190000 0 0x1000>;
+			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "mc";
+			phys = <&usb1_port PHY_TYPE_USB2>;
+			clocks = <&topckgen CLK_TOP_USB>,
+				 <&topckgen CLK_TOP_USBIF>,
+				 <&topckgen CLK_TOP_USB_1P>;
+			clock-names = "main","mcu","univpll";
+			dr_mode = "host";
+			status = "disabled";
+		};
+
+		usb_phy: t-phy@11110000 {
+			compatible = "mediatek,mt8516-tphy",
+				     "mediatek,generic-tphy-v1";
+			reg = <0 0x11110000 0 0x800>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			usb0_port: usb-phy@11110800 {
+				reg = <0 0x11110800 0 0x100>;
+				clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+
+			usb1_port: usb-phy@11110900 {
+				reg = <0 0x11110900 0 0x100>;
+				clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		auxadc: adc@11003000 {
+			compatible = "mediatek,mt8516-auxadc",
+				     "mediatek,mt8173-auxadc";
+			reg = <0 0x11003000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_AUX_ADC>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+	};
+};