Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 162 insertions, 0 deletions

diff --git a/arch/arm64/lib/strnlen.S b/arch/arm64/lib/strnlen.S
new file mode 100644
index 000000000..d5ac0e10a
--- /dev/null
+++ b/arch/arm64/lib/strnlen.S
@@ -0,0 +1,162 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2013 ARM Ltd.
+ * Copyright (C) 2013 Linaro.
+ *
+ * This code is based on glibc cortex strings work originally authored by Linaro
+ * be found @
+ *
+ * http://bazaar.launchpad.net/~linaro-toolchain-dev/cortex-strings/trunk/
+ * files/head:/src/aarch64/
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * determine the length of a fixed-size string
+ *
+ * Parameters:
+ *	x0 - const string pointer
+ *	x1 - maximal string length
+ * Returns:
+ *	x0 - the return length of specific string
+ */
+
+/* Arguments and results.  */
+srcin		.req	x0
+len		.req	x0
+limit		.req	x1
+
+/* Locals and temporaries.  */
+src		.req	x2
+data1		.req	x3
+data2		.req	x4
+data2a		.req	x5
+has_nul1	.req	x6
+has_nul2	.req	x7
+tmp1		.req	x8
+tmp2		.req	x9
+tmp3		.req	x10
+tmp4		.req	x11
+zeroones	.req	x12
+pos		.req	x13
+limit_wd	.req	x14
+
+#define REP8_01 0x0101010101010101
+#define REP8_7f 0x7f7f7f7f7f7f7f7f
+#define REP8_80 0x8080808080808080
+
+SYM_FUNC_START(__pi_strnlen)
+	cbz	limit, .Lhit_limit
+	mov	zeroones, #REP8_01
+	bic	src, srcin, #15
+	ands	tmp1, srcin, #15
+	b.ne	.Lmisaligned
+	/* Calculate the number of full and partial words -1.  */
+	sub	limit_wd, limit, #1 /* Limit != 0, so no underflow.  */
+	lsr	limit_wd, limit_wd, #4  /* Convert to Qwords.  */
+
+	/*
+	* NUL detection works on the principle that (X - 1) & (~X) & 0x80
+	* (=> (X - 1) & ~(X | 0x7f)) is non-zero iff a byte is zero, and
+	* can be done in parallel across the entire word.
+	*/
+	/*
+	* The inner loop deals with two Dwords at a time.  This has a
+	* slightly higher start-up cost, but we should win quite quickly,
+	* especially on cores with a high number of issue slots per
+	* cycle, as we get much better parallelism out of the operations.
+	*/
+.Lloop:
+	ldp	data1, data2, [src], #16
+.Lrealigned:
+	sub	tmp1, data1, zeroones
+	orr	tmp2, data1, #REP8_7f
+	sub	tmp3, data2, zeroones
+	orr	tmp4, data2, #REP8_7f
+	bic	has_nul1, tmp1, tmp2
+	bic	has_nul2, tmp3, tmp4
+	subs	limit_wd, limit_wd, #1
+	orr	tmp1, has_nul1, has_nul2
+	ccmp	tmp1, #0, #0, pl    /* NZCV = 0000  */
+	b.eq	.Lloop
+
+	cbz	tmp1, .Lhit_limit   /* No null in final Qword.  */
+
+	/*
+	* We know there's a null in the final Qword. The easiest thing
+	* to do now is work out the length of the string and return
+	* MIN (len, limit).
+	*/
+	sub	len, src, srcin
+	cbz	has_nul1, .Lnul_in_data2
+CPU_BE( mov	data2, data1 )	/*perpare data to re-calculate the syndrome*/
+
+	sub	len, len, #8
+	mov	has_nul2, has_nul1
+.Lnul_in_data2:
+	/*
+	* For big-endian, carry propagation (if the final byte in the
+	* string is 0x01) means we cannot use has_nul directly.  The
+	* easiest way to get the correct byte is to byte-swap the data
+	* and calculate the syndrome a second time.
+	*/
+CPU_BE( rev	data2, data2 )
+CPU_BE( sub	tmp1, data2, zeroones )
+CPU_BE( orr	tmp2, data2, #REP8_7f )
+CPU_BE( bic	has_nul2, tmp1, tmp2 )
+
+	sub	len, len, #8
+	rev	has_nul2, has_nul2
+	clz	pos, has_nul2
+	add	len, len, pos, lsr #3       /* Bits to bytes.  */
+	cmp	len, limit
+	csel	len, len, limit, ls     /* Return the lower value.  */
+	ret
+
+.Lmisaligned:
+	/*
+	* Deal with a partial first word.
+	* We're doing two things in parallel here;
+	* 1) Calculate the number of words (but avoiding overflow if
+	* limit is near ULONG_MAX) - to do this we need to work out
+	* limit + tmp1 - 1 as a 65-bit value before shifting it;
+	* 2) Load and mask the initial data words - we force the bytes
+	* before the ones we are interested in to 0xff - this ensures
+	* early bytes will not hit any zero detection.
+	*/
+	ldp	data1, data2, [src], #16
+
+	sub	limit_wd, limit, #1
+	and	tmp3, limit_wd, #15
+	lsr	limit_wd, limit_wd, #4
+
+	add	tmp3, tmp3, tmp1
+	add	limit_wd, limit_wd, tmp3, lsr #4
+
+	neg	tmp4, tmp1
+	lsl	tmp4, tmp4, #3  /* Bytes beyond alignment -> bits.  */
+
+	mov	tmp2, #~0
+	/* Big-endian.  Early bytes are at MSB.  */
+CPU_BE( lsl	tmp2, tmp2, tmp4 )	/* Shift (tmp1 & 63).  */
+	/* Little-endian.  Early bytes are at LSB.  */
+CPU_LE( lsr	tmp2, tmp2, tmp4 )	/* Shift (tmp1 & 63).  */
+
+	cmp	tmp1, #8
+
+	orr	data1, data1, tmp2
+	orr	data2a, data2, tmp2
+
+	csinv	data1, data1, xzr, le
+	csel	data2, data2, data2a, le
+	b	.Lrealigned
+
+.Lhit_limit:
+	mov	len, limit
+	ret
+SYM_FUNC_END(__pi_strnlen)
+
+SYM_FUNC_ALIAS_WEAK(strnlen, __pi_strnlen)
+EXPORT_SYMBOL_NOKASAN(strnlen)