Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 186 insertions, 0 deletions

diff --git a/arch/m68k/68000/ints.c b/arch/m68k/68000/ints.c
new file mode 100644
index 000000000..f9a5ec781
--- /dev/null
+++ b/arch/m68k/68000/ints.c
@@ -0,0 +1,186 @@
+/*
+ * ints.c - Generic interrupt controller support
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 1996 Roman Zippel
+ * Copyright 1999 D. Jeff Dionne <jeff@rt-control.com>
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/traps.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+
+#if defined(CONFIG_M68EZ328)
+#include <asm/MC68EZ328.h>
+#elif defined(CONFIG_M68VZ328)
+#include <asm/MC68VZ328.h>
+#else
+#include <asm/MC68328.h>
+#endif
+
+/* assembler routines */
+asmlinkage void system_call(void);
+asmlinkage void buserr(void);
+asmlinkage void trap(void);
+asmlinkage void trap3(void);
+asmlinkage void trap4(void);
+asmlinkage void trap5(void);
+asmlinkage void trap6(void);
+asmlinkage void trap7(void);
+asmlinkage void trap8(void);
+asmlinkage void trap9(void);
+asmlinkage void trap10(void);
+asmlinkage void trap11(void);
+asmlinkage void trap12(void);
+asmlinkage void trap13(void);
+asmlinkage void trap14(void);
+asmlinkage void trap15(void);
+asmlinkage void trap33(void);
+asmlinkage void trap34(void);
+asmlinkage void trap35(void);
+asmlinkage void trap36(void);
+asmlinkage void trap37(void);
+asmlinkage void trap38(void);
+asmlinkage void trap39(void);
+asmlinkage void trap40(void);
+asmlinkage void trap41(void);
+asmlinkage void trap42(void);
+asmlinkage void trap43(void);
+asmlinkage void trap44(void);
+asmlinkage void trap45(void);
+asmlinkage void trap46(void);
+asmlinkage void trap47(void);
+asmlinkage irqreturn_t bad_interrupt(int, void *);
+asmlinkage irqreturn_t inthandler(void);
+asmlinkage irqreturn_t inthandler1(void);
+asmlinkage irqreturn_t inthandler2(void);
+asmlinkage irqreturn_t inthandler3(void);
+asmlinkage irqreturn_t inthandler4(void);
+asmlinkage irqreturn_t inthandler5(void);
+asmlinkage irqreturn_t inthandler6(void);
+asmlinkage irqreturn_t inthandler7(void);
+
+/* The 68k family did not have a good way to determine the source
+ * of interrupts until later in the family.  The EC000 core does
+ * not provide the vector number on the stack, we vector everything
+ * into one vector and look in the blasted mask register...
+ * This code is designed to be fast, almost constant time, not clean!
+ */
+void process_int(int vec, struct pt_regs *fp)
+{
+	int irq;
+	int mask;
+
+	unsigned long pend = ISR;
+
+	while (pend) {
+		if (pend & 0x0000ffff) {
+			if (pend & 0x000000ff) {
+				if (pend & 0x0000000f) {
+					mask = 0x00000001;
+					irq = 0;
+				} else {
+					mask = 0x00000010;
+					irq = 4;
+				}
+			} else {
+				if (pend & 0x00000f00) {
+					mask = 0x00000100;
+					irq = 8;
+				} else {
+					mask = 0x00001000;
+					irq = 12;
+				}
+			}
+		} else {
+			if (pend & 0x00ff0000) {
+				if (pend & 0x000f0000) {
+					mask = 0x00010000;
+					irq = 16;
+				} else {
+					mask = 0x00100000;
+					irq = 20;
+				}
+			} else {
+				if (pend & 0x0f000000) {
+					mask = 0x01000000;
+					irq = 24;
+				} else {
+					mask = 0x10000000;
+					irq = 28;
+				}
+			}
+		}
+
+		while (! (mask & pend)) {
+			mask <<=1;
+			irq++;
+		}
+
+		do_IRQ(irq, fp);
+		pend &= ~mask;
+	}
+}
+
+static void intc_irq_unmask(struct irq_data *d)
+{
+	IMR &= ~(1 << d->irq);
+}
+
+static void intc_irq_mask(struct irq_data *d)
+{
+	IMR |= (1 << d->irq);
+}
+
+static struct irq_chip intc_irq_chip = {
+	.name		= "M68K-INTC",
+	.irq_mask	= intc_irq_mask,
+	.irq_unmask	= intc_irq_unmask,
+};
+
+/*
+ * This function should be called during kernel startup to initialize
+ * the machine vector table.
+ */
+void __init trap_init(void)
+{
+	int i;
+
+	/* set up the vectors */
+	for (i = 72; i < 256; ++i)
+		_ramvec[i] = (e_vector) bad_interrupt;
+
+	_ramvec[32] = system_call;
+
+	_ramvec[65] = (e_vector) inthandler1;
+	_ramvec[66] = (e_vector) inthandler2;
+	_ramvec[67] = (e_vector) inthandler3;
+	_ramvec[68] = (e_vector) inthandler4;
+	_ramvec[69] = (e_vector) inthandler5;
+	_ramvec[70] = (e_vector) inthandler6;
+	_ramvec[71] = (e_vector) inthandler7;
+}
+
+void __init init_IRQ(void)
+{
+	int i;
+
+	IVR = 0x40; /* Set DragonBall IVR (interrupt base) to 64 */
+
+	/* turn off all interrupts */
+	IMR = ~0;
+
+	for (i = 0; (i < NR_IRQS); i++) {
+		irq_set_chip(i, &intc_irq_chip);
+		irq_set_handler(i, handle_level_irq);
+	}
+}
+