Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 221 insertions, 0 deletions

diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c
new file mode 100644
index 000000000..37fb66355
--- /dev/null
+++ b/arch/m68k/kernel/setup_no.c
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  linux/arch/m68knommu/kernel/setup.c
+ *
+ *  Copyright (C) 1999-2007  Greg Ungerer (gerg@snapgear.com)
+ *  Copyright (C) 1998,1999  D. Jeff Dionne <jeff@uClinux.org>
+ *  Copyleft  ()) 2000       James D. Schettine {james@telos-systems.com}
+ *  Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
+ *  Copyright (C) 1995       Hamish Macdonald
+ *  Copyright (C) 2000       Lineo Inc. (www.lineo.com)
+ *  Copyright (C) 2001 	     Lineo, Inc. <www.lineo.com>
+ *
+ *  68VZ328 Fixes/support    Evan Stawnyczy <e@lineo.ca>
+ */
+
+/*
+ * This file handles the architecture-dependent parts of system setup
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/memblock.h>
+#include <linux/seq_file.h>
+#include <linux/init.h>
+#include <linux/initrd.h>
+#include <linux/root_dev.h>
+#include <linux/rtc.h>
+
+#include <asm/setup.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/machdep.h>
+#include <asm/sections.h>
+
+unsigned long memory_start;
+unsigned long memory_end;
+
+EXPORT_SYMBOL(memory_start);
+EXPORT_SYMBOL(memory_end);
+
+char __initdata command_line[COMMAND_LINE_SIZE];
+
+/* machine dependent timer functions */
+void (*mach_sched_init)(void) __initdata = NULL;
+
+/* machine dependent reboot functions */
+void (*mach_reset)(void);
+void (*mach_halt)(void);
+
+#ifdef CONFIG_M68000
+#if defined(CONFIG_M68328)
+#define CPU_NAME	"MC68328"
+#elif defined(CONFIG_M68EZ328)
+#define CPU_NAME	"MC68EZ328"
+#elif defined(CONFIG_M68VZ328)
+#define CPU_NAME	"MC68VZ328"
+#else
+#define CPU_NAME	"MC68000"
+#endif
+#endif /* CONFIG_M68000 */
+#ifndef CPU_NAME
+#define	CPU_NAME	"UNKNOWN"
+#endif
+
+/*
+ * Different cores have different instruction execution timings.
+ * The old/traditional 68000 cores are basically all the same, at 16.
+ * The ColdFire cores vary a little, their values are defined in their
+ * headers. We default to the standard 68000 value here.
+ */
+#ifndef CPU_INSTR_PER_JIFFY
+#define	CPU_INSTR_PER_JIFFY	16
+#endif
+
+void __init setup_arch(char **cmdline_p)
+{
+	memory_start = PAGE_ALIGN(_ramstart);
+	memory_end = _ramend;
+
+	setup_initial_init_mm(_stext, _etext, _edata, NULL);
+
+	config_BSP(&command_line[0], sizeof(command_line));
+
+#if defined(CONFIG_BOOTPARAM)
+	strscpy(&command_line[0], CONFIG_BOOTPARAM_STRING, sizeof(command_line));
+#endif /* CONFIG_BOOTPARAM */
+
+	process_uboot_commandline(&command_line[0], sizeof(command_line));
+
+	pr_info("uClinux with CPU " CPU_NAME "\n");
+
+#ifdef CONFIG_UCDIMM
+	pr_info("uCdimm by Lineo, Inc. <www.lineo.com>\n");
+#endif
+#ifdef CONFIG_M68328
+	pr_info("68328 support D. Jeff Dionne <jeff@uclinux.org>\n");
+	pr_info("68328 support Kenneth Albanowski <kjahds@kjshds.com>\n");
+#endif
+#ifdef CONFIG_M68EZ328
+	pr_info("68EZ328 DragonBallEZ support (C) 1999 Rt-Control, Inc\n");
+#endif
+#ifdef CONFIG_M68VZ328
+	pr_info("M68VZ328 support by Evan Stawnyczy <e@lineo.ca>\n");
+	pr_info("68VZ328 DragonBallVZ support (c) 2001 Lineo, Inc.\n");
+#endif
+#ifdef CONFIG_COLDFIRE
+	pr_info("COLDFIRE port done by Greg Ungerer, gerg@snapgear.com\n");
+#ifdef CONFIG_M5307
+	pr_info("Modified for M5307 by Dave Miller, dmiller@intellistor.com\n");
+#endif
+#ifdef CONFIG_ELITE
+	pr_info("Modified for M5206eLITE by Rob Scott, rscott@mtrob.fdns.net\n");
+#endif
+#endif
+	pr_info("Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne\n");
+
+#if defined( CONFIG_PILOT ) && defined( CONFIG_M68328 )
+	pr_info("68328/Pilot support Bernhard Kuhn <kuhn@lpr.e-technik.tu-muenchen.de>\n");
+	pr_info("TRG SuperPilot FLASH card support <info@trgnet.com>\n");
+#endif
+#if defined( CONFIG_PILOT ) && defined( CONFIG_M68EZ328 )
+	pr_info("PalmV support by Lineo Inc. <jeff@uclinux.com>\n");
+#endif
+#ifdef CONFIG_DRAGEN2
+	pr_info("DragonEngine II board support by Georges Menie\n");
+#endif
+#ifdef CONFIG_M5235EVB
+	pr_info("Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)\n");
+#endif
+
+	pr_debug("KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p BSS=0x%p-0x%p\n",
+		 _stext, _etext, _sdata, _edata, __bss_start, __bss_stop);
+	pr_debug("MEMORY -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx\n ",
+		 __bss_stop, memory_start, memory_start, memory_end);
+
+	memblock_add(_rambase, memory_end - _rambase);
+	memblock_reserve(_rambase, memory_start - _rambase);
+
+	/* Keep a copy of command line */
+	*cmdline_p = &command_line[0];
+	memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
+	boot_command_line[COMMAND_LINE_SIZE-1] = 0;
+
+	/*
+	 * Give all the memory to the bootmap allocator, tell it to put the
+	 * boot mem_map at the start of memory.
+	 */
+	min_low_pfn = PFN_DOWN(memory_start);
+	max_pfn = max_low_pfn = PFN_DOWN(memory_end);
+
+#if defined(CONFIG_UBOOT) && defined(CONFIG_BLK_DEV_INITRD)
+	if ((initrd_start > 0) && (initrd_start < initrd_end) &&
+			(initrd_end < memory_end))
+		memblock_reserve(initrd_start, initrd_end - initrd_start);
+#endif /* if defined(CONFIG_BLK_DEV_INITRD) */
+
+	/*
+	 * Get kmalloc into gear.
+	 */
+	paging_init();
+}
+
+/*
+ *	Get CPU information for use by the procfs.
+ */
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+	char *cpu, *mmu, *fpu;
+	u_long clockfreq;
+
+	cpu = CPU_NAME;
+	mmu = "none";
+	fpu = "none";
+	clockfreq = (loops_per_jiffy * HZ) * CPU_INSTR_PER_JIFFY;
+
+	seq_printf(m, "CPU:\t\t%s\n"
+		      "MMU:\t\t%s\n"
+		      "FPU:\t\t%s\n"
+		      "Clocking:\t%lu.%1luMHz\n"
+		      "BogoMips:\t%lu.%02lu\n"
+		      "Calibration:\t%lu loops\n",
+		      cpu, mmu, fpu,
+		      clockfreq / 1000000,
+		      (clockfreq / 100000) % 10,
+		      (loops_per_jiffy * HZ) / 500000,
+		      ((loops_per_jiffy * HZ) / 5000) % 100,
+		      (loops_per_jiffy * HZ));
+
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	return *pos < NR_CPUS ? ((void *) 0x12345678) : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op = {
+	.start	= c_start,
+	.next	= c_next,
+	.stop	= c_stop,
+	.show	= show_cpuinfo,
+};
+