Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 515 insertions, 0 deletions

diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c
new file mode 100644
index 000000000..b4f7d950c
--- /dev/null
+++ b/arch/mips/kernel/mips-cm.c
@@ -0,0 +1,515 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2013 Imagination Technologies
+ * Author: Paul Burton <paul.burton@mips.com>
+ */
+
+#include <linux/errno.h>
+#include <linux/percpu.h>
+#include <linux/spinlock.h>
+
+#include <asm/mips-cps.h>
+#include <asm/mipsregs.h>
+
+void __iomem *mips_gcr_base;
+void __iomem *mips_cm_l2sync_base;
+int mips_cm_is64;
+
+static char *cm2_tr[8] = {
+	"mem",	"gcr",	"gic",	"mmio",
+	"0x04", "cpc", "0x06", "0x07"
+};
+
+/* CM3 Tag ECC transaction type */
+static char *cm3_tr[16] = {
+	[0x0] = "ReqNoData",
+	[0x1] = "0x1",
+	[0x2] = "ReqWData",
+	[0x3] = "0x3",
+	[0x4] = "IReqNoResp",
+	[0x5] = "IReqWResp",
+	[0x6] = "IReqNoRespDat",
+	[0x7] = "IReqWRespDat",
+	[0x8] = "RespNoData",
+	[0x9] = "RespDataFol",
+	[0xa] = "RespWData",
+	[0xb] = "RespDataOnly",
+	[0xc] = "IRespNoData",
+	[0xd] = "IRespDataFol",
+	[0xe] = "IRespWData",
+	[0xf] = "IRespDataOnly"
+};
+
+static char *cm2_cmd[32] = {
+	[0x00] = "0x00",
+	[0x01] = "Legacy Write",
+	[0x02] = "Legacy Read",
+	[0x03] = "0x03",
+	[0x04] = "0x04",
+	[0x05] = "0x05",
+	[0x06] = "0x06",
+	[0x07] = "0x07",
+	[0x08] = "Coherent Read Own",
+	[0x09] = "Coherent Read Share",
+	[0x0a] = "Coherent Read Discard",
+	[0x0b] = "Coherent Ready Share Always",
+	[0x0c] = "Coherent Upgrade",
+	[0x0d] = "Coherent Writeback",
+	[0x0e] = "0x0e",
+	[0x0f] = "0x0f",
+	[0x10] = "Coherent Copyback",
+	[0x11] = "Coherent Copyback Invalidate",
+	[0x12] = "Coherent Invalidate",
+	[0x13] = "Coherent Write Invalidate",
+	[0x14] = "Coherent Completion Sync",
+	[0x15] = "0x15",
+	[0x16] = "0x16",
+	[0x17] = "0x17",
+	[0x18] = "0x18",
+	[0x19] = "0x19",
+	[0x1a] = "0x1a",
+	[0x1b] = "0x1b",
+	[0x1c] = "0x1c",
+	[0x1d] = "0x1d",
+	[0x1e] = "0x1e",
+	[0x1f] = "0x1f"
+};
+
+/* CM3 Tag ECC command type */
+static char *cm3_cmd[16] = {
+	[0x0] = "Legacy Read",
+	[0x1] = "Legacy Write",
+	[0x2] = "Coherent Read Own",
+	[0x3] = "Coherent Read Share",
+	[0x4] = "Coherent Read Discard",
+	[0x5] = "Coherent Evicted",
+	[0x6] = "Coherent Upgrade",
+	[0x7] = "Coherent Upgrade for Store Conditional",
+	[0x8] = "Coherent Writeback",
+	[0x9] = "Coherent Write Invalidate",
+	[0xa] = "0xa",
+	[0xb] = "0xb",
+	[0xc] = "0xc",
+	[0xd] = "0xd",
+	[0xe] = "0xe",
+	[0xf] = "0xf"
+};
+
+/* CM3 Tag ECC command group */
+static char *cm3_cmd_group[8] = {
+	[0x0] = "Normal",
+	[0x1] = "Registers",
+	[0x2] = "TLB",
+	[0x3] = "0x3",
+	[0x4] = "L1I",
+	[0x5] = "L1D",
+	[0x6] = "L3",
+	[0x7] = "L2"
+};
+
+static char *cm2_core[8] = {
+	"Invalid/OK",	"Invalid/Data",
+	"Shared/OK",	"Shared/Data",
+	"Modified/OK",	"Modified/Data",
+	"Exclusive/OK", "Exclusive/Data"
+};
+
+static char *cm2_l2_type[4] = {
+	[0x0] = "None",
+	[0x1] = "Tag RAM single/double ECC error",
+	[0x2] = "Data RAM single/double ECC error",
+	[0x3] = "WS RAM uncorrectable dirty parity"
+};
+
+static char *cm2_l2_instr[32] = {
+	[0x00] = "L2_NOP",
+	[0x01] = "L2_ERR_CORR",
+	[0x02] = "L2_TAG_INV",
+	[0x03] = "L2_WS_CLEAN",
+	[0x04] = "L2_RD_MDYFY_WR",
+	[0x05] = "L2_WS_MRU",
+	[0x06] = "L2_EVICT_LN2",
+	[0x07] = "0x07",
+	[0x08] = "L2_EVICT",
+	[0x09] = "L2_REFL",
+	[0x0a] = "L2_RD",
+	[0x0b] = "L2_WR",
+	[0x0c] = "L2_EVICT_MRU",
+	[0x0d] = "L2_SYNC",
+	[0x0e] = "L2_REFL_ERR",
+	[0x0f] = "0x0f",
+	[0x10] = "L2_INDX_WB_INV",
+	[0x11] = "L2_INDX_LD_TAG",
+	[0x12] = "L2_INDX_ST_TAG",
+	[0x13] = "L2_INDX_ST_DATA",
+	[0x14] = "L2_INDX_ST_ECC",
+	[0x15] = "0x15",
+	[0x16] = "0x16",
+	[0x17] = "0x17",
+	[0x18] = "L2_FTCH_AND_LCK",
+	[0x19] = "L2_HIT_INV",
+	[0x1a] = "L2_HIT_WB_INV",
+	[0x1b] = "L2_HIT_WB",
+	[0x1c] = "0x1c",
+	[0x1d] = "0x1d",
+	[0x1e] = "0x1e",
+	[0x1f] = "0x1f"
+};
+
+static char *cm2_causes[32] = {
+	"None", "GC_WR_ERR", "GC_RD_ERR", "COH_WR_ERR",
+	"COH_RD_ERR", "MMIO_WR_ERR", "MMIO_RD_ERR", "0x07",
+	"0x08", "0x09", "0x0a", "0x0b",
+	"0x0c", "0x0d", "0x0e", "0x0f",
+	"0x10", "INTVN_WR_ERR", "INTVN_RD_ERR", "0x13",
+	"0x14", "0x15", "0x16", "0x17",
+	"L2_RD_UNCORR", "L2_WR_UNCORR", "L2_CORR", "0x1b",
+	"0x1c", "0x1d", "0x1e", "0x1f"
+};
+
+static char *cm3_causes[32] = {
+	"0x0", "MP_CORRECTABLE_ECC_ERR", "MP_REQUEST_DECODE_ERR",
+	"MP_UNCORRECTABLE_ECC_ERR", "MP_PARITY_ERR", "MP_COHERENCE_ERR",
+	"CMBIU_REQUEST_DECODE_ERR", "CMBIU_PARITY_ERR", "CMBIU_AXI_RESP_ERR",
+	"0x9", "RBI_BUS_ERR", "0xb", "0xc", "0xd", "0xe", "0xf", "0x10",
+	"0x11", "0x12", "0x13", "0x14", "0x15", "0x16", "0x17", "0x18",
+	"0x19", "0x1a", "0x1b", "0x1c", "0x1d", "0x1e", "0x1f"
+};
+
+static DEFINE_PER_CPU_ALIGNED(spinlock_t, cm_core_lock);
+static DEFINE_PER_CPU_ALIGNED(unsigned long, cm_core_lock_flags);
+
+phys_addr_t __mips_cm_phys_base(void)
+{
+	u32 config3 = read_c0_config3();
+	unsigned long cmgcr;
+
+	/* Check the CMGCRBase register is implemented */
+	if (!(config3 & MIPS_CONF3_CMGCR))
+		return 0;
+
+	/* Read the address from CMGCRBase */
+	cmgcr = read_c0_cmgcrbase();
+	return (cmgcr & MIPS_CMGCRF_BASE) << (36 - 32);
+}
+
+phys_addr_t mips_cm_phys_base(void)
+	__attribute__((weak, alias("__mips_cm_phys_base")));
+
+phys_addr_t __mips_cm_l2sync_phys_base(void)
+{
+	u32 base_reg;
+
+	/*
+	 * If the L2-only sync region is already enabled then leave it at it's
+	 * current location.
+	 */
+	base_reg = read_gcr_l2_only_sync_base();
+	if (base_reg & CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN)
+		return base_reg & CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE;
+
+	/* Default to following the CM */
+	return mips_cm_phys_base() + MIPS_CM_GCR_SIZE;
+}
+
+phys_addr_t mips_cm_l2sync_phys_base(void)
+	__attribute__((weak, alias("__mips_cm_l2sync_phys_base")));
+
+static void mips_cm_probe_l2sync(void)
+{
+	unsigned major_rev;
+	phys_addr_t addr;
+
+	/* L2-only sync was introduced with CM major revision 6 */
+	major_rev = FIELD_GET(CM_GCR_REV_MAJOR, read_gcr_rev());
+	if (major_rev < 6)
+		return;
+
+	/* Find a location for the L2 sync region */
+	addr = mips_cm_l2sync_phys_base();
+	BUG_ON((addr & CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE) != addr);
+	if (!addr)
+		return;
+
+	/* Set the region base address & enable it */
+	write_gcr_l2_only_sync_base(addr | CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN);
+
+	/* Map the region */
+	mips_cm_l2sync_base = ioremap(addr, MIPS_CM_L2SYNC_SIZE);
+}
+
+int mips_cm_probe(void)
+{
+	phys_addr_t addr;
+	u32 base_reg;
+	unsigned cpu;
+
+	/*
+	 * No need to probe again if we have already been
+	 * here before.
+	 */
+	if (mips_gcr_base)
+		return 0;
+
+	addr = mips_cm_phys_base();
+	BUG_ON((addr & CM_GCR_BASE_GCRBASE) != addr);
+	if (!addr)
+		return -ENODEV;
+
+	mips_gcr_base = ioremap(addr, MIPS_CM_GCR_SIZE);
+	if (!mips_gcr_base)
+		return -ENXIO;
+
+	/* sanity check that we're looking at a CM */
+	base_reg = read_gcr_base();
+	if ((base_reg & CM_GCR_BASE_GCRBASE) != addr) {
+		pr_err("GCRs appear to have been moved (expected them at 0x%08lx)!\n",
+		       (unsigned long)addr);
+		iounmap(mips_gcr_base);
+		mips_gcr_base = NULL;
+		return -ENODEV;
+	}
+
+	/* set default target to memory */
+	change_gcr_base(CM_GCR_BASE_CMDEFTGT, CM_GCR_BASE_CMDEFTGT_MEM);
+
+	/* disable CM regions */
+	write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR);
+	write_gcr_reg0_mask(CM_GCR_REGn_MASK_ADDRMASK);
+	write_gcr_reg1_base(CM_GCR_REGn_BASE_BASEADDR);
+	write_gcr_reg1_mask(CM_GCR_REGn_MASK_ADDRMASK);
+	write_gcr_reg2_base(CM_GCR_REGn_BASE_BASEADDR);
+	write_gcr_reg2_mask(CM_GCR_REGn_MASK_ADDRMASK);
+	write_gcr_reg3_base(CM_GCR_REGn_BASE_BASEADDR);
+	write_gcr_reg3_mask(CM_GCR_REGn_MASK_ADDRMASK);
+
+	/* probe for an L2-only sync region */
+	mips_cm_probe_l2sync();
+
+	/* determine register width for this CM */
+	mips_cm_is64 = IS_ENABLED(CONFIG_64BIT) && (mips_cm_revision() >= CM_REV_CM3);
+
+	for_each_possible_cpu(cpu)
+		spin_lock_init(&per_cpu(cm_core_lock, cpu));
+
+	return 0;
+}
+
+void mips_cm_lock_other(unsigned int cluster, unsigned int core,
+			unsigned int vp, unsigned int block)
+{
+	unsigned int curr_core, cm_rev;
+	u32 val;
+
+	cm_rev = mips_cm_revision();
+	preempt_disable();
+
+	if (cm_rev >= CM_REV_CM3) {
+		val = FIELD_PREP(CM3_GCR_Cx_OTHER_CORE, core) |
+		      FIELD_PREP(CM3_GCR_Cx_OTHER_VP, vp);
+
+		if (cm_rev >= CM_REV_CM3_5) {
+			val |= CM_GCR_Cx_OTHER_CLUSTER_EN;
+			val |= FIELD_PREP(CM_GCR_Cx_OTHER_CLUSTER, cluster);
+			val |= FIELD_PREP(CM_GCR_Cx_OTHER_BLOCK, block);
+		} else {
+			WARN_ON(cluster != 0);
+			WARN_ON(block != CM_GCR_Cx_OTHER_BLOCK_LOCAL);
+		}
+
+		/*
+		 * We need to disable interrupts in SMP systems in order to
+		 * ensure that we don't interrupt the caller with code which
+		 * may modify the redirect register. We do so here in a
+		 * slightly obscure way by using a spin lock, since this has
+		 * the neat property of also catching any nested uses of
+		 * mips_cm_lock_other() leading to a deadlock or a nice warning
+		 * with lockdep enabled.
+		 */
+		spin_lock_irqsave(this_cpu_ptr(&cm_core_lock),
+				  *this_cpu_ptr(&cm_core_lock_flags));
+	} else {
+		WARN_ON(cluster != 0);
+		WARN_ON(block != CM_GCR_Cx_OTHER_BLOCK_LOCAL);
+
+		/*
+		 * We only have a GCR_CL_OTHER per core in systems with
+		 * CM 2.5 & older, so have to ensure other VP(E)s don't
+		 * race with us.
+		 */
+		curr_core = cpu_core(&current_cpu_data);
+		spin_lock_irqsave(&per_cpu(cm_core_lock, curr_core),
+				  per_cpu(cm_core_lock_flags, curr_core));
+
+		val = FIELD_PREP(CM_GCR_Cx_OTHER_CORENUM, core);
+	}
+
+	write_gcr_cl_other(val);
+
+	/*
+	 * Ensure the core-other region reflects the appropriate core &
+	 * VP before any accesses to it occur.
+	 */
+	mb();
+}
+
+void mips_cm_unlock_other(void)
+{
+	unsigned int curr_core;
+
+	if (mips_cm_revision() < CM_REV_CM3) {
+		curr_core = cpu_core(&current_cpu_data);
+		spin_unlock_irqrestore(&per_cpu(cm_core_lock, curr_core),
+				       per_cpu(cm_core_lock_flags, curr_core));
+	} else {
+		spin_unlock_irqrestore(this_cpu_ptr(&cm_core_lock),
+				       *this_cpu_ptr(&cm_core_lock_flags));
+	}
+
+	preempt_enable();
+}
+
+void mips_cm_error_report(void)
+{
+	u64 cm_error, cm_addr, cm_other;
+	unsigned long revision;
+	int ocause, cause;
+	char buf[256];
+
+	if (!mips_cm_present())
+		return;
+
+	revision = mips_cm_revision();
+	cm_error = read_gcr_error_cause();
+	cm_addr = read_gcr_error_addr();
+	cm_other = read_gcr_error_mult();
+
+	if (revision < CM_REV_CM3) { /* CM2 */
+		cause = FIELD_GET(CM_GCR_ERROR_CAUSE_ERRTYPE, cm_error);
+		ocause = FIELD_GET(CM_GCR_ERROR_MULT_ERR2ND, cm_other);
+
+		if (!cause)
+			return;
+
+		if (cause < 16) {
+			unsigned long cca_bits = (cm_error >> 15) & 7;
+			unsigned long tr_bits = (cm_error >> 12) & 7;
+			unsigned long cmd_bits = (cm_error >> 7) & 0x1f;
+			unsigned long stag_bits = (cm_error >> 3) & 15;
+			unsigned long sport_bits = (cm_error >> 0) & 7;
+
+			snprintf(buf, sizeof(buf),
+				 "CCA=%lu TR=%s MCmd=%s STag=%lu "
+				 "SPort=%lu\n", cca_bits, cm2_tr[tr_bits],
+				 cm2_cmd[cmd_bits], stag_bits, sport_bits);
+		} else if (cause < 24) {
+			/* glob state & sresp together */
+			unsigned long c3_bits = (cm_error >> 18) & 7;
+			unsigned long c2_bits = (cm_error >> 15) & 7;
+			unsigned long c1_bits = (cm_error >> 12) & 7;
+			unsigned long c0_bits = (cm_error >> 9) & 7;
+			unsigned long sc_bit = (cm_error >> 8) & 1;
+			unsigned long cmd_bits = (cm_error >> 3) & 0x1f;
+			unsigned long sport_bits = (cm_error >> 0) & 7;
+
+			snprintf(buf, sizeof(buf),
+				 "C3=%s C2=%s C1=%s C0=%s SC=%s "
+				 "MCmd=%s SPort=%lu\n",
+				 cm2_core[c3_bits], cm2_core[c2_bits],
+				 cm2_core[c1_bits], cm2_core[c0_bits],
+				 sc_bit ? "True" : "False",
+				 cm2_cmd[cmd_bits], sport_bits);
+		} else {
+			unsigned long muc_bit = (cm_error >> 23) & 1;
+			unsigned long ins_bits = (cm_error >> 18) & 0x1f;
+			unsigned long arr_bits = (cm_error >> 16) & 3;
+			unsigned long dw_bits = (cm_error >> 12) & 15;
+			unsigned long way_bits = (cm_error >> 9) & 7;
+			unsigned long mway_bit = (cm_error >> 8) & 1;
+			unsigned long syn_bits = (cm_error >> 0) & 0xFF;
+
+			snprintf(buf, sizeof(buf),
+				 "Type=%s%s Instr=%s DW=%lu Way=%lu "
+				 "MWay=%s Syndrome=0x%02lx",
+				 muc_bit ? "Multi-UC " : "",
+				 cm2_l2_type[arr_bits],
+				 cm2_l2_instr[ins_bits], dw_bits, way_bits,
+				 mway_bit ? "True" : "False", syn_bits);
+		}
+		pr_err("CM_ERROR=%08llx %s <%s>\n", cm_error,
+		       cm2_causes[cause], buf);
+		pr_err("CM_ADDR =%08llx\n", cm_addr);
+		pr_err("CM_OTHER=%08llx %s\n", cm_other, cm2_causes[ocause]);
+	} else { /* CM3 */
+		ulong core_id_bits, vp_id_bits, cmd_bits, cmd_group_bits;
+		ulong cm3_cca_bits, mcp_bits, cm3_tr_bits, sched_bit;
+
+		cause = FIELD_GET(CM3_GCR_ERROR_CAUSE_ERRTYPE, cm_error);
+		ocause = FIELD_GET(CM_GCR_ERROR_MULT_ERR2ND, cm_other);
+
+		if (!cause)
+			return;
+
+		/* Used by cause == {1,2,3} */
+		core_id_bits = (cm_error >> 22) & 0xf;
+		vp_id_bits = (cm_error >> 18) & 0xf;
+		cmd_bits = (cm_error >> 14) & 0xf;
+		cmd_group_bits = (cm_error >> 11) & 0xf;
+		cm3_cca_bits = (cm_error >> 8) & 7;
+		mcp_bits = (cm_error >> 5) & 0xf;
+		cm3_tr_bits = (cm_error >> 1) & 0xf;
+		sched_bit = cm_error & 0x1;
+
+		if (cause == 1 || cause == 3) { /* Tag ECC */
+			unsigned long tag_ecc = (cm_error >> 57) & 0x1;
+			unsigned long tag_way_bits = (cm_error >> 29) & 0xffff;
+			unsigned long dword_bits = (cm_error >> 49) & 0xff;
+			unsigned long data_way_bits = (cm_error >> 45) & 0xf;
+			unsigned long data_sets_bits = (cm_error >> 29) & 0xfff;
+			unsigned long bank_bit = (cm_error >> 28) & 0x1;
+			snprintf(buf, sizeof(buf),
+				 "%s ECC Error: Way=%lu (DWORD=%lu, Sets=%lu)"
+				 "Bank=%lu CoreID=%lu VPID=%lu Command=%s"
+				 "Command Group=%s CCA=%lu MCP=%d"
+				 "Transaction type=%s Scheduler=%lu\n",
+				 tag_ecc ? "TAG" : "DATA",
+				 tag_ecc ? (unsigned long)ffs(tag_way_bits) - 1 :
+				 data_way_bits, bank_bit, dword_bits,
+				 data_sets_bits,
+				 core_id_bits, vp_id_bits,
+				 cm3_cmd[cmd_bits],
+				 cm3_cmd_group[cmd_group_bits],
+				 cm3_cca_bits, 1 << mcp_bits,
+				 cm3_tr[cm3_tr_bits], sched_bit);
+		} else if (cause == 2) {
+			unsigned long data_error_type = (cm_error >> 41) & 0xfff;
+			unsigned long data_decode_cmd = (cm_error >> 37) & 0xf;
+			unsigned long data_decode_group = (cm_error >> 34) & 0x7;
+			unsigned long data_decode_destination_id = (cm_error >> 28) & 0x3f;
+
+			snprintf(buf, sizeof(buf),
+				 "Decode Request Error: Type=%lu, Command=%lu"
+				 "Command Group=%lu Destination ID=%lu"
+				 "CoreID=%lu VPID=%lu Command=%s"
+				 "Command Group=%s CCA=%lu MCP=%d"
+				 "Transaction type=%s Scheduler=%lu\n",
+				 data_error_type, data_decode_cmd,
+				 data_decode_group, data_decode_destination_id,
+				 core_id_bits, vp_id_bits,
+				 cm3_cmd[cmd_bits],
+				 cm3_cmd_group[cmd_group_bits],
+				 cm3_cca_bits, 1 << mcp_bits,
+				 cm3_tr[cm3_tr_bits], sched_bit);
+		} else {
+			buf[0] = 0;
+		}
+
+		pr_err("CM_ERROR=%llx %s <%s>\n", cm_error,
+		       cm3_causes[cause], buf);
+		pr_err("CM_ADDR =%llx\n", cm_addr);
+		pr_err("CM_OTHER=%llx %s\n", cm_other, cm3_causes[ocause]);
+	}
+
+	/* reprime cause register */
+	write_gcr_error_cause(cm_error);
+}