Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

11 files changed, 1344 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig
new file mode 100644
index 000000000..1af81de1c
--- /dev/null
+++ b/arch/powerpc/platforms/82xx/Kconfig
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0
+menuconfig PPC_82xx
+	bool "82xx-based boards (PQ II)"
+	depends on PPC_BOOK3S_32
+
+if PPC_82xx
+
+config MPC8272_ADS
+	bool "Freescale MPC8272 ADS"
+	select DEFAULT_UIMAGE
+	select PQ2ADS
+	select 8272
+	select 8260
+	select FSL_SOC
+	select PQ2_ADS_PCI_PIC if PCI
+	help
+	  This option enables support for the MPC8272 ADS board
+
+config PQ2FADS
+	bool "Freescale PQ2FADS"
+	select DEFAULT_UIMAGE
+	select PQ2ADS
+	select 8260
+	select FSL_SOC
+	select PQ2_ADS_PCI_PIC if PCI
+	help
+	  This option enables support for the PQ2FADS board
+
+config EP8248E
+	bool "Embedded Planet EP8248E (a.k.a. CWH-PPC-8248N-VE)"
+	select 8272
+	select 8260
+	select FSL_SOC
+	select PHYLIB if NETDEVICES
+	select MDIO_BITBANG if PHYLIB
+	help
+	  This enables support for the Embedded Planet EP8248E board.
+
+	  This board is also resold by Freescale as the QUICCStart
+	  MPC8248 Evaluation System and/or the CWH-PPC-8248N-VE.
+
+config MGCOGE
+	bool "Keymile MGCOGE"
+	select 8272
+	select 8260
+	select FSL_SOC
+	help
+	  This enables support for the Keymile MGCOGE board.
+
+endif
+
+config PQ2ADS
+	bool
+
+config 8260
+	bool
+	depends on PPC_BOOK3S_32
+	select CPM2
+	help
+	  The MPC8260 is a typical embedded CPU made by Freescale.  Selecting
+	  this option means that you wish to build a kernel for a machine with
+	  an 8260 class CPU.
+
+config 8272
+	bool
+	select 8260
+	help
+	  The MPC8272 CPM has a different internal dpram setup than other CPM2
+	  devices
+
+config PQ2_ADS_PCI_PIC
+	bool
diff --git a/arch/powerpc/platforms/82xx/Makefile b/arch/powerpc/platforms/82xx/Makefile
new file mode 100644
index 000000000..8d713c601
--- /dev/null
+++ b/arch/powerpc/platforms/82xx/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the PowerPC 82xx linux kernel.
+#
+obj-$(CONFIG_MPC8272_ADS) += mpc8272_ads.o
+obj-$(CONFIG_CPM2) += pq2.o
+obj-$(CONFIG_PQ2_ADS_PCI_PIC) += pq2ads-pci-pic.o
+obj-$(CONFIG_PQ2FADS) += pq2fads.o
+obj-$(CONFIG_EP8248E) += ep8248e.o
+obj-$(CONFIG_MGCOGE) += km82xx.o
diff --git a/arch/powerpc/platforms/82xx/ep8248e.c b/arch/powerpc/platforms/82xx/ep8248e.c
new file mode 100644
index 000000000..28e627f8a
--- /dev/null
+++ b/arch/powerpc/platforms/82xx/ep8248e.c
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Embedded Planet EP8248E support
+ *
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ * Author: Scott Wood <scottwood@freescale.com>
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fsl_devices.h>
+#include <linux/mdio-bitbang.h>
+#include <linux/of_mdio.h>
+#include <linux/slab.h>
+#include <linux/of_platform.h>
+
+#include <asm/io.h>
+#include <asm/cpm2.h>
+#include <asm/udbg.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+#include <asm/mpc8260.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/cpm2_pic.h>
+
+#include "pq2.h"
+
+static u8 __iomem *ep8248e_bcsr;
+static struct device_node *ep8248e_bcsr_node;
+
+#define BCSR7_SCC2_ENABLE 0x10
+
+#define BCSR8_PHY1_ENABLE 0x80
+#define BCSR8_PHY1_POWER  0x40
+#define BCSR8_PHY2_ENABLE 0x20
+#define BCSR8_PHY2_POWER  0x10
+#define BCSR8_MDIO_READ   0x04
+#define BCSR8_MDIO_CLOCK  0x02
+#define BCSR8_MDIO_DATA   0x01
+
+#define BCSR9_USB_ENABLE  0x80
+#define BCSR9_USB_POWER   0x40
+#define BCSR9_USB_HOST    0x20
+#define BCSR9_USB_FULL_SPEED_TARGET 0x10
+
+static void __init ep8248e_pic_init(void)
+{
+	struct device_node *np = of_find_compatible_node(NULL, NULL, "fsl,pq2-pic");
+	if (!np) {
+		printk(KERN_ERR "PIC init: can not find cpm-pic node\n");
+		return;
+	}
+
+	cpm2_pic_init(np);
+	of_node_put(np);
+}
+
+static void ep8248e_set_mdc(struct mdiobb_ctrl *ctrl, int level)
+{
+	if (level)
+		setbits8(&ep8248e_bcsr[8], BCSR8_MDIO_CLOCK);
+	else
+		clrbits8(&ep8248e_bcsr[8], BCSR8_MDIO_CLOCK);
+
+	/* Read back to flush the write. */
+	in_8(&ep8248e_bcsr[8]);
+}
+
+static void ep8248e_set_mdio_dir(struct mdiobb_ctrl *ctrl, int output)
+{
+	if (output)
+		clrbits8(&ep8248e_bcsr[8], BCSR8_MDIO_READ);
+	else
+		setbits8(&ep8248e_bcsr[8], BCSR8_MDIO_READ);
+
+	/* Read back to flush the write. */
+	in_8(&ep8248e_bcsr[8]);
+}
+
+static void ep8248e_set_mdio_data(struct mdiobb_ctrl *ctrl, int data)
+{
+	if (data)
+		setbits8(&ep8248e_bcsr[8], BCSR8_MDIO_DATA);
+	else
+		clrbits8(&ep8248e_bcsr[8], BCSR8_MDIO_DATA);
+
+	/* Read back to flush the write. */
+	in_8(&ep8248e_bcsr[8]);
+}
+
+static int ep8248e_get_mdio_data(struct mdiobb_ctrl *ctrl)
+{
+	return in_8(&ep8248e_bcsr[8]) & BCSR8_MDIO_DATA;
+}
+
+static const struct mdiobb_ops ep8248e_mdio_ops = {
+	.set_mdc = ep8248e_set_mdc,
+	.set_mdio_dir = ep8248e_set_mdio_dir,
+	.set_mdio_data = ep8248e_set_mdio_data,
+	.get_mdio_data = ep8248e_get_mdio_data,
+	.owner = THIS_MODULE,
+};
+
+static struct mdiobb_ctrl ep8248e_mdio_ctrl = {
+	.ops = &ep8248e_mdio_ops,
+};
+
+static int ep8248e_mdio_probe(struct platform_device *ofdev)
+{
+	struct mii_bus *bus;
+	struct resource res;
+	struct device_node *node;
+	int ret;
+
+	node = of_get_parent(ofdev->dev.of_node);
+	of_node_put(node);
+	if (node != ep8248e_bcsr_node)
+		return -ENODEV;
+
+	ret = of_address_to_resource(ofdev->dev.of_node, 0, &res);
+	if (ret)
+		return ret;
+
+	bus = alloc_mdio_bitbang(&ep8248e_mdio_ctrl);
+	if (!bus)
+		return -ENOMEM;
+
+	bus->name = "ep8248e-mdio-bitbang";
+	bus->parent = &ofdev->dev;
+	snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start);
+
+	ret = of_mdiobus_register(bus, ofdev->dev.of_node);
+	if (ret)
+		goto err_free_bus;
+
+	return 0;
+err_free_bus:
+	free_mdio_bitbang(bus);
+	return ret;
+}
+
+static int ep8248e_mdio_remove(struct platform_device *ofdev)
+{
+	BUG();
+	return 0;
+}
+
+static const struct of_device_id ep8248e_mdio_match[] = {
+	{
+		.compatible = "fsl,ep8248e-mdio-bitbang",
+	},
+	{},
+};
+
+static struct platform_driver ep8248e_mdio_driver = {
+	.driver = {
+		.name = "ep8248e-mdio-bitbang",
+		.of_match_table = ep8248e_mdio_match,
+	},
+	.probe = ep8248e_mdio_probe,
+	.remove = ep8248e_mdio_remove,
+};
+
+struct cpm_pin {
+	int port, pin, flags;
+};
+
+static __initdata struct cpm_pin ep8248e_pins[] = {
+	/* SMC1 */
+	{2, 4, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+
+	/* SCC1 */
+	{2, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* FCC1 */
+	{0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{2, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* FCC2 */
+	{1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* I2C */
+	{4, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{4, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+
+	/* USB */
+	{2, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{2, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{3, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{3, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+};
+
+static void __init init_ioports(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ep8248e_pins); i++) {
+		const struct cpm_pin *pin = &ep8248e_pins[i];
+		cpm2_set_pin(pin->port, pin->pin, pin->flags);
+	}
+
+	cpm2_smc_clk_setup(CPM_CLK_SMC1, CPM_BRG7);
+	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK8, CPM_CLK_TX); /* USB */
+	cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK11, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
+}
+
+static void __init ep8248e_setup_arch(void)
+{
+	if (ppc_md.progress)
+		ppc_md.progress("ep8248e_setup_arch()", 0);
+
+	cpm2_reset();
+
+	/* When this is set, snooping CPM DMA from RAM causes
+	 * machine checks.  See erratum SIU18.
+	 */
+	clrbits32(&cpm2_immr->im_siu_conf.siu_82xx.sc_bcr, MPC82XX_BCR_PLDP);
+
+	ep8248e_bcsr_node =
+		of_find_compatible_node(NULL, NULL, "fsl,ep8248e-bcsr");
+	if (!ep8248e_bcsr_node) {
+		printk(KERN_ERR "No bcsr in device tree\n");
+		return;
+	}
+
+	ep8248e_bcsr = of_iomap(ep8248e_bcsr_node, 0);
+	if (!ep8248e_bcsr) {
+		printk(KERN_ERR "Cannot map BCSR registers\n");
+		of_node_put(ep8248e_bcsr_node);
+		ep8248e_bcsr_node = NULL;
+		return;
+	}
+
+	setbits8(&ep8248e_bcsr[7], BCSR7_SCC2_ENABLE);
+	setbits8(&ep8248e_bcsr[8], BCSR8_PHY1_ENABLE | BCSR8_PHY1_POWER |
+	                           BCSR8_PHY2_ENABLE | BCSR8_PHY2_POWER);
+
+	init_ioports();
+
+	if (ppc_md.progress)
+		ppc_md.progress("ep8248e_setup_arch(), finish", 0);
+}
+
+static const struct of_device_id of_bus_ids[] __initconst = {
+	{ .compatible = "simple-bus", },
+	{ .compatible = "fsl,ep8248e-bcsr", },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+	if (IS_ENABLED(CONFIG_MDIO_BITBANG))
+		platform_driver_register(&ep8248e_mdio_driver);
+
+	return 0;
+}
+machine_device_initcall(ep8248e, declare_of_platform_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init ep8248e_probe(void)
+{
+	return of_machine_is_compatible("fsl,ep8248e");
+}
+
+define_machine(ep8248e)
+{
+	.name = "Embedded Planet EP8248E",
+	.probe = ep8248e_probe,
+	.setup_arch = ep8248e_setup_arch,
+	.init_IRQ = ep8248e_pic_init,
+	.get_irq = cpm2_get_irq,
+	.calibrate_decr = generic_calibrate_decr,
+	.restart = pq2_restart,
+	.progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/82xx/km82xx.c b/arch/powerpc/platforms/82xx/km82xx.c
new file mode 100644
index 000000000..1c8bbf425
--- /dev/null
+++ b/arch/powerpc/platforms/82xx/km82xx.c
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Keymile km82xx support
+ * Copyright 2008-2011 DENX Software Engineering GmbH
+ * Author: Heiko Schocher <hs@denx.de>
+ *
+ * based on code from:
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ * Author: Scott Wood <scottwood@freescale.com>
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fsl_devices.h>
+#include <linux/of_platform.h>
+
+#include <linux/io.h>
+#include <asm/cpm2.h>
+#include <asm/udbg.h>
+#include <asm/machdep.h>
+#include <linux/time.h>
+#include <asm/mpc8260.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/cpm2_pic.h>
+
+#include "pq2.h"
+
+static void __init km82xx_pic_init(void)
+{
+	struct device_node *np = of_find_compatible_node(NULL, NULL,
+							"fsl,pq2-pic");
+	if (!np) {
+		pr_err("PIC init: can not find cpm-pic node\n");
+		return;
+	}
+
+	cpm2_pic_init(np);
+	of_node_put(np);
+}
+
+struct cpm_pin {
+	int port, pin, flags;
+};
+
+static __initdata struct cpm_pin km82xx_pins[] = {
+	/* SMC1 */
+	{2, 4, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+
+	/* SMC2 */
+	{0, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 9, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+
+	/* SCC1 */
+	{2, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+
+	/* SCC4 */
+	{2, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2,  9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2,  8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{3, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{3, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+
+	/* FCC1 */
+	{0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+
+	{2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 23, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* FCC2 */
+	{1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+
+	{2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* MDC */
+	{0, 13, CPM_PIN_OUTPUT | CPM_PIN_GPIO},
+
+#if defined(CONFIG_I2C_CPM)
+	/* I2C */
+	{3, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
+	{3, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
+#endif
+
+	/* USB */
+	{0, 10, CPM_PIN_OUTPUT | CPM_PIN_GPIO},    /* FULL_SPEED */
+	{0, 11, CPM_PIN_OUTPUT | CPM_PIN_GPIO},    /*/SLAVE */
+	{2, 10, CPM_PIN_INPUT  | CPM_PIN_PRIMARY}, /* RXN */
+	{2, 11, CPM_PIN_INPUT  | CPM_PIN_PRIMARY}, /* RXP */
+	{2, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, /* /OE */
+	{2, 27, CPM_PIN_INPUT  | CPM_PIN_PRIMARY}, /* RXCLK */
+	{3, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, /* TXP */
+	{3, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, /* TXN */
+	{3, 25, CPM_PIN_INPUT  | CPM_PIN_PRIMARY}, /* RXD */
+
+	/* SPI */
+	{3, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY},/* SPI_MISO PD16 */
+	{3, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY},/* SPI_MOSI PD17 */
+	{3, 18, CPM_PIN_INPUT | CPM_PIN_SECONDARY},/* SPI_CLK PD18 */
+};
+
+static void __init init_ioports(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(km82xx_pins); i++) {
+		const struct cpm_pin *pin = &km82xx_pins[i];
+		cpm2_set_pin(pin->port, pin->pin, pin->flags);
+	}
+
+	cpm2_smc_clk_setup(CPM_CLK_SMC2, CPM_BRG8);
+	cpm2_smc_clk_setup(CPM_CLK_SMC1, CPM_BRG7);
+	cpm2_clk_setup(CPM_CLK_SCC1, CPM_CLK11, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_SCC1, CPM_CLK11, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK5, CPM_CLK_RTX);
+	cpm2_clk_setup(CPM_CLK_SCC4, CPM_CLK7, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_SCC4, CPM_CLK8, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK9,  CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
+
+	/* Force USB FULL SPEED bit to '1' */
+	setbits32(&cpm2_immr->im_ioport.iop_pdata, 1 << (31 - 10));
+	/* clear USB_SLAVE */
+	clrbits32(&cpm2_immr->im_ioport.iop_pdata, 1 << (31 - 11));
+}
+
+static void __init km82xx_setup_arch(void)
+{
+	if (ppc_md.progress)
+		ppc_md.progress("km82xx_setup_arch()", 0);
+
+	cpm2_reset();
+
+	/* When this is set, snooping CPM DMA from RAM causes
+	 * machine checks.  See erratum SIU18.
+	 */
+	clrbits32(&cpm2_immr->im_siu_conf.siu_82xx.sc_bcr, MPC82XX_BCR_PLDP);
+
+	init_ioports();
+
+	if (ppc_md.progress)
+		ppc_md.progress("km82xx_setup_arch(), finish", 0);
+}
+
+static const struct of_device_id of_bus_ids[] __initconst = {
+	{ .compatible = "simple-bus", },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+	return 0;
+}
+machine_device_initcall(km82xx, declare_of_platform_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init km82xx_probe(void)
+{
+	return of_machine_is_compatible("keymile,km82xx");
+}
+
+define_machine(km82xx)
+{
+	.name = "Keymile km82xx",
+	.probe = km82xx_probe,
+	.setup_arch = km82xx_setup_arch,
+	.init_IRQ = km82xx_pic_init,
+	.get_irq = cpm2_get_irq,
+	.calibrate_decr = generic_calibrate_decr,
+	.restart = pq2_restart,
+	.progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/82xx/m82xx_pci.h b/arch/powerpc/platforms/82xx/m82xx_pci.h
new file mode 100644
index 000000000..d07c4d760
--- /dev/null
+++ b/arch/powerpc/platforms/82xx/m82xx_pci.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef _PPC_KERNEL_M82XX_PCI_H
+#define _PPC_KERNEL_M82XX_PCI_H
+
+/*
+ */
+
+#define SIU_INT_IRQ1   ((uint)0x13 + CPM_IRQ_OFFSET)
+
+#ifndef _IO_BASE
+#define _IO_BASE isa_io_base
+#endif
+
+#endif				/* _PPC_KERNEL_M8260_PCI_H */
diff --git a/arch/powerpc/platforms/82xx/mpc8272_ads.c b/arch/powerpc/platforms/82xx/mpc8272_ads.c
new file mode 100644
index 000000000..0b5b9dec1
--- /dev/null
+++ b/arch/powerpc/platforms/82xx/mpc8272_ads.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC8272 ADS board support
+ *
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Based on code by Vitaly Bordug <vbordug@ru.mvista.com>
+ * Copyright (c) 2006 MontaVista Software, Inc.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fsl_devices.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+
+#include <asm/cpm2.h>
+#include <asm/udbg.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+
+#include <platforms/82xx/pq2.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/cpm2_pic.h>
+
+#include "pq2.h"
+
+static void __init mpc8272_ads_pic_init(void)
+{
+	struct device_node *np = of_find_compatible_node(NULL, NULL,
+	                                                 "fsl,cpm2-pic");
+	if (!np) {
+		printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
+		return;
+	}
+
+	cpm2_pic_init(np);
+	of_node_put(np);
+
+	/* Initialize stuff for the 82xx CPLD IC and install demux  */
+	pq2ads_pci_init_irq();
+}
+
+struct cpm_pin {
+	int port, pin, flags;
+};
+
+static struct cpm_pin mpc8272_ads_pins[] = {
+	/* SCC1 */
+	{3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* SCC4 */
+	{3, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{3, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* FCC1 */
+	{0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{2, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* FCC2 */
+	{1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{2, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* I2C */
+	{3, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
+	{3, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
+
+	/* USB */
+	{2, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{2, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{3, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{3, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+};
+
+static void __init init_ioports(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mpc8272_ads_pins); i++) {
+		struct cpm_pin *pin = &mpc8272_ads_pins[i];
+		cpm2_set_pin(pin->port, pin->pin, pin->flags);
+	}
+
+	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK8, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK8, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_SCC4, CPM_BRG4, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_SCC4, CPM_BRG4, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK11, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK15, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK16, CPM_CLK_TX);
+}
+
+static void __init mpc8272_ads_setup_arch(void)
+{
+	struct device_node *np;
+	__be32 __iomem *bcsr;
+
+	if (ppc_md.progress)
+		ppc_md.progress("mpc8272_ads_setup_arch()", 0);
+
+	cpm2_reset();
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc8272ads-bcsr");
+	if (!np) {
+		printk(KERN_ERR "No bcsr in device tree\n");
+		return;
+	}
+
+	bcsr = of_iomap(np, 0);
+	of_node_put(np);
+	if (!bcsr) {
+		printk(KERN_ERR "Cannot map BCSR registers\n");
+		return;
+	}
+
+#define BCSR1_FETHIEN		0x08000000
+#define BCSR1_FETH_RST		0x04000000
+#define BCSR1_RS232_EN1		0x02000000
+#define BCSR1_RS232_EN2		0x01000000
+#define BCSR3_USB_nEN		0x80000000
+#define BCSR3_FETHIEN2		0x10000000
+#define BCSR3_FETH2_RST		0x08000000
+
+	clrbits32(&bcsr[1], BCSR1_RS232_EN1 | BCSR1_RS232_EN2 | BCSR1_FETHIEN);
+	setbits32(&bcsr[1], BCSR1_FETH_RST);
+
+	clrbits32(&bcsr[3], BCSR3_FETHIEN2);
+	setbits32(&bcsr[3], BCSR3_FETH2_RST);
+
+	clrbits32(&bcsr[3], BCSR3_USB_nEN);
+
+	iounmap(bcsr);
+
+	init_ioports();
+
+	if (ppc_md.progress)
+		ppc_md.progress("mpc8272_ads_setup_arch(), finish", 0);
+}
+
+static const struct of_device_id of_bus_ids[] __initconst = {
+	{ .name = "soc", },
+	{ .name = "cpm", },
+	{ .name = "localbus", },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	/* Publish the QE devices */
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+	return 0;
+}
+machine_device_initcall(mpc8272_ads, declare_of_platform_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mpc8272_ads_probe(void)
+{
+	return of_machine_is_compatible("fsl,mpc8272ads");
+}
+
+define_machine(mpc8272_ads)
+{
+	.name = "Freescale MPC8272 ADS",
+	.probe = mpc8272_ads_probe,
+	.setup_arch = mpc8272_ads_setup_arch,
+	.discover_phbs = pq2_init_pci,
+	.init_IRQ = mpc8272_ads_pic_init,
+	.get_irq = cpm2_get_irq,
+	.calibrate_decr = generic_calibrate_decr,
+	.restart = pq2_restart,
+	.progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/82xx/pq2.c b/arch/powerpc/platforms/82xx/pq2.c
new file mode 100644
index 000000000..3b5cb39a5
--- /dev/null
+++ b/arch/powerpc/platforms/82xx/pq2.c
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Common PowerQUICC II code.
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ * Copyright (c) 2007 Freescale Semiconductor
+ *
+ * Based on code by Vitaly Bordug <vbordug@ru.mvista.com>
+ * pq2_restart fix by Wade Farnsworth <wfarnsworth@mvista.com>
+ * Copyright (c) 2006 MontaVista Software, Inc.
+ */
+
+#include <linux/kprobes.h>
+
+#include <asm/cpm2.h>
+#include <asm/io.h>
+#include <asm/pci-bridge.h>
+
+#include <platforms/82xx/pq2.h>
+
+#define RMR_CSRE 0x00000001
+
+void __noreturn pq2_restart(char *cmd)
+{
+	local_irq_disable();
+	setbits32(&cpm2_immr->im_clkrst.car_rmr, RMR_CSRE);
+
+	/* Clear the ME,EE,IR & DR bits in MSR to cause checkstop */
+	mtmsr(mfmsr() & ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR));
+	in_8(&cpm2_immr->im_clkrst.res[0]);
+
+	panic("Restart failed\n");
+}
+NOKPROBE_SYMBOL(pq2_restart)
+
+#ifdef CONFIG_PCI
+static int pq2_pci_exclude_device(struct pci_controller *hose,
+                                  u_char bus, u8 devfn)
+{
+	if (bus == 0 && PCI_SLOT(devfn) == 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	else
+		return PCIBIOS_SUCCESSFUL;
+}
+
+static void __init pq2_pci_add_bridge(struct device_node *np)
+{
+	struct pci_controller *hose;
+	struct resource r;
+
+	if (of_address_to_resource(np, 0, &r) || r.end - r.start < 0x10b)
+		goto err;
+
+	pci_add_flags(PCI_REASSIGN_ALL_BUS);
+
+	hose = pcibios_alloc_controller(np);
+	if (!hose)
+		return;
+
+	hose->dn = np;
+
+	setup_indirect_pci(hose, r.start + 0x100, r.start + 0x104, 0);
+	pci_process_bridge_OF_ranges(hose, np, 1);
+
+	return;
+
+err:
+	printk(KERN_ERR "No valid PCI reg property in device tree\n");
+}
+
+void __init pq2_init_pci(void)
+{
+	struct device_node *np;
+
+	ppc_md.pci_exclude_device = pq2_pci_exclude_device;
+
+	for_each_compatible_node(np, NULL, "fsl,pq2-pci")
+		pq2_pci_add_bridge(np);
+}
+#endif
diff --git a/arch/powerpc/platforms/82xx/pq2.h b/arch/powerpc/platforms/82xx/pq2.h
new file mode 100644
index 000000000..902ef0bd4
--- /dev/null
+++ b/arch/powerpc/platforms/82xx/pq2.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _PQ2_H
+#define _PQ2_H
+
+void __noreturn pq2_restart(char *cmd);
+
+#ifdef CONFIG_PCI
+int pq2ads_pci_init_irq(void);
+void pq2_init_pci(void);
+#else
+static inline int pq2ads_pci_init_irq(void)
+{
+	return 0;
+}
+
+static inline void pq2_init_pci(void)
+{
+}
+#endif
+
+#endif
diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
new file mode 100644
index 000000000..cf3210042
--- /dev/null
+++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PQ2 ADS-style PCI interrupt controller
+ *
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Loosely based on mpc82xx ADS support by Vitaly Bordug <vbordug@ru.mvista.com>
+ * Copyright (c) 2006 MontaVista Software, Inc.
+ */
+
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/irq.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/of_irq.h>
+
+#include <asm/io.h>
+#include <asm/cpm2.h>
+
+#include "pq2.h"
+
+static DEFINE_RAW_SPINLOCK(pci_pic_lock);
+
+struct pq2ads_pci_pic {
+	struct device_node *node;
+	struct irq_domain *host;
+
+	struct {
+		u32 stat;
+		u32 mask;
+	} __iomem *regs;
+};
+
+#define NUM_IRQS 32
+
+static void pq2ads_pci_mask_irq(struct irq_data *d)
+{
+	struct pq2ads_pci_pic *priv = irq_data_get_irq_chip_data(d);
+	int irq = NUM_IRQS - irqd_to_hwirq(d) - 1;
+
+	if (irq != -1) {
+		unsigned long flags;
+		raw_spin_lock_irqsave(&pci_pic_lock, flags);
+
+		setbits32(&priv->regs->mask, 1 << irq);
+		mb();
+
+		raw_spin_unlock_irqrestore(&pci_pic_lock, flags);
+	}
+}
+
+static void pq2ads_pci_unmask_irq(struct irq_data *d)
+{
+	struct pq2ads_pci_pic *priv = irq_data_get_irq_chip_data(d);
+	int irq = NUM_IRQS - irqd_to_hwirq(d) - 1;
+
+	if (irq != -1) {
+		unsigned long flags;
+
+		raw_spin_lock_irqsave(&pci_pic_lock, flags);
+		clrbits32(&priv->regs->mask, 1 << irq);
+		raw_spin_unlock_irqrestore(&pci_pic_lock, flags);
+	}
+}
+
+static struct irq_chip pq2ads_pci_ic = {
+	.name = "PQ2 ADS PCI",
+	.irq_mask = pq2ads_pci_mask_irq,
+	.irq_mask_ack = pq2ads_pci_mask_irq,
+	.irq_ack = pq2ads_pci_mask_irq,
+	.irq_unmask = pq2ads_pci_unmask_irq,
+	.irq_enable = pq2ads_pci_unmask_irq,
+	.irq_disable = pq2ads_pci_mask_irq
+};
+
+static void pq2ads_pci_irq_demux(struct irq_desc *desc)
+{
+	struct pq2ads_pci_pic *priv = irq_desc_get_handler_data(desc);
+	u32 stat, mask, pend;
+	int bit;
+
+	for (;;) {
+		stat = in_be32(&priv->regs->stat);
+		mask = in_be32(&priv->regs->mask);
+
+		pend = stat & ~mask;
+
+		if (!pend)
+			break;
+
+		for (bit = 0; pend != 0; ++bit, pend <<= 1) {
+			if (pend & 0x80000000)
+				generic_handle_domain_irq(priv->host, bit);
+		}
+	}
+}
+
+static int pci_pic_host_map(struct irq_domain *h, unsigned int virq,
+			    irq_hw_number_t hw)
+{
+	irq_set_status_flags(virq, IRQ_LEVEL);
+	irq_set_chip_data(virq, h->host_data);
+	irq_set_chip_and_handler(virq, &pq2ads_pci_ic, handle_level_irq);
+	return 0;
+}
+
+static const struct irq_domain_ops pci_pic_host_ops = {
+	.map = pci_pic_host_map,
+};
+
+int __init pq2ads_pci_init_irq(void)
+{
+	struct pq2ads_pci_pic *priv;
+	struct irq_domain *host;
+	struct device_node *np;
+	int ret = -ENODEV;
+	int irq;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,pq2ads-pci-pic");
+	if (!np) {
+		printk(KERN_ERR "No pci pic node in device tree.\n");
+		goto out;
+	}
+
+	irq = irq_of_parse_and_map(np, 0);
+	if (!irq) {
+		printk(KERN_ERR "No interrupt in pci pic node.\n");
+		goto out_put_node;
+	}
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		ret = -ENOMEM;
+		goto out_unmap_irq;
+	}
+
+	/* PCI interrupt controller registers: status and mask */
+	priv->regs = of_iomap(np, 0);
+	if (!priv->regs) {
+		printk(KERN_ERR "Cannot map PCI PIC registers.\n");
+		goto out_free_kmalloc;
+	}
+
+	/* mask all PCI interrupts */
+	out_be32(&priv->regs->mask, ~0);
+	mb();
+
+	host = irq_domain_add_linear(np, NUM_IRQS, &pci_pic_host_ops, priv);
+	if (!host) {
+		ret = -ENOMEM;
+		goto out_unmap_regs;
+	}
+
+	priv->host = host;
+	irq_set_handler_data(irq, priv);
+	irq_set_chained_handler(irq, pq2ads_pci_irq_demux);
+	ret = 0;
+	goto out_put_node;
+
+out_unmap_regs:
+	iounmap(priv->regs);
+out_free_kmalloc:
+	kfree(priv);
+out_unmap_irq:
+	irq_dispose_mapping(irq);
+out_put_node:
+	of_node_put(np);
+out:
+	return ret;
+}
diff --git a/arch/powerpc/platforms/82xx/pq2ads.h b/arch/powerpc/platforms/82xx/pq2ads.h
new file mode 100644
index 000000000..9d0bf7449
--- /dev/null
+++ b/arch/powerpc/platforms/82xx/pq2ads.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * PQ2/mpc8260 board-specific stuff
+ *
+ * A collection of structures, addresses, and values associated with
+ * the Freescale MPC8260ADS/MPC8266ADS-PCI boards.
+ * Copied from the RPX-Classic and SBS8260 stuff.
+ *
+ * Author: Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * Originally written by Dan Malek for Motorola MPC8260 family
+ *
+ * Copyright (c) 2001 Dan Malek <dan@embeddedalley.com>
+ * Copyright (c) 2006 MontaVista Software, Inc.
+ */
+
+#ifdef __KERNEL__
+#ifndef __MACH_ADS8260_DEFS
+#define __MACH_ADS8260_DEFS
+
+#include <linux/seq_file.h>
+
+/* The ADS8260 has 16, 32-bit wide control/status registers, accessed
+ * only on word boundaries.
+ * Not all are used (yet), or are interesting to us (yet).
+ */
+
+/* Things of interest in the CSR.
+ */
+#define BCSR0_LED0		((uint)0x02000000)      /* 0 == on */
+#define BCSR0_LED1		((uint)0x01000000)      /* 0 == on */
+#define BCSR1_FETHIEN		((uint)0x08000000)      /* 0 == enable*/
+#define BCSR1_FETH_RST		((uint)0x04000000)      /* 0 == reset */
+#define BCSR1_RS232_EN1		((uint)0x02000000)      /* 0 ==enable */
+#define BCSR1_RS232_EN2		((uint)0x01000000)      /* 0 ==enable */
+#define BCSR3_FETHIEN2		((uint)0x10000000)      /* 0 == enable*/
+#define BCSR3_FETH2_RST		((uint)0x80000000)      /* 0 == reset */
+
+#endif /* __MACH_ADS8260_DEFS */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/platforms/82xx/pq2fads.c b/arch/powerpc/platforms/82xx/pq2fads.c
new file mode 100644
index 000000000..ac9113d52
--- /dev/null
+++ b/arch/powerpc/platforms/82xx/pq2fads.c
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PQ2FADS board support
+ *
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Loosely based on mp82xx ADS support by Vitaly Bordug <vbordug@ru.mvista.com>
+ * Copyright (c) 2006 MontaVista Software, Inc.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fsl_devices.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+
+#include <asm/io.h>
+#include <asm/cpm2.h>
+#include <asm/udbg.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/cpm2_pic.h>
+
+#include "pq2ads.h"
+#include "pq2.h"
+
+static void __init pq2fads_pic_init(void)
+{
+	struct device_node *np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
+	if (!np) {
+		printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
+		return;
+	}
+
+	cpm2_pic_init(np);
+	of_node_put(np);
+
+	/* Initialize stuff for the 82xx CPLD IC and install demux  */
+	pq2ads_pci_init_irq();
+}
+
+struct cpm_pin {
+	int port, pin, flags;
+};
+
+static struct cpm_pin pq2fads_pins[] = {
+	/* SCC1 */
+	{3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* SCC2 */
+	{3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* FCC2 */
+	{1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* FCC3 */
+	{1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+};
+
+static void __init init_ioports(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pq2fads_pins); i++) {
+		struct cpm_pin *pin = &pq2fads_pins[i];
+		cpm2_set_pin(pin->port, pin->pin, pin->flags);
+	}
+
+	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX);
+}
+
+static void __init pq2fads_setup_arch(void)
+{
+	struct device_node *np;
+	__be32 __iomem *bcsr;
+
+	if (ppc_md.progress)
+		ppc_md.progress("pq2fads_setup_arch()", 0);
+
+	cpm2_reset();
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,pq2fads-bcsr");
+	if (!np) {
+		printk(KERN_ERR "No fsl,pq2fads-bcsr in device tree\n");
+		return;
+	}
+
+	bcsr = of_iomap(np, 0);
+	of_node_put(np);
+	if (!bcsr) {
+		printk(KERN_ERR "Cannot map BCSR registers\n");
+		return;
+	}
+
+	/* Enable the serial and ethernet ports */
+
+	clrbits32(&bcsr[1], BCSR1_RS232_EN1 | BCSR1_RS232_EN2 | BCSR1_FETHIEN);
+	setbits32(&bcsr[1], BCSR1_FETH_RST);
+
+	clrbits32(&bcsr[3], BCSR3_FETHIEN2);
+	setbits32(&bcsr[3], BCSR3_FETH2_RST);
+
+	iounmap(bcsr);
+
+	init_ioports();
+
+	/* Enable external IRQs */
+	clrbits32(&cpm2_immr->im_siu_conf.siu_82xx.sc_siumcr, 0x0c000000);
+
+	if (ppc_md.progress)
+		ppc_md.progress("pq2fads_setup_arch(), finish", 0);
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init pq2fads_probe(void)
+{
+	return of_machine_is_compatible("fsl,pq2fads");
+}
+
+static const struct of_device_id of_bus_ids[] __initconst = {
+	{ .name = "soc", },
+	{ .name = "cpm", },
+	{ .name = "localbus", },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	/* Publish the QE devices */
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+	return 0;
+}
+machine_device_initcall(pq2fads, declare_of_platform_devices);
+
+define_machine(pq2fads)
+{
+	.name = "Freescale PQ2FADS",
+	.probe = pq2fads_probe,
+	.setup_arch = pq2fads_setup_arch,
+	.discover_phbs = pq2_init_pci,
+	.init_IRQ = pq2fads_pic_init,
+	.get_irq = cpm2_get_irq,
+	.calibrate_decr = generic_calibrate_decr,
+	.restart = pq2_restart,
+	.progress = udbg_progress,
+};