Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 162 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/pasemi/msi.c b/arch/powerpc/platforms/pasemi/msi.c
new file mode 100644
index 000000000..166c97fff
--- /dev/null
+++ b/arch/powerpc/platforms/pasemi/msi.c
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2007, Olof Johansson, PA Semi
+ *
+ * Based on arch/powerpc/sysdev/mpic_u3msi.c:
+ *
+ * Copyright 2006, Segher Boessenkool, IBM Corporation.
+ * Copyright 2006-2007, Michael Ellerman, IBM Corporation.
+ */
+
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/msi.h>
+#include <asm/mpic.h>
+#include <asm/hw_irq.h>
+#include <asm/ppc-pci.h>
+#include <asm/msi_bitmap.h>
+
+#include <sysdev/mpic.h>
+
+/* Allocate 16 interrupts per device, to give an alignment of 16,
+ * since that's the size of the grouping w.r.t. affinity. If someone
+ * needs more than 32 MSI's down the road we'll have to rethink this,
+ * but it should be OK for now.
+ */
+#define ALLOC_CHUNK 16
+
+#define PASEMI_MSI_ADDR 0xfc080000
+
+/* A bit ugly, can we get this from the pci_dev somehow? */
+static struct mpic *msi_mpic;
+
+
+static void mpic_pasemi_msi_mask_irq(struct irq_data *data)
+{
+	pr_debug("mpic_pasemi_msi_mask_irq %d\n", data->irq);
+	pci_msi_mask_irq(data);
+	mpic_mask_irq(data);
+}
+
+static void mpic_pasemi_msi_unmask_irq(struct irq_data *data)
+{
+	pr_debug("mpic_pasemi_msi_unmask_irq %d\n", data->irq);
+	mpic_unmask_irq(data);
+	pci_msi_unmask_irq(data);
+}
+
+static struct irq_chip mpic_pasemi_msi_chip = {
+	.irq_shutdown		= mpic_pasemi_msi_mask_irq,
+	.irq_mask		= mpic_pasemi_msi_mask_irq,
+	.irq_unmask		= mpic_pasemi_msi_unmask_irq,
+	.irq_eoi		= mpic_end_irq,
+	.irq_set_type		= mpic_set_irq_type,
+	.irq_set_affinity	= mpic_set_affinity,
+	.name			= "PASEMI-MSI",
+};
+
+static void pasemi_msi_teardown_msi_irqs(struct pci_dev *pdev)
+{
+	struct msi_desc *entry;
+	irq_hw_number_t hwirq;
+
+	pr_debug("pasemi_msi_teardown_msi_irqs, pdev %p\n", pdev);
+
+	msi_for_each_desc(entry, &pdev->dev, MSI_DESC_ASSOCIATED) {
+		hwirq = virq_to_hw(entry->irq);
+		irq_set_msi_desc(entry->irq, NULL);
+		irq_dispose_mapping(entry->irq);
+		entry->irq = 0;
+		msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap, hwirq, ALLOC_CHUNK);
+	}
+}
+
+static int pasemi_msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
+{
+	unsigned int virq;
+	struct msi_desc *entry;
+	struct msi_msg msg;
+	int hwirq;
+
+	if (type == PCI_CAP_ID_MSIX)
+		pr_debug("pasemi_msi: MSI-X untested, trying anyway\n");
+	pr_debug("pasemi_msi_setup_msi_irqs, pdev %p nvec %d type %d\n",
+		 pdev, nvec, type);
+
+	msg.address_hi = 0;
+	msg.address_lo = PASEMI_MSI_ADDR;
+
+	msi_for_each_desc(entry, &pdev->dev, MSI_DESC_NOTASSOCIATED) {
+		/* Allocate 16 interrupts for now, since that's the grouping for
+		 * affinity. This can be changed later if it turns out 32 is too
+		 * few MSIs for someone, but restrictions will apply to how the
+		 * sources can be changed independently.
+		 */
+		hwirq = msi_bitmap_alloc_hwirqs(&msi_mpic->msi_bitmap,
+						ALLOC_CHUNK);
+		if (hwirq < 0) {
+			pr_debug("pasemi_msi: failed allocating hwirq\n");
+			return hwirq;
+		}
+
+		virq = irq_create_mapping(msi_mpic->irqhost, hwirq);
+		if (!virq) {
+			pr_debug("pasemi_msi: failed mapping hwirq 0x%x\n",
+				  hwirq);
+			msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap, hwirq,
+					       ALLOC_CHUNK);
+			return -ENOSPC;
+		}
+
+		/* Vector on MSI is really an offset, the hardware adds
+		 * it to the value written at the magic address. So set
+		 * it to 0 to remain sane.
+		 */
+		mpic_set_vector(virq, 0);
+
+		irq_set_msi_desc(virq, entry);
+		irq_set_chip(virq, &mpic_pasemi_msi_chip);
+		irq_set_irq_type(virq, IRQ_TYPE_EDGE_RISING);
+
+		pr_debug("pasemi_msi: allocated virq 0x%x (hw 0x%x) " \
+			 "addr 0x%x\n", virq, hwirq, msg.address_lo);
+
+		/* Likewise, the device writes [0...511] into the target
+		 * register to generate MSI [512...1023]
+		 */
+		msg.data = hwirq-0x200;
+		pci_write_msi_msg(virq, &msg);
+	}
+
+	return 0;
+}
+
+int __init mpic_pasemi_msi_init(struct mpic *mpic)
+{
+	int rc;
+	struct pci_controller *phb;
+	struct device_node *of_node;
+
+	of_node = irq_domain_get_of_node(mpic->irqhost);
+	if (!of_node ||
+	    !of_device_is_compatible(of_node,
+				     "pasemi,pwrficient-openpic"))
+		return -ENODEV;
+
+	rc = mpic_msi_init_allocator(mpic);
+	if (rc) {
+		pr_debug("pasemi_msi: Error allocating bitmap!\n");
+		return rc;
+	}
+
+	pr_debug("pasemi_msi: Registering PA Semi MPIC MSI callbacks\n");
+
+	msi_mpic = mpic;
+	list_for_each_entry(phb, &hose_list, list_node) {
+		WARN_ON(phb->controller_ops.setup_msi_irqs);
+		phb->controller_ops.setup_msi_irqs = pasemi_msi_setup_msi_irqs;
+		phb->controller_ops.teardown_msi_irqs = pasemi_msi_teardown_msi_irqs;
+	}
+
+	return 0;
+}