Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

7 files changed, 915 insertions, 0 deletions

diff --git a/arch/sh/kernel/cpu/sh2/Makefile b/arch/sh/kernel/cpu/sh2/Makefile
new file mode 100644
index 000000000..214c3a5b1
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the Linux/SuperH SH-2 backends.
+#
+
+obj-y	:= ex.o probe.o entry.o
+
+obj-$(CONFIG_CPU_SUBTYPE_SH7619) += setup-sh7619.o clock-sh7619.o
+
+# SMP setup
+smp-$(CONFIG_CPU_J2)			:= smp-j2.o
+obj-$(CONFIG_SMP)			+= $(smp-y)
diff --git a/arch/sh/kernel/cpu/sh2/clock-sh7619.c b/arch/sh/kernel/cpu/sh2/clock-sh7619.c
new file mode 100644
index 000000000..d66d194c7
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2/clock-sh7619.c
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/sh/kernel/cpu/sh2/clock-sh7619.c
+ *
+ * SH7619 support for the clock framework
+ *
+ *  Copyright (C) 2006  Yoshinori Sato
+ *
+ * Based on clock-sh4.c
+ *  Copyright (C) 2005  Paul Mundt
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/processor.h>
+
+static const int pll1rate[] = {1,2};
+static const int pfc_divisors[] = {1,2,0,4};
+static unsigned int pll2_mult;
+
+static void master_clk_init(struct clk *clk)
+{
+	clk->rate *= pll2_mult * pll1rate[(__raw_readw(FREQCR) >> 8) & 7];
+}
+
+static struct sh_clk_ops sh7619_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static unsigned long module_clk_recalc(struct clk *clk)
+{
+	int idx = (__raw_readw(FREQCR) & 0x0007);
+	return clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct sh_clk_ops sh7619_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static unsigned long bus_clk_recalc(struct clk *clk)
+{
+	return clk->parent->rate / pll1rate[(__raw_readw(FREQCR) >> 8) & 7];
+}
+
+static struct sh_clk_ops sh7619_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static struct sh_clk_ops sh7619_cpu_clk_ops = {
+	.recalc		= followparent_recalc,
+};
+
+static struct sh_clk_ops *sh7619_clk_ops[] = {
+	&sh7619_master_clk_ops,
+	&sh7619_module_clk_ops,
+	&sh7619_bus_clk_ops,
+	&sh7619_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
+{
+	if (test_mode_pin(MODE_PIN2 | MODE_PIN0) ||
+	    test_mode_pin(MODE_PIN2 | MODE_PIN1))
+		pll2_mult = 2;
+	else if (test_mode_pin(MODE_PIN0) || test_mode_pin(MODE_PIN1))
+		pll2_mult = 4;
+
+	BUG_ON(!pll2_mult);
+
+	if (idx < ARRAY_SIZE(sh7619_clk_ops))
+		*ops = sh7619_clk_ops[idx];
+}
diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S
new file mode 100644
index 000000000..0a1c2bf21
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2/entry.S
@@ -0,0 +1,373 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * arch/sh/kernel/cpu/sh2/entry.S
+ *
+ * The SH-2 exception entry
+ *
+ * Copyright (C) 2005-2008 Yoshinori Sato
+ * Copyright (C) 2005  AXE,Inc.
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <cpu/mmu_context.h>
+#include <asm/unistd.h>
+#include <asm/errno.h>
+#include <asm/page.h>
+	
+/* Offsets to the stack */
+OFF_R0  =  0		/* Return value. New ABI also arg4 */
+OFF_R1  =  4     	/* New ABI: arg5 */
+OFF_R2  =  8     	/* New ABI: arg6 */
+OFF_R3  =  12     	/* New ABI: syscall_nr */
+OFF_R4  =  16     	/* New ABI: arg0 */
+OFF_R5  =  20     	/* New ABI: arg1 */
+OFF_R6  =  24     	/* New ABI: arg2 */
+OFF_R7  =  28     	/* New ABI: arg3 */
+OFF_SP	=  (15*4)
+OFF_PC  =  (16*4)
+OFF_SR	=  (16*4+2*4)
+OFF_TRA	=  (16*4+6*4)
+
+#include <asm/entry-macros.S>
+
+ENTRY(exception_handler)
+	! stack
+	! r0 <- point sp
+	! r1
+	! pc
+	! sr
+	! r0 = temporary
+	! r1 = vector (pseudo EXPEVT / INTEVT / TRA)
+	mov.l	r2,@-sp
+	mov.l	r3,@-sp
+	cli
+	mov.l	$cpu_mode,r2
+#ifdef CONFIG_SMP
+	mov.l	$cpuid,r3
+	mov.l	@r3,r3
+	mov.l	@r3,r3
+	shll2	r3
+	add	r3,r2
+#endif
+	mov.l	@r2,r0
+	mov.l	@(5*4,r15),r3	! previous SR
+	or	r0,r3		! set MD
+	tst	r0,r0
+	bf/s	1f		! previous mode check
+	 mov.l	r3,@(5*4,r15)	! update SR
+	! switch to kernel mode
+	mov.l	__md_bit,r0
+	mov.l	r0,@r2		! enter kernel mode
+	mov.l	$current_thread_info,r2
+#ifdef CONFIG_SMP
+	mov.l	$cpuid,r0
+	mov.l	@r0,r0
+	mov.l	@r0,r0
+	shll2	r0
+	add	r0,r2
+#endif
+	mov.l	@r2,r2
+	mov	#(THREAD_SIZE >> 8),r0
+	shll8	r0
+	add	r2,r0
+	mov	r15,r2		! r2 = user stack top
+	mov	r0,r15		! switch kernel stack
+	mov.l	r1,@-r15	! TRA
+	sts.l	macl, @-r15
+	sts.l	mach, @-r15
+	stc.l	gbr, @-r15
+	mov.l	@(5*4,r2),r0
+	mov.l	r0,@-r15	! original SR
+	sts.l	pr,@-r15
+	mov.l	@(4*4,r2),r0
+	mov.l	r0,@-r15	! original PC
+	mov	r2,r3
+	add	#(4+2)*4,r3	! rewind r0 - r3 + exception frame
+	mov.l	r3,@-r15	! original SP
+	mov.l	r14,@-r15
+	mov.l	r13,@-r15
+	mov.l	r12,@-r15
+	mov.l	r11,@-r15
+	mov.l	r10,@-r15
+	mov.l	r9,@-r15
+	mov.l	r8,@-r15
+	mov.l	r7,@-r15
+	mov.l	r6,@-r15
+	mov.l	r5,@-r15
+	mov.l	r4,@-r15
+	mov	r1,r9		! save TRA
+	mov	r2,r8		! copy user -> kernel stack
+	mov.l	@(0,r8),r3
+	mov.l	r3,@-r15
+	mov.l	@(4,r8),r2
+	mov.l	r2,@-r15
+	mov.l	@(12,r8),r1
+	mov.l	r1,@-r15
+	mov.l	@(8,r8),r0
+	bra	2f
+	 mov.l	r0,@-r15
+1:
+	! in kernel exception
+	mov	#(22-4-4-1)*4+4,r0
+	mov	r15,r2
+	sub	r0,r15
+	mov.l	@r2+,r0		! old R3
+	mov.l	r0,@-r15	
+	mov.l	@r2+,r0		! old R2
+	mov.l	r0,@-r15	
+	mov.l	@(4,r2),r0	! old R1
+	mov.l	r0,@-r15	
+	mov.l	@r2,r0		! old R0
+	mov.l	r0,@-r15
+	add	#8,r2
+	mov.l	@r2+,r3		! old PC
+	mov.l	@r2+,r0		! old SR
+	add	#-4,r2		! exception frame stub (sr)
+	mov.l	r1,@-r2		! TRA
+	sts.l	macl, @-r2
+	sts.l	mach, @-r2
+	stc.l	gbr, @-r2
+	mov.l	r0,@-r2		! save old SR
+	sts.l	pr,@-r2
+	mov.l	r3,@-r2		! save old PC
+	mov	r2,r0
+	add	#8*4,r0
+	mov.l	r0,@-r2		! save old SP
+	mov.l	r14,@-r2
+	mov.l	r13,@-r2
+	mov.l	r12,@-r2
+	mov.l	r11,@-r2
+	mov.l	r10,@-r2
+	mov.l	r9,@-r2
+	mov.l	r8,@-r2
+	mov.l	r7,@-r2
+	mov.l	r6,@-r2
+	mov.l	r5,@-r2
+	mov.l	r4,@-r2
+	mov	r1,r9
+	mov.l	@(OFF_R0,r15),r0
+	mov.l	@(OFF_R1,r15),r1
+	mov.l	@(OFF_R2,r15),r2
+	mov.l	@(OFF_R3,r15),r3
+2:
+	mov	#64,r8
+	cmp/hs	r8,r9
+	bt	interrupt_entry	! vec >= 64 is interrupt
+	mov	#31,r8
+	cmp/hs	r8,r9
+	bt	trap_entry	! 64 > vec >= 31  is trap
+#ifdef CONFIG_CPU_J2
+	mov	#16,r8
+	cmp/hs	r8,r9
+	bt	interrupt_entry	! 31 > vec >= 16 is interrupt
+#endif
+
+	mov.l	4f,r8
+	mov	r9,r4
+	shll2	r9
+	add	r9,r8
+	mov.l	@r8,r8		! exception handler address
+	tst	r8,r8
+	bf	3f
+	mov.l	8f,r8		! unhandled exception
+3:
+	mov.l	5f,r10
+	jmp	@r8
+	 lds	r10,pr
+
+interrupt_entry:
+	mov	r9,r4
+	mov	r15,r5
+	mov.l	6f,r9
+	mov.l	7f,r8
+	jmp	@r8
+	 lds	r9,pr
+
+	.align	2
+4:	.long	exception_handling_table
+5:	.long	ret_from_exception
+6:	.long	ret_from_irq
+7:	.long	do_IRQ
+8:	.long	exception_error
+
+trap_entry:
+	mov	#0x30,r8
+	cmp/ge	r8,r9		! vector 0x1f-0x2f is systemcall
+	bt	1f
+	mov     #0x1f,r9	! convert to unified SH2/3/4 trap number
+1:	
+	shll2	r9			! TRA
+	bra	system_call	! jump common systemcall entry
+	 mov	r9,r8
+	
+#if defined(CONFIG_SH_STANDARD_BIOS)
+	/* Unwind the stack and jmp to the debug entry */
+ENTRY(sh_bios_handler)
+	mov	r15,r0
+	add	#(22-4)*4-4,r0
+	ldc.l	@r0+,gbr
+	lds.l	@r0+,mach
+	lds.l	@r0+,macl
+	mov	r15,r0
+	mov.l	@(OFF_SP,r0),r1
+	mov	#OFF_SR,r2
+	mov.l	@(r0,r2),r3
+	mov.l	r3,@-r1
+	mov	#OFF_SP,r2
+	mov.l	@(r0,r2),r3
+	mov.l	r3,@-r1
+	mov	r15,r0
+	add	#(22-4)*4-8,r0
+	mov.l	1f,r2
+	mov.l	@r2,r2
+	stc	sr,r3
+	mov.l	r2,@r0
+	mov.l	r3,@(4,r0)
+	mov.l	r1,@(8,r0)	
+	mov.l	@r15+, r0
+	mov.l	@r15+, r1
+	mov.l	@r15+, r2
+	mov.l	@r15+, r3
+	mov.l	@r15+, r4
+	mov.l	@r15+, r5
+	mov.l	@r15+, r6
+	mov.l	@r15+, r7
+	mov.l	@r15+, r8
+	mov.l	@r15+, r9
+	mov.l	@r15+, r10
+	mov.l	@r15+, r11
+	mov.l	@r15+, r12
+	mov.l	@r15+, r13
+	mov.l	@r15+, r14
+	add	#8,r15
+	lds.l	@r15+, pr
+	mov.l	@r15+,r15
+	rte
+	 nop
+	.align	2
+1:	.long	gdb_vbr_vector
+#endif /* CONFIG_SH_STANDARD_BIOS */
+
+ENTRY(address_error_trap_handler)
+	mov	r15,r4				! regs
+	mov	#OFF_PC,r0
+	mov.l	@(r0,r15),r6			! pc
+	mov.l	1f,r0
+	jmp	@r0
+	 mov	#0,r5				! writeaccess is unknown
+
+	.align	2
+1:	.long	do_address_error
+
+restore_all:
+	stc	sr,r0
+	or	#0xf0,r0
+	ldc	r0,sr				! all interrupt block (same BL = 1)
+	! restore special register
+	! overlap exception frame
+	mov	r15,r0
+	add	#17*4,r0
+	lds.l	@r0+,pr
+	add	#4,r0
+	ldc.l	@r0+,gbr
+	lds.l	@r0+,mach
+	lds.l	@r0+,macl
+	mov	r15,r0
+	mov.l	$cpu_mode,r2
+#ifdef CONFIG_SMP
+	mov.l	$cpuid,r3
+	mov.l	@r3,r3
+	mov.l	@r3,r3
+	shll2	r3
+	add	r3,r2
+#endif
+	mov	#OFF_SR,r3
+	mov.l	@(r0,r3),r1
+	mov.l	__md_bit,r3
+	and	r1,r3				! copy MD bit
+	mov.l	r3,@r2
+	shll2	r1				! clear MD bit
+	shlr2	r1
+	mov.l	@(OFF_SP,r0),r2
+	add	#-8,r2
+	mov.l	r2,@(OFF_SP,r0)			! point exception frame top
+	mov.l	r1,@(4,r2)			! set sr
+	mov	#OFF_PC,r3
+	mov.l	@(r0,r3),r1
+	mov.l	r1,@r2				! set pc
+	get_current_thread_info r0, r1
+	mov.l	$current_thread_info,r1
+#ifdef CONFIG_SMP
+	mov.l	$cpuid,r3
+	mov.l	@r3,r3
+	mov.l	@r3,r3
+	shll2	r3
+	add	r3,r1
+#endif
+	mov.l	r0,@r1
+	mov.l	@r15+,r0
+	mov.l	@r15+,r1
+	mov.l	@r15+,r2
+	mov.l	@r15+,r3
+	mov.l	@r15+,r4
+	mov.l	@r15+,r5
+	mov.l	@r15+,r6
+	mov.l	@r15+,r7
+	mov.l	@r15+,r8
+	mov.l	@r15+,r9
+	mov.l	@r15+,r10
+	mov.l	@r15+,r11
+	mov.l	@r15+,r12
+	mov.l	@r15+,r13
+	mov.l	@r15+,r14
+	mov.l	@r15,r15
+	rte
+	 nop
+
+	.align 2
+__md_bit:
+	.long	0x40000000
+$current_thread_info:
+	.long	__current_thread_info
+$cpu_mode:	
+	.long	__cpu_mode
+#ifdef CONFIG_SMP
+$cpuid:
+	.long sh2_cpuid_addr
+#endif
+		
+! common exception handler
+#include "../../entry-common.S"
+
+#ifdef CONFIG_NR_CPUS
+#define NR_CPUS CONFIG_NR_CPUS
+#else
+#define NR_CPUS 1
+#endif
+	
+	.data
+! cpu operation mode 
+! bit30 = MD (compatible SH3/4)
+__cpu_mode:
+	.rept	NR_CPUS
+	.long	0x40000000
+	.endr
+
+#ifdef CONFIG_SMP
+.global sh2_cpuid_addr
+sh2_cpuid_addr:
+	.long	dummy_cpuid
+dummy_cpuid:
+	.long	0
+#endif
+		
+	.section	.bss
+__current_thread_info:
+	.rept	NR_CPUS
+	.long	0
+	.endr
+
+ENTRY(exception_handling_table)
+	.space	4*32
diff --git a/arch/sh/kernel/cpu/sh2/ex.S b/arch/sh/kernel/cpu/sh2/ex.S
new file mode 100644
index 000000000..dd0cc887a
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2/ex.S
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * arch/sh/kernel/cpu/sh2/ex.S
+ *
+ * The SH-2 exception vector table
+ *
+ * Copyright (C) 2005 Yoshinori Sato
+ */
+
+#include <linux/linkage.h>
+
+!
+! convert Exception Vector to Exception Number
+!
+exception_entry:	
+no	=	0
+	.rept	256
+	mov.l	r1,@-sp
+	bra	exception_trampoline
+	mov	#no,r1
+no	=	no + 1
+	.endr
+exception_trampoline:
+	mov.l	r0,@-sp
+	mov.l	$exception_handler,r0
+	extu.b	r1,r1
+	jmp	@r0
+	  extu.w	r1,r1
+
+	.align	2
+$exception_entry:
+	.long	exception_entry
+$exception_handler:
+	.long	exception_handler
+!
+! Exception Vector Base
+!
+	.align	2
+ENTRY(vbr_base)
+vector	=	0
+	.rept	256
+	.long	exception_entry + vector * 6
+vector	=	vector + 1
+	.endr
diff --git a/arch/sh/kernel/cpu/sh2/probe.c b/arch/sh/kernel/cpu/sh2/probe.c
new file mode 100644
index 000000000..d342ea088
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2/probe.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/sh/kernel/cpu/sh2/probe.c
+ *
+ * CPU Subtype Probing for SH-2.
+ *
+ * Copyright (C) 2002 Paul Mundt
+ */
+#include <linux/init.h>
+#include <linux/of_fdt.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+
+#if defined(CONFIG_CPU_J2)
+extern u32 __iomem *j2_ccr_base;
+static int __init scan_cache(unsigned long node, const char *uname,
+			     int depth, void *data)
+{
+	if (!of_flat_dt_is_compatible(node, "jcore,cache"))
+		return 0;
+
+	j2_ccr_base = (u32 __iomem *)of_flat_dt_translate_address(node);
+
+	return 1;
+}
+#endif
+
+void __ref cpu_probe(void)
+{
+#if defined(CONFIG_CPU_SUBTYPE_SH7619)
+	boot_cpu_data.type			= CPU_SH7619;
+	boot_cpu_data.dcache.ways		= 4;
+	boot_cpu_data.dcache.way_incr	= (1<<12);
+	boot_cpu_data.dcache.sets		= 256;
+	boot_cpu_data.dcache.entry_shift	= 4;
+	boot_cpu_data.dcache.linesz		= L1_CACHE_BYTES;
+	boot_cpu_data.dcache.flags		= 0;
+#endif
+
+#if defined(CONFIG_CPU_J2)
+#if defined(CONFIG_SMP)
+	unsigned cpu = hard_smp_processor_id();
+#else
+	unsigned cpu = 0;
+#endif
+	if (cpu == 0) of_scan_flat_dt(scan_cache, NULL);
+	if (j2_ccr_base) __raw_writel(0x80000303, j2_ccr_base + 4*cpu);
+	if (cpu != 0) return;
+	boot_cpu_data.type			= CPU_J2;
+
+	/* These defaults are appropriate for the original/current
+	 * J2 cache. Once there is a proper framework for getting cache
+	 * info from device tree, we should switch to that. */
+	boot_cpu_data.dcache.ways		= 1;
+	boot_cpu_data.dcache.sets		= 256;
+	boot_cpu_data.dcache.entry_shift	= 5;
+	boot_cpu_data.dcache.linesz		= 32;
+	boot_cpu_data.dcache.flags		= 0;
+
+	boot_cpu_data.flags |= CPU_HAS_CAS_L;
+#else
+	/*
+	 * SH-2 doesn't have separate caches
+	 */
+	boot_cpu_data.dcache.flags |= SH_CACHE_COMBINED;
+#endif
+	boot_cpu_data.icache = boot_cpu_data.dcache;
+	boot_cpu_data.family = CPU_FAMILY_SH2;
+}
diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
new file mode 100644
index 000000000..b1c877b6a
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SH7619 Setup
+ *
+ *  Copyright (C) 2006  Yoshinori Sato
+ *  Copyright (C) 2009  Paul Mundt
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_eth.h>
+#include <linux/sh_timer.h>
+#include <linux/io.h>
+#include <asm/platform_early.h>
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	WDT, EDMAC, CMT0, CMT1,
+	SCIF0, SCIF1, SCIF2,
+	HIF_HIFI, HIF_HIFBI,
+	DMAC0, DMAC1, DMAC2, DMAC3,
+	SIOF,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
+	INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
+	INTC_IRQ(IRQ4, 80), INTC_IRQ(IRQ5, 81),
+	INTC_IRQ(IRQ6, 82), INTC_IRQ(IRQ7, 83),
+	INTC_IRQ(WDT, 84), INTC_IRQ(EDMAC, 85),
+	INTC_IRQ(CMT0, 86), INTC_IRQ(CMT1, 87),
+	INTC_IRQ(SCIF0, 88), INTC_IRQ(SCIF0, 89),
+	INTC_IRQ(SCIF0, 90), INTC_IRQ(SCIF0, 91),
+	INTC_IRQ(SCIF1, 92), INTC_IRQ(SCIF1, 93),
+	INTC_IRQ(SCIF1, 94), INTC_IRQ(SCIF1, 95),
+	INTC_IRQ(SCIF2, 96), INTC_IRQ(SCIF2, 97),
+	INTC_IRQ(SCIF2, 98), INTC_IRQ(SCIF2, 99),
+	INTC_IRQ(HIF_HIFI, 100), INTC_IRQ(HIF_HIFBI, 101),
+	INTC_IRQ(DMAC0, 104), INTC_IRQ(DMAC1, 105),
+	INTC_IRQ(DMAC2, 106), INTC_IRQ(DMAC3, 107),
+	INTC_IRQ(SIOF, 108),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xf8140006, 0, 16, 4, /* IPRA */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
+	{ 0xf8140008, 0, 16, 4, /* IPRB */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
+	{ 0xf8080000, 0, 16, 4, /* IPRC */ { WDT, EDMAC, CMT0, CMT1 } },
+	{ 0xf8080002, 0, 16, 4, /* IPRD */ { SCIF0, SCIF1, SCIF2 } },
+	{ 0xf8080004, 0, 16, 4, /* IPRE */ { HIF_HIFI, HIF_HIFBI } },
+	{ 0xf8080006, 0, 16, 4, /* IPRF */ { DMAC0, DMAC1, DMAC2, DMAC3 } },
+	{ 0xf8080008, 0, 16, 4, /* IPRG */ { SIOF } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7619", vectors, NULL,
+			 NULL, prio_registers, NULL);
+
+static struct plat_sci_port scif0_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xf8400000, 0x100),
+	DEFINE_RES_IRQ(88),
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xf8410000, 0x100),
+	DEFINE_RES_IRQ(92),
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.scscr		= SCSCR_REIE,
+	.type		= PORT_SCIF,
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xf8420000, 0x100),
+	DEFINE_RES_IRQ(96),
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct sh_eth_plat_data eth_platform_data = {
+	.phy		= 1,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct resource eth_resources[] = {
+	[0] = {
+		.start = 0xfb000000,
+		.end = 0xfb0001c7,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = 85,
+		.end = 85,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device eth_device = {
+	.name = "sh7619-ether",
+	.id = -1,
+	.dev = {
+		.platform_data = &eth_platform_data,
+	},
+	.num_resources = ARRAY_SIZE(eth_resources),
+	.resource = eth_resources,
+};
+
+static struct sh_timer_config cmt_platform_data = {
+	.channels_mask = 3,
+};
+
+static struct resource cmt_resources[] = {
+	DEFINE_RES_MEM(0xf84a0070, 0x10),
+	DEFINE_RES_IRQ(86),
+	DEFINE_RES_IRQ(87),
+};
+
+static struct platform_device cmt_device = {
+	.name		= "sh-cmt-16",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &cmt_platform_data,
+	},
+	.resource	= cmt_resources,
+	.num_resources	= ARRAY_SIZE(cmt_resources),
+};
+
+static struct platform_device *sh7619_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&eth_device,
+	&cmt_device,
+};
+
+static int __init sh7619_devices_setup(void)
+{
+	return platform_add_devices(sh7619_devices,
+				    ARRAY_SIZE(sh7619_devices));
+}
+arch_initcall(sh7619_devices_setup);
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+}
+
+static struct platform_device *sh7619_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&cmt_device,
+};
+
+#define STBCR3 0xf80a0000
+
+void __init plat_early_device_setup(void)
+{
+	/* enable CMT clock */
+	__raw_writeb(__raw_readb(STBCR3) & ~0x10, STBCR3);
+
+	sh_early_platform_add_devices(sh7619_early_devices,
+				   ARRAY_SIZE(sh7619_early_devices));
+}
diff --git a/arch/sh/kernel/cpu/sh2/smp-j2.c b/arch/sh/kernel/cpu/sh2/smp-j2.c
new file mode 100644
index 000000000..d0d5d8145
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2/smp-j2.c
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SMP support for J2 processor
+ *
+ * Copyright (C) 2015-2016 Smart Energy Instruments, Inc.
+ */
+
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/cmpxchg.h>
+
+DEFINE_PER_CPU(unsigned, j2_ipi_messages);
+
+extern u32 *sh2_cpuid_addr;
+static u32 *j2_ipi_trigger;
+static int j2_ipi_irq;
+
+static irqreturn_t j2_ipi_interrupt_handler(int irq, void *arg)
+{
+	unsigned cpu = hard_smp_processor_id();
+	volatile unsigned *pmsg = &per_cpu(j2_ipi_messages, cpu);
+	unsigned messages, i;
+
+	do messages = *pmsg;
+	while (cmpxchg(pmsg, messages, 0) != messages);
+
+	if (!messages) return IRQ_NONE;
+
+	for (i=0; i<SMP_MSG_NR; i++)
+		if (messages & (1U<<i))
+			smp_message_recv(i);
+
+	return IRQ_HANDLED;
+}
+
+static void j2_smp_setup(void)
+{
+}
+
+static void j2_prepare_cpus(unsigned int max_cpus)
+{
+	struct device_node *np;
+	unsigned i, max = 1;
+
+	np = of_find_compatible_node(NULL, NULL, "jcore,ipi-controller");
+	if (!np)
+		goto out;
+
+	j2_ipi_irq = irq_of_parse_and_map(np, 0);
+	j2_ipi_trigger = of_iomap(np, 0);
+	if (!j2_ipi_irq || !j2_ipi_trigger)
+		goto out;
+
+	np = of_find_compatible_node(NULL, NULL, "jcore,cpuid-mmio");
+	if (!np)
+		goto out;
+
+	sh2_cpuid_addr = of_iomap(np, 0);
+	if (!sh2_cpuid_addr)
+		goto out;
+
+	if (request_irq(j2_ipi_irq, j2_ipi_interrupt_handler, IRQF_PERCPU,
+			"ipi", (void *)j2_ipi_interrupt_handler) != 0)
+		goto out;
+
+	max = max_cpus;
+out:
+	/* Disable any cpus past max_cpus, or all secondaries if we didn't
+	 * get the necessary resources to support SMP. */
+	for (i=max; i<NR_CPUS; i++) {
+		set_cpu_possible(i, false);
+		set_cpu_present(i, false);
+	}
+}
+
+static void j2_start_cpu(unsigned int cpu, unsigned long entry_point)
+{
+	struct device_node *np;
+	u32 regs[2];
+	void __iomem *release, *initpc;
+
+	if (!cpu) return;
+
+	np = of_get_cpu_node(cpu, NULL);
+	if (!np) return;
+
+	if (of_property_read_u32_array(np, "cpu-release-addr", regs, 2)) return;
+	release = ioremap(regs[0], sizeof(u32));
+	initpc = ioremap(regs[1], sizeof(u32));
+
+	__raw_writel(entry_point, initpc);
+	__raw_writel(1, release);
+
+	iounmap(initpc);
+	iounmap(release);
+
+	pr_info("J2 SMP: requested start of cpu %u\n", cpu);
+}
+
+static unsigned int j2_smp_processor_id(void)
+{
+	return __raw_readl(sh2_cpuid_addr);
+}
+
+static void j2_send_ipi(unsigned int cpu, unsigned int message)
+{
+	volatile unsigned *pmsg;
+	unsigned old;
+	unsigned long val;
+
+	/* There is only one IPI interrupt shared by all messages, so
+	 * we keep a separate interrupt flag per message type in sw. */
+	pmsg = &per_cpu(j2_ipi_messages, cpu);
+	do old = *pmsg;
+	while (cmpxchg(pmsg, old, old|(1U<<message)) != old);
+
+	/* Generate the actual interrupt by writing to CCRn bit 28. */
+	val = __raw_readl(j2_ipi_trigger + cpu);
+	__raw_writel(val | (1U<<28), j2_ipi_trigger + cpu);
+}
+
+static struct plat_smp_ops j2_smp_ops = {
+	.smp_setup		= j2_smp_setup,
+	.prepare_cpus		= j2_prepare_cpus,
+	.start_cpu		= j2_start_cpu,
+	.smp_processor_id	= j2_smp_processor_id,
+	.send_ipi		= j2_send_ipi,
+	.cpu_die		= native_cpu_die,
+	.cpu_disable		= native_cpu_disable,
+	.play_dead		= native_play_dead,
+};
+
+CPU_METHOD_OF_DECLARE(j2_cpu_method, "jcore,spin-table", &j2_smp_ops);