Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 345 insertions, 0 deletions

diff --git a/arch/x86/boot/compressed/efi_mixed.S b/arch/x86/boot/compressed/efi_mixed.S
new file mode 100644
index 000000000..4ca70bf93
--- /dev/null
+++ b/arch/x86/boot/compressed/efi_mixed.S
@@ -0,0 +1,345 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2014, 2015 Intel Corporation; author Matt Fleming
+ *
+ * Early support for invoking 32-bit EFI services from a 64-bit kernel.
+ *
+ * Because this thunking occurs before ExitBootServices() we have to
+ * restore the firmware's 32-bit GDT and IDT before we make EFI service
+ * calls.
+ *
+ * On the plus side, we don't have to worry about mangling 64-bit
+ * addresses into 32-bits because we're executing with an identity
+ * mapped pagetable and haven't transitioned to 64-bit virtual addresses
+ * yet.
+ */
+
+#include <linux/linkage.h>
+#include <asm/msr.h>
+#include <asm/page_types.h>
+#include <asm/processor-flags.h>
+#include <asm/segment.h>
+
+	.code64
+	.text
+/*
+ * When booting in 64-bit mode on 32-bit EFI firmware, startup_64_mixed_mode()
+ * is the first thing that runs after switching to long mode. Depending on
+ * whether the EFI handover protocol or the compat entry point was used to
+ * enter the kernel, it will either branch to the 64-bit EFI handover
+ * entrypoint at offset 0x390 in the image, or to the 64-bit EFI PE/COFF
+ * entrypoint efi_pe_entry(). In the former case, the bootloader must provide a
+ * struct bootparams pointer as the third argument, so the presence of such a
+ * pointer is used to disambiguate.
+ *
+ *                                                             +--------------+
+ *  +------------------+     +------------+            +------>| efi_pe_entry |
+ *  | efi32_pe_entry   |---->|            |            |       +-----------+--+
+ *  +------------------+     |            |     +------+----------------+  |
+ *                           | startup_32 |---->| startup_64_mixed_mode |  |
+ *  +------------------+     |            |     +------+----------------+  V
+ *  | efi32_stub_entry |---->|            |            |     +------------------+
+ *  +------------------+     +------------+            +---->| efi64_stub_entry |
+ *                                                           +-------------+----+
+ *                           +------------+     +----------+               |
+ *                           | startup_64 |<----| efi_main |<--------------+
+ *                           +------------+     +----------+
+ */
+SYM_FUNC_START(startup_64_mixed_mode)
+	lea	efi32_boot_args(%rip), %rdx
+	mov	0(%rdx), %edi
+	mov	4(%rdx), %esi
+	mov	8(%rdx), %edx		// saved bootparams pointer
+	test	%edx, %edx
+	jnz	efi64_stub_entry
+	/*
+	 * efi_pe_entry uses MS calling convention, which requires 32 bytes of
+	 * shadow space on the stack even if all arguments are passed in
+	 * registers. We also need an additional 8 bytes for the space that
+	 * would be occupied by the return address, and this also results in
+	 * the correct stack alignment for entry.
+	 */
+	sub	$40, %rsp
+	mov	%rdi, %rcx		// MS calling convention
+	mov	%rsi, %rdx
+	jmp	efi_pe_entry
+SYM_FUNC_END(startup_64_mixed_mode)
+
+SYM_FUNC_START(__efi64_thunk)
+	push	%rbp
+	push	%rbx
+
+	movl	%ds, %eax
+	push	%rax
+	movl	%es, %eax
+	push	%rax
+	movl	%ss, %eax
+	push	%rax
+
+	/* Copy args passed on stack */
+	movq	0x30(%rsp), %rbp
+	movq	0x38(%rsp), %rbx
+	movq	0x40(%rsp), %rax
+
+	/*
+	 * Convert x86-64 ABI params to i386 ABI
+	 */
+	subq	$64, %rsp
+	movl	%esi, 0x0(%rsp)
+	movl	%edx, 0x4(%rsp)
+	movl	%ecx, 0x8(%rsp)
+	movl	%r8d, 0xc(%rsp)
+	movl	%r9d, 0x10(%rsp)
+	movl	%ebp, 0x14(%rsp)
+	movl	%ebx, 0x18(%rsp)
+	movl	%eax, 0x1c(%rsp)
+
+	leaq	0x20(%rsp), %rbx
+	sgdt	(%rbx)
+	sidt	16(%rbx)
+
+	leaq	1f(%rip), %rbp
+
+	/*
+	 * Switch to IDT and GDT with 32-bit segments. These are the firmware
+	 * GDT and IDT that were installed when the kernel started executing.
+	 * The pointers were saved by the efi32_entry() routine below.
+	 *
+	 * Pass the saved DS selector to the 32-bit code, and use far return to
+	 * restore the saved CS selector.
+	 */
+	lidt	efi32_boot_idt(%rip)
+	lgdt	efi32_boot_gdt(%rip)
+
+	movzwl	efi32_boot_ds(%rip), %edx
+	movzwq	efi32_boot_cs(%rip), %rax
+	pushq	%rax
+	leaq	efi_enter32(%rip), %rax
+	pushq	%rax
+	lretq
+
+1:	addq	$64, %rsp
+	movq	%rdi, %rax
+
+	pop	%rbx
+	movl	%ebx, %ss
+	pop	%rbx
+	movl	%ebx, %es
+	pop	%rbx
+	movl	%ebx, %ds
+	/* Clear out 32-bit selector from FS and GS */
+	xorl	%ebx, %ebx
+	movl	%ebx, %fs
+	movl	%ebx, %gs
+
+	pop	%rbx
+	pop	%rbp
+	RET
+SYM_FUNC_END(__efi64_thunk)
+
+	.code32
+/*
+ * EFI service pointer must be in %edi.
+ *
+ * The stack should represent the 32-bit calling convention.
+ */
+SYM_FUNC_START_LOCAL(efi_enter32)
+	/* Load firmware selector into data and stack segment registers */
+	movl	%edx, %ds
+	movl	%edx, %es
+	movl	%edx, %fs
+	movl	%edx, %gs
+	movl	%edx, %ss
+
+	/* Reload pgtables */
+	movl	%cr3, %eax
+	movl	%eax, %cr3
+
+	/* Disable paging */
+	movl	%cr0, %eax
+	btrl	$X86_CR0_PG_BIT, %eax
+	movl	%eax, %cr0
+
+	/* Disable long mode via EFER */
+	movl	$MSR_EFER, %ecx
+	rdmsr
+	btrl	$_EFER_LME, %eax
+	wrmsr
+
+	call	*%edi
+
+	/* We must preserve return value */
+	movl	%eax, %edi
+
+	/*
+	 * Some firmware will return with interrupts enabled. Be sure to
+	 * disable them before we switch GDTs and IDTs.
+	 */
+	cli
+
+	lidtl	16(%ebx)
+	lgdtl	(%ebx)
+
+	movl	%cr4, %eax
+	btsl	$(X86_CR4_PAE_BIT), %eax
+	movl	%eax, %cr4
+
+	movl	%cr3, %eax
+	movl	%eax, %cr3
+
+	movl	$MSR_EFER, %ecx
+	rdmsr
+	btsl	$_EFER_LME, %eax
+	wrmsr
+
+	xorl	%eax, %eax
+	lldt	%ax
+
+	pushl	$__KERNEL_CS
+	pushl	%ebp
+
+	/* Enable paging */
+	movl	%cr0, %eax
+	btsl	$X86_CR0_PG_BIT, %eax
+	movl	%eax, %cr0
+	lret
+SYM_FUNC_END(efi_enter32)
+
+/*
+ * This is the common EFI stub entry point for mixed mode.
+ *
+ * Arguments:	%ecx	image handle
+ * 		%edx	EFI system table pointer
+ *		%esi	struct bootparams pointer (or NULL when not using
+ *			the EFI handover protocol)
+ *
+ * Since this is the point of no return for ordinary execution, no registers
+ * are considered live except for the function parameters. [Note that the EFI
+ * stub may still exit and return to the firmware using the Exit() EFI boot
+ * service.]
+ */
+SYM_FUNC_START(efi32_entry)
+	call	1f
+1:	pop	%ebx
+
+	/* Save firmware GDTR and code/data selectors */
+	sgdtl	(efi32_boot_gdt - 1b)(%ebx)
+	movw	%cs, (efi32_boot_cs - 1b)(%ebx)
+	movw	%ds, (efi32_boot_ds - 1b)(%ebx)
+
+	/* Store firmware IDT descriptor */
+	sidtl	(efi32_boot_idt - 1b)(%ebx)
+
+	/* Store boot arguments */
+	leal	(efi32_boot_args - 1b)(%ebx), %ebx
+	movl	%ecx, 0(%ebx)
+	movl	%edx, 4(%ebx)
+	movl	%esi, 8(%ebx)
+	movb	$0x0, 12(%ebx)          // efi_is64
+
+	/* Disable paging */
+	movl	%cr0, %eax
+	btrl	$X86_CR0_PG_BIT, %eax
+	movl	%eax, %cr0
+
+	jmp	startup_32
+SYM_FUNC_END(efi32_entry)
+
+#define ST32_boottime		60 // offsetof(efi_system_table_32_t, boottime)
+#define BS32_handle_protocol	88 // offsetof(efi_boot_services_32_t, handle_protocol)
+#define LI32_image_base		32 // offsetof(efi_loaded_image_32_t, image_base)
+
+/*
+ * efi_status_t efi32_pe_entry(efi_handle_t image_handle,
+ *			       efi_system_table_32_t *sys_table)
+ */
+SYM_FUNC_START(efi32_pe_entry)
+	pushl	%ebp
+	movl	%esp, %ebp
+	pushl	%eax				// dummy push to allocate loaded_image
+
+	pushl	%ebx				// save callee-save registers
+	pushl	%edi
+
+	call	verify_cpu			// check for long mode support
+	testl	%eax, %eax
+	movl	$0x80000003, %eax		// EFI_UNSUPPORTED
+	jnz	2f
+
+	call	1f
+1:	pop	%ebx
+
+	/* Get the loaded image protocol pointer from the image handle */
+	leal	-4(%ebp), %eax
+	pushl	%eax				// &loaded_image
+	leal	(loaded_image_proto - 1b)(%ebx), %eax
+	pushl	%eax				// pass the GUID address
+	pushl	8(%ebp)				// pass the image handle
+
+	/*
+	 * Note the alignment of the stack frame.
+	 *   sys_table
+	 *   handle             <-- 16-byte aligned on entry by ABI
+	 *   return address
+	 *   frame pointer
+	 *   loaded_image       <-- local variable
+	 *   saved %ebx		<-- 16-byte aligned here
+	 *   saved %edi
+	 *   &loaded_image
+	 *   &loaded_image_proto
+	 *   handle             <-- 16-byte aligned for call to handle_protocol
+	 */
+
+	movl	12(%ebp), %eax			// sys_table
+	movl	ST32_boottime(%eax), %eax	// sys_table->boottime
+	call	*BS32_handle_protocol(%eax)	// sys_table->boottime->handle_protocol
+	addl	$12, %esp			// restore argument space
+	testl	%eax, %eax
+	jnz	2f
+
+	movl	8(%ebp), %ecx			// image_handle
+	movl	12(%ebp), %edx			// sys_table
+	movl	-4(%ebp), %esi			// loaded_image
+	movl	LI32_image_base(%esi), %esi	// loaded_image->image_base
+	leal	(startup_32 - 1b)(%ebx), %ebp	// runtime address of startup_32
+	/*
+	 * We need to set the image_offset variable here since startup_32() will
+	 * use it before we get to the 64-bit efi_pe_entry() in C code.
+	 */
+	subl	%esi, %ebp			// calculate image_offset
+	movl	%ebp, (image_offset - 1b)(%ebx)	// save image_offset
+	xorl	%esi, %esi
+	jmp	efi32_entry			// pass %ecx, %edx, %esi
+						// no other registers remain live
+
+2:	popl	%edi				// restore callee-save registers
+	popl	%ebx
+	leave
+	RET
+SYM_FUNC_END(efi32_pe_entry)
+
+	.section ".rodata"
+	/* EFI loaded image protocol GUID */
+	.balign 4
+SYM_DATA_START_LOCAL(loaded_image_proto)
+	.long	0x5b1b31a1
+	.word	0x9562, 0x11d2
+	.byte	0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b
+SYM_DATA_END(loaded_image_proto)
+
+	.data
+	.balign	8
+SYM_DATA_START_LOCAL(efi32_boot_gdt)
+	.word	0
+	.quad	0
+SYM_DATA_END(efi32_boot_gdt)
+
+SYM_DATA_START_LOCAL(efi32_boot_idt)
+	.word	0
+	.quad	0
+SYM_DATA_END(efi32_boot_idt)
+
+SYM_DATA_LOCAL(efi32_boot_cs, .word 0)
+SYM_DATA_LOCAL(efi32_boot_ds, .word 0)
+SYM_DATA_LOCAL(efi32_boot_args, .long 0, 0, 0)
+SYM_DATA(efi_is64, .byte 1)