Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 239 insertions, 0 deletions

diff --git a/arch/x86/platform/efi/memmap.c b/arch/x86/platform/efi/memmap.c
new file mode 100644
index 000000000..c69f8471e
--- /dev/null
+++ b/arch/x86/platform/efi/memmap.c
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common EFI memory map functions.
+ */
+
+#define pr_fmt(fmt) "efi: " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/efi.h>
+#include <linux/io.h>
+#include <asm/early_ioremap.h>
+#include <asm/efi.h>
+#include <linux/memblock.h>
+#include <linux/slab.h>
+
+static phys_addr_t __init __efi_memmap_alloc_early(unsigned long size)
+{
+	return memblock_phys_alloc(size, SMP_CACHE_BYTES);
+}
+
+static phys_addr_t __init __efi_memmap_alloc_late(unsigned long size)
+{
+	unsigned int order = get_order(size);
+	struct page *p = alloc_pages(GFP_KERNEL, order);
+
+	if (!p)
+		return 0;
+
+	return PFN_PHYS(page_to_pfn(p));
+}
+
+void __init __efi_memmap_free(u64 phys, unsigned long size, unsigned long flags)
+{
+	if (flags & EFI_MEMMAP_MEMBLOCK) {
+		if (slab_is_available())
+			memblock_free_late(phys, size);
+		else
+			memblock_phys_free(phys, size);
+	} else if (flags & EFI_MEMMAP_SLAB) {
+		struct page *p = pfn_to_page(PHYS_PFN(phys));
+		unsigned int order = get_order(size);
+
+		free_pages((unsigned long) page_address(p), order);
+	}
+}
+
+/**
+ * efi_memmap_alloc - Allocate memory for the EFI memory map
+ * @num_entries: Number of entries in the allocated map.
+ * @data: efi memmap installation parameters
+ *
+ * Depending on whether mm_init() has already been invoked or not,
+ * either memblock or "normal" page allocation is used.
+ *
+ * Returns zero on success, a negative error code on failure.
+ */
+int __init efi_memmap_alloc(unsigned int num_entries,
+		struct efi_memory_map_data *data)
+{
+	/* Expect allocation parameters are zero initialized */
+	WARN_ON(data->phys_map || data->size);
+
+	data->size = num_entries * efi.memmap.desc_size;
+	data->desc_version = efi.memmap.desc_version;
+	data->desc_size = efi.memmap.desc_size;
+	data->flags &= ~(EFI_MEMMAP_SLAB | EFI_MEMMAP_MEMBLOCK);
+	data->flags |= efi.memmap.flags & EFI_MEMMAP_LATE;
+
+	if (slab_is_available()) {
+		data->flags |= EFI_MEMMAP_SLAB;
+		data->phys_map = __efi_memmap_alloc_late(data->size);
+	} else {
+		data->flags |= EFI_MEMMAP_MEMBLOCK;
+		data->phys_map = __efi_memmap_alloc_early(data->size);
+	}
+
+	if (!data->phys_map)
+		return -ENOMEM;
+	return 0;
+}
+
+/**
+ * efi_memmap_install - Install a new EFI memory map in efi.memmap
+ * @ctx: map allocation parameters (address, size, flags)
+ *
+ * Unlike efi_memmap_init_*(), this function does not allow the caller
+ * to switch from early to late mappings. It simply uses the existing
+ * mapping function and installs the new memmap.
+ *
+ * Returns zero on success, a negative error code on failure.
+ */
+int __init efi_memmap_install(struct efi_memory_map_data *data)
+{
+	efi_memmap_unmap();
+
+	if (efi_enabled(EFI_PARAVIRT))
+		return 0;
+
+	return __efi_memmap_init(data);
+}
+
+/**
+ * efi_memmap_split_count - Count number of additional EFI memmap entries
+ * @md: EFI memory descriptor to split
+ * @range: Address range (start, end) to split around
+ *
+ * Returns the number of additional EFI memmap entries required to
+ * accommodate @range.
+ */
+int __init efi_memmap_split_count(efi_memory_desc_t *md, struct range *range)
+{
+	u64 m_start, m_end;
+	u64 start, end;
+	int count = 0;
+
+	start = md->phys_addr;
+	end = start + (md->num_pages << EFI_PAGE_SHIFT) - 1;
+
+	/* modifying range */
+	m_start = range->start;
+	m_end = range->end;
+
+	if (m_start <= start) {
+		/* split into 2 parts */
+		if (start < m_end && m_end < end)
+			count++;
+	}
+
+	if (start < m_start && m_start < end) {
+		/* split into 3 parts */
+		if (m_end < end)
+			count += 2;
+		/* split into 2 parts */
+		if (end <= m_end)
+			count++;
+	}
+
+	return count;
+}
+
+/**
+ * efi_memmap_insert - Insert a memory region in an EFI memmap
+ * @old_memmap: The existing EFI memory map structure
+ * @buf: Address of buffer to store new map
+ * @mem: Memory map entry to insert
+ *
+ * It is suggested that you call efi_memmap_split_count() first
+ * to see how large @buf needs to be.
+ */
+void __init efi_memmap_insert(struct efi_memory_map *old_memmap, void *buf,
+			      struct efi_mem_range *mem)
+{
+	u64 m_start, m_end, m_attr;
+	efi_memory_desc_t *md;
+	u64 start, end;
+	void *old, *new;
+
+	/* modifying range */
+	m_start = mem->range.start;
+	m_end = mem->range.end;
+	m_attr = mem->attribute;
+
+	/*
+	 * The EFI memory map deals with regions in EFI_PAGE_SIZE
+	 * units. Ensure that the region described by 'mem' is aligned
+	 * correctly.
+	 */
+	if (!IS_ALIGNED(m_start, EFI_PAGE_SIZE) ||
+	    !IS_ALIGNED(m_end + 1, EFI_PAGE_SIZE)) {
+		WARN_ON(1);
+		return;
+	}
+
+	for (old = old_memmap->map, new = buf;
+	     old < old_memmap->map_end;
+	     old += old_memmap->desc_size, new += old_memmap->desc_size) {
+
+		/* copy original EFI memory descriptor */
+		memcpy(new, old, old_memmap->desc_size);
+		md = new;
+		start = md->phys_addr;
+		end = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) - 1;
+
+		if (m_start <= start && end <= m_end)
+			md->attribute |= m_attr;
+
+		if (m_start <= start &&
+		    (start < m_end && m_end < end)) {
+			/* first part */
+			md->attribute |= m_attr;
+			md->num_pages = (m_end - md->phys_addr + 1) >>
+				EFI_PAGE_SHIFT;
+			/* latter part */
+			new += old_memmap->desc_size;
+			memcpy(new, old, old_memmap->desc_size);
+			md = new;
+			md->phys_addr = m_end + 1;
+			md->num_pages = (end - md->phys_addr + 1) >>
+				EFI_PAGE_SHIFT;
+		}
+
+		if ((start < m_start && m_start < end) && m_end < end) {
+			/* first part */
+			md->num_pages = (m_start - md->phys_addr) >>
+				EFI_PAGE_SHIFT;
+			/* middle part */
+			new += old_memmap->desc_size;
+			memcpy(new, old, old_memmap->desc_size);
+			md = new;
+			md->attribute |= m_attr;
+			md->phys_addr = m_start;
+			md->num_pages = (m_end - m_start + 1) >>
+				EFI_PAGE_SHIFT;
+			/* last part */
+			new += old_memmap->desc_size;
+			memcpy(new, old, old_memmap->desc_size);
+			md = new;
+			md->phys_addr = m_end + 1;
+			md->num_pages = (end - m_end) >>
+				EFI_PAGE_SHIFT;
+		}
+
+		if ((start < m_start && m_start < end) &&
+		    (end <= m_end)) {
+			/* first part */
+			md->num_pages = (m_start - md->phys_addr) >>
+				EFI_PAGE_SHIFT;
+			/* latter part */
+			new += old_memmap->desc_size;
+			memcpy(new, old, old_memmap->desc_size);
+			md = new;
+			md->phys_addr = m_start;
+			md->num_pages = (end - md->phys_addr + 1) >>
+				EFI_PAGE_SHIFT;
+			md->attribute |= m_attr;
+		}
+	}
+}