aboutsummaryrefslogtreecommitdiff
path: root/drivers/acpi/acpica/Makefile
diff options
context:
space:
mode:
authorLibravatar Linus Torvalds <torvalds@linux-foundation.org>2023-02-21 18:24:12 -0800
committerLibravatar Linus Torvalds <torvalds@linux-foundation.org>2023-02-21 18:24:12 -0800
commit5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 (patch)
treecc5c2d0a898769fd59549594fedb3ee6f84e59a0 /drivers/acpi/acpica/Makefile
downloadlinux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.tar.gz
linux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.zip
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted
Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ...
Diffstat (limited to 'drivers/acpi/acpica/Makefile')
-rw-r--r--drivers/acpi/acpica/Makefile212
1 files changed, 212 insertions, 0 deletions
diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile
new file mode 100644
index 000000000..30f3fc13c
--- /dev/null
+++ b/drivers/acpi/acpica/Makefile
@@ -0,0 +1,212 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for ACPICA Core interpreter
+#
+
+ccflags-y := -D_LINUX -DBUILDING_ACPICA
+ccflags-$(CONFIG_ACPI_DEBUG) += -DACPI_DEBUG_OUTPUT
+
+# use acpi.o to put all files here into acpi.o modparam namespace
+obj-y += acpi.o
+
+acpi-y := \
+ dsargs.o \
+ dscontrol.o \
+ dsdebug.o \
+ dsfield.o \
+ dsinit.o \
+ dsmethod.o \
+ dsmthdat.o \
+ dsobject.o \
+ dsopcode.o \
+ dspkginit.o \
+ dsutils.o \
+ dswexec.o \
+ dswload.o \
+ dswload2.o \
+ dswscope.o \
+ dswstate.o
+
+acpi-y += \
+ evevent.o \
+ evgpe.o \
+ evgpeblk.o \
+ evgpeinit.o \
+ evgpeutil.o \
+ evglock.o \
+ evhandler.o \
+ evmisc.o \
+ evregion.o \
+ evrgnini.o \
+ evsci.o \
+ evxface.o \
+ evxfevnt.o \
+ evxfgpe.o \
+ evxfregn.o
+
+acpi-y += \
+ exconcat.o \
+ exconfig.o \
+ exconvrt.o \
+ excreate.o \
+ exdebug.o \
+ exdump.o \
+ exfield.o \
+ exfldio.o \
+ exmisc.o \
+ exmutex.o \
+ exnames.o \
+ exoparg1.o \
+ exoparg2.o \
+ exoparg3.o \
+ exoparg6.o \
+ exprep.o \
+ exregion.o \
+ exresnte.o \
+ exresolv.o \
+ exresop.o \
+ exserial.o \
+ exstore.o \
+ exstoren.o \
+ exstorob.o \
+ exsystem.o \
+ extrace.o \
+ exutils.o
+
+acpi-y += \
+ hwacpi.o \
+ hwesleep.o \
+ hwgpe.o \
+ hwregs.o \
+ hwsleep.o \
+ hwvalid.o \
+ hwxface.o \
+ hwxfsleep.o
+
+acpi-$(CONFIG_PCI) += hwpci.o
+acpi-$(ACPI_FUTURE_USAGE) += hwtimer.o
+
+acpi-y += \
+ nsaccess.o \
+ nsalloc.o \
+ nsarguments.o \
+ nsconvert.o \
+ nsdump.o \
+ nseval.o \
+ nsinit.o \
+ nsload.o \
+ nsnames.o \
+ nsobject.o \
+ nsparse.o \
+ nspredef.o \
+ nsprepkg.o \
+ nsrepair.o \
+ nsrepair2.o \
+ nssearch.o \
+ nsutils.o \
+ nswalk.o \
+ nsxfeval.o \
+ nsxfname.o \
+ nsxfobj.o
+
+acpi-$(ACPI_FUTURE_USAGE) += nsdumpdv.o
+
+acpi-y += \
+ psargs.o \
+ psloop.o \
+ psobject.o \
+ psopcode.o \
+ psopinfo.o \
+ psparse.o \
+ psscope.o \
+ pstree.o \
+ psutils.o \
+ pswalk.o \
+ psxface.o
+
+acpi-y += \
+ rsaddr.o \
+ rscalc.o \
+ rscreate.o \
+ rsdumpinfo.o \
+ rsinfo.o \
+ rsio.o \
+ rsirq.o \
+ rslist.o \
+ rsmemory.o \
+ rsmisc.o \
+ rsserial.o \
+ rsutils.o \
+ rsxface.o
+
+acpi-y += \
+ tbdata.o \
+ tbfadt.o \
+ tbfind.o \
+ tbinstal.o \
+ tbprint.o \
+ tbutils.o \
+ tbxface.o \
+ tbxfload.o \
+ tbxfroot.o
+
+acpi-y += \
+ utaddress.o \
+ utalloc.o \
+ utascii.o \
+ utbuffer.o \
+ utcksum.o \
+ utcopy.o \
+ utexcep.o \
+ utdebug.o \
+ utdecode.o \
+ utdelete.o \
+ uterror.o \
+ uteval.o \
+ utglobal.o \
+ uthex.o \
+ utids.o \
+ utinit.o \
+ utlock.o \
+ utmath.o \
+ utmisc.o \
+ utmutex.o \
+ utnonansi.o \
+ utobject.o \
+ utosi.o \
+ utownerid.o \
+ utpredef.o \
+ utresdecode.o \
+ utresrc.o \
+ utstate.o \
+ utstring.o \
+ utstrsuppt.o \
+ utstrtoul64.o \
+ utxface.o \
+ utxfinit.o \
+ utxferror.o \
+ utxfmutex.o
+
+acpi-$(CONFIG_ACPI_DEBUGGER) += \
+ dbcmds.o \
+ dbconvert.o \
+ dbdisply.o \
+ dbexec.o \
+ dbhistry.o \
+ dbinput.o \
+ dbmethod.o \
+ dbnames.o \
+ dbobject.o \
+ dbstats.o \
+ dbutils.o \
+ dbxface.o \
+ rsdump.o \
+
+acpi-$(ACPI_FUTURE_USAGE) += \
+ dbfileio.o \
+ dbtest.o \
+ utcache.o \
+ utprint.o \
+ uttrack.o \
+ utuuid.o
+