Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 230 insertions, 0 deletions

diff --git a/drivers/base/power/common.c b/drivers/base/power/common.c
new file mode 100644
index 000000000..72115917e
--- /dev/null
+++ b/drivers/base/power/common.c
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * drivers/base/power/common.c - Common device power management code.
+ *
+ * Copyright (C) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Renesas Electronics Corp.
+ */
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/slab.h>
+#include <linux/pm_clock.h>
+#include <linux/acpi.h>
+#include <linux/pm_domain.h>
+
+#include "power.h"
+
+/**
+ * dev_pm_get_subsys_data - Create or refcount power.subsys_data for device.
+ * @dev: Device to handle.
+ *
+ * If power.subsys_data is NULL, point it to a new object, otherwise increment
+ * its reference counter.  Return 0 if new object has been created or refcount
+ * increased, otherwise negative error code.
+ */
+int dev_pm_get_subsys_data(struct device *dev)
+{
+	struct pm_subsys_data *psd;
+
+	psd = kzalloc(sizeof(*psd), GFP_KERNEL);
+	if (!psd)
+		return -ENOMEM;
+
+	spin_lock_irq(&dev->power.lock);
+
+	if (dev->power.subsys_data) {
+		dev->power.subsys_data->refcount++;
+	} else {
+		spin_lock_init(&psd->lock);
+		psd->refcount = 1;
+		dev->power.subsys_data = psd;
+		pm_clk_init(dev);
+		psd = NULL;
+	}
+
+	spin_unlock_irq(&dev->power.lock);
+
+	/* kfree() verifies that its argument is nonzero. */
+	kfree(psd);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dev_pm_get_subsys_data);
+
+/**
+ * dev_pm_put_subsys_data - Drop reference to power.subsys_data.
+ * @dev: Device to handle.
+ *
+ * If the reference counter of power.subsys_data is zero after dropping the
+ * reference, power.subsys_data is removed.
+ */
+void dev_pm_put_subsys_data(struct device *dev)
+{
+	struct pm_subsys_data *psd;
+
+	spin_lock_irq(&dev->power.lock);
+
+	psd = dev_to_psd(dev);
+	if (!psd)
+		goto out;
+
+	if (--psd->refcount == 0)
+		dev->power.subsys_data = NULL;
+	else
+		psd = NULL;
+
+ out:
+	spin_unlock_irq(&dev->power.lock);
+	kfree(psd);
+}
+EXPORT_SYMBOL_GPL(dev_pm_put_subsys_data);
+
+/**
+ * dev_pm_domain_attach - Attach a device to its PM domain.
+ * @dev: Device to attach.
+ * @power_on: Used to indicate whether we should power on the device.
+ *
+ * The @dev may only be attached to a single PM domain. By iterating through
+ * the available alternatives we try to find a valid PM domain for the device.
+ * As attachment succeeds, the ->detach() callback in the struct dev_pm_domain
+ * should be assigned by the corresponding attach function.
+ *
+ * This function should typically be invoked from subsystem level code during
+ * the probe phase. Especially for those that holds devices which requires
+ * power management through PM domains.
+ *
+ * Callers must ensure proper synchronization of this function with power
+ * management callbacks.
+ *
+ * Returns 0 on successfully attached PM domain, or when it is found that the
+ * device doesn't need a PM domain, else a negative error code.
+ */
+int dev_pm_domain_attach(struct device *dev, bool power_on)
+{
+	int ret;
+
+	if (dev->pm_domain)
+		return 0;
+
+	ret = acpi_dev_pm_attach(dev, power_on);
+	if (!ret)
+		ret = genpd_dev_pm_attach(dev);
+
+	return ret < 0 ? ret : 0;
+}
+EXPORT_SYMBOL_GPL(dev_pm_domain_attach);
+
+/**
+ * dev_pm_domain_attach_by_id - Associate a device with one of its PM domains.
+ * @dev: The device used to lookup the PM domain.
+ * @index: The index of the PM domain.
+ *
+ * As @dev may only be attached to a single PM domain, the backend PM domain
+ * provider creates a virtual device to attach instead. If attachment succeeds,
+ * the ->detach() callback in the struct dev_pm_domain are assigned by the
+ * corresponding backend attach function, as to deal with detaching of the
+ * created virtual device.
+ *
+ * This function should typically be invoked by a driver during the probe phase,
+ * in case its device requires power management through multiple PM domains. The
+ * driver may benefit from using the received device, to configure device-links
+ * towards its original device. Depending on the use-case and if needed, the
+ * links may be dynamically changed by the driver, which allows it to control
+ * the power to the PM domains independently from each other.
+ *
+ * Callers must ensure proper synchronization of this function with power
+ * management callbacks.
+ *
+ * Returns the virtual created device when successfully attached to its PM
+ * domain, NULL in case @dev don't need a PM domain, else an ERR_PTR().
+ * Note that, to detach the returned virtual device, the driver shall call
+ * dev_pm_domain_detach() on it, typically during the remove phase.
+ */
+struct device *dev_pm_domain_attach_by_id(struct device *dev,
+					  unsigned int index)
+{
+	if (dev->pm_domain)
+		return ERR_PTR(-EEXIST);
+
+	return genpd_dev_pm_attach_by_id(dev, index);
+}
+EXPORT_SYMBOL_GPL(dev_pm_domain_attach_by_id);
+
+/**
+ * dev_pm_domain_attach_by_name - Associate a device with one of its PM domains.
+ * @dev: The device used to lookup the PM domain.
+ * @name: The name of the PM domain.
+ *
+ * For a detailed function description, see dev_pm_domain_attach_by_id().
+ */
+struct device *dev_pm_domain_attach_by_name(struct device *dev,
+					    const char *name)
+{
+	if (dev->pm_domain)
+		return ERR_PTR(-EEXIST);
+
+	return genpd_dev_pm_attach_by_name(dev, name);
+}
+EXPORT_SYMBOL_GPL(dev_pm_domain_attach_by_name);
+
+/**
+ * dev_pm_domain_detach - Detach a device from its PM domain.
+ * @dev: Device to detach.
+ * @power_off: Used to indicate whether we should power off the device.
+ *
+ * This functions will reverse the actions from dev_pm_domain_attach(),
+ * dev_pm_domain_attach_by_id() and dev_pm_domain_attach_by_name(), thus it
+ * detaches @dev from its PM domain.  Typically it should be invoked during the
+ * remove phase, either from subsystem level code or from drivers.
+ *
+ * Callers must ensure proper synchronization of this function with power
+ * management callbacks.
+ */
+void dev_pm_domain_detach(struct device *dev, bool power_off)
+{
+	if (dev->pm_domain && dev->pm_domain->detach)
+		dev->pm_domain->detach(dev, power_off);
+}
+EXPORT_SYMBOL_GPL(dev_pm_domain_detach);
+
+/**
+ * dev_pm_domain_start - Start the device through its PM domain.
+ * @dev: Device to start.
+ *
+ * This function should typically be called during probe by a subsystem/driver,
+ * when it needs to start its device from the PM domain's perspective. Note
+ * that, it's assumed that the PM domain is already powered on when this
+ * function is called.
+ *
+ * Returns 0 on success and negative error values on failures.
+ */
+int dev_pm_domain_start(struct device *dev)
+{
+	if (dev->pm_domain && dev->pm_domain->start)
+		return dev->pm_domain->start(dev);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dev_pm_domain_start);
+
+/**
+ * dev_pm_domain_set - Set PM domain of a device.
+ * @dev: Device whose PM domain is to be set.
+ * @pd: PM domain to be set, or NULL.
+ *
+ * Sets the PM domain the device belongs to. The PM domain of a device needs
+ * to be set before its probe finishes (it's bound to a driver).
+ *
+ * This function must be called with the device lock held.
+ */
+void dev_pm_domain_set(struct device *dev, struct dev_pm_domain *pd)
+{
+	if (dev->pm_domain == pd)
+		return;
+
+	WARN(pd && device_is_bound(dev),
+	     "PM domains can only be changed for unbound devices\n");
+	dev->pm_domain = pd;
+	device_pm_check_callbacks(dev);
+}
+EXPORT_SYMBOL_GPL(dev_pm_domain_set);