Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 748 insertions, 0 deletions

diff --git a/drivers/clk/st/clk-flexgen.c b/drivers/clk/st/clk-flexgen.c
new file mode 100644
index 000000000..7ae4f6561
--- /dev/null
+++ b/drivers/clk/st/clk-flexgen.c
@@ -0,0 +1,748 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * clk-flexgen.c
+ *
+ * Copyright (C) ST-Microelectronics SA 2013
+ * Author:  Maxime Coquelin <maxime.coquelin@st.com> for ST-Microelectronics.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+struct clkgen_clk_out {
+	const char *name;
+	unsigned long flags;
+};
+
+struct clkgen_data {
+	unsigned long flags;
+	bool mode;
+	const struct clkgen_clk_out *outputs;
+	const unsigned int outputs_nb;
+};
+
+struct flexgen {
+	struct clk_hw hw;
+
+	/* Crossbar */
+	struct clk_mux mux;
+	/* Pre-divisor's gate */
+	struct clk_gate pgate;
+	/* Pre-divisor */
+	struct clk_divider pdiv;
+	/* Final divisor's gate */
+	struct clk_gate fgate;
+	/* Final divisor */
+	struct clk_divider fdiv;
+	/* Asynchronous mode control */
+	struct clk_gate sync;
+	/* hw control flags */
+	bool control_mode;
+};
+
+#define to_flexgen(_hw) container_of(_hw, struct flexgen, hw)
+#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
+
+static int flexgen_enable(struct clk_hw *hw)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *pgate_hw = &flexgen->pgate.hw;
+	struct clk_hw *fgate_hw = &flexgen->fgate.hw;
+
+	__clk_hw_set_clk(pgate_hw, hw);
+	__clk_hw_set_clk(fgate_hw, hw);
+
+	clk_gate_ops.enable(pgate_hw);
+
+	clk_gate_ops.enable(fgate_hw);
+
+	pr_debug("%s: flexgen output enabled\n", clk_hw_get_name(hw));
+	return 0;
+}
+
+static void flexgen_disable(struct clk_hw *hw)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *fgate_hw = &flexgen->fgate.hw;
+
+	/* disable only the final gate */
+	__clk_hw_set_clk(fgate_hw, hw);
+
+	clk_gate_ops.disable(fgate_hw);
+
+	pr_debug("%s: flexgen output disabled\n", clk_hw_get_name(hw));
+}
+
+static int flexgen_is_enabled(struct clk_hw *hw)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *fgate_hw = &flexgen->fgate.hw;
+
+	__clk_hw_set_clk(fgate_hw, hw);
+
+	if (!clk_gate_ops.is_enabled(fgate_hw))
+		return 0;
+
+	return 1;
+}
+
+static u8 flexgen_get_parent(struct clk_hw *hw)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *mux_hw = &flexgen->mux.hw;
+
+	__clk_hw_set_clk(mux_hw, hw);
+
+	return clk_mux_ops.get_parent(mux_hw);
+}
+
+static int flexgen_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *mux_hw = &flexgen->mux.hw;
+
+	__clk_hw_set_clk(mux_hw, hw);
+
+	return clk_mux_ops.set_parent(mux_hw, index);
+}
+
+static inline unsigned long
+clk_best_div(unsigned long parent_rate, unsigned long rate)
+{
+	return parent_rate / rate + ((rate > (2*(parent_rate % rate))) ? 0 : 1);
+}
+
+static long flexgen_round_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long *prate)
+{
+	unsigned long div;
+
+	/* Round div according to exact prate and wished rate */
+	div = clk_best_div(*prate, rate);
+
+	if (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) {
+		*prate = rate * div;
+		return rate;
+	}
+
+	return *prate / div;
+}
+
+static unsigned long flexgen_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *pdiv_hw = &flexgen->pdiv.hw;
+	struct clk_hw *fdiv_hw = &flexgen->fdiv.hw;
+	unsigned long mid_rate;
+
+	__clk_hw_set_clk(pdiv_hw, hw);
+	__clk_hw_set_clk(fdiv_hw, hw);
+
+	mid_rate = clk_divider_ops.recalc_rate(pdiv_hw, parent_rate);
+
+	return clk_divider_ops.recalc_rate(fdiv_hw, mid_rate);
+}
+
+static int flexgen_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *pdiv_hw = &flexgen->pdiv.hw;
+	struct clk_hw *fdiv_hw = &flexgen->fdiv.hw;
+	struct clk_hw *sync_hw = &flexgen->sync.hw;
+	struct clk_gate *config = to_clk_gate(sync_hw);
+	unsigned long div = 0;
+	int ret = 0;
+	u32 reg;
+
+	__clk_hw_set_clk(pdiv_hw, hw);
+	__clk_hw_set_clk(fdiv_hw, hw);
+
+	if (flexgen->control_mode) {
+		reg = readl(config->reg);
+		reg &= ~BIT(config->bit_idx);
+		writel(reg, config->reg);
+	}
+
+	div = clk_best_div(parent_rate, rate);
+
+	/*
+	* pdiv is mainly targeted for low freq results, while fdiv
+	* should be used for div <= 64. The other way round can
+	* lead to 'duty cycle' issues.
+	*/
+
+	if (div <= 64) {
+		clk_divider_ops.set_rate(pdiv_hw, parent_rate, parent_rate);
+		ret = clk_divider_ops.set_rate(fdiv_hw, rate, rate * div);
+	} else {
+		clk_divider_ops.set_rate(fdiv_hw, parent_rate, parent_rate);
+		ret = clk_divider_ops.set_rate(pdiv_hw, rate, rate * div);
+	}
+
+	return ret;
+}
+
+static const struct clk_ops flexgen_ops = {
+	.enable = flexgen_enable,
+	.disable = flexgen_disable,
+	.is_enabled = flexgen_is_enabled,
+	.get_parent = flexgen_get_parent,
+	.set_parent = flexgen_set_parent,
+	.round_rate = flexgen_round_rate,
+	.recalc_rate = flexgen_recalc_rate,
+	.set_rate = flexgen_set_rate,
+};
+
+static struct clk *clk_register_flexgen(const char *name,
+				const char **parent_names, u8 num_parents,
+				void __iomem *reg, spinlock_t *lock, u32 idx,
+				unsigned long flexgen_flags, bool mode) {
+	struct flexgen *fgxbar;
+	struct clk *clk;
+	struct clk_init_data init;
+	u32  xbar_shift;
+	void __iomem *xbar_reg, *fdiv_reg;
+
+	fgxbar = kzalloc(sizeof(struct flexgen), GFP_KERNEL);
+	if (!fgxbar)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &flexgen_ops;
+	init.flags = CLK_GET_RATE_NOCACHE | flexgen_flags;
+	init.parent_names = parent_names;
+	init.num_parents = num_parents;
+
+	xbar_reg = reg + 0x18 + (idx & ~0x3);
+	xbar_shift = (idx % 4) * 0x8;
+	fdiv_reg = reg + 0x164 + idx * 4;
+
+	/* Crossbar element config */
+	fgxbar->mux.lock = lock;
+	fgxbar->mux.mask = BIT(6) - 1;
+	fgxbar->mux.reg = xbar_reg;
+	fgxbar->mux.shift = xbar_shift;
+	fgxbar->mux.table = NULL;
+
+
+	/* Pre-divider's gate config (in xbar register)*/
+	fgxbar->pgate.lock = lock;
+	fgxbar->pgate.reg = xbar_reg;
+	fgxbar->pgate.bit_idx = xbar_shift + 6;
+
+	/* Pre-divider config */
+	fgxbar->pdiv.lock = lock;
+	fgxbar->pdiv.reg = reg + 0x58 + idx * 4;
+	fgxbar->pdiv.width = 10;
+
+	/* Final divider's gate config */
+	fgxbar->fgate.lock = lock;
+	fgxbar->fgate.reg = fdiv_reg;
+	fgxbar->fgate.bit_idx = 6;
+
+	/* Final divider config */
+	fgxbar->fdiv.lock = lock;
+	fgxbar->fdiv.reg = fdiv_reg;
+	fgxbar->fdiv.width = 6;
+
+	/* Final divider sync config */
+	fgxbar->sync.lock = lock;
+	fgxbar->sync.reg = fdiv_reg;
+	fgxbar->sync.bit_idx = 7;
+
+	fgxbar->control_mode = mode;
+
+	fgxbar->hw.init = &init;
+
+	clk = clk_register(NULL, &fgxbar->hw);
+	if (IS_ERR(clk))
+		kfree(fgxbar);
+	else
+		pr_debug("%s: parent %s rate %u\n",
+			__clk_get_name(clk),
+			__clk_get_name(clk_get_parent(clk)),
+			(unsigned int)clk_get_rate(clk));
+	return clk;
+}
+
+static const char ** __init flexgen_get_parents(struct device_node *np,
+						       int *num_parents)
+{
+	const char **parents;
+	unsigned int nparents;
+
+	nparents = of_clk_get_parent_count(np);
+	if (WARN_ON(!nparents))
+		return NULL;
+
+	parents = kcalloc(nparents, sizeof(const char *), GFP_KERNEL);
+	if (!parents)
+		return NULL;
+
+	*num_parents = of_clk_parent_fill(np, parents, nparents);
+
+	return parents;
+}
+
+static const struct clkgen_data clkgen_audio = {
+	.flags = CLK_SET_RATE_PARENT,
+};
+
+static const struct clkgen_data clkgen_video = {
+	.flags = CLK_SET_RATE_PARENT,
+	.mode = 1,
+};
+
+static const struct clkgen_clk_out clkgen_stih407_a0_clk_out[] = {
+	/* This clk needs to be on so that memory interface is accessible */
+	{ .name = "clk-ic-lmi0", .flags = CLK_IS_CRITICAL },
+};
+
+static const struct clkgen_data clkgen_stih407_a0 = {
+	.outputs = clkgen_stih407_a0_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih407_a0_clk_out),
+};
+
+static const struct clkgen_clk_out clkgen_stih410_a0_clk_out[] = {
+	/* Those clks need to be on so that memory interface is accessible */
+	{ .name = "clk-ic-lmi0", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-ic-lmi1", .flags = CLK_IS_CRITICAL },
+};
+
+static const struct clkgen_data clkgen_stih410_a0 = {
+	.outputs = clkgen_stih410_a0_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih410_a0_clk_out),
+};
+
+static const struct clkgen_clk_out clkgen_stih407_c0_clk_out[] = {
+	{ .name = "clk-icn-gpu", },
+	{ .name = "clk-fdma", },
+	{ .name = "clk-nand", },
+	{ .name = "clk-hva", },
+	{ .name = "clk-proc-stfe", },
+	{ .name = "clk-proc-tp", },
+	{ .name = "clk-rx-icn-dmu", },
+	{ .name = "clk-rx-icn-hva", },
+	/* This clk needs to be on to keep bus interconnect alive */
+	{ .name = "clk-icn-cpu", .flags = CLK_IS_CRITICAL },
+	/* This clk needs to be on to keep bus interconnect alive */
+	{ .name = "clk-tx-icn-dmu", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-mmc-0", },
+	{ .name = "clk-mmc-1", },
+	{ .name = "clk-jpegdec", },
+	/* This clk needs to be on to keep A9 running */
+	{ .name = "clk-ext2fa9", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-ic-bdisp-0", },
+	{ .name = "clk-ic-bdisp-1", },
+	{ .name = "clk-pp-dmu", },
+	{ .name = "clk-vid-dmu", },
+	{ .name = "clk-dss-lpc", },
+	{ .name = "clk-st231-aud-0", },
+	{ .name = "clk-st231-gp-1", },
+	{ .name = "clk-st231-dmu", },
+	/* This clk needs to be on to keep bus interconnect alive */
+	{ .name = "clk-icn-lmi", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-tx-icn-disp-1", },
+	/* This clk needs to be on to keep bus interconnect alive */
+	{ .name = "clk-icn-sbc", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-stfe-frc2", },
+	{ .name = "clk-eth-phy", },
+	{ .name = "clk-eth-ref-phyclk", },
+	{ .name = "clk-flash-promip", },
+	{ .name = "clk-main-disp", },
+	{ .name = "clk-aux-disp", },
+	{ .name = "clk-compo-dvp", },
+};
+
+static const struct clkgen_data clkgen_stih407_c0 = {
+	.outputs = clkgen_stih407_c0_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih407_c0_clk_out),
+};
+
+static const struct clkgen_clk_out clkgen_stih410_c0_clk_out[] = {
+	{ .name = "clk-icn-gpu", },
+	{ .name = "clk-fdma", },
+	{ .name = "clk-nand", },
+	{ .name = "clk-hva", },
+	{ .name = "clk-proc-stfe", },
+	{ .name = "clk-proc-tp", },
+	{ .name = "clk-rx-icn-dmu", },
+	{ .name = "clk-rx-icn-hva", },
+	/* This clk needs to be on to keep bus interconnect alive */
+	{ .name = "clk-icn-cpu", .flags = CLK_IS_CRITICAL },
+	/* This clk needs to be on to keep bus interconnect alive */
+	{ .name = "clk-tx-icn-dmu", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-mmc-0", },
+	{ .name = "clk-mmc-1", },
+	{ .name = "clk-jpegdec", },
+	/* This clk needs to be on to keep A9 running */
+	{ .name = "clk-ext2fa9", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-ic-bdisp-0", },
+	{ .name = "clk-ic-bdisp-1", },
+	{ .name = "clk-pp-dmu", },
+	{ .name = "clk-vid-dmu", },
+	{ .name = "clk-dss-lpc", },
+	{ .name = "clk-st231-aud-0", },
+	{ .name = "clk-st231-gp-1", },
+	{ .name = "clk-st231-dmu", },
+	/* This clk needs to be on to keep bus interconnect alive */
+	{ .name = "clk-icn-lmi", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-tx-icn-disp-1", },
+	/* This clk needs to be on to keep bus interconnect alive */
+	{ .name = "clk-icn-sbc", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-stfe-frc2", },
+	{ .name = "clk-eth-phy", },
+	{ .name = "clk-eth-ref-phyclk", },
+	{ .name = "clk-flash-promip", },
+	{ .name = "clk-main-disp", },
+	{ .name = "clk-aux-disp", },
+	{ .name = "clk-compo-dvp", },
+	{ .name = "clk-tx-icn-hades", },
+	{ .name = "clk-rx-icn-hades", },
+	/* This clk needs to be on to keep bus interconnect alive */
+	{ .name = "clk-icn-reg-16", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-pp-hades", },
+	{ .name = "clk-clust-hades", },
+	{ .name = "clk-hwpe-hades", },
+	{ .name = "clk-fc-hades", },
+};
+
+static const struct clkgen_data clkgen_stih410_c0 = {
+	.outputs = clkgen_stih410_c0_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih410_c0_clk_out),
+};
+
+static const struct clkgen_clk_out clkgen_stih418_c0_clk_out[] = {
+	{ .name = "clk-icn-gpu", },
+	{ .name = "clk-fdma", },
+	{ .name = "clk-nand", },
+	{ .name = "clk-hva", },
+	{ .name = "clk-proc-stfe", },
+	{ .name = "clk-tp", },
+	/* This clk needs to be on to keep bus interconnect alive */
+	{ .name = "clk-rx-icn-dmu", .flags = CLK_IS_CRITICAL },
+	/* This clk needs to be on to keep bus interconnect alive */
+	{ .name = "clk-rx-icn-hva", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-icn-cpu", .flags = CLK_IS_CRITICAL },
+	/* This clk needs to be on to keep bus interconnect alive */
+	{ .name = "clk-tx-icn-dmu", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-mmc-0", },
+	{ .name = "clk-mmc-1", },
+	{ .name = "clk-jpegdec", },
+	/* This clk needs to be on to keep bus interconnect alive */
+	{ .name = "clk-icn-reg", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-proc-bdisp-0", },
+	{ .name = "clk-proc-bdisp-1", },
+	{ .name = "clk-pp-dmu", },
+	{ .name = "clk-vid-dmu", },
+	{ .name = "clk-dss-lpc", },
+	{ .name = "clk-st231-aud-0", },
+	{ .name = "clk-st231-gp-1", },
+	{ .name = "clk-st231-dmu", },
+	/* This clk needs to be on to keep bus interconnect alive */
+	{ .name = "clk-icn-lmi", .flags = CLK_IS_CRITICAL },
+	/* This clk needs to be on to keep bus interconnect alive */
+	{ .name = "clk-tx-icn-1", .flags = CLK_IS_CRITICAL },
+	/* This clk needs to be on to keep bus interconnect alive */
+	{ .name = "clk-icn-sbc", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-stfe-frc2", },
+	{ .name = "clk-eth-phyref", },
+	{ .name = "clk-eth-ref-phyclk", },
+	{ .name = "clk-flash-promip", },
+	{ .name = "clk-main-disp", },
+	{ .name = "clk-aux-disp", },
+	{ .name = "clk-compo-dvp", },
+	/* This clk needs to be on to keep bus interconnect alive */
+	{ .name = "clk-tx-icn-hades", .flags = CLK_IS_CRITICAL },
+	/* This clk needs to be on to keep bus interconnect alive */
+	{ .name = "clk-rx-icn-hades", .flags = CLK_IS_CRITICAL },
+	/* This clk needs to be on to keep bus interconnect alive */
+	{ .name = "clk-icn-reg-16", .flags = CLK_IS_CRITICAL },
+	{ .name = "clk-pp-hevc", },
+	{ .name = "clk-clust-hevc", },
+	{ .name = "clk-hwpe-hevc", },
+	{ .name = "clk-fc-hevc", },
+	{ .name = "clk-proc-mixer", },
+	{ .name = "clk-proc-sc", },
+	{ .name = "clk-avsp-hevc", },
+};
+
+static const struct clkgen_data clkgen_stih418_c0 = {
+	.outputs = clkgen_stih418_c0_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih418_c0_clk_out),
+};
+
+static const struct clkgen_clk_out clkgen_stih407_d0_clk_out[] = {
+	{ .name = "clk-pcm-0", },
+	{ .name = "clk-pcm-1", },
+	{ .name = "clk-pcm-2", },
+	{ .name = "clk-spdiff", },
+};
+
+static const struct clkgen_data clkgen_stih407_d0 = {
+	.flags = CLK_SET_RATE_PARENT,
+	.outputs = clkgen_stih407_d0_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih407_d0_clk_out),
+};
+
+static const struct clkgen_clk_out clkgen_stih410_d0_clk_out[] = {
+	{ .name = "clk-pcm-0", },
+	{ .name = "clk-pcm-1", },
+	{ .name = "clk-pcm-2", },
+	{ .name = "clk-spdiff", },
+	{ .name = "clk-pcmr10-master", },
+	{ .name = "clk-usb2-phy", },
+};
+
+static const struct clkgen_data clkgen_stih410_d0 = {
+	.flags = CLK_SET_RATE_PARENT,
+	.outputs = clkgen_stih410_d0_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih410_d0_clk_out),
+};
+
+static const struct clkgen_clk_out clkgen_stih407_d2_clk_out[] = {
+	{ .name = "clk-pix-main-disp", },
+	{ .name = "clk-pix-pip", },
+	{ .name = "clk-pix-gdp1", },
+	{ .name = "clk-pix-gdp2", },
+	{ .name = "clk-pix-gdp3", },
+	{ .name = "clk-pix-gdp4", },
+	{ .name = "clk-pix-aux-disp", },
+	{ .name = "clk-denc", },
+	{ .name = "clk-pix-hddac", },
+	{ .name = "clk-hddac", },
+	{ .name = "clk-sddac", },
+	{ .name = "clk-pix-dvo", },
+	{ .name = "clk-dvo", },
+	{ .name = "clk-pix-hdmi", },
+	{ .name = "clk-tmds-hdmi", },
+	{ .name = "clk-ref-hdmiphy", },
+};
+
+static const struct clkgen_data clkgen_stih407_d2 = {
+	.outputs = clkgen_stih407_d2_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih407_d2_clk_out),
+	.flags = CLK_SET_RATE_PARENT,
+	.mode = 1,
+};
+
+static const struct clkgen_clk_out clkgen_stih418_d2_clk_out[] = {
+	{ .name = "clk-pix-main-disp", },
+	{ .name = "", },
+	{ .name = "", },
+	{ .name = "", },
+	{ .name = "", },
+	{ .name = "clk-tmds-hdmi-div2", },
+	{ .name = "clk-pix-aux-disp", },
+	{ .name = "clk-denc", },
+	{ .name = "clk-pix-hddac", },
+	{ .name = "clk-hddac", },
+	{ .name = "clk-sddac", },
+	{ .name = "clk-pix-dvo", },
+	{ .name = "clk-dvo", },
+	{ .name = "clk-pix-hdmi", },
+	{ .name = "clk-tmds-hdmi", },
+	{ .name = "clk-ref-hdmiphy", },
+	{ .name = "", }, { .name = "", }, { .name = "", }, { .name = "", },
+	{ .name = "", }, { .name = "", }, { .name = "", }, { .name = "", },
+	{ .name = "", }, { .name = "", }, { .name = "", }, { .name = "", },
+	{ .name = "", }, { .name = "", }, { .name = "", }, { .name = "", },
+	{ .name = "", }, { .name = "", }, { .name = "", }, { .name = "", },
+	{ .name = "", }, { .name = "", }, { .name = "", }, { .name = "", },
+	{ .name = "", }, { .name = "", }, { .name = "", }, { .name = "", },
+	{ .name = "", }, { .name = "", }, { .name = "", },
+	{ .name = "clk-vp9", },
+};
+
+static const struct clkgen_data clkgen_stih418_d2 = {
+	.outputs = clkgen_stih418_d2_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih418_d2_clk_out),
+	.flags = CLK_SET_RATE_PARENT,
+	.mode = 1,
+};
+
+static const struct clkgen_clk_out clkgen_stih407_d3_clk_out[] = {
+	{ .name = "clk-stfe-frc1", },
+	{ .name = "clk-tsout-0", },
+	{ .name = "clk-tsout-1", },
+	{ .name = "clk-mchi", },
+	{ .name = "clk-vsens-compo", },
+	{ .name = "clk-frc1-remote", },
+	{ .name = "clk-lpc-0", },
+	{ .name = "clk-lpc-1", },
+};
+
+static const struct clkgen_data clkgen_stih407_d3 = {
+	.outputs = clkgen_stih407_d3_clk_out,
+	.outputs_nb = ARRAY_SIZE(clkgen_stih407_d3_clk_out),
+};
+
+static const struct of_device_id flexgen_of_match[] = {
+	{
+		.compatible = "st,flexgen-audio",
+		.data = &clkgen_audio,
+	},
+	{
+		.compatible = "st,flexgen-video",
+		.data = &clkgen_video,
+	},
+	{
+		.compatible = "st,flexgen-stih407-a0",
+		.data = &clkgen_stih407_a0,
+	},
+	{
+		.compatible = "st,flexgen-stih410-a0",
+		.data = &clkgen_stih410_a0,
+	},
+	{
+		.compatible = "st,flexgen-stih407-c0",
+		.data = &clkgen_stih407_c0,
+	},
+	{
+		.compatible = "st,flexgen-stih410-c0",
+		.data = &clkgen_stih410_c0,
+	},
+	{
+		.compatible = "st,flexgen-stih418-c0",
+		.data = &clkgen_stih418_c0,
+	},
+	{
+		.compatible = "st,flexgen-stih407-d0",
+		.data = &clkgen_stih407_d0,
+	},
+	{
+		.compatible = "st,flexgen-stih410-d0",
+		.data = &clkgen_stih410_d0,
+	},
+	{
+		.compatible = "st,flexgen-stih407-d2",
+		.data = &clkgen_stih407_d2,
+	},
+	{
+		.compatible = "st,flexgen-stih418-d2",
+		.data = &clkgen_stih418_d2,
+	},
+	{
+		.compatible = "st,flexgen-stih407-d3",
+		.data = &clkgen_stih407_d3,
+	},
+	{}
+};
+
+static void __init st_of_flexgen_setup(struct device_node *np)
+{
+	struct device_node *pnode;
+	void __iomem *reg;
+	struct clk_onecell_data *clk_data;
+	const char **parents;
+	int num_parents, i;
+	spinlock_t *rlock = NULL;
+	const struct of_device_id *match;
+	struct clkgen_data *data = NULL;
+	unsigned long flex_flags = 0;
+	int ret;
+	bool clk_mode = 0;
+	const char *clk_name;
+
+	pnode = of_get_parent(np);
+	if (!pnode)
+		return;
+
+	reg = of_iomap(pnode, 0);
+	of_node_put(pnode);
+	if (!reg)
+		return;
+
+	parents = flexgen_get_parents(np, &num_parents);
+	if (!parents) {
+		iounmap(reg);
+		return;
+	}
+
+	match = of_match_node(flexgen_of_match, np);
+	if (match) {
+		data = (struct clkgen_data *)match->data;
+		flex_flags = data->flags;
+		clk_mode = data->mode;
+	}
+
+	clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
+	if (!clk_data)
+		goto err;
+
+	/* First try to get output information from the compatible data */
+	if (!data || !data->outputs_nb || !data->outputs) {
+		ret = of_property_count_strings(np, "clock-output-names");
+		if (ret <= 0) {
+			pr_err("%s: Failed to get number of output clocks (%d)",
+					__func__, clk_data->clk_num);
+			goto err;
+		}
+		clk_data->clk_num = ret;
+	} else
+		clk_data->clk_num = data->outputs_nb;
+
+	clk_data->clks = kcalloc(clk_data->clk_num, sizeof(struct clk *),
+			GFP_KERNEL);
+	if (!clk_data->clks)
+		goto err;
+
+	rlock = kzalloc(sizeof(spinlock_t), GFP_KERNEL);
+	if (!rlock)
+		goto err;
+
+	spin_lock_init(rlock);
+
+	for (i = 0; i < clk_data->clk_num; i++) {
+		struct clk *clk;
+
+		if (!data || !data->outputs_nb || !data->outputs) {
+			if (of_property_read_string_index(np,
+							  "clock-output-names",
+							  i, &clk_name))
+				break;
+			flex_flags &= ~CLK_IS_CRITICAL;
+			of_clk_detect_critical(np, i, &flex_flags);
+		} else {
+			clk_name = data->outputs[i].name;
+			flex_flags = data->flags | data->outputs[i].flags;
+		}
+
+		/*
+		 * If we read an empty clock name then the output is unused
+		 */
+		if (*clk_name == '\0')
+			continue;
+
+		clk = clk_register_flexgen(clk_name, parents, num_parents,
+					   reg, rlock, i, flex_flags, clk_mode);
+
+		if (IS_ERR(clk))
+			goto err;
+
+		clk_data->clks[i] = clk;
+	}
+
+	kfree(parents);
+	of_clk_add_provider(np, of_clk_src_onecell_get, clk_data);
+
+	return;
+
+err:
+	iounmap(reg);
+	if (clk_data)
+		kfree(clk_data->clks);
+	kfree(clk_data);
+	kfree(parents);
+	kfree(rlock);
+}
+CLK_OF_DECLARE(flexgen, "st,flexgen", st_of_flexgen_setup);