Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1167 insertions, 0 deletions

diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
new file mode 100644
index 000000000..5fe7049ea
--- /dev/null
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -0,0 +1,1167 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/log2.h>
+
+#include "clk-factors.h"
+
+static DEFINE_SPINLOCK(clk_lock);
+
+/* Maximum number of parents our clocks have */
+#define SUNXI_MAX_PARENTS	5
+
+/*
+ * sun4i_get_pll1_factors() - calculates n, k, m, p factors for PLL1
+ * PLL1 rate is calculated as follows
+ * rate = (parent_rate * n * (k + 1) >> p) / (m + 1);
+ * parent_rate is always 24Mhz
+ */
+
+static void sun4i_get_pll1_factors(struct factors_request *req)
+{
+	u8 div;
+
+	/* Normalize value to a 6M multiple */
+	div = req->rate / 6000000;
+	req->rate = 6000000 * div;
+
+	/* m is always zero for pll1 */
+	req->m = 0;
+
+	/* k is 1 only on these cases */
+	if (req->rate >= 768000000 || req->rate == 42000000 ||
+			req->rate == 54000000)
+		req->k = 1;
+	else
+		req->k = 0;
+
+	/* p will be 3 for divs under 10 */
+	if (div < 10)
+		req->p = 3;
+
+	/* p will be 2 for divs between 10 - 20 and odd divs under 32 */
+	else if (div < 20 || (div < 32 && (div & 1)))
+		req->p = 2;
+
+	/* p will be 1 for even divs under 32, divs under 40 and odd pairs
+	 * of divs between 40-62 */
+	else if (div < 40 || (div < 64 && (div & 2)))
+		req->p = 1;
+
+	/* any other entries have p = 0 */
+	else
+		req->p = 0;
+
+	/* calculate a suitable n based on k and p */
+	div <<= req->p;
+	div /= (req->k + 1);
+	req->n = div / 4;
+}
+
+/*
+ * sun6i_a31_get_pll1_factors() - calculates n, k and m factors for PLL1
+ * PLL1 rate is calculated as follows
+ * rate = parent_rate * (n + 1) * (k + 1) / (m + 1);
+ * parent_rate should always be 24MHz
+ */
+static void sun6i_a31_get_pll1_factors(struct factors_request *req)
+{
+	/*
+	 * We can operate only on MHz, this will make our life easier
+	 * later.
+	 */
+	u32 freq_mhz = req->rate / 1000000;
+	u32 parent_freq_mhz = req->parent_rate / 1000000;
+
+	/*
+	 * Round down the frequency to the closest multiple of either
+	 * 6 or 16
+	 */
+	u32 round_freq_6 = rounddown(freq_mhz, 6);
+	u32 round_freq_16 = round_down(freq_mhz, 16);
+
+	if (round_freq_6 > round_freq_16)
+		freq_mhz = round_freq_6;
+	else
+		freq_mhz = round_freq_16;
+
+	req->rate = freq_mhz * 1000000;
+
+	/* If the frequency is a multiple of 32 MHz, k is always 3 */
+	if (!(freq_mhz % 32))
+		req->k = 3;
+	/* If the frequency is a multiple of 9 MHz, k is always 2 */
+	else if (!(freq_mhz % 9))
+		req->k = 2;
+	/* If the frequency is a multiple of 8 MHz, k is always 1 */
+	else if (!(freq_mhz % 8))
+		req->k = 1;
+	/* Otherwise, we don't use the k factor */
+	else
+		req->k = 0;
+
+	/*
+	 * If the frequency is a multiple of 2 but not a multiple of
+	 * 3, m is 3. This is the first time we use 6 here, yet we
+	 * will use it on several other places.
+	 * We use this number because it's the lowest frequency we can
+	 * generate (with n = 0, k = 0, m = 3), so every other frequency
+	 * somehow relates to this frequency.
+	 */
+	if ((freq_mhz % 6) == 2 || (freq_mhz % 6) == 4)
+		req->m = 2;
+	/*
+	 * If the frequency is a multiple of 6MHz, but the factor is
+	 * odd, m will be 3
+	 */
+	else if ((freq_mhz / 6) & 1)
+		req->m = 3;
+	/* Otherwise, we end up with m = 1 */
+	else
+		req->m = 1;
+
+	/* Calculate n thanks to the above factors we already got */
+	req->n = freq_mhz * (req->m + 1) / ((req->k + 1) * parent_freq_mhz)
+		 - 1;
+
+	/*
+	 * If n end up being outbound, and that we can still decrease
+	 * m, do it.
+	 */
+	if ((req->n + 1) > 31 && (req->m + 1) > 1) {
+		req->n = (req->n + 1) / 2 - 1;
+		req->m = (req->m + 1) / 2 - 1;
+	}
+}
+
+/*
+ * sun8i_a23_get_pll1_factors() - calculates n, k, m, p factors for PLL1
+ * PLL1 rate is calculated as follows
+ * rate = (parent_rate * (n + 1) * (k + 1) >> p) / (m + 1);
+ * parent_rate is always 24Mhz
+ */
+
+static void sun8i_a23_get_pll1_factors(struct factors_request *req)
+{
+	u8 div;
+
+	/* Normalize value to a 6M multiple */
+	div = req->rate / 6000000;
+	req->rate = 6000000 * div;
+
+	/* m is always zero for pll1 */
+	req->m = 0;
+
+	/* k is 1 only on these cases */
+	if (req->rate >= 768000000 || req->rate == 42000000 ||
+			req->rate == 54000000)
+		req->k = 1;
+	else
+		req->k = 0;
+
+	/* p will be 2 for divs under 20 and odd divs under 32 */
+	if (div < 20 || (div < 32 && (div & 1)))
+		req->p = 2;
+
+	/* p will be 1 for even divs under 32, divs under 40 and odd pairs
+	 * of divs between 40-62 */
+	else if (div < 40 || (div < 64 && (div & 2)))
+		req->p = 1;
+
+	/* any other entries have p = 0 */
+	else
+		req->p = 0;
+
+	/* calculate a suitable n based on k and p */
+	div <<= req->p;
+	div /= (req->k + 1);
+	req->n = div / 4 - 1;
+}
+
+/*
+ * sun4i_get_pll5_factors() - calculates n, k factors for PLL5
+ * PLL5 rate is calculated as follows
+ * rate = parent_rate * n * (k + 1)
+ * parent_rate is always 24Mhz
+ */
+
+static void sun4i_get_pll5_factors(struct factors_request *req)
+{
+	u8 div;
+
+	/* Normalize value to a parent_rate multiple (24M) */
+	div = req->rate / req->parent_rate;
+	req->rate = req->parent_rate * div;
+
+	if (div < 31)
+		req->k = 0;
+	else if (div / 2 < 31)
+		req->k = 1;
+	else if (div / 3 < 31)
+		req->k = 2;
+	else
+		req->k = 3;
+
+	req->n = DIV_ROUND_UP(div, (req->k + 1));
+}
+
+/*
+ * sun6i_a31_get_pll6_factors() - calculates n, k factors for A31 PLL6x2
+ * PLL6x2 rate is calculated as follows
+ * rate = parent_rate * (n + 1) * (k + 1)
+ * parent_rate is always 24Mhz
+ */
+
+static void sun6i_a31_get_pll6_factors(struct factors_request *req)
+{
+	u8 div;
+
+	/* Normalize value to a parent_rate multiple (24M) */
+	div = req->rate / req->parent_rate;
+	req->rate = req->parent_rate * div;
+
+	req->k = div / 32;
+	if (req->k > 3)
+		req->k = 3;
+
+	req->n = DIV_ROUND_UP(div, (req->k + 1)) - 1;
+}
+
+/*
+ * sun5i_a13_get_ahb_factors() - calculates m, p factors for AHB
+ * AHB rate is calculated as follows
+ * rate = parent_rate >> p
+ */
+
+static void sun5i_a13_get_ahb_factors(struct factors_request *req)
+{
+	u32 div;
+
+	/* divide only */
+	if (req->parent_rate < req->rate)
+		req->rate = req->parent_rate;
+
+	/*
+	 * user manual says valid speed is 8k ~ 276M, but tests show it
+	 * can work at speeds up to 300M, just after reparenting to pll6
+	 */
+	if (req->rate < 8000)
+		req->rate = 8000;
+	if (req->rate > 300000000)
+		req->rate = 300000000;
+
+	div = order_base_2(DIV_ROUND_UP(req->parent_rate, req->rate));
+
+	/* p = 0 ~ 3 */
+	if (div > 3)
+		div = 3;
+
+	req->rate = req->parent_rate >> div;
+
+	req->p = div;
+}
+
+#define SUN6I_AHB1_PARENT_PLL6	3
+
+/*
+ * sun6i_a31_get_ahb_factors() - calculates m, p factors for AHB
+ * AHB rate is calculated as follows
+ * rate = parent_rate >> p
+ *
+ * if parent is pll6, then
+ * parent_rate = pll6 rate / (m + 1)
+ */
+
+static void sun6i_get_ahb1_factors(struct factors_request *req)
+{
+	u8 div, calcp, calcm = 1;
+
+	/*
+	 * clock can only divide, so we will never be able to achieve
+	 * frequencies higher than the parent frequency
+	 */
+	if (req->parent_rate && req->rate > req->parent_rate)
+		req->rate = req->parent_rate;
+
+	div = DIV_ROUND_UP(req->parent_rate, req->rate);
+
+	/* calculate pre-divider if parent is pll6 */
+	if (req->parent_index == SUN6I_AHB1_PARENT_PLL6) {
+		if (div < 4)
+			calcp = 0;
+		else if (div / 2 < 4)
+			calcp = 1;
+		else if (div / 4 < 4)
+			calcp = 2;
+		else
+			calcp = 3;
+
+		calcm = DIV_ROUND_UP(div, 1 << calcp);
+	} else {
+		calcp = __roundup_pow_of_two(div);
+		calcp = calcp > 3 ? 3 : calcp;
+	}
+
+	req->rate = (req->parent_rate / calcm) >> calcp;
+	req->p = calcp;
+	req->m = calcm - 1;
+}
+
+/*
+ * sun6i_ahb1_recalc() - calculates AHB clock rate from m, p factors and
+ *			 parent index
+ */
+static void sun6i_ahb1_recalc(struct factors_request *req)
+{
+	req->rate = req->parent_rate;
+
+	/* apply pre-divider first if parent is pll6 */
+	if (req->parent_index == SUN6I_AHB1_PARENT_PLL6)
+		req->rate /= req->m + 1;
+
+	/* clk divider */
+	req->rate >>= req->p;
+}
+
+/*
+ * sun4i_get_apb1_factors() - calculates m, p factors for APB1
+ * APB1 rate is calculated as follows
+ * rate = (parent_rate >> p) / (m + 1);
+ */
+
+static void sun4i_get_apb1_factors(struct factors_request *req)
+{
+	u8 calcm, calcp;
+	int div;
+
+	if (req->parent_rate < req->rate)
+		req->rate = req->parent_rate;
+
+	div = DIV_ROUND_UP(req->parent_rate, req->rate);
+
+	/* Invalid rate! */
+	if (div > 32)
+		return;
+
+	if (div <= 4)
+		calcp = 0;
+	else if (div <= 8)
+		calcp = 1;
+	else if (div <= 16)
+		calcp = 2;
+	else
+		calcp = 3;
+
+	calcm = (div >> calcp) - 1;
+
+	req->rate = (req->parent_rate >> calcp) / (calcm + 1);
+	req->m = calcm;
+	req->p = calcp;
+}
+
+
+
+
+/*
+ * sun7i_a20_get_out_factors() - calculates m, p factors for CLK_OUT_A/B
+ * CLK_OUT rate is calculated as follows
+ * rate = (parent_rate >> p) / (m + 1);
+ */
+
+static void sun7i_a20_get_out_factors(struct factors_request *req)
+{
+	u8 div, calcm, calcp;
+
+	/* These clocks can only divide, so we will never be able to achieve
+	 * frequencies higher than the parent frequency */
+	if (req->rate > req->parent_rate)
+		req->rate = req->parent_rate;
+
+	div = DIV_ROUND_UP(req->parent_rate, req->rate);
+
+	if (div < 32)
+		calcp = 0;
+	else if (div / 2 < 32)
+		calcp = 1;
+	else if (div / 4 < 32)
+		calcp = 2;
+	else
+		calcp = 3;
+
+	calcm = DIV_ROUND_UP(div, 1 << calcp);
+
+	req->rate = (req->parent_rate >> calcp) / calcm;
+	req->m = calcm - 1;
+	req->p = calcp;
+}
+
+/*
+ * sunxi_factors_clk_setup() - Setup function for factor clocks
+ */
+
+static const struct clk_factors_config sun4i_pll1_config = {
+	.nshift = 8,
+	.nwidth = 5,
+	.kshift = 4,
+	.kwidth = 2,
+	.mshift = 0,
+	.mwidth = 2,
+	.pshift = 16,
+	.pwidth = 2,
+};
+
+static const struct clk_factors_config sun6i_a31_pll1_config = {
+	.nshift	= 8,
+	.nwidth = 5,
+	.kshift = 4,
+	.kwidth = 2,
+	.mshift = 0,
+	.mwidth = 2,
+	.n_start = 1,
+};
+
+static const struct clk_factors_config sun8i_a23_pll1_config = {
+	.nshift = 8,
+	.nwidth = 5,
+	.kshift = 4,
+	.kwidth = 2,
+	.mshift = 0,
+	.mwidth = 2,
+	.pshift = 16,
+	.pwidth = 2,
+	.n_start = 1,
+};
+
+static const struct clk_factors_config sun4i_pll5_config = {
+	.nshift = 8,
+	.nwidth = 5,
+	.kshift = 4,
+	.kwidth = 2,
+};
+
+static const struct clk_factors_config sun6i_a31_pll6_config = {
+	.nshift	= 8,
+	.nwidth = 5,
+	.kshift = 4,
+	.kwidth = 2,
+	.n_start = 1,
+};
+
+static const struct clk_factors_config sun5i_a13_ahb_config = {
+	.pshift = 4,
+	.pwidth = 2,
+};
+
+static const struct clk_factors_config sun6i_ahb1_config = {
+	.mshift = 6,
+	.mwidth = 2,
+	.pshift = 4,
+	.pwidth = 2,
+};
+
+static const struct clk_factors_config sun4i_apb1_config = {
+	.mshift = 0,
+	.mwidth = 5,
+	.pshift = 16,
+	.pwidth = 2,
+};
+
+/* user manual says "n" but it's really "p" */
+static const struct clk_factors_config sun7i_a20_out_config = {
+	.mshift = 8,
+	.mwidth = 5,
+	.pshift = 20,
+	.pwidth = 2,
+};
+
+static const struct factors_data sun4i_pll1_data __initconst = {
+	.enable = 31,
+	.table = &sun4i_pll1_config,
+	.getter = sun4i_get_pll1_factors,
+};
+
+static const struct factors_data sun6i_a31_pll1_data __initconst = {
+	.enable = 31,
+	.table = &sun6i_a31_pll1_config,
+	.getter = sun6i_a31_get_pll1_factors,
+};
+
+static const struct factors_data sun8i_a23_pll1_data __initconst = {
+	.enable = 31,
+	.table = &sun8i_a23_pll1_config,
+	.getter = sun8i_a23_get_pll1_factors,
+};
+
+static const struct factors_data sun7i_a20_pll4_data __initconst = {
+	.enable = 31,
+	.table = &sun4i_pll5_config,
+	.getter = sun4i_get_pll5_factors,
+};
+
+static const struct factors_data sun4i_pll5_data __initconst = {
+	.enable = 31,
+	.table = &sun4i_pll5_config,
+	.getter = sun4i_get_pll5_factors,
+};
+
+static const struct factors_data sun6i_a31_pll6_data __initconst = {
+	.enable = 31,
+	.table = &sun6i_a31_pll6_config,
+	.getter = sun6i_a31_get_pll6_factors,
+};
+
+static const struct factors_data sun5i_a13_ahb_data __initconst = {
+	.mux = 6,
+	.muxmask = BIT(1) | BIT(0),
+	.table = &sun5i_a13_ahb_config,
+	.getter = sun5i_a13_get_ahb_factors,
+};
+
+static const struct factors_data sun6i_ahb1_data __initconst = {
+	.mux = 12,
+	.muxmask = BIT(1) | BIT(0),
+	.table = &sun6i_ahb1_config,
+	.getter = sun6i_get_ahb1_factors,
+	.recalc = sun6i_ahb1_recalc,
+};
+
+static const struct factors_data sun4i_apb1_data __initconst = {
+	.mux = 24,
+	.muxmask = BIT(1) | BIT(0),
+	.table = &sun4i_apb1_config,
+	.getter = sun4i_get_apb1_factors,
+};
+
+static const struct factors_data sun7i_a20_out_data __initconst = {
+	.enable = 31,
+	.mux = 24,
+	.muxmask = BIT(1) | BIT(0),
+	.table = &sun7i_a20_out_config,
+	.getter = sun7i_a20_get_out_factors,
+};
+
+static struct clk * __init sunxi_factors_clk_setup(struct device_node *node,
+						   const struct factors_data *data)
+{
+	void __iomem *reg;
+
+	reg = of_iomap(node, 0);
+	if (!reg) {
+		pr_err("Could not get registers for factors-clk: %pOFn\n",
+		       node);
+		return NULL;
+	}
+
+	return sunxi_factors_register(node, data, &clk_lock, reg);
+}
+
+static void __init sun4i_pll1_clk_setup(struct device_node *node)
+{
+	sunxi_factors_clk_setup(node, &sun4i_pll1_data);
+}
+CLK_OF_DECLARE(sun4i_pll1, "allwinner,sun4i-a10-pll1-clk",
+	       sun4i_pll1_clk_setup);
+
+static void __init sun6i_pll1_clk_setup(struct device_node *node)
+{
+	sunxi_factors_clk_setup(node, &sun6i_a31_pll1_data);
+}
+CLK_OF_DECLARE(sun6i_pll1, "allwinner,sun6i-a31-pll1-clk",
+	       sun6i_pll1_clk_setup);
+
+static void __init sun8i_pll1_clk_setup(struct device_node *node)
+{
+	sunxi_factors_clk_setup(node, &sun8i_a23_pll1_data);
+}
+CLK_OF_DECLARE(sun8i_pll1, "allwinner,sun8i-a23-pll1-clk",
+	       sun8i_pll1_clk_setup);
+
+static void __init sun7i_pll4_clk_setup(struct device_node *node)
+{
+	sunxi_factors_clk_setup(node, &sun7i_a20_pll4_data);
+}
+CLK_OF_DECLARE(sun7i_pll4, "allwinner,sun7i-a20-pll4-clk",
+	       sun7i_pll4_clk_setup);
+
+static void __init sun5i_ahb_clk_setup(struct device_node *node)
+{
+	sunxi_factors_clk_setup(node, &sun5i_a13_ahb_data);
+}
+CLK_OF_DECLARE(sun5i_ahb, "allwinner,sun5i-a13-ahb-clk",
+	       sun5i_ahb_clk_setup);
+
+static void __init sun6i_ahb1_clk_setup(struct device_node *node)
+{
+	sunxi_factors_clk_setup(node, &sun6i_ahb1_data);
+}
+CLK_OF_DECLARE(sun6i_a31_ahb1, "allwinner,sun6i-a31-ahb1-clk",
+	       sun6i_ahb1_clk_setup);
+
+static void __init sun4i_apb1_clk_setup(struct device_node *node)
+{
+	sunxi_factors_clk_setup(node, &sun4i_apb1_data);
+}
+CLK_OF_DECLARE(sun4i_apb1, "allwinner,sun4i-a10-apb1-clk",
+	       sun4i_apb1_clk_setup);
+
+static void __init sun7i_out_clk_setup(struct device_node *node)
+{
+	sunxi_factors_clk_setup(node, &sun7i_a20_out_data);
+}
+CLK_OF_DECLARE(sun7i_out, "allwinner,sun7i-a20-out-clk",
+	       sun7i_out_clk_setup);
+
+
+/*
+ * sunxi_mux_clk_setup() - Setup function for muxes
+ */
+
+#define SUNXI_MUX_GATE_WIDTH	2
+
+struct mux_data {
+	u8 shift;
+};
+
+static const struct mux_data sun4i_cpu_mux_data __initconst = {
+	.shift = 16,
+};
+
+static const struct mux_data sun6i_a31_ahb1_mux_data __initconst = {
+	.shift = 12,
+};
+
+static const struct mux_data sun8i_h3_ahb2_mux_data __initconst = {
+	.shift = 0,
+};
+
+static struct clk * __init sunxi_mux_clk_setup(struct device_node *node,
+					       const struct mux_data *data,
+					       unsigned long flags)
+{
+	struct clk *clk;
+	const char *clk_name = node->name;
+	const char *parents[SUNXI_MAX_PARENTS];
+	void __iomem *reg;
+	int i;
+
+	reg = of_iomap(node, 0);
+	if (!reg) {
+		pr_err("Could not map registers for mux-clk: %pOF\n", node);
+		return NULL;
+	}
+
+	i = of_clk_parent_fill(node, parents, SUNXI_MAX_PARENTS);
+	if (of_property_read_string(node, "clock-output-names", &clk_name)) {
+		pr_err("%s: could not read clock-output-names from \"%pOF\"\n",
+		       __func__, node);
+		goto out_unmap;
+	}
+
+	clk = clk_register_mux(NULL, clk_name, parents, i,
+			       CLK_SET_RATE_PARENT | flags, reg,
+			       data->shift, SUNXI_MUX_GATE_WIDTH,
+			       0, &clk_lock);
+
+	if (IS_ERR(clk)) {
+		pr_err("%s: failed to register mux clock %s: %ld\n", __func__,
+		       clk_name, PTR_ERR(clk));
+		goto out_unmap;
+	}
+
+	if (of_clk_add_provider(node, of_clk_src_simple_get, clk)) {
+		pr_err("%s: failed to add clock provider for %s\n",
+		       __func__, clk_name);
+		clk_unregister_divider(clk);
+		goto out_unmap;
+	}
+
+	return clk;
+out_unmap:
+	iounmap(reg);
+	return NULL;
+}
+
+static void __init sun4i_cpu_clk_setup(struct device_node *node)
+{
+	/* Protect CPU clock */
+	sunxi_mux_clk_setup(node, &sun4i_cpu_mux_data, CLK_IS_CRITICAL);
+}
+CLK_OF_DECLARE(sun4i_cpu, "allwinner,sun4i-a10-cpu-clk",
+	       sun4i_cpu_clk_setup);
+
+static void __init sun6i_ahb1_mux_clk_setup(struct device_node *node)
+{
+	sunxi_mux_clk_setup(node, &sun6i_a31_ahb1_mux_data, 0);
+}
+CLK_OF_DECLARE(sun6i_ahb1_mux, "allwinner,sun6i-a31-ahb1-mux-clk",
+	       sun6i_ahb1_mux_clk_setup);
+
+static void __init sun8i_ahb2_clk_setup(struct device_node *node)
+{
+	sunxi_mux_clk_setup(node, &sun8i_h3_ahb2_mux_data, 0);
+}
+CLK_OF_DECLARE(sun8i_ahb2, "allwinner,sun8i-h3-ahb2-clk",
+	       sun8i_ahb2_clk_setup);
+
+
+/*
+ * sunxi_divider_clk_setup() - Setup function for simple divider clocks
+ */
+
+struct div_data {
+	u8	shift;
+	u8	pow;
+	u8	width;
+	const struct clk_div_table *table;
+};
+
+static const struct div_data sun4i_axi_data __initconst = {
+	.shift	= 0,
+	.pow	= 0,
+	.width	= 2,
+};
+
+static const struct clk_div_table sun8i_a23_axi_table[] __initconst = {
+	{ .val = 0, .div = 1 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 3 },
+	{ .val = 3, .div = 4 },
+	{ .val = 4, .div = 4 },
+	{ .val = 5, .div = 4 },
+	{ .val = 6, .div = 4 },
+	{ .val = 7, .div = 4 },
+	{ } /* sentinel */
+};
+
+static const struct div_data sun8i_a23_axi_data __initconst = {
+	.width	= 3,
+	.table	= sun8i_a23_axi_table,
+};
+
+static const struct div_data sun4i_ahb_data __initconst = {
+	.shift	= 4,
+	.pow	= 1,
+	.width	= 2,
+};
+
+static const struct clk_div_table sun4i_apb0_table[] __initconst = {
+	{ .val = 0, .div = 2 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 8 },
+	{ } /* sentinel */
+};
+
+static const struct div_data sun4i_apb0_data __initconst = {
+	.shift	= 8,
+	.pow	= 1,
+	.width	= 2,
+	.table	= sun4i_apb0_table,
+};
+
+static void __init sunxi_divider_clk_setup(struct device_node *node,
+					   const struct div_data *data)
+{
+	struct clk *clk;
+	const char *clk_name = node->name;
+	const char *clk_parent;
+	void __iomem *reg;
+
+	reg = of_iomap(node, 0);
+	if (!reg) {
+		pr_err("Could not map registers for mux-clk: %pOF\n", node);
+		return;
+	}
+
+	clk_parent = of_clk_get_parent_name(node, 0);
+
+	if (of_property_read_string(node, "clock-output-names", &clk_name)) {
+		pr_err("%s: could not read clock-output-names from \"%pOF\"\n",
+		       __func__, node);
+		goto out_unmap;
+	}
+
+	clk = clk_register_divider_table(NULL, clk_name, clk_parent, 0,
+					 reg, data->shift, data->width,
+					 data->pow ? CLK_DIVIDER_POWER_OF_TWO : 0,
+					 data->table, &clk_lock);
+	if (IS_ERR(clk)) {
+		pr_err("%s: failed to register divider clock %s: %ld\n",
+		       __func__, clk_name, PTR_ERR(clk));
+		goto out_unmap;
+	}
+
+	if (of_clk_add_provider(node, of_clk_src_simple_get, clk)) {
+		pr_err("%s: failed to add clock provider for %s\n",
+		       __func__, clk_name);
+		goto out_unregister;
+	}
+
+	if (clk_register_clkdev(clk, clk_name, NULL)) {
+		of_clk_del_provider(node);
+		goto out_unregister;
+	}
+
+	return;
+out_unregister:
+	clk_unregister_divider(clk);
+
+out_unmap:
+	iounmap(reg);
+}
+
+static void __init sun4i_ahb_clk_setup(struct device_node *node)
+{
+	sunxi_divider_clk_setup(node, &sun4i_ahb_data);
+}
+CLK_OF_DECLARE(sun4i_ahb, "allwinner,sun4i-a10-ahb-clk",
+	       sun4i_ahb_clk_setup);
+
+static void __init sun4i_apb0_clk_setup(struct device_node *node)
+{
+	sunxi_divider_clk_setup(node, &sun4i_apb0_data);
+}
+CLK_OF_DECLARE(sun4i_apb0, "allwinner,sun4i-a10-apb0-clk",
+	       sun4i_apb0_clk_setup);
+
+static void __init sun4i_axi_clk_setup(struct device_node *node)
+{
+	sunxi_divider_clk_setup(node, &sun4i_axi_data);
+}
+CLK_OF_DECLARE(sun4i_axi, "allwinner,sun4i-a10-axi-clk",
+	       sun4i_axi_clk_setup);
+
+static void __init sun8i_axi_clk_setup(struct device_node *node)
+{
+	sunxi_divider_clk_setup(node, &sun8i_a23_axi_data);
+}
+CLK_OF_DECLARE(sun8i_axi, "allwinner,sun8i-a23-axi-clk",
+	       sun8i_axi_clk_setup);
+
+
+
+/*
+ * sunxi_gates_clk_setup() - Setup function for leaf gates on clocks
+ */
+
+#define SUNXI_GATES_MAX_SIZE	64
+
+struct gates_data {
+	DECLARE_BITMAP(mask, SUNXI_GATES_MAX_SIZE);
+};
+
+/*
+ * sunxi_divs_clk_setup() helper data
+ */
+
+#define SUNXI_DIVS_MAX_QTY	4
+#define SUNXI_DIVISOR_WIDTH	2
+
+struct divs_data {
+	const struct factors_data *factors; /* data for the factor clock */
+	int ndivs; /* number of outputs */
+	/*
+	 * List of outputs. Refer to the diagram for sunxi_divs_clk_setup():
+	 * self or base factor clock refers to the output from the pll
+	 * itself. The remaining refer to fixed or configurable divider
+	 * outputs.
+	 */
+	struct {
+		u8 self; /* is it the base factor clock? (only one) */
+		u8 fixed; /* is it a fixed divisor? if not... */
+		struct clk_div_table *table; /* is it a table based divisor? */
+		u8 shift; /* otherwise it's a normal divisor with this shift */
+		u8 pow;   /* is it power-of-two based? */
+		u8 gate;  /* is it independently gateable? */
+		bool critical;
+	} div[SUNXI_DIVS_MAX_QTY];
+};
+
+static struct clk_div_table pll6_sata_tbl[] = {
+	{ .val = 0, .div = 6, },
+	{ .val = 1, .div = 12, },
+	{ .val = 2, .div = 18, },
+	{ .val = 3, .div = 24, },
+	{ } /* sentinel */
+};
+
+static const struct divs_data pll5_divs_data __initconst = {
+	.factors = &sun4i_pll5_data,
+	.ndivs = 2,
+	.div = {
+		/* Protect PLL5_DDR */
+		{ .shift = 0, .pow = 0, .critical = true }, /* M, DDR */
+		{ .shift = 16, .pow = 1, }, /* P, other */
+		/* No output for the base factor clock */
+	}
+};
+
+static const struct divs_data pll6_divs_data __initconst = {
+	.factors = &sun4i_pll5_data,
+	.ndivs = 4,
+	.div = {
+		{ .shift = 0, .table = pll6_sata_tbl, .gate = 14 }, /* M, SATA */
+		{ .fixed = 2 }, /* P, other */
+		{ .self = 1 }, /* base factor clock, 2x */
+		{ .fixed = 4 }, /* pll6 / 4, used as ahb input */
+	}
+};
+
+static const struct divs_data sun6i_a31_pll6_divs_data __initconst = {
+	.factors = &sun6i_a31_pll6_data,
+	.ndivs = 2,
+	.div = {
+		{ .fixed = 2 }, /* normal output */
+		{ .self = 1 }, /* base factor clock, 2x */
+	}
+};
+
+/*
+ * sunxi_divs_clk_setup() - Setup function for leaf divisors on clocks
+ *
+ * These clocks look something like this
+ *            ________________________
+ *           |         ___divisor 1---|----> to consumer
+ * parent >--|  pll___/___divisor 2---|----> to consumer
+ *           |        \_______________|____> to consumer
+ *           |________________________|
+ */
+
+static struct clk ** __init sunxi_divs_clk_setup(struct device_node *node,
+						 const struct divs_data *data)
+{
+	struct clk_onecell_data *clk_data;
+	const char *parent;
+	const char *clk_name;
+	struct clk **clks, *pclk;
+	struct clk_hw *gate_hw, *rate_hw;
+	const struct clk_ops *rate_ops;
+	struct clk_gate *gate = NULL;
+	struct clk_fixed_factor *fix_factor;
+	struct clk_divider *divider;
+	struct factors_data factors = *data->factors;
+	char *derived_name = NULL;
+	void __iomem *reg;
+	int ndivs = SUNXI_DIVS_MAX_QTY, i = 0;
+	int flags, clkflags;
+
+	/* if number of children known, use it */
+	if (data->ndivs)
+		ndivs = data->ndivs;
+
+	/* Try to find a name for base factor clock */
+	for (i = 0; i < ndivs; i++) {
+		if (data->div[i].self) {
+			of_property_read_string_index(node, "clock-output-names",
+						      i, &factors.name);
+			break;
+		}
+	}
+	/* If we don't have a .self clk use the first output-name up to '_' */
+	if (factors.name == NULL) {
+		char *endp;
+
+		of_property_read_string_index(node, "clock-output-names",
+						      0, &clk_name);
+		endp = strchr(clk_name, '_');
+		if (endp) {
+			derived_name = kstrndup(clk_name, endp - clk_name,
+						GFP_KERNEL);
+			if (!derived_name)
+				return NULL;
+			factors.name = derived_name;
+		} else {
+			factors.name = clk_name;
+		}
+	}
+
+	/* Set up factor clock that we will be dividing */
+	pclk = sunxi_factors_clk_setup(node, &factors);
+	if (!pclk)
+		return NULL;
+
+	parent = __clk_get_name(pclk);
+	kfree(derived_name);
+
+	reg = of_iomap(node, 0);
+	if (!reg) {
+		pr_err("Could not map registers for divs-clk: %pOF\n", node);
+		return NULL;
+	}
+
+	clk_data = kmalloc(sizeof(struct clk_onecell_data), GFP_KERNEL);
+	if (!clk_data)
+		goto out_unmap;
+
+	clks = kcalloc(ndivs, sizeof(*clks), GFP_KERNEL);
+	if (!clks)
+		goto free_clkdata;
+
+	clk_data->clks = clks;
+
+	/* It's not a good idea to have automatic reparenting changing
+	 * our RAM clock! */
+	clkflags = !strcmp("pll5", parent) ? 0 : CLK_SET_RATE_PARENT;
+
+	for (i = 0; i < ndivs; i++) {
+		if (of_property_read_string_index(node, "clock-output-names",
+						  i, &clk_name) != 0)
+			break;
+
+		/* If this is the base factor clock, only update clks */
+		if (data->div[i].self) {
+			clk_data->clks[i] = pclk;
+			continue;
+		}
+
+		gate_hw = NULL;
+		rate_hw = NULL;
+		rate_ops = NULL;
+
+		/* If this leaf clock can be gated, create a gate */
+		if (data->div[i].gate) {
+			gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+			if (!gate)
+				goto free_clks;
+
+			gate->reg = reg;
+			gate->bit_idx = data->div[i].gate;
+			gate->lock = &clk_lock;
+
+			gate_hw = &gate->hw;
+		}
+
+		/* Leaves can be fixed or configurable divisors */
+		if (data->div[i].fixed) {
+			fix_factor = kzalloc(sizeof(*fix_factor), GFP_KERNEL);
+			if (!fix_factor)
+				goto free_gate;
+
+			fix_factor->mult = 1;
+			fix_factor->div = data->div[i].fixed;
+
+			rate_hw = &fix_factor->hw;
+			rate_ops = &clk_fixed_factor_ops;
+		} else {
+			divider = kzalloc(sizeof(*divider), GFP_KERNEL);
+			if (!divider)
+				goto free_gate;
+
+			flags = data->div[i].pow ? CLK_DIVIDER_POWER_OF_TWO : 0;
+
+			divider->reg = reg;
+			divider->shift = data->div[i].shift;
+			divider->width = SUNXI_DIVISOR_WIDTH;
+			divider->flags = flags;
+			divider->lock = &clk_lock;
+			divider->table = data->div[i].table;
+
+			rate_hw = &divider->hw;
+			rate_ops = &clk_divider_ops;
+		}
+
+		/* Wrap the (potential) gate and the divisor on a composite
+		 * clock to unify them */
+		clks[i] = clk_register_composite(NULL, clk_name, &parent, 1,
+						 NULL, NULL,
+						 rate_hw, rate_ops,
+						 gate_hw, &clk_gate_ops,
+						 clkflags |
+						 (data->div[i].critical ?
+							CLK_IS_CRITICAL : 0));
+
+		WARN_ON(IS_ERR(clk_data->clks[i]));
+	}
+
+	/* Adjust to the real max */
+	clk_data->clk_num = i;
+
+	if (of_clk_add_provider(node, of_clk_src_onecell_get, clk_data)) {
+		pr_err("%s: failed to add clock provider for %s\n",
+		       __func__, clk_name);
+		goto free_gate;
+	}
+
+	return clks;
+free_gate:
+	kfree(gate);
+free_clks:
+	kfree(clks);
+free_clkdata:
+	kfree(clk_data);
+out_unmap:
+	iounmap(reg);
+	return NULL;
+}
+
+static void __init sun4i_pll5_clk_setup(struct device_node *node)
+{
+	sunxi_divs_clk_setup(node, &pll5_divs_data);
+}
+CLK_OF_DECLARE(sun4i_pll5, "allwinner,sun4i-a10-pll5-clk",
+	       sun4i_pll5_clk_setup);
+
+static void __init sun4i_pll6_clk_setup(struct device_node *node)
+{
+	sunxi_divs_clk_setup(node, &pll6_divs_data);
+}
+CLK_OF_DECLARE(sun4i_pll6, "allwinner,sun4i-a10-pll6-clk",
+	       sun4i_pll6_clk_setup);
+
+static void __init sun6i_pll6_clk_setup(struct device_node *node)
+{
+	sunxi_divs_clk_setup(node, &sun6i_a31_pll6_divs_data);
+}
+CLK_OF_DECLARE(sun6i_pll6, "allwinner,sun6i-a31-pll6-clk",
+	       sun6i_pll6_clk_setup);
+
+/*
+ * sun6i display
+ *
+ * rate = parent_rate / (m + 1);
+ */
+static void sun6i_display_factors(struct factors_request *req)
+{
+	u8 m;
+
+	if (req->rate > req->parent_rate)
+		req->rate = req->parent_rate;
+
+	m = DIV_ROUND_UP(req->parent_rate, req->rate);
+
+	req->rate = req->parent_rate / m;
+	req->m = m - 1;
+}
+
+static const struct clk_factors_config sun6i_display_config = {
+	.mshift = 0,
+	.mwidth = 4,
+};
+
+static const struct factors_data sun6i_display_data __initconst = {
+	.enable = 31,
+	.mux = 24,
+	.muxmask = BIT(2) | BIT(1) | BIT(0),
+	.table = &sun6i_display_config,
+	.getter = sun6i_display_factors,
+};
+
+static void __init sun6i_display_setup(struct device_node *node)
+{
+	sunxi_factors_clk_setup(node, &sun6i_display_data);
+}
+CLK_OF_DECLARE(sun6i_display, "allwinner,sun6i-a31-display-clk",
+	       sun6i_display_setup);