Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 597 insertions, 0 deletions

diff --git a/drivers/edac/amd8111_edac.c b/drivers/edac/amd8111_edac.c
new file mode 100644
index 000000000..7508aa416
--- /dev/null
+++ b/drivers/edac/amd8111_edac.c
@@ -0,0 +1,597 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * amd8111_edac.c, AMD8111 Hyper Transport chip EDAC kernel module
+ *
+ * Copyright (c) 2008 Wind River Systems, Inc.
+ *
+ * Authors:	Cao Qingtao <qingtao.cao@windriver.com>
+ * 		Benjamin Walsh <benjamin.walsh@windriver.com>
+ * 		Hu Yongqi <yongqi.hu@windriver.com>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/edac.h>
+#include <linux/pci_ids.h>
+#include <asm/io.h>
+
+#include "edac_module.h"
+#include "amd8111_edac.h"
+
+#define AMD8111_EDAC_REVISION	" Ver: 1.0.0"
+#define AMD8111_EDAC_MOD_STR	"amd8111_edac"
+
+#define PCI_DEVICE_ID_AMD_8111_PCI	0x7460
+
+enum amd8111_edac_devs {
+	LPC_BRIDGE = 0,
+};
+
+enum amd8111_edac_pcis {
+	PCI_BRIDGE = 0,
+};
+
+/* Wrapper functions for accessing PCI configuration space */
+static int edac_pci_read_dword(struct pci_dev *dev, int reg, u32 *val32)
+{
+	int ret;
+
+	ret = pci_read_config_dword(dev, reg, val32);
+	if (ret != 0)
+		printk(KERN_ERR AMD8111_EDAC_MOD_STR
+			" PCI Access Read Error at 0x%x\n", reg);
+
+	return ret;
+}
+
+static void edac_pci_read_byte(struct pci_dev *dev, int reg, u8 *val8)
+{
+	int ret;
+
+	ret = pci_read_config_byte(dev, reg, val8);
+	if (ret != 0)
+		printk(KERN_ERR AMD8111_EDAC_MOD_STR
+			" PCI Access Read Error at 0x%x\n", reg);
+}
+
+static void edac_pci_write_dword(struct pci_dev *dev, int reg, u32 val32)
+{
+	int ret;
+
+	ret = pci_write_config_dword(dev, reg, val32);
+	if (ret != 0)
+		printk(KERN_ERR AMD8111_EDAC_MOD_STR
+			" PCI Access Write Error at 0x%x\n", reg);
+}
+
+static void edac_pci_write_byte(struct pci_dev *dev, int reg, u8 val8)
+{
+	int ret;
+
+	ret = pci_write_config_byte(dev, reg, val8);
+	if (ret != 0)
+		printk(KERN_ERR AMD8111_EDAC_MOD_STR
+			" PCI Access Write Error at 0x%x\n", reg);
+}
+
+/*
+ * device-specific methods for amd8111 PCI Bridge Controller
+ *
+ * Error Reporting and Handling for amd8111 chipset could be found
+ * in its datasheet 3.1.2 section, P37
+ */
+static void amd8111_pci_bridge_init(struct amd8111_pci_info *pci_info)
+{
+	u32 val32;
+	struct pci_dev *dev = pci_info->dev;
+
+	/* First clear error detection flags on the host interface */
+
+	/* Clear SSE/SMA/STA flags in the global status register*/
+	edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32);
+	if (val32 & PCI_STSCMD_CLEAR_MASK)
+		edac_pci_write_dword(dev, REG_PCI_STSCMD, val32);
+
+	/* Clear CRC and Link Fail flags in HT Link Control reg */
+	edac_pci_read_dword(dev, REG_HT_LINK, &val32);
+	if (val32 & HT_LINK_CLEAR_MASK)
+		edac_pci_write_dword(dev, REG_HT_LINK, val32);
+
+	/* Second clear all fault on the secondary interface */
+
+	/* Clear error flags in the memory-base limit reg. */
+	edac_pci_read_dword(dev, REG_MEM_LIM, &val32);
+	if (val32 & MEM_LIMIT_CLEAR_MASK)
+		edac_pci_write_dword(dev, REG_MEM_LIM, val32);
+
+	/* Clear Discard Timer Expired flag in Interrupt/Bridge Control reg */
+	edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32);
+	if (val32 & PCI_INTBRG_CTRL_CLEAR_MASK)
+		edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32);
+
+	/* Last enable error detections */
+	if (edac_op_state == EDAC_OPSTATE_POLL) {
+		/* Enable System Error reporting in global status register */
+		edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32);
+		val32 |= PCI_STSCMD_SERREN;
+		edac_pci_write_dword(dev, REG_PCI_STSCMD, val32);
+
+		/* Enable CRC Sync flood packets to HyperTransport Link */
+		edac_pci_read_dword(dev, REG_HT_LINK, &val32);
+		val32 |= HT_LINK_CRCFEN;
+		edac_pci_write_dword(dev, REG_HT_LINK, val32);
+
+		/* Enable SSE reporting etc in Interrupt control reg */
+		edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32);
+		val32 |= PCI_INTBRG_CTRL_POLL_MASK;
+		edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32);
+	}
+}
+
+static void amd8111_pci_bridge_exit(struct amd8111_pci_info *pci_info)
+{
+	u32 val32;
+	struct pci_dev *dev = pci_info->dev;
+
+	if (edac_op_state == EDAC_OPSTATE_POLL) {
+		/* Disable System Error reporting */
+		edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32);
+		val32 &= ~PCI_STSCMD_SERREN;
+		edac_pci_write_dword(dev, REG_PCI_STSCMD, val32);
+
+		/* Disable CRC flood packets */
+		edac_pci_read_dword(dev, REG_HT_LINK, &val32);
+		val32 &= ~HT_LINK_CRCFEN;
+		edac_pci_write_dword(dev, REG_HT_LINK, val32);
+
+		/* Disable DTSERREN/MARSP/SERREN in Interrupt Control reg */
+		edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32);
+		val32 &= ~PCI_INTBRG_CTRL_POLL_MASK;
+		edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32);
+	}
+}
+
+static void amd8111_pci_bridge_check(struct edac_pci_ctl_info *edac_dev)
+{
+	struct amd8111_pci_info *pci_info = edac_dev->pvt_info;
+	struct pci_dev *dev = pci_info->dev;
+	u32 val32;
+
+	/* Check out PCI Bridge Status and Command Register */
+	edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32);
+	if (val32 & PCI_STSCMD_CLEAR_MASK) {
+		printk(KERN_INFO "Error(s) in PCI bridge status and command"
+			"register on device %s\n", pci_info->ctl_name);
+		printk(KERN_INFO "SSE: %d, RMA: %d, RTA: %d\n",
+			(val32 & PCI_STSCMD_SSE) != 0,
+			(val32 & PCI_STSCMD_RMA) != 0,
+			(val32 & PCI_STSCMD_RTA) != 0);
+
+		val32 |= PCI_STSCMD_CLEAR_MASK;
+		edac_pci_write_dword(dev, REG_PCI_STSCMD, val32);
+
+		edac_pci_handle_npe(edac_dev, edac_dev->ctl_name);
+	}
+
+	/* Check out HyperTransport Link Control Register */
+	edac_pci_read_dword(dev, REG_HT_LINK, &val32);
+	if (val32 & HT_LINK_LKFAIL) {
+		printk(KERN_INFO "Error(s) in hypertransport link control"
+			"register on device %s\n", pci_info->ctl_name);
+		printk(KERN_INFO "LKFAIL: %d\n",
+			(val32 & HT_LINK_LKFAIL) != 0);
+
+		val32 |= HT_LINK_LKFAIL;
+		edac_pci_write_dword(dev, REG_HT_LINK, val32);
+
+		edac_pci_handle_npe(edac_dev, edac_dev->ctl_name);
+	}
+
+	/* Check out PCI Interrupt and Bridge Control Register */
+	edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32);
+	if (val32 & PCI_INTBRG_CTRL_DTSTAT) {
+		printk(KERN_INFO "Error(s) in PCI interrupt and bridge control"
+			"register on device %s\n", pci_info->ctl_name);
+		printk(KERN_INFO "DTSTAT: %d\n",
+			(val32 & PCI_INTBRG_CTRL_DTSTAT) != 0);
+
+		val32 |= PCI_INTBRG_CTRL_DTSTAT;
+		edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32);
+
+		edac_pci_handle_npe(edac_dev, edac_dev->ctl_name);
+	}
+
+	/* Check out PCI Bridge Memory Base-Limit Register */
+	edac_pci_read_dword(dev, REG_MEM_LIM, &val32);
+	if (val32 & MEM_LIMIT_CLEAR_MASK) {
+		printk(KERN_INFO
+			"Error(s) in mem limit register on %s device\n",
+			pci_info->ctl_name);
+		printk(KERN_INFO "DPE: %d, RSE: %d, RMA: %d\n"
+			"RTA: %d, STA: %d, MDPE: %d\n",
+			(val32 & MEM_LIMIT_DPE)  != 0,
+			(val32 & MEM_LIMIT_RSE)  != 0,
+			(val32 & MEM_LIMIT_RMA)  != 0,
+			(val32 & MEM_LIMIT_RTA)  != 0,
+			(val32 & MEM_LIMIT_STA)  != 0,
+			(val32 & MEM_LIMIT_MDPE) != 0);
+
+		val32 |= MEM_LIMIT_CLEAR_MASK;
+		edac_pci_write_dword(dev, REG_MEM_LIM, val32);
+
+		edac_pci_handle_npe(edac_dev, edac_dev->ctl_name);
+	}
+}
+
+static struct resource *legacy_io_res;
+static int at_compat_reg_broken;
+#define LEGACY_NR_PORTS	1
+
+/* device-specific methods for amd8111 LPC Bridge device */
+static void amd8111_lpc_bridge_init(struct amd8111_dev_info *dev_info)
+{
+	u8 val8;
+	struct pci_dev *dev = dev_info->dev;
+
+	/* First clear REG_AT_COMPAT[SERR, IOCHK] if necessary */
+	legacy_io_res = request_region(REG_AT_COMPAT, LEGACY_NR_PORTS,
+					AMD8111_EDAC_MOD_STR);
+	if (!legacy_io_res)
+		printk(KERN_INFO "%s: failed to request legacy I/O region "
+			"start %d, len %d\n", __func__,
+			REG_AT_COMPAT, LEGACY_NR_PORTS);
+	else {
+		val8 = __do_inb(REG_AT_COMPAT);
+		if (val8 == 0xff) { /* buggy port */
+			printk(KERN_INFO "%s: port %d is buggy, not supported"
+				" by hardware?\n", __func__, REG_AT_COMPAT);
+			at_compat_reg_broken = 1;
+			release_region(REG_AT_COMPAT, LEGACY_NR_PORTS);
+			legacy_io_res = NULL;
+		} else {
+			u8 out8 = 0;
+			if (val8 & AT_COMPAT_SERR)
+				out8 = AT_COMPAT_CLRSERR;
+			if (val8 & AT_COMPAT_IOCHK)
+				out8 |= AT_COMPAT_CLRIOCHK;
+			if (out8 > 0)
+				__do_outb(out8, REG_AT_COMPAT);
+		}
+	}
+
+	/* Second clear error flags on LPC bridge */
+	edac_pci_read_byte(dev, REG_IO_CTRL_1, &val8);
+	if (val8 & IO_CTRL_1_CLEAR_MASK)
+		edac_pci_write_byte(dev, REG_IO_CTRL_1, val8);
+}
+
+static void amd8111_lpc_bridge_exit(struct amd8111_dev_info *dev_info)
+{
+	if (legacy_io_res)
+		release_region(REG_AT_COMPAT, LEGACY_NR_PORTS);
+}
+
+static void amd8111_lpc_bridge_check(struct edac_device_ctl_info *edac_dev)
+{
+	struct amd8111_dev_info *dev_info = edac_dev->pvt_info;
+	struct pci_dev *dev = dev_info->dev;
+	u8 val8;
+
+	edac_pci_read_byte(dev, REG_IO_CTRL_1, &val8);
+	if (val8 & IO_CTRL_1_CLEAR_MASK) {
+		printk(KERN_INFO
+			"Error(s) in IO control register on %s device\n",
+			dev_info->ctl_name);
+		printk(KERN_INFO "LPC ERR: %d, PW2LPC: %d\n",
+			(val8 & IO_CTRL_1_LPC_ERR) != 0,
+			(val8 & IO_CTRL_1_PW2LPC) != 0);
+
+		val8 |= IO_CTRL_1_CLEAR_MASK;
+		edac_pci_write_byte(dev, REG_IO_CTRL_1, val8);
+
+		edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name);
+	}
+
+	if (at_compat_reg_broken == 0) {
+		u8 out8 = 0;
+		val8 = __do_inb(REG_AT_COMPAT);
+		if (val8 & AT_COMPAT_SERR)
+			out8 = AT_COMPAT_CLRSERR;
+		if (val8 & AT_COMPAT_IOCHK)
+			out8 |= AT_COMPAT_CLRIOCHK;
+		if (out8 > 0) {
+			__do_outb(out8, REG_AT_COMPAT);
+			edac_device_handle_ue(edac_dev, 0, 0,
+						edac_dev->ctl_name);
+		}
+	}
+}
+
+/* General devices represented by edac_device_ctl_info */
+static struct amd8111_dev_info amd8111_devices[] = {
+	[LPC_BRIDGE] = {
+		.err_dev = PCI_DEVICE_ID_AMD_8111_LPC,
+		.ctl_name = "lpc",
+		.init = amd8111_lpc_bridge_init,
+		.exit = amd8111_lpc_bridge_exit,
+		.check = amd8111_lpc_bridge_check,
+	},
+	{0},
+};
+
+/* PCI controllers represented by edac_pci_ctl_info */
+static struct amd8111_pci_info amd8111_pcis[] = {
+	[PCI_BRIDGE] = {
+		.err_dev = PCI_DEVICE_ID_AMD_8111_PCI,
+		.ctl_name = "AMD8111_PCI_Controller",
+		.init = amd8111_pci_bridge_init,
+		.exit = amd8111_pci_bridge_exit,
+		.check = amd8111_pci_bridge_check,
+	},
+	{0},
+};
+
+static int amd8111_dev_probe(struct pci_dev *dev,
+				const struct pci_device_id *id)
+{
+	struct amd8111_dev_info *dev_info = &amd8111_devices[id->driver_data];
+	int ret = -ENODEV;
+
+	dev_info->dev = pci_get_device(PCI_VENDOR_ID_AMD,
+					dev_info->err_dev, NULL);
+
+	if (!dev_info->dev) {
+		printk(KERN_ERR "EDAC device not found:"
+			"vendor %x, device %x, name %s\n",
+			PCI_VENDOR_ID_AMD, dev_info->err_dev,
+			dev_info->ctl_name);
+		goto err;
+	}
+
+	if (pci_enable_device(dev_info->dev)) {
+		printk(KERN_ERR "failed to enable:"
+			"vendor %x, device %x, name %s\n",
+			PCI_VENDOR_ID_AMD, dev_info->err_dev,
+			dev_info->ctl_name);
+		goto err_dev_put;
+	}
+
+	/*
+	 * we do not allocate extra private structure for
+	 * edac_device_ctl_info, but make use of existing
+	 * one instead.
+	*/
+	dev_info->edac_idx = edac_device_alloc_index();
+	dev_info->edac_dev =
+		edac_device_alloc_ctl_info(0, dev_info->ctl_name, 1,
+					   NULL, 0, 0,
+					   NULL, 0, dev_info->edac_idx);
+	if (!dev_info->edac_dev) {
+		ret = -ENOMEM;
+		goto err_dev_put;
+	}
+
+	dev_info->edac_dev->pvt_info = dev_info;
+	dev_info->edac_dev->dev = &dev_info->dev->dev;
+	dev_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR;
+	dev_info->edac_dev->ctl_name = dev_info->ctl_name;
+	dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev);
+
+	if (edac_op_state == EDAC_OPSTATE_POLL)
+		dev_info->edac_dev->edac_check = dev_info->check;
+
+	if (dev_info->init)
+		dev_info->init(dev_info);
+
+	if (edac_device_add_device(dev_info->edac_dev) > 0) {
+		printk(KERN_ERR "failed to add edac_dev for %s\n",
+			dev_info->ctl_name);
+		goto err_edac_free_ctl;
+	}
+
+	printk(KERN_INFO "added one edac_dev on AMD8111 "
+		"vendor %x, device %x, name %s\n",
+		PCI_VENDOR_ID_AMD, dev_info->err_dev,
+		dev_info->ctl_name);
+
+	return 0;
+
+err_edac_free_ctl:
+	edac_device_free_ctl_info(dev_info->edac_dev);
+err_dev_put:
+	pci_dev_put(dev_info->dev);
+err:
+	return ret;
+}
+
+static void amd8111_dev_remove(struct pci_dev *dev)
+{
+	struct amd8111_dev_info *dev_info;
+
+	for (dev_info = amd8111_devices; dev_info->err_dev; dev_info++)
+		if (dev_info->dev->device == dev->device)
+			break;
+
+	if (!dev_info->err_dev)	/* should never happen */
+		return;
+
+	if (dev_info->edac_dev) {
+		edac_device_del_device(dev_info->edac_dev->dev);
+		edac_device_free_ctl_info(dev_info->edac_dev);
+	}
+
+	if (dev_info->exit)
+		dev_info->exit(dev_info);
+
+	pci_dev_put(dev_info->dev);
+}
+
+static int amd8111_pci_probe(struct pci_dev *dev,
+				const struct pci_device_id *id)
+{
+	struct amd8111_pci_info *pci_info = &amd8111_pcis[id->driver_data];
+	int ret = -ENODEV;
+
+	pci_info->dev = pci_get_device(PCI_VENDOR_ID_AMD,
+					pci_info->err_dev, NULL);
+
+	if (!pci_info->dev) {
+		printk(KERN_ERR "EDAC device not found:"
+			"vendor %x, device %x, name %s\n",
+			PCI_VENDOR_ID_AMD, pci_info->err_dev,
+			pci_info->ctl_name);
+		goto err;
+	}
+
+	if (pci_enable_device(pci_info->dev)) {
+		printk(KERN_ERR "failed to enable:"
+			"vendor %x, device %x, name %s\n",
+			PCI_VENDOR_ID_AMD, pci_info->err_dev,
+			pci_info->ctl_name);
+		goto err_dev_put;
+	}
+
+	/*
+	 * we do not allocate extra private structure for
+	 * edac_pci_ctl_info, but make use of existing
+	 * one instead.
+	*/
+	pci_info->edac_idx = edac_pci_alloc_index();
+	pci_info->edac_dev = edac_pci_alloc_ctl_info(0, pci_info->ctl_name);
+	if (!pci_info->edac_dev) {
+		ret = -ENOMEM;
+		goto err_dev_put;
+	}
+
+	pci_info->edac_dev->pvt_info = pci_info;
+	pci_info->edac_dev->dev = &pci_info->dev->dev;
+	pci_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR;
+	pci_info->edac_dev->ctl_name = pci_info->ctl_name;
+	pci_info->edac_dev->dev_name = dev_name(&pci_info->dev->dev);
+
+	if (edac_op_state == EDAC_OPSTATE_POLL)
+		pci_info->edac_dev->edac_check = pci_info->check;
+
+	if (pci_info->init)
+		pci_info->init(pci_info);
+
+	if (edac_pci_add_device(pci_info->edac_dev, pci_info->edac_idx) > 0) {
+		printk(KERN_ERR "failed to add edac_pci for %s\n",
+			pci_info->ctl_name);
+		goto err_edac_free_ctl;
+	}
+
+	printk(KERN_INFO "added one edac_pci on AMD8111 "
+		"vendor %x, device %x, name %s\n",
+		PCI_VENDOR_ID_AMD, pci_info->err_dev,
+		pci_info->ctl_name);
+
+	return 0;
+
+err_edac_free_ctl:
+	edac_pci_free_ctl_info(pci_info->edac_dev);
+err_dev_put:
+	pci_dev_put(pci_info->dev);
+err:
+	return ret;
+}
+
+static void amd8111_pci_remove(struct pci_dev *dev)
+{
+	struct amd8111_pci_info *pci_info;
+
+	for (pci_info = amd8111_pcis; pci_info->err_dev; pci_info++)
+		if (pci_info->dev->device == dev->device)
+			break;
+
+	if (!pci_info->err_dev)	/* should never happen */
+		return;
+
+	if (pci_info->edac_dev) {
+		edac_pci_del_device(pci_info->edac_dev->dev);
+		edac_pci_free_ctl_info(pci_info->edac_dev);
+	}
+
+	if (pci_info->exit)
+		pci_info->exit(pci_info);
+
+	pci_dev_put(pci_info->dev);
+}
+
+/* PCI Device ID talbe for general EDAC device */
+static const struct pci_device_id amd8111_edac_dev_tbl[] = {
+	{
+	PCI_VEND_DEV(AMD, 8111_LPC),
+	.subvendor = PCI_ANY_ID,
+	.subdevice = PCI_ANY_ID,
+	.class = 0,
+	.class_mask = 0,
+	.driver_data = LPC_BRIDGE,
+	},
+	{
+	0,
+	}			/* table is NULL-terminated */
+};
+MODULE_DEVICE_TABLE(pci, amd8111_edac_dev_tbl);
+
+static struct pci_driver amd8111_edac_dev_driver = {
+	.name = "AMD8111_EDAC_DEV",
+	.probe = amd8111_dev_probe,
+	.remove = amd8111_dev_remove,
+	.id_table = amd8111_edac_dev_tbl,
+};
+
+/* PCI Device ID table for EDAC PCI controller */
+static const struct pci_device_id amd8111_edac_pci_tbl[] = {
+	{
+	PCI_VEND_DEV(AMD, 8111_PCI),
+	.subvendor = PCI_ANY_ID,
+	.subdevice = PCI_ANY_ID,
+	.class = 0,
+	.class_mask = 0,
+	.driver_data = PCI_BRIDGE,
+	},
+	{
+	0,
+	}			/* table is NULL-terminated */
+};
+MODULE_DEVICE_TABLE(pci, amd8111_edac_pci_tbl);
+
+static struct pci_driver amd8111_edac_pci_driver = {
+	.name = "AMD8111_EDAC_PCI",
+	.probe = amd8111_pci_probe,
+	.remove = amd8111_pci_remove,
+	.id_table = amd8111_edac_pci_tbl,
+};
+
+static int __init amd8111_edac_init(void)
+{
+	int val;
+
+	printk(KERN_INFO "AMD8111 EDAC driver "	AMD8111_EDAC_REVISION "\n");
+	printk(KERN_INFO "\t(c) 2008 Wind River Systems, Inc.\n");
+
+	/* Only POLL mode supported so far */
+	edac_op_state = EDAC_OPSTATE_POLL;
+
+	val = pci_register_driver(&amd8111_edac_dev_driver);
+	val |= pci_register_driver(&amd8111_edac_pci_driver);
+
+	return val;
+}
+
+static void __exit amd8111_edac_exit(void)
+{
+	pci_unregister_driver(&amd8111_edac_pci_driver);
+	pci_unregister_driver(&amd8111_edac_dev_driver);
+}
+
+
+module_init(amd8111_edac_init);
+module_exit(amd8111_edac_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cao Qingtao <qingtao.cao@windriver.com>\n");
+MODULE_DESCRIPTION("AMD8111 HyperTransport I/O Hub EDAC kernel module");