Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 258 insertions, 0 deletions

diff --git a/drivers/firmware/broadcom/bcm47xx_nvram.c b/drivers/firmware/broadcom/bcm47xx_nvram.c
new file mode 100644
index 000000000..5f47dbf48
--- /dev/null
+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * BCM947xx nvram variable access
+ *
+ * Copyright (C) 2005 Broadcom Corporation
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
+ */
+
+#include <linux/io.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mtd/mtd.h>
+#include <linux/bcm47xx_nvram.h>
+
+#define NVRAM_MAGIC			0x48534C46	/* 'FLSH' */
+#define NVRAM_SPACE			0x10000
+#define NVRAM_MAX_GPIO_ENTRIES		32
+#define NVRAM_MAX_GPIO_VALUE_LEN	30
+
+#define FLASH_MIN		0x00020000	/* Minimum flash size */
+
+struct nvram_header {
+	u32 magic;
+	u32 len;
+	u32 crc_ver_init;	/* 0:7 crc, 8:15 ver, 16:31 sdram_init */
+	u32 config_refresh;	/* 0:15 sdram_config, 16:31 sdram_refresh */
+	u32 config_ncdl;	/* ncdl values for memc */
+};
+
+static char nvram_buf[NVRAM_SPACE];
+static size_t nvram_len;
+static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
+
+/**
+ * bcm47xx_nvram_is_valid - check for a valid NVRAM at specified memory
+ */
+static bool bcm47xx_nvram_is_valid(void __iomem *nvram)
+{
+	return ((struct nvram_header *)nvram)->magic == NVRAM_MAGIC;
+}
+
+/**
+ * bcm47xx_nvram_copy - copy NVRAM to internal buffer
+ */
+static void bcm47xx_nvram_copy(void __iomem *nvram_start, size_t res_size)
+{
+	struct nvram_header __iomem *header = nvram_start;
+	size_t copy_size;
+
+	copy_size = header->len;
+	if (copy_size > res_size) {
+		pr_err("The nvram size according to the header seems to be bigger than the partition on flash\n");
+		copy_size = res_size;
+	}
+	if (copy_size >= NVRAM_SPACE) {
+		pr_err("nvram on flash (%zu bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
+		       copy_size, NVRAM_SPACE - 1);
+		copy_size = NVRAM_SPACE - 1;
+	}
+
+	__ioread32_copy(nvram_buf, nvram_start, DIV_ROUND_UP(copy_size, 4));
+	nvram_buf[NVRAM_SPACE - 1] = '\0';
+	nvram_len = copy_size;
+}
+
+/**
+ * bcm47xx_nvram_find_and_copy - find NVRAM on flash mapping & copy it
+ */
+static int bcm47xx_nvram_find_and_copy(void __iomem *flash_start, size_t res_size)
+{
+	size_t flash_size;
+	size_t offset;
+	int i;
+
+	if (nvram_len) {
+		pr_warn("nvram already initialized\n");
+		return -EEXIST;
+	}
+
+	/* TODO: when nvram is on nand flash check for bad blocks first. */
+
+	/* Try every possible flash size and check for NVRAM at its end */
+	for (flash_size = FLASH_MIN; flash_size <= res_size; flash_size <<= 1) {
+		for (i = 0; i < ARRAY_SIZE(nvram_sizes); i++) {
+			offset = flash_size - nvram_sizes[i];
+			if (bcm47xx_nvram_is_valid(flash_start + offset))
+				goto found;
+		}
+	}
+
+	/* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
+
+	offset = 4096;
+	if (bcm47xx_nvram_is_valid(flash_start + offset))
+		goto found;
+
+	offset = 1024;
+	if (bcm47xx_nvram_is_valid(flash_start + offset))
+		goto found;
+
+	pr_err("no nvram found\n");
+	return -ENXIO;
+
+found:
+	bcm47xx_nvram_copy(flash_start + offset, res_size - offset);
+
+	return 0;
+}
+
+int bcm47xx_nvram_init_from_iomem(void __iomem *nvram_start, size_t res_size)
+{
+	if (nvram_len) {
+		pr_warn("nvram already initialized\n");
+		return -EEXIST;
+	}
+
+	if (!bcm47xx_nvram_is_valid(nvram_start)) {
+		pr_err("No valid NVRAM found\n");
+		return -ENOENT;
+	}
+
+	bcm47xx_nvram_copy(nvram_start, res_size);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bcm47xx_nvram_init_from_iomem);
+
+/*
+ * On bcm47xx we need access to the NVRAM very early, so we can't use mtd
+ * subsystem to access flash. We can't even use platform device / driver to
+ * store memory offset.
+ * To handle this we provide following symbol. It's supposed to be called as
+ * soon as we get info about flash device, before any NVRAM entry is needed.
+ */
+int bcm47xx_nvram_init_from_mem(u32 base, u32 lim)
+{
+	void __iomem *iobase;
+	int err;
+
+	iobase = ioremap(base, lim);
+	if (!iobase)
+		return -ENOMEM;
+
+	err = bcm47xx_nvram_find_and_copy(iobase, lim);
+
+	iounmap(iobase);
+
+	return err;
+}
+
+static int nvram_init(void)
+{
+#ifdef CONFIG_MTD
+	struct mtd_info *mtd;
+	struct nvram_header header;
+	size_t bytes_read;
+	int err;
+
+	mtd = get_mtd_device_nm("nvram");
+	if (IS_ERR(mtd))
+		return -ENODEV;
+
+	err = mtd_read(mtd, 0, sizeof(header), &bytes_read, (uint8_t *)&header);
+	if (!err && header.magic == NVRAM_MAGIC &&
+	    header.len > sizeof(header)) {
+		nvram_len = header.len;
+		if (nvram_len >= NVRAM_SPACE) {
+			pr_err("nvram on flash (%zu bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
+				nvram_len, NVRAM_SPACE);
+			nvram_len = NVRAM_SPACE - 1;
+		}
+
+		err = mtd_read(mtd, 0, nvram_len, &nvram_len,
+			       (u8 *)nvram_buf);
+		return err;
+	}
+#endif
+
+	return -ENXIO;
+}
+
+int bcm47xx_nvram_getenv(const char *name, char *val, size_t val_len)
+{
+	char *var, *value, *end, *eq;
+	int err;
+
+	if (!name)
+		return -EINVAL;
+
+	if (!nvram_len) {
+		err = nvram_init();
+		if (err)
+			return err;
+	}
+
+	/* Look for name=value and return value */
+	var = &nvram_buf[sizeof(struct nvram_header)];
+	end = nvram_buf + sizeof(nvram_buf);
+	while (var < end && *var) {
+		eq = strchr(var, '=');
+		if (!eq)
+			break;
+		value = eq + 1;
+		if (eq - var == strlen(name) &&
+		    strncmp(var, name, eq - var) == 0)
+			return snprintf(val, val_len, "%s", value);
+		var = value + strlen(value) + 1;
+	}
+	return -ENOENT;
+}
+EXPORT_SYMBOL(bcm47xx_nvram_getenv);
+
+int bcm47xx_nvram_gpio_pin(const char *name)
+{
+	int i, err;
+	char nvram_var[] = "gpioXX";
+	char buf[NVRAM_MAX_GPIO_VALUE_LEN];
+
+	/* TODO: Optimize it to don't call getenv so many times */
+	for (i = 0; i < NVRAM_MAX_GPIO_ENTRIES; i++) {
+		err = snprintf(nvram_var, sizeof(nvram_var), "gpio%i", i);
+		if (err <= 0)
+			continue;
+		err = bcm47xx_nvram_getenv(nvram_var, buf, sizeof(buf));
+		if (err <= 0)
+			continue;
+		if (!strcmp(name, buf))
+			return i;
+	}
+	return -ENOENT;
+}
+EXPORT_SYMBOL(bcm47xx_nvram_gpio_pin);
+
+char *bcm47xx_nvram_get_contents(size_t *nvram_size)
+{
+	int err;
+	char *nvram;
+
+	if (!nvram_len) {
+		err = nvram_init();
+		if (err)
+			return NULL;
+	}
+
+	*nvram_size = nvram_len - sizeof(struct nvram_header);
+	nvram = vmalloc(*nvram_size);
+	if (!nvram)
+		return NULL;
+	memcpy(nvram, &nvram_buf[sizeof(struct nvram_header)], *nvram_size);
+
+	return nvram;
+}
+EXPORT_SYMBOL(bcm47xx_nvram_get_contents);
+
+MODULE_LICENSE("GPL v2");