Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 297 insertions, 0 deletions

diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi.h b/drivers/gpu/drm/sun4i/sun4i_hdmi.h
new file mode 100644
index 000000000..65c801cd6
--- /dev/null
+++ b/drivers/gpu/drm/sun4i/sun4i_hdmi.h
@@ -0,0 +1,297 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2016 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ */
+
+#ifndef _SUN4I_HDMI_H_
+#define _SUN4I_HDMI_H_
+
+#include <drm/drm_connector.h>
+#include <drm/drm_encoder.h>
+#include <linux/regmap.h>
+
+#include <media/cec-pin.h>
+
+#define SUN4I_HDMI_CTRL_REG		0x004
+#define SUN4I_HDMI_CTRL_ENABLE			BIT(31)
+
+#define SUN4I_HDMI_IRQ_REG		0x008
+#define SUN4I_HDMI_IRQ_STA_MASK			0x73
+#define SUN4I_HDMI_IRQ_STA_FIFO_OF		BIT(1)
+#define SUN4I_HDMI_IRQ_STA_FIFO_UF		BIT(0)
+
+#define SUN4I_HDMI_HPD_REG		0x00c
+#define SUN4I_HDMI_HPD_HIGH			BIT(0)
+
+#define SUN4I_HDMI_VID_CTRL_REG		0x010
+#define SUN4I_HDMI_VID_CTRL_ENABLE		BIT(31)
+#define SUN4I_HDMI_VID_CTRL_HDMI_MODE		BIT(30)
+
+#define SUN4I_HDMI_VID_TIMING_ACT_REG	0x014
+#define SUN4I_HDMI_VID_TIMING_BP_REG	0x018
+#define SUN4I_HDMI_VID_TIMING_FP_REG	0x01c
+#define SUN4I_HDMI_VID_TIMING_SPW_REG	0x020
+
+#define SUN4I_HDMI_VID_TIMING_X(x)		((((x) - 1) & GENMASK(11, 0)))
+#define SUN4I_HDMI_VID_TIMING_Y(y)		((((y) - 1) & GENMASK(11, 0)) << 16)
+
+#define SUN4I_HDMI_VID_TIMING_POL_REG	0x024
+#define SUN4I_HDMI_VID_TIMING_POL_TX_CLK        (0x3e0 << 16)
+#define SUN4I_HDMI_VID_TIMING_POL_VSYNC		BIT(1)
+#define SUN4I_HDMI_VID_TIMING_POL_HSYNC		BIT(0)
+
+#define SUN4I_HDMI_AVI_INFOFRAME_REG(n)	(0x080 + (n))
+
+#define SUN4I_HDMI_PAD_CTRL0_REG	0x200
+#define SUN4I_HDMI_PAD_CTRL0_BIASEN		BIT(31)
+#define SUN4I_HDMI_PAD_CTRL0_LDOCEN		BIT(30)
+#define SUN4I_HDMI_PAD_CTRL0_LDODEN		BIT(29)
+#define SUN4I_HDMI_PAD_CTRL0_PWENC		BIT(28)
+#define SUN4I_HDMI_PAD_CTRL0_PWEND		BIT(27)
+#define SUN4I_HDMI_PAD_CTRL0_PWENG		BIT(26)
+#define SUN4I_HDMI_PAD_CTRL0_CKEN		BIT(25)
+#define SUN4I_HDMI_PAD_CTRL0_TXEN		BIT(23)
+
+#define SUN4I_HDMI_PAD_CTRL1_REG	0x204
+#define SUN4I_HDMI_PAD_CTRL1_UNKNOWN		BIT(24)	/* set on A31 */
+#define SUN4I_HDMI_PAD_CTRL1_AMP_OPT		BIT(23)
+#define SUN4I_HDMI_PAD_CTRL1_AMPCK_OPT		BIT(22)
+#define SUN4I_HDMI_PAD_CTRL1_EMP_OPT		BIT(20)
+#define SUN4I_HDMI_PAD_CTRL1_EMPCK_OPT		BIT(19)
+#define SUN4I_HDMI_PAD_CTRL1_PWSCK		BIT(18)
+#define SUN4I_HDMI_PAD_CTRL1_PWSDT		BIT(17)
+#define SUN4I_HDMI_PAD_CTRL1_REG_DEN		BIT(15)
+#define SUN4I_HDMI_PAD_CTRL1_REG_DENCK		BIT(14)
+#define SUN4I_HDMI_PAD_CTRL1_REG_EMP(n)		(((n) & 7) << 10)
+#define SUN4I_HDMI_PAD_CTRL1_HALVE_CLK		BIT(6)
+#define SUN4I_HDMI_PAD_CTRL1_REG_AMP(n)		(((n) & 7) << 3)
+
+/* These bits seem to invert the TMDS data channels */
+#define SUN4I_HDMI_PAD_CTRL1_INVERT_R		BIT(2)
+#define SUN4I_HDMI_PAD_CTRL1_INVERT_G		BIT(1)
+#define SUN4I_HDMI_PAD_CTRL1_INVERT_B		BIT(0)
+
+#define SUN4I_HDMI_PLL_CTRL_REG		0x208
+#define SUN4I_HDMI_PLL_CTRL_PLL_EN		BIT(31)
+#define SUN4I_HDMI_PLL_CTRL_BWS			BIT(30)
+#define SUN4I_HDMI_PLL_CTRL_HV_IS_33		BIT(29)
+#define SUN4I_HDMI_PLL_CTRL_LDO1_EN		BIT(28)
+#define SUN4I_HDMI_PLL_CTRL_LDO2_EN		BIT(27)
+#define SUN4I_HDMI_PLL_CTRL_SDIV2		BIT(25)
+#define SUN4I_HDMI_PLL_CTRL_VCO_GAIN(n)		(((n) & 7) << 20)
+#define SUN4I_HDMI_PLL_CTRL_S(n)		(((n) & 7) << 17)
+#define SUN4I_HDMI_PLL_CTRL_CP_S(n)		(((n) & 0x1f) << 12)
+#define SUN4I_HDMI_PLL_CTRL_CS(n)		(((n) & 0xf) << 8)
+#define SUN4I_HDMI_PLL_CTRL_DIV(n)		(((n) & 0xf) << 4)
+#define SUN4I_HDMI_PLL_CTRL_DIV_MASK		GENMASK(7, 4)
+#define SUN4I_HDMI_PLL_CTRL_VCO_S(n)		((n) & 0xf)
+
+#define SUN4I_HDMI_PLL_DBG0_REG		0x20c
+#define SUN4I_HDMI_PLL_DBG0_TMDS_PARENT(n)	(((n) & 1) << 21)
+#define SUN4I_HDMI_PLL_DBG0_TMDS_PARENT_MASK	BIT(21)
+#define SUN4I_HDMI_PLL_DBG0_TMDS_PARENT_SHIFT	21
+
+#define SUN4I_HDMI_CEC			0x214
+#define SUN4I_HDMI_CEC_ENABLE			BIT(11)
+#define SUN4I_HDMI_CEC_TX			BIT(9)
+#define SUN4I_HDMI_CEC_RX			BIT(8)
+
+#define SUN4I_HDMI_PKT_CTRL_REG(n)	(0x2f0 + (4 * (n)))
+#define SUN4I_HDMI_PKT_CTRL_TYPE(n, t)		((t) << (((n) % 4) * 4))
+
+#define SUN4I_HDMI_UNKNOWN_REG		0x300
+#define SUN4I_HDMI_UNKNOWN_INPUT_SYNC		BIT(27)
+
+#define SUN4I_HDMI_DDC_CTRL_REG		0x500
+#define SUN4I_HDMI_DDC_CTRL_ENABLE		BIT(31)
+#define SUN4I_HDMI_DDC_CTRL_START_CMD		BIT(30)
+#define SUN4I_HDMI_DDC_CTRL_FIFO_DIR_MASK	BIT(8)
+#define SUN4I_HDMI_DDC_CTRL_FIFO_DIR_WRITE	(1 << 8)
+#define SUN4I_HDMI_DDC_CTRL_FIFO_DIR_READ	(0 << 8)
+#define SUN4I_HDMI_DDC_CTRL_RESET		BIT(0)
+
+#define SUN4I_HDMI_DDC_ADDR_REG		0x504
+#define SUN4I_HDMI_DDC_ADDR_SEGMENT(seg)	(((seg) & 0xff) << 24)
+#define SUN4I_HDMI_DDC_ADDR_EDDC(addr)		(((addr) & 0xff) << 16)
+#define SUN4I_HDMI_DDC_ADDR_OFFSET(off)		(((off) & 0xff) << 8)
+#define SUN4I_HDMI_DDC_ADDR_SLAVE(addr)		((addr) & 0xff)
+
+#define SUN4I_HDMI_DDC_INT_STATUS_REG		0x50c
+#define SUN4I_HDMI_DDC_INT_STATUS_ILLEGAL_FIFO_OPERATION	BIT(7)
+#define SUN4I_HDMI_DDC_INT_STATUS_DDC_RX_FIFO_UNDERFLOW		BIT(6)
+#define SUN4I_HDMI_DDC_INT_STATUS_DDC_TX_FIFO_OVERFLOW		BIT(5)
+#define SUN4I_HDMI_DDC_INT_STATUS_FIFO_REQUEST			BIT(4)
+#define SUN4I_HDMI_DDC_INT_STATUS_ARBITRATION_ERROR		BIT(3)
+#define SUN4I_HDMI_DDC_INT_STATUS_ACK_ERROR			BIT(2)
+#define SUN4I_HDMI_DDC_INT_STATUS_BUS_ERROR			BIT(1)
+#define SUN4I_HDMI_DDC_INT_STATUS_TRANSFER_COMPLETE		BIT(0)
+
+#define SUN4I_HDMI_DDC_FIFO_CTRL_REG	0x510
+#define SUN4I_HDMI_DDC_FIFO_CTRL_CLEAR		BIT(31)
+#define SUN4I_HDMI_DDC_FIFO_CTRL_RX_THRES(n)	(((n) & 0xf) << 4)
+#define SUN4I_HDMI_DDC_FIFO_CTRL_RX_THRES_MASK	GENMASK(7, 4)
+#define SUN4I_HDMI_DDC_FIFO_CTRL_RX_THRES_MAX	(BIT(4) - 1)
+#define SUN4I_HDMI_DDC_FIFO_CTRL_TX_THRES(n)	((n) & 0xf)
+#define SUN4I_HDMI_DDC_FIFO_CTRL_TX_THRES_MASK	GENMASK(3, 0)
+#define SUN4I_HDMI_DDC_FIFO_CTRL_TX_THRES_MAX	(BIT(4) - 1)
+
+#define SUN4I_HDMI_DDC_FIFO_DATA_REG	0x518
+
+#define SUN4I_HDMI_DDC_BYTE_COUNT_REG	0x51c
+#define SUN4I_HDMI_DDC_BYTE_COUNT_MAX		(BIT(10) - 1)
+
+#define SUN4I_HDMI_DDC_CMD_REG		0x520
+#define SUN4I_HDMI_DDC_CMD_EXPLICIT_EDDC_READ	6
+#define SUN4I_HDMI_DDC_CMD_IMPLICIT_READ	5
+#define SUN4I_HDMI_DDC_CMD_IMPLICIT_WRITE	3
+
+#define SUN4I_HDMI_DDC_CLK_REG		0x528
+#define SUN4I_HDMI_DDC_CLK_M(m)			(((m) & 0xf) << 3)
+#define SUN4I_HDMI_DDC_CLK_N(n)			((n) & 0x7)
+
+#define SUN4I_HDMI_DDC_LINE_CTRL_REG	0x540
+#define SUN4I_HDMI_DDC_LINE_CTRL_SDA_ENABLE	BIT(9)
+#define SUN4I_HDMI_DDC_LINE_CTRL_SCL_ENABLE	BIT(8)
+
+#define SUN4I_HDMI_DDC_FIFO_SIZE	16
+
+/* A31 specific */
+#define SUN6I_HDMI_DDC_CTRL_REG		0x500
+#define SUN6I_HDMI_DDC_CTRL_RESET		BIT(31)
+#define SUN6I_HDMI_DDC_CTRL_START_CMD		BIT(27)
+#define SUN6I_HDMI_DDC_CTRL_SDA_ENABLE		BIT(6)
+#define SUN6I_HDMI_DDC_CTRL_SCL_ENABLE		BIT(4)
+#define SUN6I_HDMI_DDC_CTRL_ENABLE		BIT(0)
+
+#define SUN6I_HDMI_DDC_CMD_REG		0x508
+#define SUN6I_HDMI_DDC_CMD_BYTE_COUNT(count)	((count) << 16)
+/* command types in lower 3 bits are the same as sun4i */
+
+#define SUN6I_HDMI_DDC_ADDR_REG		0x50c
+#define SUN6I_HDMI_DDC_ADDR_SEGMENT(seg)	(((seg) & 0xff) << 24)
+#define SUN6I_HDMI_DDC_ADDR_EDDC(addr)		(((addr) & 0xff) << 16)
+#define SUN6I_HDMI_DDC_ADDR_OFFSET(off)		(((off) & 0xff) << 8)
+#define SUN6I_HDMI_DDC_ADDR_SLAVE(addr)		(((addr) & 0xff) << 1)
+
+#define SUN6I_HDMI_DDC_INT_STATUS_REG	0x514
+#define SUN6I_HDMI_DDC_INT_STATUS_TIMEOUT	BIT(8)
+/* lower 8 bits are the same as sun4i */
+
+#define SUN6I_HDMI_DDC_FIFO_CTRL_REG	0x518
+#define SUN6I_HDMI_DDC_FIFO_CTRL_CLEAR		BIT(15)
+/* lower 9 bits are the same as sun4i */
+
+#define SUN6I_HDMI_DDC_CLK_REG		0x520
+/* DDC CLK bit fields are the same, but the formula is not */
+
+#define SUN6I_HDMI_DDC_FIFO_DATA_REG	0x580
+
+enum sun4i_hdmi_pkt_type {
+	SUN4I_HDMI_PKT_AVI = 2,
+	SUN4I_HDMI_PKT_END = 15,
+};
+
+struct sun4i_hdmi_variant {
+	bool has_ddc_parent_clk;
+	bool has_reset_control;
+
+	u32 pad_ctrl0_init_val;
+	u32 pad_ctrl1_init_val;
+	u32 pll_ctrl_init_val;
+
+	struct reg_field ddc_clk_reg;
+	u8 ddc_clk_pre_divider;
+	u8 ddc_clk_m_offset;
+
+	u8 tmds_clk_div_offset;
+
+	/* Register fields for I2C adapter */
+	struct reg_field	field_ddc_en;
+	struct reg_field	field_ddc_start;
+	struct reg_field	field_ddc_reset;
+	struct reg_field	field_ddc_addr_reg;
+	struct reg_field	field_ddc_slave_addr;
+	struct reg_field	field_ddc_int_mask;
+	struct reg_field	field_ddc_int_status;
+	struct reg_field	field_ddc_fifo_clear;
+	struct reg_field	field_ddc_fifo_rx_thres;
+	struct reg_field	field_ddc_fifo_tx_thres;
+	struct reg_field	field_ddc_byte_count;
+	struct reg_field	field_ddc_cmd;
+	struct reg_field	field_ddc_sda_en;
+	struct reg_field	field_ddc_sck_en;
+
+	/* DDC FIFO register offset */
+	u32			ddc_fifo_reg;
+
+	/*
+	 * DDC FIFO threshold boundary conditions
+	 *
+	 * This is used to cope with the threshold boundary condition
+	 * being slightly different on sun5i and sun6i.
+	 *
+	 * On sun5i the threshold is exclusive, i.e. does not include,
+	 * the value of the threshold. ( > for RX; < for TX )
+	 * On sun6i the threshold is inclusive, i.e. includes, the
+	 * value of the threshold. ( >= for RX; <= for TX )
+	 */
+	bool			ddc_fifo_thres_incl;
+
+	bool			ddc_fifo_has_dir;
+};
+
+struct sun4i_hdmi {
+	struct drm_connector	connector;
+	struct drm_encoder	encoder;
+	struct device		*dev;
+
+	void __iomem		*base;
+	struct regmap		*regmap;
+
+	/* Reset control */
+	struct reset_control	*reset;
+
+	/* Parent clocks */
+	struct clk		*bus_clk;
+	struct clk		*mod_clk;
+	struct clk		*ddc_parent_clk;
+	struct clk		*pll0_clk;
+	struct clk		*pll1_clk;
+
+	/* And the clocks we create */
+	struct clk		*ddc_clk;
+	struct clk		*tmds_clk;
+
+	struct i2c_adapter	*i2c;
+	struct i2c_adapter	*ddc_i2c;
+
+	/* Regmap fields for I2C adapter */
+	struct regmap_field	*field_ddc_en;
+	struct regmap_field	*field_ddc_start;
+	struct regmap_field	*field_ddc_reset;
+	struct regmap_field	*field_ddc_addr_reg;
+	struct regmap_field	*field_ddc_slave_addr;
+	struct regmap_field	*field_ddc_int_mask;
+	struct regmap_field	*field_ddc_int_status;
+	struct regmap_field	*field_ddc_fifo_clear;
+	struct regmap_field	*field_ddc_fifo_rx_thres;
+	struct regmap_field	*field_ddc_fifo_tx_thres;
+	struct regmap_field	*field_ddc_byte_count;
+	struct regmap_field	*field_ddc_cmd;
+	struct regmap_field	*field_ddc_sda_en;
+	struct regmap_field	*field_ddc_sck_en;
+
+	struct sun4i_drv	*drv;
+
+	struct cec_adapter	*cec_adap;
+
+	const struct sun4i_hdmi_variant	*variant;
+};
+
+int sun4i_ddc_create(struct sun4i_hdmi *hdmi, struct clk *clk);
+int sun4i_tmds_create(struct sun4i_hdmi *hdmi);
+int sun4i_hdmi_i2c_create(struct device *dev, struct sun4i_hdmi *hdmi);
+
+#endif /* _SUN4I_HDMI_H_ */