Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 428 insertions, 0 deletions

diff --git a/drivers/iio/light/cm3232.c b/drivers/iio/light/cm3232.c
new file mode 100644
index 000000000..43e492f50
--- /dev/null
+++ b/drivers/iio/light/cm3232.c
@@ -0,0 +1,428 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * CM3232 Ambient Light Sensor
+ *
+ * Copyright (C) 2014-2015 Capella Microsystems Inc.
+ * Author: Kevin Tsai <ktsai@capellamicro.com>
+ *
+ * IIO driver for CM3232 (7-bit I2C slave address 0x10).
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/init.h>
+
+/* Registers Address */
+#define CM3232_REG_ADDR_CMD		0x00
+#define CM3232_REG_ADDR_ALS		0x50
+#define CM3232_REG_ADDR_ID		0x53
+
+#define CM3232_CMD_ALS_DISABLE		BIT(0)
+
+#define CM3232_CMD_ALS_IT_SHIFT		2
+#define CM3232_CMD_ALS_IT_MASK		(BIT(2) | BIT(3) | BIT(4))
+#define CM3232_CMD_ALS_IT_DEFAULT	(0x01 << CM3232_CMD_ALS_IT_SHIFT)
+
+#define CM3232_CMD_ALS_RESET		BIT(6)
+
+#define CM3232_CMD_DEFAULT		CM3232_CMD_ALS_IT_DEFAULT
+
+#define CM3232_HW_ID			0x32
+#define CM3232_CALIBSCALE_DEFAULT	100000
+#define CM3232_CALIBSCALE_RESOLUTION	100000
+#define CM3232_MLUX_PER_LUX		1000
+
+#define CM3232_MLUX_PER_BIT_DEFAULT	64
+#define CM3232_MLUX_PER_BIT_BASE_IT	100000
+
+static const struct {
+	int val;
+	int val2;
+	u8 it;
+} cm3232_als_it_scales[] = {
+	{0, 100000, 0},	/* 0.100000 */
+	{0, 200000, 1},	/* 0.200000 */
+	{0, 400000, 2},	/* 0.400000 */
+	{0, 800000, 3},	/* 0.800000 */
+	{1, 600000, 4},	/* 1.600000 */
+	{3, 200000, 5},	/* 3.200000 */
+};
+
+struct cm3232_als_info {
+	u8 regs_cmd_default;
+	u8 hw_id;
+	int calibscale;
+	int mlux_per_bit;
+	int mlux_per_bit_base_it;
+};
+
+static struct cm3232_als_info cm3232_als_info_default = {
+	.regs_cmd_default = CM3232_CMD_DEFAULT,
+	.hw_id = CM3232_HW_ID,
+	.calibscale = CM3232_CALIBSCALE_DEFAULT,
+	.mlux_per_bit = CM3232_MLUX_PER_BIT_DEFAULT,
+	.mlux_per_bit_base_it = CM3232_MLUX_PER_BIT_BASE_IT,
+};
+
+struct cm3232_chip {
+	struct i2c_client *client;
+	struct cm3232_als_info *als_info;
+	u8 regs_cmd;
+	u16 regs_als;
+};
+
+/**
+ * cm3232_reg_init() - Initialize CM3232
+ * @chip:	pointer of struct cm3232_chip.
+ *
+ * Check and initialize CM3232 ambient light sensor.
+ *
+ * Return: 0 for success; otherwise for error code.
+ */
+static int cm3232_reg_init(struct cm3232_chip *chip)
+{
+	struct i2c_client *client = chip->client;
+	s32 ret;
+
+	chip->als_info = &cm3232_als_info_default;
+
+	/* Identify device */
+	ret = i2c_smbus_read_word_data(client, CM3232_REG_ADDR_ID);
+	if (ret < 0) {
+		dev_err(&chip->client->dev, "Error reading addr_id\n");
+		return ret;
+	}
+
+	if ((ret & 0xFF) != chip->als_info->hw_id)
+		return -ENODEV;
+
+	/* Disable and reset device */
+	chip->regs_cmd = CM3232_CMD_ALS_DISABLE | CM3232_CMD_ALS_RESET;
+	ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
+					chip->regs_cmd);
+	if (ret < 0) {
+		dev_err(&chip->client->dev, "Error writing reg_cmd\n");
+		return ret;
+	}
+
+	/* Register default value */
+	chip->regs_cmd = chip->als_info->regs_cmd_default;
+
+	/* Configure register */
+	ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
+					chip->regs_cmd);
+	if (ret < 0)
+		dev_err(&chip->client->dev, "Error writing reg_cmd\n");
+
+	return ret;
+}
+
+/**
+ *  cm3232_read_als_it() - Get sensor integration time
+ *  @chip:	pointer of struct cm3232_chip
+ *  @val:	pointer of int to load the integration (sec).
+ *  @val2:	pointer of int to load the integration time (microsecond).
+ *
+ *  Report the current integration time.
+ *
+ *  Return: IIO_VAL_INT_PLUS_MICRO for success, otherwise -EINVAL.
+ */
+static int cm3232_read_als_it(struct cm3232_chip *chip, int *val, int *val2)
+{
+	u16 als_it;
+	int i;
+
+	als_it = chip->regs_cmd;
+	als_it &= CM3232_CMD_ALS_IT_MASK;
+	als_it >>= CM3232_CMD_ALS_IT_SHIFT;
+	for (i = 0; i < ARRAY_SIZE(cm3232_als_it_scales); i++) {
+		if (als_it == cm3232_als_it_scales[i].it) {
+			*val = cm3232_als_it_scales[i].val;
+			*val2 = cm3232_als_it_scales[i].val2;
+			return IIO_VAL_INT_PLUS_MICRO;
+		}
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * cm3232_write_als_it() - Write sensor integration time
+ * @chip:	pointer of struct cm3232_chip.
+ * @val:	integration time in second.
+ * @val2:	integration time in microsecond.
+ *
+ * Convert integration time to sensor value.
+ *
+ * Return: i2c_smbus_write_byte_data command return value.
+ */
+static int cm3232_write_als_it(struct cm3232_chip *chip, int val, int val2)
+{
+	struct i2c_client *client = chip->client;
+	u16 als_it, cmd;
+	int i;
+	s32 ret;
+
+	for (i = 0; i < ARRAY_SIZE(cm3232_als_it_scales); i++) {
+		if (val == cm3232_als_it_scales[i].val &&
+			val2 == cm3232_als_it_scales[i].val2) {
+
+			als_it = cm3232_als_it_scales[i].it;
+			als_it <<= CM3232_CMD_ALS_IT_SHIFT;
+
+			cmd = chip->regs_cmd & ~CM3232_CMD_ALS_IT_MASK;
+			cmd |= als_it;
+			ret = i2c_smbus_write_byte_data(client,
+							CM3232_REG_ADDR_CMD,
+							cmd);
+			if (ret < 0)
+				return ret;
+			chip->regs_cmd = cmd;
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+/**
+ * cm3232_get_lux() - report current lux value
+ * @chip:	pointer of struct cm3232_chip.
+ *
+ * Convert sensor data to lux.  It depends on integration
+ * time and calibscale variable.
+ *
+ * Return: Zero or positive value is lux, otherwise error code.
+ */
+static int cm3232_get_lux(struct cm3232_chip *chip)
+{
+	struct i2c_client *client = chip->client;
+	struct cm3232_als_info *als_info = chip->als_info;
+	int ret;
+	int val, val2;
+	int als_it;
+	u64 lux;
+
+	/* Calculate mlux per bit based on als_it */
+	ret = cm3232_read_als_it(chip, &val, &val2);
+	if (ret < 0)
+		return -EINVAL;
+	als_it = val * 1000000 + val2;
+	lux = (__force u64)als_info->mlux_per_bit;
+	lux *= als_info->mlux_per_bit_base_it;
+	lux = div_u64(lux, als_it);
+
+	ret = i2c_smbus_read_word_data(client, CM3232_REG_ADDR_ALS);
+	if (ret < 0) {
+		dev_err(&client->dev, "Error reading reg_addr_als\n");
+		return ret;
+	}
+
+	chip->regs_als = (u16)ret;
+	lux *= chip->regs_als;
+	lux *= als_info->calibscale;
+	lux = div_u64(lux, CM3232_CALIBSCALE_RESOLUTION);
+	lux = div_u64(lux, CM3232_MLUX_PER_LUX);
+
+	if (lux > 0xFFFF)
+		lux = 0xFFFF;
+
+	return (int)lux;
+}
+
+static int cm3232_read_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan,
+			int *val, int *val2, long mask)
+{
+	struct cm3232_chip *chip = iio_priv(indio_dev);
+	struct cm3232_als_info *als_info = chip->als_info;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		ret = cm3232_get_lux(chip);
+		if (ret < 0)
+			return ret;
+		*val = ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_CALIBSCALE:
+		*val = als_info->calibscale;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_INT_TIME:
+		return cm3232_read_als_it(chip, val, val2);
+	}
+
+	return -EINVAL;
+}
+
+static int cm3232_write_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan,
+			int val, int val2, long mask)
+{
+	struct cm3232_chip *chip = iio_priv(indio_dev);
+	struct cm3232_als_info *als_info = chip->als_info;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_CALIBSCALE:
+		als_info->calibscale = val;
+		return 0;
+	case IIO_CHAN_INFO_INT_TIME:
+		return cm3232_write_als_it(chip, val, val2);
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * cm3232_get_it_available() - Get available ALS IT value
+ * @dev:	pointer of struct device.
+ * @attr:	pointer of struct device_attribute.
+ * @buf:	pointer of return string buffer.
+ *
+ * Display the available integration time in second.
+ *
+ * Return: string length.
+ */
+static ssize_t cm3232_get_it_available(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	int i, len;
+
+	for (i = 0, len = 0; i < ARRAY_SIZE(cm3232_als_it_scales); i++)
+		len += scnprintf(buf + len, PAGE_SIZE - len, "%u.%06u ",
+			cm3232_als_it_scales[i].val,
+			cm3232_als_it_scales[i].val2);
+	return len + scnprintf(buf + len, PAGE_SIZE - len, "\n");
+}
+
+static const struct iio_chan_spec cm3232_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_PROCESSED) |
+			BIT(IIO_CHAN_INFO_CALIBSCALE) |
+			BIT(IIO_CHAN_INFO_INT_TIME),
+	}
+};
+
+static IIO_DEVICE_ATTR(in_illuminance_integration_time_available,
+			S_IRUGO, cm3232_get_it_available, NULL, 0);
+
+static struct attribute *cm3232_attributes[] = {
+	&iio_dev_attr_in_illuminance_integration_time_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group cm3232_attribute_group = {
+	.attrs = cm3232_attributes
+};
+
+static const struct iio_info cm3232_info = {
+	.read_raw		= &cm3232_read_raw,
+	.write_raw		= &cm3232_write_raw,
+	.attrs			= &cm3232_attribute_group,
+};
+
+static int cm3232_probe(struct i2c_client *client)
+{
+	const struct i2c_device_id *id = i2c_client_get_device_id(client);
+	struct cm3232_chip *chip;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	chip = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	chip->client = client;
+
+	indio_dev->channels = cm3232_channels;
+	indio_dev->num_channels = ARRAY_SIZE(cm3232_channels);
+	indio_dev->info = &cm3232_info;
+	indio_dev->name = id->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = cm3232_reg_init(chip);
+	if (ret) {
+		dev_err(&client->dev,
+			"%s: register init failed\n",
+			__func__);
+		return ret;
+	}
+
+	return iio_device_register(indio_dev);
+}
+
+static void cm3232_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+	i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
+		CM3232_CMD_ALS_DISABLE);
+
+	iio_device_unregister(indio_dev);
+}
+
+static const struct i2c_device_id cm3232_id[] = {
+	{"cm3232", 0},
+	{}
+};
+
+static int cm3232_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct cm3232_chip *chip = iio_priv(indio_dev);
+	struct i2c_client *client = chip->client;
+	int ret;
+
+	chip->regs_cmd |= CM3232_CMD_ALS_DISABLE;
+	ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
+					chip->regs_cmd);
+
+	return ret;
+}
+
+static int cm3232_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct cm3232_chip *chip = iio_priv(indio_dev);
+	struct i2c_client *client = chip->client;
+	int ret;
+
+	chip->regs_cmd &= ~CM3232_CMD_ALS_DISABLE;
+	ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
+					chip->regs_cmd | CM3232_CMD_ALS_RESET);
+
+	return ret;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(cm3232_pm_ops, cm3232_suspend, cm3232_resume);
+
+MODULE_DEVICE_TABLE(i2c, cm3232_id);
+
+static const struct of_device_id cm3232_of_match[] = {
+	{.compatible = "capella,cm3232"},
+	{}
+};
+MODULE_DEVICE_TABLE(of, cm3232_of_match);
+
+static struct i2c_driver cm3232_driver = {
+	.driver = {
+		.name	= "cm3232",
+		.of_match_table = cm3232_of_match,
+		.pm	= pm_sleep_ptr(&cm3232_pm_ops),
+	},
+	.id_table	= cm3232_id,
+	.probe_new	= cm3232_probe,
+	.remove		= cm3232_remove,
+};
+
+module_i2c_driver(cm3232_driver);
+
+MODULE_AUTHOR("Kevin Tsai <ktsai@capellamicro.com>");
+MODULE_DESCRIPTION("CM3232 ambient light sensor driver");
+MODULE_LICENSE("GPL");