Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 376 insertions, 0 deletions

diff --git a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
new file mode 100644
index 000000000..c9eead01a
--- /dev/null
+++ b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * pulsedlight-lidar-lite-v2.c - Support for PulsedLight LIDAR sensor
+ *
+ * Copyright (C) 2015, 2017-2018
+ * Author: Matt Ranostay <matt.ranostay@konsulko.com>
+ *
+ * TODO: interrupt mode, and signal strength reporting
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/pm_runtime.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+#define LIDAR_REG_CONTROL		0x00
+#define LIDAR_REG_CONTROL_ACQUIRE	BIT(2)
+
+#define LIDAR_REG_STATUS		0x01
+#define LIDAR_REG_STATUS_INVALID	BIT(3)
+#define LIDAR_REG_STATUS_READY		BIT(0)
+
+#define LIDAR_REG_DATA_HBYTE		0x0f
+#define LIDAR_REG_DATA_LBYTE		0x10
+#define LIDAR_REG_DATA_WORD_READ	BIT(7)
+
+#define LIDAR_REG_PWR_CONTROL	0x65
+
+#define LIDAR_DRV_NAME "lidar"
+
+struct lidar_data {
+	struct iio_dev *indio_dev;
+	struct i2c_client *client;
+
+	int (*xfer)(struct lidar_data *data, u8 reg, u8 *val, int len);
+	int i2c_enabled;
+
+	/* Ensure timestamp is naturally aligned */
+	struct {
+		u16 chan;
+		s64 timestamp __aligned(8);
+	} scan;
+};
+
+static const struct iio_chan_spec lidar_channels[] = {
+	{
+		.type = IIO_DISTANCE,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 16,
+			.storagebits = 16,
+		},
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static int lidar_i2c_xfer(struct lidar_data *data, u8 reg, u8 *val, int len)
+{
+	struct i2c_client *client = data->client;
+	struct i2c_msg msg[2];
+	int ret;
+
+	msg[0].addr = client->addr;
+	msg[0].flags = client->flags | I2C_M_STOP;
+	msg[0].len = 1;
+	msg[0].buf  = (char *) &reg;
+
+	msg[1].addr = client->addr;
+	msg[1].flags = client->flags | I2C_M_RD;
+	msg[1].len = len;
+	msg[1].buf = (char *) val;
+
+	ret = i2c_transfer(client->adapter, msg, 2);
+
+	return (ret == 2) ? 0 : -EIO;
+}
+
+static int lidar_smbus_xfer(struct lidar_data *data, u8 reg, u8 *val, int len)
+{
+	struct i2c_client *client = data->client;
+	int ret;
+
+	/*
+	 * Device needs a STOP condition between address write, and data read
+	 * so in turn i2c_smbus_read_byte_data cannot be used
+	 */
+
+	while (len--) {
+		ret = i2c_smbus_write_byte(client, reg++);
+		if (ret < 0) {
+			dev_err(&client->dev, "cannot write addr value");
+			return ret;
+		}
+
+		ret = i2c_smbus_read_byte(client);
+		if (ret < 0) {
+			dev_err(&client->dev, "cannot read data value");
+			return ret;
+		}
+
+		*(val++) = ret;
+	}
+
+	return 0;
+}
+
+static int lidar_read_byte(struct lidar_data *data, u8 reg)
+{
+	int ret;
+	u8 val;
+
+	ret = data->xfer(data, reg, &val, 1);
+	if (ret < 0)
+		return ret;
+
+	return val;
+}
+
+static inline int lidar_write_control(struct lidar_data *data, int val)
+{
+	return i2c_smbus_write_byte_data(data->client, LIDAR_REG_CONTROL, val);
+}
+
+static inline int lidar_write_power(struct lidar_data *data, int val)
+{
+	return i2c_smbus_write_byte_data(data->client,
+					 LIDAR_REG_PWR_CONTROL, val);
+}
+
+static int lidar_read_measurement(struct lidar_data *data, u16 *reg)
+{
+	__be16 value;
+	int ret = data->xfer(data, LIDAR_REG_DATA_HBYTE |
+			(data->i2c_enabled ? LIDAR_REG_DATA_WORD_READ : 0),
+			(u8 *) &value, 2);
+
+	if (!ret)
+		*reg = be16_to_cpu(value);
+
+	return ret;
+}
+
+static int lidar_get_measurement(struct lidar_data *data, u16 *reg)
+{
+	struct i2c_client *client = data->client;
+	int tries = 10;
+	int ret;
+
+	ret = pm_runtime_resume_and_get(&client->dev);
+	if (ret < 0)
+		return ret;
+
+	/* start sample */
+	ret = lidar_write_control(data, LIDAR_REG_CONTROL_ACQUIRE);
+	if (ret < 0) {
+		dev_err(&client->dev, "cannot send start measurement command");
+		pm_runtime_put_noidle(&client->dev);
+		return ret;
+	}
+
+	while (tries--) {
+		usleep_range(1000, 2000);
+
+		ret = lidar_read_byte(data, LIDAR_REG_STATUS);
+		if (ret < 0)
+			break;
+
+		/* return -EINVAL since laser is likely pointed out of range */
+		if (ret & LIDAR_REG_STATUS_INVALID) {
+			*reg = 0;
+			ret = -EINVAL;
+			break;
+		}
+
+		/* sample ready to read */
+		if (!(ret & LIDAR_REG_STATUS_READY)) {
+			ret = lidar_read_measurement(data, reg);
+			break;
+		}
+		ret = -EIO;
+	}
+	pm_runtime_mark_last_busy(&client->dev);
+	pm_runtime_put_autosuspend(&client->dev);
+
+	return ret;
+}
+
+static int lidar_read_raw(struct iio_dev *indio_dev,
+			  struct iio_chan_spec const *chan,
+			  int *val, int *val2, long mask)
+{
+	struct lidar_data *data = iio_priv(indio_dev);
+	int ret = -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW: {
+		u16 reg;
+
+		if (iio_device_claim_direct_mode(indio_dev))
+			return -EBUSY;
+
+		ret = lidar_get_measurement(data, &reg);
+		if (!ret) {
+			*val = reg;
+			ret = IIO_VAL_INT;
+		}
+		iio_device_release_direct_mode(indio_dev);
+		break;
+	}
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		*val2 = 10000;
+		ret = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	}
+
+	return ret;
+}
+
+static irqreturn_t lidar_trigger_handler(int irq, void *private)
+{
+	struct iio_poll_func *pf = private;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct lidar_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = lidar_get_measurement(data, &data->scan.chan);
+	if (!ret) {
+		iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
+						   iio_get_time_ns(indio_dev));
+	} else if (ret != -EINVAL) {
+		dev_err(&data->client->dev, "cannot read LIDAR measurement");
+	}
+
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static const struct iio_info lidar_info = {
+	.read_raw = lidar_read_raw,
+};
+
+static int lidar_probe(struct i2c_client *client)
+{
+	struct lidar_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+	data = iio_priv(indio_dev);
+
+	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		data->xfer = lidar_i2c_xfer;
+		data->i2c_enabled = 1;
+	} else if (i2c_check_functionality(client->adapter,
+				I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE))
+		data->xfer = lidar_smbus_xfer;
+	else
+		return -EOPNOTSUPP;
+
+	indio_dev->info = &lidar_info;
+	indio_dev->name = LIDAR_DRV_NAME;
+	indio_dev->channels = lidar_channels;
+	indio_dev->num_channels = ARRAY_SIZE(lidar_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	i2c_set_clientdata(client, indio_dev);
+
+	data->client = client;
+	data->indio_dev = indio_dev;
+
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+					 lidar_trigger_handler, NULL);
+	if (ret)
+		return ret;
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto error_unreg_buffer;
+
+	pm_runtime_set_autosuspend_delay(&client->dev, 1000);
+	pm_runtime_use_autosuspend(&client->dev);
+
+	ret = pm_runtime_set_active(&client->dev);
+	if (ret)
+		goto error_unreg_buffer;
+	pm_runtime_enable(&client->dev);
+	pm_runtime_idle(&client->dev);
+
+	return 0;
+
+error_unreg_buffer:
+	iio_triggered_buffer_cleanup(indio_dev);
+
+	return ret;
+}
+
+static void lidar_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+	iio_device_unregister(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+
+	pm_runtime_disable(&client->dev);
+	pm_runtime_set_suspended(&client->dev);
+}
+
+static const struct i2c_device_id lidar_id[] = {
+	{"lidar-lite-v2", 0},
+	{"lidar-lite-v3", 0},
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, lidar_id);
+
+static const struct of_device_id lidar_dt_ids[] = {
+	{ .compatible = "pulsedlight,lidar-lite-v2" },
+	{ .compatible = "grmn,lidar-lite-v3" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lidar_dt_ids);
+
+static int lidar_pm_runtime_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct lidar_data *data = iio_priv(indio_dev);
+
+	return lidar_write_power(data, 0x0f);
+}
+
+static int lidar_pm_runtime_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct lidar_data *data = iio_priv(indio_dev);
+	int ret = lidar_write_power(data, 0);
+
+	/* regulator and FPGA needs settling time */
+	usleep_range(15000, 20000);
+
+	return ret;
+}
+
+static const struct dev_pm_ops lidar_pm_ops = {
+	RUNTIME_PM_OPS(lidar_pm_runtime_suspend, lidar_pm_runtime_resume, NULL)
+};
+
+static struct i2c_driver lidar_driver = {
+	.driver = {
+		.name	= LIDAR_DRV_NAME,
+		.of_match_table	= lidar_dt_ids,
+		.pm	= pm_ptr(&lidar_pm_ops),
+	},
+	.probe_new	= lidar_probe,
+	.remove		= lidar_remove,
+	.id_table	= lidar_id,
+};
+module_i2c_driver(lidar_driver);
+
+MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>");
+MODULE_DESCRIPTION("PulsedLight LIDAR sensor");
+MODULE_LICENSE("GPL");