Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 298 insertions, 0 deletions

diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
new file mode 100644
index 000000000..1495965bc
--- /dev/null
+++ b/drivers/mailbox/Kconfig
@@ -0,0 +1,298 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig MAILBOX
+	bool "Mailbox Hardware Support"
+	help
+	  Mailbox is a framework to control hardware communication between
+	  on-chip processors through queued messages and interrupt driven
+	  signals. Say Y if your platform supports hardware mailboxes.
+
+if MAILBOX
+
+config APPLE_MAILBOX
+	tristate "Apple Mailbox driver"
+	depends on ARCH_APPLE || (ARM64 && COMPILE_TEST)
+	default ARCH_APPLE
+	help
+	  Apple SoCs have various co-processors required for certain
+	  peripherals to work (NVMe, display controller, etc.). This
+	  driver adds support for the mailbox controller used to
+	  communicate with those.
+
+	  Say Y here if you have a Apple SoC.
+
+config ARM_MHU
+	tristate "ARM MHU Mailbox"
+	depends on ARM_AMBA
+	help
+	  Say Y here if you want to build the ARM MHU controller driver.
+	  The controller has 3 mailbox channels, the last of which can be
+	  used in Secure mode only.
+
+config ARM_MHU_V2
+	tristate "ARM MHUv2 Mailbox"
+	depends on ARM_AMBA
+	help
+	  Say Y here if you want to build the ARM MHUv2 controller driver,
+	  which provides unidirectional mailboxes between processing elements.
+
+config IMX_MBOX
+	tristate "i.MX Mailbox"
+	depends on ARCH_MXC || COMPILE_TEST
+	help
+	  Mailbox implementation for i.MX Messaging Unit (MU).
+
+config PLATFORM_MHU
+	tristate "Platform MHU Mailbox"
+	depends on OF
+	depends on HAS_IOMEM
+	help
+	  Say Y here if you want to build a platform specific variant MHU
+	  controller driver.
+	  The controller has a maximum of 3 mailbox channels, the last of
+	  which can be used in Secure mode only.
+
+config PL320_MBOX
+	bool "ARM PL320 Mailbox"
+	depends on ARM_AMBA
+	help
+	  An implementation of the ARM PL320 Interprocessor Communication
+	  Mailbox (IPCM), tailored for the Calxeda Highbank. It is used to
+	  send short messages between Highbank's A9 cores and the EnergyCore
+	  Management Engine, primarily for cpufreq. Say Y here if you want
+	  to use the PL320 IPCM support.
+
+config ARMADA_37XX_RWTM_MBOX
+	tristate "Armada 37xx rWTM BIU Mailbox"
+	depends on ARCH_MVEBU || COMPILE_TEST
+	depends on OF
+	help
+	  Mailbox implementation for communication with the the firmware
+	  running on the Cortex-M3 rWTM secure processor of the Armada 37xx
+	  SOC. Say Y here if you are building for such a device (for example
+	  the Turris Mox router).
+
+config OMAP2PLUS_MBOX
+	tristate "OMAP2+ Mailbox framework support"
+	depends on ARCH_OMAP2PLUS || ARCH_K3
+	help
+	  Mailbox implementation for OMAP family chips with hardware for
+	  interprocessor communication involving DSP, IVA1.0 and IVA2 in
+	  OMAP2/3; or IPU, IVA HD and DSP in OMAP4/5. Say Y here if you
+	  want to use OMAP2+ Mailbox framework support.
+
+config OMAP_MBOX_KFIFO_SIZE
+	int "Mailbox kfifo default buffer size (bytes)"
+	depends on OMAP2PLUS_MBOX
+	default 256
+	help
+	  Specify the default size of mailbox's kfifo buffers (bytes).
+	  This can also be changed at runtime (via the mbox_kfifo_size
+	  module parameter).
+
+config ROCKCHIP_MBOX
+	bool "Rockchip Soc Integrated Mailbox Support"
+	depends on ARCH_ROCKCHIP || COMPILE_TEST
+	help
+	  This driver provides support for inter-processor communication
+	  between CPU cores and MCU processor on Some Rockchip SOCs.
+	  Please check it that the Soc you use have Mailbox hardware.
+	  Say Y here if you want to use the Rockchip Mailbox support.
+
+config PCC
+	bool "Platform Communication Channel Driver"
+	depends on ACPI
+	default n
+	help
+	  ACPI 5.0+ spec defines a generic mode of communication
+	  between the OS and a platform such as the BMC. This medium
+	  (PCC) is typically used by CPPC (ACPI CPU Performance management),
+	  RAS (ACPI reliability protocol) and MPST (ACPI Memory power
+	  states). Select this driver if your platform implements the
+	  PCC clients mentioned above.
+
+config ALTERA_MBOX
+	tristate "Altera Mailbox"
+	depends on HAS_IOMEM
+	help
+	  An implementation of the Altera Mailbox soft core. It is used
+	  to send message between processors. Say Y here if you want to use the
+	  Altera mailbox support.
+
+config BCM2835_MBOX
+	tristate "BCM2835 Mailbox"
+	depends on ARCH_BCM2835
+	help
+	  An implementation of the BCM2385 Mailbox.  It is used to invoke
+	  the services of the Videocore. Say Y here if you want to use the
+	  BCM2835 Mailbox.
+
+config STI_MBOX
+	tristate "STI Mailbox framework support"
+	depends on ARCH_STI && OF
+	help
+	  Mailbox implementation for STMicroelectonics family chips with
+	  hardware for interprocessor communication.
+
+config TI_MESSAGE_MANAGER
+	tristate "Texas Instruments Message Manager Driver"
+	depends on ARCH_KEYSTONE || ARCH_K3
+	default ARCH_K3
+	help
+	  An implementation of Message Manager slave driver for Keystone
+	  and K3 architecture SoCs from Texas Instruments. Message Manager
+	  is a communication entity found on few of Texas Instrument's keystone
+	  and K3 architecture SoCs. These may be used for communication between
+	  multiple processors within the SoC. Select this driver if your
+	  platform has support for the hardware block.
+
+config HI3660_MBOX
+	tristate "Hi3660 Mailbox" if EXPERT
+	depends on (ARCH_HISI || COMPILE_TEST)
+	depends on OF
+	default ARCH_HISI
+	help
+	  An implementation of the hi3660 mailbox. It is used to send message
+	  between application processors and other processors/MCU/DSP. Select
+	  Y here if you want to use Hi3660 mailbox controller.
+
+config HI6220_MBOX
+	tristate "Hi6220 Mailbox" if EXPERT
+	depends on (ARCH_HISI || COMPILE_TEST)
+	depends on OF
+	default ARCH_HISI
+	help
+	  An implementation of the hi6220 mailbox. It is used to send message
+	  between application processors and MCU. Say Y here if you want to
+	  build Hi6220 mailbox controller driver.
+
+config MAILBOX_TEST
+	tristate "Mailbox Test Client"
+	depends on OF
+	depends on HAS_IOMEM
+	help
+	  Test client to help with testing new Controller driver
+	  implementations.
+
+config POLARFIRE_SOC_MAILBOX
+	tristate "PolarFire SoC (MPFS) Mailbox"
+	depends on HAS_IOMEM
+	depends on SOC_MICROCHIP_POLARFIRE || COMPILE_TEST
+	help
+	  This driver adds support for the PolarFire SoC (MPFS) mailbox controller.
+
+	  To compile this driver as a module, choose M here. the
+	  module will be called mailbox-mpfs.
+
+	  If unsure, say N.
+
+config QCOM_APCS_IPC
+	tristate "Qualcomm APCS IPC driver"
+	depends on ARCH_QCOM || COMPILE_TEST
+	help
+	  Say y here to enable support for the APCS IPC mailbox driver,
+	  providing an interface for invoking the inter-process communication
+	  signals from the application processor to other masters.
+
+config TEGRA_HSP_MBOX
+	bool "Tegra HSP (Hardware Synchronization Primitives) Driver"
+	depends on ARCH_TEGRA
+	help
+	  The Tegra HSP driver is used for the interprocessor communication
+	  between different remote processors and host processors on Tegra186
+	  and later SoCs. Say Y here if you want to have this support.
+	  If unsure say N.
+
+config XGENE_SLIMPRO_MBOX
+	tristate "APM SoC X-Gene SLIMpro Mailbox Controller"
+	depends on ARCH_XGENE
+	help
+	  An implementation of the APM X-Gene Interprocessor Communication
+	  Mailbox (IPCM) between the ARM 64-bit cores and SLIMpro controller.
+	  It is used to send short messages between ARM64-bit cores and
+	  the SLIMpro Management Engine, primarily for PM. Say Y here if you
+	  want to use the APM X-Gene SLIMpro IPCM support.
+
+config BCM_PDC_MBOX
+	tristate "Broadcom FlexSparx DMA Mailbox"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	help
+	  Mailbox implementation for the Broadcom FlexSparx DMA ring manager,
+	  which provides access to various offload engines on Broadcom
+	  SoCs, including FA2/FA+ on Northstar Plus and PDC on Northstar 2.
+
+config BCM_FLEXRM_MBOX
+	tristate "Broadcom FlexRM Mailbox"
+	depends on ARM64
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	select GENERIC_MSI_IRQ
+	default m if ARCH_BCM_IPROC
+	help
+	  Mailbox implementation of the Broadcom FlexRM ring manager,
+	  which provides access to various offload engines on Broadcom
+	  SoCs. Say Y here if you want to use the Broadcom FlexRM.
+
+config STM32_IPCC
+	tristate "STM32 IPCC Mailbox"
+	depends on MACH_STM32MP157 || COMPILE_TEST
+	help
+	  Mailbox implementation for STMicroelectonics STM32 family chips
+	  with hardware for Inter-Processor Communication Controller (IPCC)
+	  between processors. Say Y here if you want to have this support.
+
+config MTK_ADSP_MBOX
+	tristate "MediaTek ADSP Mailbox Controller"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	help
+          Say yes here to add support for "MediaTek ADSP Mailbox Controller.
+          This mailbox driver is used to send notification or short message
+          between processors with ADSP. It will place the message to share
+	  buffer and will access the ipc control.
+
+config MTK_CMDQ_MBOX
+	tristate "MediaTek CMDQ Mailbox Support"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	select MTK_INFRACFG
+	help
+	  Say yes here to add support for the MediaTek Command Queue (CMDQ)
+	  mailbox driver. The CMDQ is used to help read/write registers with
+	  critical time limitation, such as updating display configuration
+	  during the vblank.
+
+config ZYNQMP_IPI_MBOX
+	bool "Xilinx ZynqMP IPI Mailbox"
+	depends on ARCH_ZYNQMP && OF
+	help
+	  Say yes here to add support for Xilinx IPI mailbox driver.
+	  This mailbox driver is used to send notification or short message
+	  between processors with Xilinx ZynqMP IPI. It will place the
+	  message to the IPI buffer and will access the IPI control
+	  registers to kick the other processor or enquire status.
+
+config SUN6I_MSGBOX
+	tristate "Allwinner sun6i/sun8i/sun9i/sun50i Message Box"
+	depends on ARCH_SUNXI || COMPILE_TEST
+	default ARCH_SUNXI
+	help
+	  Mailbox implementation for the hardware message box present in
+	  various Allwinner SoCs. This mailbox is used for communication
+	  between the application CPUs and the power management coprocessor.
+
+config SPRD_MBOX
+	tristate "Spreadtrum Mailbox"
+	depends on ARCH_SPRD || COMPILE_TEST
+	help
+	  Mailbox driver implementation for the Spreadtrum platform. It is used
+	  to send message between application processors and MCU. Say Y here if
+	  you want to build the Spreatrum mailbox controller driver.
+
+config QCOM_IPCC
+	tristate "Qualcomm Technologies, Inc. IPCC driver"
+	depends on ARCH_QCOM || COMPILE_TEST
+	help
+	  Qualcomm Technologies, Inc. Inter-Processor Communication Controller
+	  (IPCC) driver for MSM devices. The driver provides mailbox support for
+	  sending interrupts to the clients. On the other hand, the driver also
+	  acts as an interrupt controller for receiving interrupts from clients.
+	  Say Y here if you want to build this driver.
+
+endif