Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 470 insertions, 0 deletions

diff --git a/drivers/media/cec/core/cec-core.c b/drivers/media/cec/core/cec-core.c
new file mode 100644
index 000000000..af358e901
--- /dev/null
+++ b/drivers/media/cec/core/cec-core.c
@@ -0,0 +1,470 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * cec-core.c - HDMI Consumer Electronics Control framework - Core
+ *
+ * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/kmod.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include "cec-priv.h"
+
+#define CEC_NUM_DEVICES	256
+#define CEC_NAME	"cec"
+
+/*
+ * 400 ms is the time it takes for one 16 byte message to be
+ * transferred and 5 is the maximum number of retries. Add
+ * another 100 ms as a margin. So if the transmit doesn't
+ * finish before that time something is really wrong and we
+ * have to time out.
+ *
+ * This is a sign that something it really wrong and a warning
+ * will be issued.
+ */
+#define CEC_XFER_TIMEOUT_MS (5 * 400 + 100)
+
+int cec_debug;
+module_param_named(debug, cec_debug, int, 0644);
+MODULE_PARM_DESC(debug, "debug level (0-2)");
+
+static bool debug_phys_addr;
+module_param(debug_phys_addr, bool, 0644);
+MODULE_PARM_DESC(debug_phys_addr, "add CEC_CAP_PHYS_ADDR if set");
+
+static dev_t cec_dev_t;
+
+/* Active devices */
+static DEFINE_MUTEX(cec_devnode_lock);
+static DECLARE_BITMAP(cec_devnode_nums, CEC_NUM_DEVICES);
+
+static struct dentry *top_cec_dir;
+
+/* dev to cec_devnode */
+#define to_cec_devnode(cd) container_of(cd, struct cec_devnode, dev)
+
+int cec_get_device(struct cec_devnode *devnode)
+{
+	/*
+	 * Check if the cec device is available. This needs to be done with
+	 * the devnode->lock held to prevent an open/unregister race:
+	 * without the lock, the device could be unregistered and freed between
+	 * the devnode->registered check and get_device() calls, leading to
+	 * a crash.
+	 */
+	mutex_lock(&devnode->lock);
+	/*
+	 * return ENXIO if the cec device has been removed
+	 * already or if it is not registered anymore.
+	 */
+	if (!devnode->registered) {
+		mutex_unlock(&devnode->lock);
+		return -ENXIO;
+	}
+	/* and increase the device refcount */
+	get_device(&devnode->dev);
+	mutex_unlock(&devnode->lock);
+	return 0;
+}
+
+void cec_put_device(struct cec_devnode *devnode)
+{
+	put_device(&devnode->dev);
+}
+
+/* Called when the last user of the cec device exits. */
+static void cec_devnode_release(struct device *cd)
+{
+	struct cec_devnode *devnode = to_cec_devnode(cd);
+
+	mutex_lock(&cec_devnode_lock);
+	/* Mark device node number as free */
+	clear_bit(devnode->minor, cec_devnode_nums);
+	mutex_unlock(&cec_devnode_lock);
+
+	cec_delete_adapter(to_cec_adapter(devnode));
+}
+
+static struct bus_type cec_bus_type = {
+	.name = CEC_NAME,
+};
+
+/*
+ * Register a cec device node
+ *
+ * The registration code assigns minor numbers and registers the new device node
+ * with the kernel. An error is returned if no free minor number can be found,
+ * or if the registration of the device node fails.
+ *
+ * Zero is returned on success.
+ *
+ * Note that if the cec_devnode_register call fails, the release() callback of
+ * the cec_devnode structure is *not* called, so the caller is responsible for
+ * freeing any data.
+ */
+static int __must_check cec_devnode_register(struct cec_devnode *devnode,
+					     struct module *owner)
+{
+	int minor;
+	int ret;
+
+	/* Part 1: Find a free minor number */
+	mutex_lock(&cec_devnode_lock);
+	minor = find_first_zero_bit(cec_devnode_nums, CEC_NUM_DEVICES);
+	if (minor == CEC_NUM_DEVICES) {
+		mutex_unlock(&cec_devnode_lock);
+		pr_err("could not get a free minor\n");
+		return -ENFILE;
+	}
+
+	set_bit(minor, cec_devnode_nums);
+	mutex_unlock(&cec_devnode_lock);
+
+	devnode->minor = minor;
+	devnode->dev.bus = &cec_bus_type;
+	devnode->dev.devt = MKDEV(MAJOR(cec_dev_t), minor);
+	devnode->dev.release = cec_devnode_release;
+	dev_set_name(&devnode->dev, "cec%d", devnode->minor);
+	device_initialize(&devnode->dev);
+
+	/* Part 2: Initialize and register the character device */
+	cdev_init(&devnode->cdev, &cec_devnode_fops);
+	devnode->cdev.owner = owner;
+	kobject_set_name(&devnode->cdev.kobj, "cec%d", devnode->minor);
+
+	devnode->registered = true;
+	ret = cdev_device_add(&devnode->cdev, &devnode->dev);
+	if (ret) {
+		devnode->registered = false;
+		pr_err("%s: cdev_device_add failed\n", __func__);
+		goto clr_bit;
+	}
+
+	return 0;
+
+clr_bit:
+	mutex_lock(&cec_devnode_lock);
+	clear_bit(devnode->minor, cec_devnode_nums);
+	mutex_unlock(&cec_devnode_lock);
+	return ret;
+}
+
+/*
+ * Unregister a cec device node
+ *
+ * This unregisters the passed device. Future open calls will be met with
+ * errors.
+ *
+ * This function can safely be called if the device node has never been
+ * registered or has already been unregistered.
+ */
+static void cec_devnode_unregister(struct cec_adapter *adap)
+{
+	struct cec_devnode *devnode = &adap->devnode;
+	struct cec_fh *fh;
+
+	mutex_lock(&devnode->lock);
+
+	/* Check if devnode was never registered or already unregistered */
+	if (!devnode->registered || devnode->unregistered) {
+		mutex_unlock(&devnode->lock);
+		return;
+	}
+	devnode->registered = false;
+	devnode->unregistered = true;
+
+	mutex_lock(&devnode->lock_fhs);
+	list_for_each_entry(fh, &devnode->fhs, list)
+		wake_up_interruptible(&fh->wait);
+	mutex_unlock(&devnode->lock_fhs);
+
+	mutex_unlock(&devnode->lock);
+
+	mutex_lock(&adap->lock);
+	__cec_s_phys_addr(adap, CEC_PHYS_ADDR_INVALID, false);
+	__cec_s_log_addrs(adap, NULL, false);
+	mutex_unlock(&adap->lock);
+
+	cdev_device_del(&devnode->cdev, &devnode->dev);
+	put_device(&devnode->dev);
+}
+
+#ifdef CONFIG_DEBUG_FS
+static ssize_t cec_error_inj_write(struct file *file,
+	const char __user *ubuf, size_t count, loff_t *ppos)
+{
+	struct seq_file *sf = file->private_data;
+	struct cec_adapter *adap = sf->private;
+	char *buf;
+	char *line;
+	char *p;
+
+	buf = memdup_user_nul(ubuf, min_t(size_t, PAGE_SIZE, count));
+	if (IS_ERR(buf))
+		return PTR_ERR(buf);
+	p = buf;
+	while (p && *p) {
+		p = skip_spaces(p);
+		line = strsep(&p, "\n");
+		if (!*line || *line == '#')
+			continue;
+		if (!call_op(adap, error_inj_parse_line, line)) {
+			kfree(buf);
+			return -EINVAL;
+		}
+	}
+	kfree(buf);
+	return count;
+}
+
+static int cec_error_inj_show(struct seq_file *sf, void *unused)
+{
+	struct cec_adapter *adap = sf->private;
+
+	return call_op(adap, error_inj_show, sf);
+}
+
+static int cec_error_inj_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, cec_error_inj_show, inode->i_private);
+}
+
+static const struct file_operations cec_error_inj_fops = {
+	.open = cec_error_inj_open,
+	.write = cec_error_inj_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+#endif
+
+struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops,
+					 void *priv, const char *name, u32 caps,
+					 u8 available_las)
+{
+	struct cec_adapter *adap;
+	int res;
+
+#ifndef CONFIG_MEDIA_CEC_RC
+	caps &= ~CEC_CAP_RC;
+#endif
+
+	if (WARN_ON(!caps))
+		return ERR_PTR(-EINVAL);
+	if (WARN_ON(!ops))
+		return ERR_PTR(-EINVAL);
+	if (WARN_ON(!available_las || available_las > CEC_MAX_LOG_ADDRS))
+		return ERR_PTR(-EINVAL);
+	adap = kzalloc(sizeof(*adap), GFP_KERNEL);
+	if (!adap)
+		return ERR_PTR(-ENOMEM);
+	strscpy(adap->name, name, sizeof(adap->name));
+	adap->phys_addr = CEC_PHYS_ADDR_INVALID;
+	adap->cec_pin_is_high = true;
+	adap->log_addrs.cec_version = CEC_OP_CEC_VERSION_2_0;
+	adap->log_addrs.vendor_id = CEC_VENDOR_ID_NONE;
+	adap->capabilities = caps;
+	if (debug_phys_addr)
+		adap->capabilities |= CEC_CAP_PHYS_ADDR;
+	adap->needs_hpd = caps & CEC_CAP_NEEDS_HPD;
+	adap->available_log_addrs = available_las;
+	adap->sequence = 0;
+	adap->ops = ops;
+	adap->priv = priv;
+	mutex_init(&adap->lock);
+	INIT_LIST_HEAD(&adap->transmit_queue);
+	INIT_LIST_HEAD(&adap->wait_queue);
+	init_waitqueue_head(&adap->kthread_waitq);
+
+	/* adap->devnode initialization */
+	INIT_LIST_HEAD(&adap->devnode.fhs);
+	mutex_init(&adap->devnode.lock_fhs);
+	mutex_init(&adap->devnode.lock);
+
+	adap->kthread = kthread_run(cec_thread_func, adap, "cec-%s", name);
+	if (IS_ERR(adap->kthread)) {
+		pr_err("cec-%s: kernel_thread() failed\n", name);
+		res = PTR_ERR(adap->kthread);
+		kfree(adap);
+		return ERR_PTR(res);
+	}
+
+#ifdef CONFIG_MEDIA_CEC_RC
+	if (!(caps & CEC_CAP_RC))
+		return adap;
+
+	/* Prepare the RC input device */
+	adap->rc = rc_allocate_device(RC_DRIVER_SCANCODE);
+	if (!adap->rc) {
+		pr_err("cec-%s: failed to allocate memory for rc_dev\n",
+		       name);
+		kthread_stop(adap->kthread);
+		kfree(adap);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	snprintf(adap->input_phys, sizeof(adap->input_phys),
+		 "%s/input0", adap->name);
+
+	adap->rc->device_name = adap->name;
+	adap->rc->input_phys = adap->input_phys;
+	adap->rc->input_id.bustype = BUS_CEC;
+	adap->rc->input_id.vendor = 0;
+	adap->rc->input_id.product = 0;
+	adap->rc->input_id.version = 1;
+	adap->rc->driver_name = CEC_NAME;
+	adap->rc->allowed_protocols = RC_PROTO_BIT_CEC;
+	adap->rc->priv = adap;
+	adap->rc->map_name = RC_MAP_CEC;
+	adap->rc->timeout = MS_TO_US(550);
+#endif
+	return adap;
+}
+EXPORT_SYMBOL_GPL(cec_allocate_adapter);
+
+int cec_register_adapter(struct cec_adapter *adap,
+			 struct device *parent)
+{
+	int res;
+
+	if (IS_ERR_OR_NULL(adap))
+		return 0;
+
+	if (WARN_ON(!parent))
+		return -EINVAL;
+
+	adap->owner = parent->driver->owner;
+	adap->devnode.dev.parent = parent;
+	if (!adap->xfer_timeout_ms)
+		adap->xfer_timeout_ms = CEC_XFER_TIMEOUT_MS;
+
+#ifdef CONFIG_MEDIA_CEC_RC
+	if (adap->capabilities & CEC_CAP_RC) {
+		adap->rc->dev.parent = parent;
+		res = rc_register_device(adap->rc);
+
+		if (res) {
+			pr_err("cec-%s: failed to prepare input device\n",
+			       adap->name);
+			rc_free_device(adap->rc);
+			adap->rc = NULL;
+			return res;
+		}
+	}
+#endif
+
+	res = cec_devnode_register(&adap->devnode, adap->owner);
+	if (res) {
+#ifdef CONFIG_MEDIA_CEC_RC
+		/* Note: rc_unregister also calls rc_free */
+		rc_unregister_device(adap->rc);
+		adap->rc = NULL;
+#endif
+		return res;
+	}
+
+	dev_set_drvdata(&adap->devnode.dev, adap);
+#ifdef CONFIG_DEBUG_FS
+	if (!top_cec_dir)
+		return 0;
+
+	adap->cec_dir = debugfs_create_dir(dev_name(&adap->devnode.dev),
+					   top_cec_dir);
+
+	debugfs_create_devm_seqfile(&adap->devnode.dev, "status", adap->cec_dir,
+				    cec_adap_status);
+
+	if (!adap->ops->error_inj_show || !adap->ops->error_inj_parse_line)
+		return 0;
+	debugfs_create_file("error-inj", 0644, adap->cec_dir, adap,
+			    &cec_error_inj_fops);
+#endif
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cec_register_adapter);
+
+void cec_unregister_adapter(struct cec_adapter *adap)
+{
+	if (IS_ERR_OR_NULL(adap))
+		return;
+
+#ifdef CONFIG_MEDIA_CEC_RC
+	/* Note: rc_unregister also calls rc_free */
+	rc_unregister_device(adap->rc);
+	adap->rc = NULL;
+#endif
+	debugfs_remove_recursive(adap->cec_dir);
+#ifdef CONFIG_CEC_NOTIFIER
+	cec_notifier_cec_adap_unregister(adap->notifier, adap);
+#endif
+	cec_devnode_unregister(adap);
+}
+EXPORT_SYMBOL_GPL(cec_unregister_adapter);
+
+void cec_delete_adapter(struct cec_adapter *adap)
+{
+	if (IS_ERR_OR_NULL(adap))
+		return;
+	if (adap->kthread_config)
+		kthread_stop(adap->kthread_config);
+	kthread_stop(adap->kthread);
+	if (adap->ops->adap_free)
+		adap->ops->adap_free(adap);
+#ifdef CONFIG_MEDIA_CEC_RC
+	rc_free_device(adap->rc);
+#endif
+	kfree(adap);
+}
+EXPORT_SYMBOL_GPL(cec_delete_adapter);
+
+/*
+ *	Initialise cec for linux
+ */
+static int __init cec_devnode_init(void)
+{
+	int ret = alloc_chrdev_region(&cec_dev_t, 0, CEC_NUM_DEVICES, CEC_NAME);
+
+	if (ret < 0) {
+		pr_warn("cec: unable to allocate major\n");
+		return ret;
+	}
+
+#ifdef CONFIG_DEBUG_FS
+	top_cec_dir = debugfs_create_dir("cec", NULL);
+	if (IS_ERR_OR_NULL(top_cec_dir)) {
+		pr_warn("cec: Failed to create debugfs cec dir\n");
+		top_cec_dir = NULL;
+	}
+#endif
+
+	ret = bus_register(&cec_bus_type);
+	if (ret < 0) {
+		unregister_chrdev_region(cec_dev_t, CEC_NUM_DEVICES);
+		pr_warn("cec: bus_register failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void __exit cec_devnode_exit(void)
+{
+	debugfs_remove_recursive(top_cec_dir);
+	bus_unregister(&cec_bus_type);
+	unregister_chrdev_region(cec_dev_t, CEC_NUM_DEVICES);
+}
+
+subsys_initcall(cec_devnode_init);
+module_exit(cec_devnode_exit)
+
+MODULE_AUTHOR("Hans Verkuil <hans.verkuil@cisco.com>");
+MODULE_DESCRIPTION("Device node registration for cec drivers");
+MODULE_LICENSE("GPL");