Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 957 insertions, 0 deletions

diff --git a/drivers/media/dvb-frontends/Kconfig b/drivers/media/dvb-frontends/Kconfig
new file mode 100644
index 000000000..2ef2ff2a3
--- /dev/null
+++ b/drivers/media/dvb-frontends/Kconfig
@@ -0,0 +1,957 @@
+# SPDX-License-Identifier: GPL-2.0
+
+if MEDIA_DIGITAL_TV_SUPPORT
+
+comment "DVB Frontend drivers auto-selected by 'Autoselect ancillary drivers'"
+	depends on MEDIA_HIDE_ANCILLARY_SUBDRV
+
+menu "Customise DVB Frontends"
+	visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
+
+comment "Multistandard (satellite) frontends"
+	depends on DVB_CORE
+
+config DVB_M88DS3103
+	tristate "Montage Technology M88DS3103"
+	depends on DVB_CORE && I2C && I2C_MUX
+	select REGMAP_I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y when you want to support this frontend.
+
+config DVB_MXL5XX
+	tristate "MaxLinear MxL5xx based tuner-demodulators"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  MaxLinear MxL5xx family of DVB-S/S2 tuners/demodulators.
+
+	  Say Y when you want to support these frontends.
+
+config DVB_STB0899
+	tristate "STB0899 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S/S2/DSS Multistandard demodulator. Say Y when you want
+	  to support this demodulator based frontends
+
+config DVB_STB6100
+	tristate "STB6100 based tuners"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A Silicon tuner from ST used in conjunction with the STB0899
+	  demodulator. Say Y when you want to support this tuner.
+
+config DVB_STV090x
+	tristate "STV0900/STV0903(A/B) based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  DVB-S/S2/DSS Multistandard Professional/Broadcast demodulators.
+	  Say Y when you want to support these frontends.
+
+config DVB_STV0910
+	tristate "STV0910 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  ST STV0910 DVB-S/S2 demodulator driver.
+
+	  Say Y when you want to support these frontends.
+
+config DVB_STV6110x
+	tristate "STV6110/(A) based tuners"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A Silicon tuner that supports DVB-S and DVB-S2 modes
+
+config DVB_STV6111
+	tristate "STV6111 based tuners"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A Silicon tuner that supports DVB-S and DVB-S2 modes
+
+	  Say Y when you want to support these frontends.
+
+comment "Multistandard (cable + terrestrial) frontends"
+	depends on DVB_CORE
+
+config DVB_DRXK
+	tristate "Micronas DRXK based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Micronas DRX-K DVB-C/T demodulator.
+
+	  Say Y when you want to support this frontend.
+
+config DVB_MN88472
+	tristate "Panasonic MN88472"
+	depends on DVB_CORE && I2C
+	select REGMAP_I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y when you want to support this frontend.
+
+config DVB_MN88473
+	tristate "Panasonic MN88473"
+	depends on DVB_CORE && I2C
+	select REGMAP_I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y when you want to support this frontend.
+
+config DVB_SI2165
+	tristate "Silicon Labs si2165 based"
+	depends on DVB_CORE && I2C
+	select REGMAP_I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-C/T demodulator.
+
+	  Say Y when you want to support this frontend.
+
+config DVB_TDA18271C2DD
+	tristate "NXP TDA18271C2 silicon tuner"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  NXP TDA18271 silicon tuner.
+
+	  Say Y when you want to support this tuner.
+
+comment "DVB-S (satellite) frontends"
+	depends on DVB_CORE
+
+config DVB_CX24110
+	tristate "Conexant CX24110 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S tuner module. Say Y when you want to support this frontend.
+
+config DVB_CX24116
+	tristate "Conexant CX24116 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S/S2 tuner module. Say Y when you want to support this frontend.
+
+config DVB_CX24117
+	tristate "Conexant CX24117 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A Dual DVB-S/S2 tuner module. Say Y when you want to support this frontend.
+
+config DVB_CX24120
+	tristate "Conexant CX24120 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S/S2 tuner module. Say Y when you want to support this frontend.
+
+config DVB_CX24123
+	tristate "Conexant CX24123 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S tuner module. Say Y when you want to support this frontend.
+
+config DVB_DS3000
+	tristate "Montage Tehnology DS3000 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S/S2 tuner module. Say Y when you want to support this frontend.
+
+config DVB_MB86A16
+	tristate "Fujitsu MB86A16 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S/DSS Direct Conversion reveiver.
+	  Say Y when you want to support this frontend.
+
+config DVB_MT312
+	tristate "Zarlink VP310/MT312/ZL10313 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S tuner module. Say Y when you want to support this frontend.
+
+config DVB_S5H1420
+	tristate "Samsung S5H1420 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S tuner module. Say Y when you want to support this frontend.
+
+config DVB_SI21XX
+	tristate "Silicon Labs SI21XX based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S tuner module. Say Y when you want to support this frontend.
+
+config DVB_STB6000
+	tristate "ST STB6000 silicon tuner"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S silicon tuner module. Say Y when you want to support this tuner.
+
+config DVB_STV0288
+	tristate "ST STV0288 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S tuner module. Say Y when you want to support this frontend.
+
+config DVB_STV0299
+	tristate "ST STV0299 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S tuner module. Say Y when you want to support this frontend.
+
+config DVB_STV0900
+	tristate "ST STV0900 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S/S2 demodulator. Say Y when you want to support this frontend.
+
+config DVB_STV6110
+	tristate "ST STV6110 silicon tuner"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S silicon tuner module. Say Y when you want to support this tuner.
+
+config DVB_TDA10071
+	tristate "NXP TDA10071"
+	depends on DVB_CORE && I2C
+	select REGMAP_I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y when you want to support this frontend.
+
+config DVB_TDA10086
+	tristate "Philips TDA10086 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S tuner module. Say Y when you want to support this frontend.
+
+config DVB_TDA8083
+	tristate "Philips TDA8083 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S tuner module. Say Y when you want to support this frontend.
+
+config DVB_TDA8261
+	tristate "Philips TDA8261 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S tuner module. Say Y when you want to support this frontend.
+
+config DVB_TDA826X
+	tristate "Philips TDA826X silicon tuner"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S silicon tuner module. Say Y when you want to support this tuner.
+
+config DVB_TS2020
+	tristate "Montage Tehnology TS2020 based tuners"
+	depends on DVB_CORE && I2C
+	select REGMAP_I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S/S2 silicon tuner. Say Y when you want to support this tuner.
+
+config DVB_TUA6100
+	tristate "Infineon TUA6100 PLL"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S PLL chip.
+
+config DVB_TUNER_CX24113
+	tristate "Conexant CX24113/CX24128 tuner for DVB-S/DSS"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S tuner module. Say Y when you want to support this frontend.
+
+config DVB_TUNER_ITD1000
+	tristate "Integrant ITD1000 Zero IF tuner for DVB-S/DSS"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S tuner module. Say Y when you want to support this frontend.
+
+config DVB_VES1X93
+	tristate "VLSI VES1893 or VES1993 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S tuner module. Say Y when you want to support this frontend.
+
+config DVB_ZL10036
+	tristate "Zarlink ZL10036 silicon tuner"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S tuner module. Say Y when you want to support this frontend.
+
+config DVB_ZL10039
+	tristate "Zarlink ZL10039 silicon tuner"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S tuner module. Say Y when you want to support this frontend.
+
+comment "DVB-T (terrestrial) frontends"
+	depends on DVB_CORE
+
+config DVB_AF9013
+	tristate "Afatech AF9013 demodulator"
+	depends on DVB_CORE && I2C && I2C_MUX
+	select REGMAP
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y when you want to support this frontend.
+
+config DVB_AS102_FE
+	tristate
+	depends on DVB_CORE
+	default DVB_AS102
+
+config DVB_CX22700
+	tristate "Conexant CX22700 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-T tuner module. Say Y when you want to support this frontend.
+
+config DVB_CX22702
+	tristate "Conexant cx22702 demodulator (OFDM)"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-T tuner module. Say Y when you want to support this frontend.
+
+config DVB_CXD2820R
+	tristate "Sony CXD2820R"
+	depends on DVB_CORE && I2C
+	select REGMAP_I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y when you want to support this frontend.
+
+config DVB_CXD2841ER
+	tristate "Sony CXD2841ER"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y when you want to support this frontend.
+
+config DVB_DIB3000MB
+	tristate "DiBcom 3000M-B"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-T tuner module. Designed for mobile usage. Say Y when you want
+	  to support this frontend.
+
+config DVB_DIB3000MC
+	tristate "DiBcom 3000P/M-C"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-T tuner module. Designed for mobile usage. Say Y when you want
+	  to support this frontend.
+
+config DVB_DIB7000M
+	tristate "DiBcom 7000MA/MB/PA/PB/MC"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-T tuner module. Designed for mobile usage. Say Y when you want
+	  to support this frontend.
+
+config DVB_DIB7000P
+	tristate "DiBcom 7000PC"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-T tuner module. Designed for mobile usage. Say Y when you want
+	  to support this frontend.
+
+config DVB_DIB9000
+	tristate "DiBcom 9000"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-T tuner module. Designed for mobile usage. Say Y when you want
+	  to support this frontend.
+
+config DVB_DRXD
+	tristate "Micronas DRXD driver"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-T tuner module. Say Y when you want to support this frontend.
+
+	  Note: this driver was based on vendor driver reference code (released
+	  under the GPL) as opposed to the existing drx397xd driver, which
+	  was written via reverse engineering.
+
+config DVB_EC100
+	tristate "E3C EC100"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y when you want to support this frontend.
+
+config DVB_GP8PSK_FE
+	tristate
+	depends on DVB_CORE
+	default DVB_USB_GP8PSK
+
+config DVB_L64781
+	tristate "LSI L64781"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-T tuner module. Say Y when you want to support this frontend.
+
+config DVB_MT352
+	tristate "Zarlink MT352 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-T tuner module. Say Y when you want to support this frontend.
+
+config DVB_NXT6000
+	tristate "NxtWave Communications NXT6000 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-T tuner module. Say Y when you want to support this frontend.
+
+config DVB_RTL2830
+	tristate "Realtek RTL2830 DVB-T"
+	depends on DVB_CORE && I2C && I2C_MUX
+	select REGMAP
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y when you want to support this frontend.
+
+config DVB_RTL2832
+	tristate "Realtek RTL2832 DVB-T"
+	depends on DVB_CORE && I2C && I2C_MUX
+	select REGMAP_I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y when you want to support this frontend.
+
+config DVB_RTL2832_SDR
+	tristate "Realtek RTL2832 SDR"
+	depends on DVB_CORE && I2C && I2C_MUX && VIDEO_DEV && MEDIA_SDR_SUPPORT && USB
+	select DVB_RTL2832
+	select VIDEOBUF2_VMALLOC
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y when you want to support this SDR module.
+
+config DVB_S5H1432
+	tristate "Samsung s5h1432 demodulator (OFDM)"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-T tuner module. Say Y when you want to support this frontend.
+
+config DVB_SI2168
+	tristate "Silicon Labs Si2168"
+	depends on DVB_CORE && I2C && I2C_MUX
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y when you want to support this frontend.
+
+config DVB_SP887X
+	tristate "Spase sp887x based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-T tuner module. Say Y when you want to support this frontend.
+
+	  This driver needs external firmware. Please use the command
+	  "<kerneldir>/scripts/get_dvb_firmware sp887x" to
+	  download/extract it, and then copy it to /usr/lib/hotplug/firmware
+	  or /lib/firmware (depending on configuration of firmware hotplug).
+
+config DVB_STV0367
+	tristate "ST STV0367 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-T/C tuner module. Say Y when you want to support this frontend.
+
+config DVB_TDA10048
+	tristate "Philips TDA10048HN based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-T tuner module. Say Y when you want to support this frontend.
+
+config DVB_TDA1004X
+	tristate "Philips TDA10045H/TDA10046H based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-T tuner module. Say Y when you want to support this frontend.
+
+	  This driver needs external firmware. Please use the commands
+	  "<kerneldir>/scripts/get_dvb_firmware tda10045",
+	  "<kerneldir>/scripts/get_dvb_firmware tda10046" to
+	  download/extract them, and then copy them to /usr/lib/hotplug/firmware
+	  or /lib/firmware (depending on configuration of firmware hotplug).
+
+config DVB_ZD1301_DEMOD
+	tristate "ZyDAS ZD1301"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y when you want to support this frontend.
+
+config DVB_ZL10353
+	tristate "Zarlink ZL10353 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-T tuner module. Say Y when you want to support this frontend.
+
+source "drivers/media/dvb-frontends/cxd2880/Kconfig"
+
+comment "DVB-C (cable) frontends"
+	depends on DVB_CORE
+
+config DVB_STV0297
+	tristate "ST STV0297 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-C tuner module. Say Y when you want to support this frontend.
+
+config DVB_TDA10021
+	tristate "Philips TDA10021 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-C tuner module. Say Y when you want to support this frontend.
+
+config DVB_TDA10023
+	tristate "Philips TDA10023 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-C tuner module. Say Y when you want to support this frontend.
+
+config DVB_VES1820
+	tristate "VLSI VES1820 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-C tuner module. Say Y when you want to support this frontend.
+
+comment "ATSC (North American/Korean Terrestrial/Cable DTV) frontends"
+	depends on DVB_CORE
+
+config DVB_AU8522
+	depends on DVB_CORE && I2C
+	tristate
+
+config DVB_AU8522_DTV
+	tristate "Auvitek AU8522 based DTV demod"
+	depends on DVB_CORE && I2C
+	select DVB_AU8522
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  An ATSC 8VSB, QAM64/256 & NTSC demodulator module. Say Y when
+	  you want to enable DTV demodulation support for this frontend.
+
+config DVB_AU8522_V4L
+	tristate "Auvitek AU8522 based ATV demod"
+	depends on VIDEO_DEV && DVB_CORE && I2C
+	select DVB_AU8522
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  An ATSC 8VSB, QAM64/256 & NTSC demodulator module. Say Y when
+	  you want to enable ATV demodulation support for this frontend.
+
+config DVB_BCM3510
+	tristate "Broadcom BCM3510"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  An ATSC 8VSB/16VSB and QAM64/256 tuner module. Say Y when you want to
+	  support this frontend.
+
+config DVB_LG2160
+	tristate "LG Electronics LG216x based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  An ATSC/MH demodulator module. Say Y when you want
+	  to support this frontend.
+
+config DVB_LGDT3305
+	tristate "LG Electronics LGDT3304 and LGDT3305 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
+	  to support this frontend.
+
+config DVB_LGDT3306A
+	tristate "LG Electronics LGDT3306A based"
+	depends on DVB_CORE && I2C && I2C_MUX
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  An ATSC 8VSB and QAM-B 64/256 demodulator module. Say Y when you want
+	  to support this frontend.
+
+config DVB_LGDT330X
+	tristate "LG Electronics LGDT3302/LGDT3303 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
+	  to support this frontend.
+
+config DVB_MXL692
+	tristate "MaxLinear MXL692 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  MaxLinear MxL692 is a combo tuner-demodulator that
+	  supports ATSC 8VSB and QAM modes. Say Y when you want to
+	  support this frontend.
+
+config DVB_NXT200X
+	tristate "NxtWave Communications NXT2002/NXT2004 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
+	  to support this frontend.
+
+	  This driver needs external firmware. Please use the commands
+	  "<kerneldir>/scripts/get_dvb_firmware nxt2002" and
+	  "<kerneldir>/scripts/get_dvb_firmware nxt2004" to
+	  download/extract them, and then copy them to /usr/lib/hotplug/firmware
+	  or /lib/firmware (depending on configuration of firmware hotplug).
+
+config DVB_OR51132
+	tristate "Oren OR51132 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
+	  to support this frontend.
+
+	  This driver needs external firmware. Please use the commands
+	  "<kerneldir>/scripts/get_dvb_firmware or51132_vsb" and/or
+	  "<kerneldir>/scripts/get_dvb_firmware or51132_qam" to
+	  download firmwares for 8VSB and QAM64/256, respectively. Copy them to
+	  /usr/lib/hotplug/firmware or /lib/firmware (depending on
+	  configuration of firmware hotplug).
+
+config DVB_OR51211
+	tristate "Oren OR51211 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
+
+	  This driver needs external firmware. Please use the command
+	  "<kerneldir>/scripts/get_dvb_firmware or51211" to
+	  download it, and then copy it to /usr/lib/hotplug/firmware
+	  or /lib/firmware (depending on configuration of firmware hotplug).
+
+config DVB_S5H1409
+	tristate "Samsung S5H1409 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
+	  to support this frontend.
+
+config DVB_S5H1411
+	tristate "Samsung S5H1411 based"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
+	  to support this frontend.
+
+comment "ISDB-T (terrestrial) frontends"
+	depends on DVB_CORE
+
+config DVB_DIB8000
+	tristate "DiBcom 8000MB/MC"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A driver for DiBcom's DiB8000 ISDB-T/ISDB-Tsb demodulator.
+	  Say Y when you want to support this frontend.
+
+config DVB_MB86A20S
+	tristate "Fujitsu mb86a20s"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A driver for Fujitsu mb86a20s ISDB-T/ISDB-Tsb demodulator.
+	  Say Y when you want to support this frontend.
+
+config DVB_S921
+	tristate "Sharp S921 frontend"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  AN ISDB-T DQPSK, QPSK, 16QAM and 64QAM 1seg tuner module.
+	  Say Y when you want to support this frontend.
+
+comment "ISDB-S (satellite) & ISDB-T (terrestrial) frontends"
+	depends on DVB_CORE
+
+config DVB_MN88443X
+	tristate "Socionext MN88443x"
+	depends on DVB_CORE && I2C
+	select REGMAP_I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A driver for Socionext/Panasonic MN884433 and MN884434
+	  ISDB-S + ISDB-T demodulator.
+	  Say Y when you want to support this frontend.
+
+config DVB_TC90522
+	tristate "Toshiba TC90522"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Toshiba TC90522 2xISDB-S 8PSK + 2xISDB-T OFDM demodulator.
+	  Say Y when you want to support this frontend.
+
+comment "Digital terrestrial only tuners/PLL"
+	depends on DVB_CORE
+
+config DVB_PLL
+	tristate "Generic I2C PLL based tuners"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  This module drives a number of tuners based on PLL chips with a
+	  common I2C interface. Say Y when you want to support these tuners.
+
+config DVB_TUNER_DIB0070
+	tristate "DiBcom DiB0070 silicon base-band tuner"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A driver for the silicon baseband tuner DiB0070 from DiBcom.
+	  This device is only used inside a SiP called together with a
+	  demodulator for now.
+
+config DVB_TUNER_DIB0090
+	tristate "DiBcom DiB0090 silicon base-band tuner"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A driver for the silicon baseband tuner DiB0090 from DiBcom.
+	  This device is only used inside a SiP called together with a
+	  demodulator for now.
+
+comment "SEC control devices for DVB-S"
+	depends on DVB_CORE
+
+config DVB_A8293
+	tristate "Allegro A8293"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+
+config DVB_AF9033
+	tristate "Afatech AF9033 DVB-T demodulator"
+	depends on DVB_CORE && I2C
+	select REGMAP_I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+
+config DVB_ASCOT2E
+	tristate "Sony Ascot2E tuner"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y when you want to support this frontend.
+
+config DVB_ATBM8830
+	tristate "AltoBeam ATBM8830/8831 DMB-TH demodulator"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DMB-TH tuner module. Say Y when you want to support this frontend.
+
+config DVB_HELENE
+	tristate "Sony HELENE Sat/Ter tuner (CXD2858ER)"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y when you want to support this frontend.
+
+config DVB_HORUS3A
+	tristate "Sony Horus3A tuner"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y when you want to support this frontend.
+
+config DVB_ISL6405
+	tristate "ISL6405 SEC controller"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  An SEC control chip.
+
+config DVB_ISL6421
+	tristate "ISL6421 SEC controller"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  An SEC control chip.
+
+config DVB_ISL6423
+	tristate "ISL6423 SEC controller"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A SEC controller chip from Intersil
+
+config DVB_IX2505V
+	tristate "Sharp IX2505V silicon tuner"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S tuner module. Say Y when you want to support this frontend.
+
+config DVB_LGS8GL5
+	tristate "Silicon Legend LGS-8GL5 demodulator (OFDM)"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DMB-TH tuner module. Say Y when you want to support this frontend.
+
+config DVB_LGS8GXX
+	tristate "Legend Silicon LGS8913/LGS8GL5/LGS8GXX DMB-TH demodulator"
+	depends on DVB_CORE && I2C
+	select FW_LOADER
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DMB-TH tuner module. Say Y when you want to support this frontend.
+
+config DVB_LNBH25
+	tristate "LNBH25 SEC controller"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  An SEC control chip.
+	  Say Y when you want to support this chip.
+
+config DVB_LNBH29
+	tristate "LNBH29 SEC controller"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  LNB power supply and control voltage
+	  regulator chip with step-up converter
+	  and I2C interface for STMicroelectronics LNBH29.
+	  Say Y when you want to support this chip.
+
+config DVB_LNBP21
+	tristate "LNBP21/LNBH24 SEC controllers"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  An SEC control chips.
+
+config DVB_LNBP22
+	tristate "LNBP22 SEC controllers"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  LNB power supply and control voltage
+	  regulator chip with step-up converter
+	  and I2C interface.
+	  Say Y when you want to support this chip.
+
+config DVB_M88RS2000
+	tristate "M88RS2000 DVB-S demodulator and tuner"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A DVB-S tuner module.
+	  Say Y when you want to support this frontend.
+
+config DVB_TDA665x
+	tristate "TDA665x tuner"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Support for tuner modules based on Philips TDA6650/TDA6651 chips.
+	  Say Y when you want to support this chip.
+
+	  Currently supported tuners:
+	  * Panasonic ENV57H12D5 (ET-50DT)
+
+source "drivers/media/dvb-frontends/drx39xyj/Kconfig"
+
+comment "Common Interface (EN50221) controller drivers"
+	depends on DVB_CORE
+
+config DVB_CXD2099
+	tristate "Sony CXD2099AR Common Interface driver"
+	depends on DVB_CORE && I2C
+	select REGMAP_I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  A driver for the CI controller currently found mostly on
+	  Digital Devices DuoFlex CI (single) addon modules.
+
+	  Say Y when you want to support these devices.
+
+config DVB_SP2
+	tristate "CIMaX SP2"
+	depends on DVB_CORE && I2C
+	default m if !MEDIA_SUBDRV_AUTOSELECT
+	help
+	  CIMaX SP2/SP2HF Common Interface module.
+
+endmenu # Customise DVB Frontends
+
+endif # MEDIA_DIGITAL_TV_SUPPORT
+
+comment "Tools to develop new frontends"
+	depends on MEDIA_TEST_SUPPORT
+
+config DVB_DUMMY_FE
+	tristate "Dummy frontend driver"
+	depends on MEDIA_TEST_SUPPORT && DVB_CORE
+	help
+	  Dummy skeleton frontend driver.