Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 508 insertions, 0 deletions

diff --git a/drivers/media/dvb-frontends/dibx000_common.c b/drivers/media/dvb-frontends/dibx000_common.c
new file mode 100644
index 000000000..63a4c6a4a
--- /dev/null
+++ b/drivers/media/dvb-frontends/dibx000_common.c
@@ -0,0 +1,508 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/module.h>
+
+#include "dibx000_common.h"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
+
+#define dprintk(fmt, arg...) do {					\
+	if (debug)							\
+		printk(KERN_DEBUG pr_fmt("%s: " fmt),			\
+		       __func__, ##arg);				\
+} while (0)
+
+static int dibx000_write_word(struct dibx000_i2c_master *mst, u16 reg, u16 val)
+{
+	int ret;
+
+	if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) {
+		dprintk("could not acquire lock\n");
+		return -EINVAL;
+	}
+
+	mst->i2c_write_buffer[0] = (reg >> 8) & 0xff;
+	mst->i2c_write_buffer[1] = reg & 0xff;
+	mst->i2c_write_buffer[2] = (val >> 8) & 0xff;
+	mst->i2c_write_buffer[3] = val & 0xff;
+
+	memset(mst->msg, 0, sizeof(struct i2c_msg));
+	mst->msg[0].addr = mst->i2c_addr;
+	mst->msg[0].flags = 0;
+	mst->msg[0].buf = mst->i2c_write_buffer;
+	mst->msg[0].len = 4;
+
+	ret = i2c_transfer(mst->i2c_adap, mst->msg, 1) != 1 ? -EREMOTEIO : 0;
+	mutex_unlock(&mst->i2c_buffer_lock);
+
+	return ret;
+}
+
+static u16 dibx000_read_word(struct dibx000_i2c_master *mst, u16 reg)
+{
+	u16 ret;
+
+	if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) {
+		dprintk("could not acquire lock\n");
+		return 0;
+	}
+
+	mst->i2c_write_buffer[0] = reg >> 8;
+	mst->i2c_write_buffer[1] = reg & 0xff;
+
+	memset(mst->msg, 0, 2 * sizeof(struct i2c_msg));
+	mst->msg[0].addr = mst->i2c_addr;
+	mst->msg[0].flags = 0;
+	mst->msg[0].buf = mst->i2c_write_buffer;
+	mst->msg[0].len = 2;
+	mst->msg[1].addr = mst->i2c_addr;
+	mst->msg[1].flags = I2C_M_RD;
+	mst->msg[1].buf = mst->i2c_read_buffer;
+	mst->msg[1].len = 2;
+
+	if (i2c_transfer(mst->i2c_adap, mst->msg, 2) != 2)
+		dprintk("i2c read error on %d\n", reg);
+
+	ret = (mst->i2c_read_buffer[0] << 8) | mst->i2c_read_buffer[1];
+	mutex_unlock(&mst->i2c_buffer_lock);
+
+	return ret;
+}
+
+static int dibx000_is_i2c_done(struct dibx000_i2c_master *mst)
+{
+	int i = 100;
+	u16 status;
+
+	while (((status = dibx000_read_word(mst, mst->base_reg + 2)) & 0x0100) == 0 && --i > 0)
+		;
+
+	/* i2c timed out */
+	if (i == 0)
+		return -EREMOTEIO;
+
+	/* no acknowledge */
+	if ((status & 0x0080) == 0)
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int dibx000_master_i2c_write(struct dibx000_i2c_master *mst, struct i2c_msg *msg, u8 stop)
+{
+	u16 data;
+	u16 da;
+	u16 i;
+	u16 txlen = msg->len, len;
+	const u8 *b = msg->buf;
+
+	while (txlen) {
+		dibx000_read_word(mst, mst->base_reg + 2);
+
+		len = txlen > 8 ? 8 : txlen;
+		for (i = 0; i < len; i += 2) {
+			data = *b++ << 8;
+			if (i+1 < len)
+				data |= *b++;
+			dibx000_write_word(mst, mst->base_reg, data);
+		}
+		da = (((u8) (msg->addr))  << 9) |
+			(1           << 8) |
+			(1           << 7) |
+			(0           << 6) |
+			(0           << 5) |
+			((len & 0x7) << 2) |
+			(0           << 1) |
+			(0           << 0);
+
+		if (txlen == msg->len)
+			da |= 1 << 5; /* start */
+
+		if (txlen-len == 0 && stop)
+			da |= 1 << 6; /* stop */
+
+		dibx000_write_word(mst, mst->base_reg+1, da);
+
+		if (dibx000_is_i2c_done(mst) != 0)
+			return -EREMOTEIO;
+		txlen -= len;
+	}
+
+	return 0;
+}
+
+static int dibx000_master_i2c_read(struct dibx000_i2c_master *mst, struct i2c_msg *msg)
+{
+	u16 da;
+	u8 *b = msg->buf;
+	u16 rxlen = msg->len, len;
+
+	while (rxlen) {
+		len = rxlen > 8 ? 8 : rxlen;
+		da = (((u8) (msg->addr)) << 9) |
+			(1           << 8) |
+			(1           << 7) |
+			(0           << 6) |
+			(0           << 5) |
+			((len & 0x7) << 2) |
+			(1           << 1) |
+			(0           << 0);
+
+		if (rxlen == msg->len)
+			da |= 1 << 5; /* start */
+
+		if (rxlen-len == 0)
+			da |= 1 << 6; /* stop */
+		dibx000_write_word(mst, mst->base_reg+1, da);
+
+		if (dibx000_is_i2c_done(mst) != 0)
+			return -EREMOTEIO;
+
+		rxlen -= len;
+
+		while (len) {
+			da = dibx000_read_word(mst, mst->base_reg);
+			*b++ = (da >> 8) & 0xff;
+			len--;
+			if (len >= 1) {
+				*b++ =  da   & 0xff;
+				len--;
+			}
+		}
+	}
+
+	return 0;
+}
+
+int dibx000_i2c_set_speed(struct i2c_adapter *i2c_adap, u16 speed)
+{
+	struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap);
+
+	if (mst->device_rev < DIB7000MC && speed < 235)
+		speed = 235;
+	return dibx000_write_word(mst, mst->base_reg + 3, (u16)(60000 / speed));
+
+}
+EXPORT_SYMBOL(dibx000_i2c_set_speed);
+
+static u32 dibx000_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C;
+}
+
+static int dibx000_i2c_select_interface(struct dibx000_i2c_master *mst,
+					enum dibx000_i2c_interface intf)
+{
+	if (mst->device_rev > DIB3000MC && mst->selected_interface != intf) {
+		dprintk("selecting interface: %d\n", intf);
+		mst->selected_interface = intf;
+		return dibx000_write_word(mst, mst->base_reg + 4, intf);
+	}
+	return 0;
+}
+
+static int dibx000_i2c_master_xfer_gpio12(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num)
+{
+	struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap);
+	int msg_index;
+	int ret = 0;
+
+	dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_GPIO_1_2);
+	for (msg_index = 0; msg_index < num; msg_index++) {
+		if (msg[msg_index].flags & I2C_M_RD) {
+			ret = dibx000_master_i2c_read(mst, &msg[msg_index]);
+			if (ret != 0)
+				return 0;
+		} else {
+			ret = dibx000_master_i2c_write(mst, &msg[msg_index], 1);
+			if (ret != 0)
+				return 0;
+		}
+	}
+
+	return num;
+}
+
+static int dibx000_i2c_master_xfer_gpio34(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num)
+{
+	struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap);
+	int msg_index;
+	int ret = 0;
+
+	dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_GPIO_3_4);
+	for (msg_index = 0; msg_index < num; msg_index++) {
+		if (msg[msg_index].flags & I2C_M_RD) {
+			ret = dibx000_master_i2c_read(mst, &msg[msg_index]);
+			if (ret != 0)
+				return 0;
+		} else {
+			ret = dibx000_master_i2c_write(mst, &msg[msg_index], 1);
+			if (ret != 0)
+				return 0;
+		}
+	}
+
+	return num;
+}
+
+static struct i2c_algorithm dibx000_i2c_master_gpio12_xfer_algo = {
+	.master_xfer = dibx000_i2c_master_xfer_gpio12,
+	.functionality = dibx000_i2c_func,
+};
+
+static struct i2c_algorithm dibx000_i2c_master_gpio34_xfer_algo = {
+	.master_xfer = dibx000_i2c_master_xfer_gpio34,
+	.functionality = dibx000_i2c_func,
+};
+
+static int dibx000_i2c_gate_ctrl(struct dibx000_i2c_master *mst, u8 tx[4],
+				 u8 addr, int onoff)
+{
+	u16 val;
+
+
+	if (onoff)
+		val = addr << 8;	// bit 7 = use master or not, if 0, the gate is open
+	else
+		val = 1 << 7;
+
+	if (mst->device_rev > DIB7000)
+		val <<= 1;
+
+	tx[0] = (((mst->base_reg + 1) >> 8) & 0xff);
+	tx[1] = ((mst->base_reg + 1) & 0xff);
+	tx[2] = val >> 8;
+	tx[3] = val & 0xff;
+
+	return 0;
+}
+
+static int dibx000_i2c_gated_gpio67_xfer(struct i2c_adapter *i2c_adap,
+					struct i2c_msg msg[], int num)
+{
+	struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap);
+	int ret;
+
+	if (num > 32) {
+		dprintk("%s: too much I2C message to be transmitted (%i). Maximum is 32",
+			__func__, num);
+		return -ENOMEM;
+	}
+
+	dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_GPIO_6_7);
+
+	if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) {
+		dprintk("could not acquire lock\n");
+		return -EINVAL;
+	}
+
+	memset(mst->msg, 0, sizeof(struct i2c_msg) * (2 + num));
+
+	/* open the gate */
+	dibx000_i2c_gate_ctrl(mst, &mst->i2c_write_buffer[0], msg[0].addr, 1);
+	mst->msg[0].addr = mst->i2c_addr;
+	mst->msg[0].buf = &mst->i2c_write_buffer[0];
+	mst->msg[0].len = 4;
+
+	memcpy(&mst->msg[1], msg, sizeof(struct i2c_msg) * num);
+
+	/* close the gate */
+	dibx000_i2c_gate_ctrl(mst, &mst->i2c_write_buffer[4], 0, 0);
+	mst->msg[num + 1].addr = mst->i2c_addr;
+	mst->msg[num + 1].buf = &mst->i2c_write_buffer[4];
+	mst->msg[num + 1].len = 4;
+
+	ret = (i2c_transfer(mst->i2c_adap, mst->msg, 2 + num) == 2 + num ?
+			num : -EIO);
+
+	mutex_unlock(&mst->i2c_buffer_lock);
+	return ret;
+}
+
+static struct i2c_algorithm dibx000_i2c_gated_gpio67_algo = {
+	.master_xfer = dibx000_i2c_gated_gpio67_xfer,
+	.functionality = dibx000_i2c_func,
+};
+
+static int dibx000_i2c_gated_tuner_xfer(struct i2c_adapter *i2c_adap,
+					struct i2c_msg msg[], int num)
+{
+	struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap);
+	int ret;
+
+	if (num > 32) {
+		dprintk("%s: too much I2C message to be transmitted (%i). Maximum is 32",
+			__func__, num);
+		return -ENOMEM;
+	}
+
+	dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_TUNER);
+
+	if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) {
+		dprintk("could not acquire lock\n");
+		return -EINVAL;
+	}
+	memset(mst->msg, 0, sizeof(struct i2c_msg) * (2 + num));
+
+	/* open the gate */
+	dibx000_i2c_gate_ctrl(mst, &mst->i2c_write_buffer[0], msg[0].addr, 1);
+	mst->msg[0].addr = mst->i2c_addr;
+	mst->msg[0].buf = &mst->i2c_write_buffer[0];
+	mst->msg[0].len = 4;
+
+	memcpy(&mst->msg[1], msg, sizeof(struct i2c_msg) * num);
+
+	/* close the gate */
+	dibx000_i2c_gate_ctrl(mst, &mst->i2c_write_buffer[4], 0, 0);
+	mst->msg[num + 1].addr = mst->i2c_addr;
+	mst->msg[num + 1].buf = &mst->i2c_write_buffer[4];
+	mst->msg[num + 1].len = 4;
+
+	ret = (i2c_transfer(mst->i2c_adap, mst->msg, 2 + num) == 2 + num ?
+			num : -EIO);
+	mutex_unlock(&mst->i2c_buffer_lock);
+	return ret;
+}
+
+static struct i2c_algorithm dibx000_i2c_gated_tuner_algo = {
+	.master_xfer = dibx000_i2c_gated_tuner_xfer,
+	.functionality = dibx000_i2c_func,
+};
+
+struct i2c_adapter *dibx000_get_i2c_adapter(struct dibx000_i2c_master *mst,
+						enum dibx000_i2c_interface intf,
+						int gating)
+{
+	struct i2c_adapter *i2c = NULL;
+
+	switch (intf) {
+	case DIBX000_I2C_INTERFACE_TUNER:
+		if (gating)
+			i2c = &mst->gated_tuner_i2c_adap;
+		break;
+	case DIBX000_I2C_INTERFACE_GPIO_1_2:
+		if (!gating)
+			i2c = &mst->master_i2c_adap_gpio12;
+		break;
+	case DIBX000_I2C_INTERFACE_GPIO_3_4:
+		if (!gating)
+			i2c = &mst->master_i2c_adap_gpio34;
+		break;
+	case DIBX000_I2C_INTERFACE_GPIO_6_7:
+		if (gating)
+			i2c = &mst->master_i2c_adap_gpio67;
+		break;
+	default:
+		pr_err("incorrect I2C interface selected\n");
+		break;
+	}
+
+	return i2c;
+}
+
+EXPORT_SYMBOL(dibx000_get_i2c_adapter);
+
+void dibx000_reset_i2c_master(struct dibx000_i2c_master *mst)
+{
+	/* initialize the i2c-master by closing the gate */
+	u8 tx[4];
+	struct i2c_msg m = {.addr = mst->i2c_addr,.buf = tx,.len = 4 };
+
+	dibx000_i2c_gate_ctrl(mst, tx, 0, 0);
+	i2c_transfer(mst->i2c_adap, &m, 1);
+	mst->selected_interface = 0xff;	// the first time force a select of the I2C
+	dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_TUNER);
+}
+
+EXPORT_SYMBOL(dibx000_reset_i2c_master);
+
+static int i2c_adapter_init(struct i2c_adapter *i2c_adap,
+				struct i2c_algorithm *algo, const char *name,
+				struct dibx000_i2c_master *mst)
+{
+	strscpy(i2c_adap->name, name, sizeof(i2c_adap->name));
+	i2c_adap->algo = algo;
+	i2c_adap->algo_data = NULL;
+	i2c_set_adapdata(i2c_adap, mst);
+	if (i2c_add_adapter(i2c_adap) < 0)
+		return -ENODEV;
+	return 0;
+}
+
+int dibx000_init_i2c_master(struct dibx000_i2c_master *mst, u16 device_rev,
+				struct i2c_adapter *i2c_adap, u8 i2c_addr)
+{
+	int ret;
+
+	mutex_init(&mst->i2c_buffer_lock);
+	if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) {
+		dprintk("could not acquire lock\n");
+		return -EINVAL;
+	}
+	memset(mst->msg, 0, sizeof(struct i2c_msg));
+	mst->msg[0].addr = i2c_addr >> 1;
+	mst->msg[0].flags = 0;
+	mst->msg[0].buf = mst->i2c_write_buffer;
+	mst->msg[0].len = 4;
+
+	mst->device_rev = device_rev;
+	mst->i2c_adap = i2c_adap;
+	mst->i2c_addr = i2c_addr >> 1;
+
+	if (device_rev == DIB7000P || device_rev == DIB8000)
+		mst->base_reg = 1024;
+	else
+		mst->base_reg = 768;
+
+	mst->gated_tuner_i2c_adap.dev.parent = mst->i2c_adap->dev.parent;
+	if (i2c_adapter_init
+			(&mst->gated_tuner_i2c_adap, &dibx000_i2c_gated_tuner_algo,
+			 "DiBX000 tuner I2C bus", mst) != 0)
+		pr_err("could not initialize the tuner i2c_adapter\n");
+
+	mst->master_i2c_adap_gpio12.dev.parent = mst->i2c_adap->dev.parent;
+	if (i2c_adapter_init
+			(&mst->master_i2c_adap_gpio12, &dibx000_i2c_master_gpio12_xfer_algo,
+			 "DiBX000 master GPIO12 I2C bus", mst) != 0)
+		pr_err("could not initialize the master i2c_adapter\n");
+
+	mst->master_i2c_adap_gpio34.dev.parent = mst->i2c_adap->dev.parent;
+	if (i2c_adapter_init
+			(&mst->master_i2c_adap_gpio34, &dibx000_i2c_master_gpio34_xfer_algo,
+			 "DiBX000 master GPIO34 I2C bus", mst) != 0)
+		pr_err("could not initialize the master i2c_adapter\n");
+
+	mst->master_i2c_adap_gpio67.dev.parent = mst->i2c_adap->dev.parent;
+	if (i2c_adapter_init
+			(&mst->master_i2c_adap_gpio67, &dibx000_i2c_gated_gpio67_algo,
+			 "DiBX000 master GPIO67 I2C bus", mst) != 0)
+		pr_err("could not initialize the master i2c_adapter\n");
+
+	/* initialize the i2c-master by closing the gate */
+	dibx000_i2c_gate_ctrl(mst, mst->i2c_write_buffer, 0, 0);
+
+	ret = (i2c_transfer(i2c_adap, mst->msg, 1) == 1);
+	mutex_unlock(&mst->i2c_buffer_lock);
+
+	return ret;
+}
+
+EXPORT_SYMBOL(dibx000_init_i2c_master);
+
+void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst)
+{
+	i2c_del_adapter(&mst->gated_tuner_i2c_adap);
+	i2c_del_adapter(&mst->master_i2c_adap_gpio12);
+	i2c_del_adapter(&mst->master_i2c_adap_gpio34);
+	i2c_del_adapter(&mst->master_i2c_adap_gpio67);
+}
+EXPORT_SYMBOL(dibx000_exit_i2c_master);
+
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
+MODULE_DESCRIPTION("Common function the DiBcom demodulator family");
+MODULE_LICENSE("GPL");