Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 416 insertions, 0 deletions

diff --git a/drivers/media/platform/rockchip/rga/rga-hw.c b/drivers/media/platform/rockchip/rga/rga-hw.c
new file mode 100644
index 000000000..aaa96f256
--- /dev/null
+++ b/drivers/media/platform/rockchip/rga/rga-hw.c
@@ -0,0 +1,416 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
+ * Author: Jacob Chen <jacob-chen@iotwrt.com>
+ */
+
+#include <linux/pm_runtime.h>
+
+#include "rga-hw.h"
+#include "rga.h"
+
+enum e_rga_start_pos {
+	LT = 0,
+	LB = 1,
+	RT = 2,
+	RB = 3,
+};
+
+struct rga_addr_offset {
+	unsigned int y_off;
+	unsigned int u_off;
+	unsigned int v_off;
+};
+
+struct rga_corners_addr_offset {
+	struct rga_addr_offset left_top;
+	struct rga_addr_offset right_top;
+	struct rga_addr_offset left_bottom;
+	struct rga_addr_offset right_bottom;
+};
+
+static unsigned int rga_get_scaling(unsigned int src, unsigned int dst)
+{
+	/*
+	 * The rga hw scaling factor is a normalized inverse of the
+	 * scaling factor.
+	 * For example: When source width is 100 and destination width is 200
+	 * (scaling of 2x), then the hw factor is NC * 100 / 200.
+	 * The normalization factor (NC) is 2^16 = 0x10000.
+	 */
+
+	return (src > dst) ? ((dst << 16) / src) : ((src << 16) / dst);
+}
+
+static struct rga_corners_addr_offset
+rga_get_addr_offset(struct rga_frame *frm, unsigned int x, unsigned int y,
+		    unsigned int w, unsigned int h)
+{
+	struct rga_corners_addr_offset offsets;
+	struct rga_addr_offset *lt, *lb, *rt, *rb;
+	unsigned int x_div = 0,
+		     y_div = 0, uv_stride = 0, pixel_width = 0, uv_factor = 0;
+
+	lt = &offsets.left_top;
+	lb = &offsets.left_bottom;
+	rt = &offsets.right_top;
+	rb = &offsets.right_bottom;
+
+	x_div = frm->fmt->x_div;
+	y_div = frm->fmt->y_div;
+	uv_factor = frm->fmt->uv_factor;
+	uv_stride = frm->stride / x_div;
+	pixel_width = frm->stride / frm->width;
+
+	lt->y_off = y * frm->stride + x * pixel_width;
+	lt->u_off =
+		frm->width * frm->height + (y / y_div) * uv_stride + x / x_div;
+	lt->v_off = lt->u_off + frm->width * frm->height / uv_factor;
+
+	lb->y_off = lt->y_off + (h - 1) * frm->stride;
+	lb->u_off = lt->u_off + (h / y_div - 1) * uv_stride;
+	lb->v_off = lt->v_off + (h / y_div - 1) * uv_stride;
+
+	rt->y_off = lt->y_off + (w - 1) * pixel_width;
+	rt->u_off = lt->u_off + w / x_div - 1;
+	rt->v_off = lt->v_off + w / x_div - 1;
+
+	rb->y_off = lb->y_off + (w - 1) * pixel_width;
+	rb->u_off = lb->u_off + w / x_div - 1;
+	rb->v_off = lb->v_off + w / x_div - 1;
+
+	return offsets;
+}
+
+static struct rga_addr_offset *rga_lookup_draw_pos(struct
+		rga_corners_addr_offset
+		* offsets, u32 rotate_mode,
+		u32 mirr_mode)
+{
+	static enum e_rga_start_pos rot_mir_point_matrix[4][4] = {
+		{
+			LT, RT, LB, RB,
+		},
+		{
+			RT, LT, RB, LB,
+		},
+		{
+			RB, LB, RT, LT,
+		},
+		{
+			LB, RB, LT, RT,
+		},
+	};
+
+	if (!offsets)
+		return NULL;
+
+	switch (rot_mir_point_matrix[rotate_mode][mirr_mode]) {
+	case LT:
+		return &offsets->left_top;
+	case LB:
+		return &offsets->left_bottom;
+	case RT:
+		return &offsets->right_top;
+	case RB:
+		return &offsets->right_bottom;
+	}
+
+	return NULL;
+}
+
+static void rga_cmd_set_src_addr(struct rga_ctx *ctx, void *mmu_pages)
+{
+	struct rockchip_rga *rga = ctx->rga;
+	u32 *dest = rga->cmdbuf_virt;
+	unsigned int reg;
+
+	reg = RGA_MMU_SRC_BASE - RGA_MODE_BASE_REG;
+	dest[reg >> 2] = virt_to_phys(mmu_pages) >> 4;
+
+	reg = RGA_MMU_CTRL1 - RGA_MODE_BASE_REG;
+	dest[reg >> 2] |= 0x7;
+}
+
+static void rga_cmd_set_src1_addr(struct rga_ctx *ctx, void *mmu_pages)
+{
+	struct rockchip_rga *rga = ctx->rga;
+	u32 *dest = rga->cmdbuf_virt;
+	unsigned int reg;
+
+	reg = RGA_MMU_SRC1_BASE - RGA_MODE_BASE_REG;
+	dest[reg >> 2] = virt_to_phys(mmu_pages) >> 4;
+
+	reg = RGA_MMU_CTRL1 - RGA_MODE_BASE_REG;
+	dest[reg >> 2] |= 0x7 << 4;
+}
+
+static void rga_cmd_set_dst_addr(struct rga_ctx *ctx, void *mmu_pages)
+{
+	struct rockchip_rga *rga = ctx->rga;
+	u32 *dest = rga->cmdbuf_virt;
+	unsigned int reg;
+
+	reg = RGA_MMU_DST_BASE - RGA_MODE_BASE_REG;
+	dest[reg >> 2] = virt_to_phys(mmu_pages) >> 4;
+
+	reg = RGA_MMU_CTRL1 - RGA_MODE_BASE_REG;
+	dest[reg >> 2] |= 0x7 << 8;
+}
+
+static void rga_cmd_set_trans_info(struct rga_ctx *ctx)
+{
+	struct rockchip_rga *rga = ctx->rga;
+	u32 *dest = rga->cmdbuf_virt;
+	unsigned int scale_dst_w, scale_dst_h;
+	unsigned int src_h, src_w, src_x, src_y, dst_h, dst_w, dst_x, dst_y;
+	union rga_src_info src_info;
+	union rga_dst_info dst_info;
+	union rga_src_x_factor x_factor;
+	union rga_src_y_factor y_factor;
+	union rga_src_vir_info src_vir_info;
+	union rga_src_act_info src_act_info;
+	union rga_dst_vir_info dst_vir_info;
+	union rga_dst_act_info dst_act_info;
+
+	struct rga_addr_offset *dst_offset;
+	struct rga_corners_addr_offset offsets;
+	struct rga_corners_addr_offset src_offsets;
+
+	src_h = ctx->in.crop.height;
+	src_w = ctx->in.crop.width;
+	src_x = ctx->in.crop.left;
+	src_y = ctx->in.crop.top;
+	dst_h = ctx->out.crop.height;
+	dst_w = ctx->out.crop.width;
+	dst_x = ctx->out.crop.left;
+	dst_y = ctx->out.crop.top;
+
+	src_info.val = dest[(RGA_SRC_INFO - RGA_MODE_BASE_REG) >> 2];
+	dst_info.val = dest[(RGA_DST_INFO - RGA_MODE_BASE_REG) >> 2];
+	x_factor.val = dest[(RGA_SRC_X_FACTOR - RGA_MODE_BASE_REG) >> 2];
+	y_factor.val = dest[(RGA_SRC_Y_FACTOR - RGA_MODE_BASE_REG) >> 2];
+	src_vir_info.val = dest[(RGA_SRC_VIR_INFO - RGA_MODE_BASE_REG) >> 2];
+	src_act_info.val = dest[(RGA_SRC_ACT_INFO - RGA_MODE_BASE_REG) >> 2];
+	dst_vir_info.val = dest[(RGA_DST_VIR_INFO - RGA_MODE_BASE_REG) >> 2];
+	dst_act_info.val = dest[(RGA_DST_ACT_INFO - RGA_MODE_BASE_REG) >> 2];
+
+	src_info.data.format = ctx->in.fmt->hw_format;
+	src_info.data.swap = ctx->in.fmt->color_swap;
+	dst_info.data.format = ctx->out.fmt->hw_format;
+	dst_info.data.swap = ctx->out.fmt->color_swap;
+
+	/*
+	 * CSC mode must only be set when the colorspace families differ between
+	 * input and output. It must remain unset (zeroed) if both are the same.
+	 */
+
+	if (RGA_COLOR_FMT_IS_YUV(ctx->in.fmt->hw_format) &&
+	    RGA_COLOR_FMT_IS_RGB(ctx->out.fmt->hw_format)) {
+		switch (ctx->in.colorspace) {
+		case V4L2_COLORSPACE_REC709:
+			src_info.data.csc_mode = RGA_SRC_CSC_MODE_BT709_R0;
+			break;
+		default:
+			src_info.data.csc_mode = RGA_SRC_CSC_MODE_BT601_R0;
+			break;
+		}
+	}
+
+	if (RGA_COLOR_FMT_IS_RGB(ctx->in.fmt->hw_format) &&
+	    RGA_COLOR_FMT_IS_YUV(ctx->out.fmt->hw_format)) {
+		switch (ctx->out.colorspace) {
+		case V4L2_COLORSPACE_REC709:
+			dst_info.data.csc_mode = RGA_SRC_CSC_MODE_BT709_R0;
+			break;
+		default:
+			dst_info.data.csc_mode = RGA_DST_CSC_MODE_BT601_R0;
+			break;
+		}
+	}
+
+	if (ctx->vflip)
+		src_info.data.mir_mode |= RGA_SRC_MIRR_MODE_X;
+
+	if (ctx->hflip)
+		src_info.data.mir_mode |= RGA_SRC_MIRR_MODE_Y;
+
+	switch (ctx->rotate) {
+	case 90:
+		src_info.data.rot_mode = RGA_SRC_ROT_MODE_90_DEGREE;
+		break;
+	case 180:
+		src_info.data.rot_mode = RGA_SRC_ROT_MODE_180_DEGREE;
+		break;
+	case 270:
+		src_info.data.rot_mode = RGA_SRC_ROT_MODE_270_DEGREE;
+		break;
+	default:
+		src_info.data.rot_mode = RGA_SRC_ROT_MODE_0_DEGREE;
+		break;
+	}
+
+	/*
+	 * Calculate the up/down scaling mode/factor.
+	 *
+	 * RGA used to scale the picture first, and then rotate second,
+	 * so we need to swap the w/h when rotate degree is 90/270.
+	 */
+	if (src_info.data.rot_mode == RGA_SRC_ROT_MODE_90_DEGREE ||
+	    src_info.data.rot_mode == RGA_SRC_ROT_MODE_270_DEGREE) {
+		if (rga->version.major == 0 || rga->version.minor == 0) {
+			if (dst_w == src_h)
+				src_h -= 8;
+			if (abs(src_w - dst_h) < 16)
+				src_w -= 16;
+		}
+
+		scale_dst_h = dst_w;
+		scale_dst_w = dst_h;
+	} else {
+		scale_dst_w = dst_w;
+		scale_dst_h = dst_h;
+	}
+
+	if (src_w == scale_dst_w) {
+		src_info.data.hscl_mode = RGA_SRC_HSCL_MODE_NO;
+		x_factor.val = 0;
+	} else if (src_w > scale_dst_w) {
+		src_info.data.hscl_mode = RGA_SRC_HSCL_MODE_DOWN;
+		x_factor.data.down_scale_factor =
+			rga_get_scaling(src_w, scale_dst_w) + 1;
+	} else {
+		src_info.data.hscl_mode = RGA_SRC_HSCL_MODE_UP;
+		x_factor.data.up_scale_factor =
+			rga_get_scaling(src_w - 1, scale_dst_w - 1);
+	}
+
+	if (src_h == scale_dst_h) {
+		src_info.data.vscl_mode = RGA_SRC_VSCL_MODE_NO;
+		y_factor.val = 0;
+	} else if (src_h > scale_dst_h) {
+		src_info.data.vscl_mode = RGA_SRC_VSCL_MODE_DOWN;
+		y_factor.data.down_scale_factor =
+			rga_get_scaling(src_h, scale_dst_h) + 1;
+	} else {
+		src_info.data.vscl_mode = RGA_SRC_VSCL_MODE_UP;
+		y_factor.data.up_scale_factor =
+			rga_get_scaling(src_h - 1, scale_dst_h - 1);
+	}
+
+	/*
+	 * Calculate the framebuffer virtual strides and active size,
+	 * note that the step of vir_stride / vir_width is 4 byte words
+	 */
+	src_vir_info.data.vir_stride = ctx->in.stride >> 2;
+	src_vir_info.data.vir_width = ctx->in.stride >> 2;
+
+	src_act_info.data.act_height = src_h - 1;
+	src_act_info.data.act_width = src_w - 1;
+
+	dst_vir_info.data.vir_stride = ctx->out.stride >> 2;
+	dst_act_info.data.act_height = dst_h - 1;
+	dst_act_info.data.act_width = dst_w - 1;
+
+	/*
+	 * Calculate the source framebuffer base address with offset pixel.
+	 */
+	src_offsets = rga_get_addr_offset(&ctx->in, src_x, src_y,
+					  src_w, src_h);
+
+	/*
+	 * Configure the dest framebuffer base address with pixel offset.
+	 */
+	offsets = rga_get_addr_offset(&ctx->out, dst_x, dst_y, dst_w, dst_h);
+	dst_offset = rga_lookup_draw_pos(&offsets, src_info.data.rot_mode,
+					 src_info.data.mir_mode);
+
+	dest[(RGA_SRC_Y_RGB_BASE_ADDR - RGA_MODE_BASE_REG) >> 2] =
+		src_offsets.left_top.y_off;
+	dest[(RGA_SRC_CB_BASE_ADDR - RGA_MODE_BASE_REG) >> 2] =
+		src_offsets.left_top.u_off;
+	dest[(RGA_SRC_CR_BASE_ADDR - RGA_MODE_BASE_REG) >> 2] =
+		src_offsets.left_top.v_off;
+
+	dest[(RGA_SRC_X_FACTOR - RGA_MODE_BASE_REG) >> 2] = x_factor.val;
+	dest[(RGA_SRC_Y_FACTOR - RGA_MODE_BASE_REG) >> 2] = y_factor.val;
+	dest[(RGA_SRC_VIR_INFO - RGA_MODE_BASE_REG) >> 2] = src_vir_info.val;
+	dest[(RGA_SRC_ACT_INFO - RGA_MODE_BASE_REG) >> 2] = src_act_info.val;
+
+	dest[(RGA_SRC_INFO - RGA_MODE_BASE_REG) >> 2] = src_info.val;
+
+	dest[(RGA_DST_Y_RGB_BASE_ADDR - RGA_MODE_BASE_REG) >> 2] =
+		dst_offset->y_off;
+	dest[(RGA_DST_CB_BASE_ADDR - RGA_MODE_BASE_REG) >> 2] =
+		dst_offset->u_off;
+	dest[(RGA_DST_CR_BASE_ADDR - RGA_MODE_BASE_REG) >> 2] =
+		dst_offset->v_off;
+
+	dest[(RGA_DST_VIR_INFO - RGA_MODE_BASE_REG) >> 2] = dst_vir_info.val;
+	dest[(RGA_DST_ACT_INFO - RGA_MODE_BASE_REG) >> 2] = dst_act_info.val;
+
+	dest[(RGA_DST_INFO - RGA_MODE_BASE_REG) >> 2] = dst_info.val;
+}
+
+static void rga_cmd_set_mode(struct rga_ctx *ctx)
+{
+	struct rockchip_rga *rga = ctx->rga;
+	u32 *dest = rga->cmdbuf_virt;
+	union rga_mode_ctrl mode;
+	union rga_alpha_ctrl0 alpha_ctrl0;
+	union rga_alpha_ctrl1 alpha_ctrl1;
+
+	mode.val = 0;
+	alpha_ctrl0.val = 0;
+	alpha_ctrl1.val = 0;
+
+	mode.data.gradient_sat = 1;
+	mode.data.render = RGA_MODE_RENDER_BITBLT;
+	mode.data.bitblt = RGA_MODE_BITBLT_MODE_SRC_TO_DST;
+
+	/* disable alpha blending */
+	dest[(RGA_ALPHA_CTRL0 - RGA_MODE_BASE_REG) >> 2] = alpha_ctrl0.val;
+	dest[(RGA_ALPHA_CTRL1 - RGA_MODE_BASE_REG) >> 2] = alpha_ctrl1.val;
+
+	dest[(RGA_MODE_CTRL - RGA_MODE_BASE_REG) >> 2] = mode.val;
+}
+
+static void rga_cmd_set(struct rga_ctx *ctx)
+{
+	struct rockchip_rga *rga = ctx->rga;
+
+	memset(rga->cmdbuf_virt, 0, RGA_CMDBUF_SIZE * 4);
+
+	rga_cmd_set_src_addr(ctx, rga->src_mmu_pages);
+	/*
+	 * Due to hardware bug,
+	 * src1 mmu also should be configured when using alpha blending.
+	 */
+	rga_cmd_set_src1_addr(ctx, rga->dst_mmu_pages);
+
+	rga_cmd_set_dst_addr(ctx, rga->dst_mmu_pages);
+	rga_cmd_set_mode(ctx);
+
+	rga_cmd_set_trans_info(ctx);
+
+	rga_write(rga, RGA_CMD_BASE, rga->cmdbuf_phy);
+
+	/* sync CMD buf for RGA */
+	dma_sync_single_for_device(rga->dev, rga->cmdbuf_phy,
+		PAGE_SIZE, DMA_BIDIRECTIONAL);
+}
+
+void rga_hw_start(struct rockchip_rga *rga)
+{
+	struct rga_ctx *ctx = rga->curr;
+
+	rga_cmd_set(ctx);
+
+	rga_write(rga, RGA_SYS_CTRL, 0x00);
+
+	rga_write(rga, RGA_SYS_CTRL, 0x22);
+
+	rga_write(rga, RGA_INT, 0x600);
+
+	rga_write(rga, RGA_CMD_CTRL, 0x1);
+}