Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 346 insertions, 0 deletions

diff --git a/drivers/media/platform/samsung/exynos4-is/fimc-lite-reg.c b/drivers/media/platform/samsung/exynos4-is/fimc-lite-reg.c
new file mode 100644
index 000000000..57996b410
--- /dev/null
+++ b/drivers/media/platform/samsung/exynos4-is/fimc-lite-reg.c
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Register interface file for EXYNOS FIMC-LITE (camera interface) driver
+ *
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd.
+ * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
+*/
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <media/drv-intf/exynos-fimc.h>
+
+#include "fimc-lite-reg.h"
+#include "fimc-lite.h"
+#include "fimc-core.h"
+
+#define FLITE_RESET_TIMEOUT 50 /* in ms */
+
+void flite_hw_reset(struct fimc_lite *dev)
+{
+	unsigned long end = jiffies + msecs_to_jiffies(FLITE_RESET_TIMEOUT);
+	u32 cfg;
+
+	cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+	cfg |= FLITE_REG_CIGCTRL_SWRST_REQ;
+	writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+
+	while (time_is_after_jiffies(end)) {
+		cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+		if (cfg & FLITE_REG_CIGCTRL_SWRST_RDY)
+			break;
+		usleep_range(1000, 5000);
+	}
+
+	cfg |= FLITE_REG_CIGCTRL_SWRST;
+	writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+}
+
+void flite_hw_clear_pending_irq(struct fimc_lite *dev)
+{
+	u32 cfg = readl(dev->regs + FLITE_REG_CISTATUS);
+	cfg &= ~FLITE_REG_CISTATUS_IRQ_CAM;
+	writel(cfg, dev->regs + FLITE_REG_CISTATUS);
+}
+
+u32 flite_hw_get_interrupt_source(struct fimc_lite *dev)
+{
+	u32 intsrc = readl(dev->regs + FLITE_REG_CISTATUS);
+	return intsrc & FLITE_REG_CISTATUS_IRQ_MASK;
+}
+
+void flite_hw_clear_last_capture_end(struct fimc_lite *dev)
+{
+
+	u32 cfg = readl(dev->regs + FLITE_REG_CISTATUS2);
+	cfg &= ~FLITE_REG_CISTATUS2_LASTCAPEND;
+	writel(cfg, dev->regs + FLITE_REG_CISTATUS2);
+}
+
+void flite_hw_set_interrupt_mask(struct fimc_lite *dev)
+{
+	u32 cfg, intsrc;
+
+	/* Select interrupts to be enabled for each output mode */
+	if (atomic_read(&dev->out_path) == FIMC_IO_DMA) {
+		intsrc = FLITE_REG_CIGCTRL_IRQ_OVFEN |
+			 FLITE_REG_CIGCTRL_IRQ_LASTEN |
+			 FLITE_REG_CIGCTRL_IRQ_STARTEN |
+			 FLITE_REG_CIGCTRL_IRQ_ENDEN;
+	} else {
+		/* An output to the FIMC-IS */
+		intsrc = FLITE_REG_CIGCTRL_IRQ_OVFEN |
+			 FLITE_REG_CIGCTRL_IRQ_LASTEN;
+	}
+
+	cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+	cfg |= FLITE_REG_CIGCTRL_IRQ_DISABLE_MASK;
+	cfg &= ~intsrc;
+	writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+}
+
+void flite_hw_capture_start(struct fimc_lite *dev)
+{
+	u32 cfg = readl(dev->regs + FLITE_REG_CIIMGCPT);
+	cfg |= FLITE_REG_CIIMGCPT_IMGCPTEN;
+	writel(cfg, dev->regs + FLITE_REG_CIIMGCPT);
+}
+
+void flite_hw_capture_stop(struct fimc_lite *dev)
+{
+	u32 cfg = readl(dev->regs + FLITE_REG_CIIMGCPT);
+	cfg &= ~FLITE_REG_CIIMGCPT_IMGCPTEN;
+	writel(cfg, dev->regs + FLITE_REG_CIIMGCPT);
+}
+
+/*
+ * Test pattern (color bars) enable/disable. External sensor
+ * pixel clock must be active for the test pattern to work.
+ */
+void flite_hw_set_test_pattern(struct fimc_lite *dev, bool on)
+{
+	u32 cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+	if (on)
+		cfg |= FLITE_REG_CIGCTRL_TEST_PATTERN_COLORBAR;
+	else
+		cfg &= ~FLITE_REG_CIGCTRL_TEST_PATTERN_COLORBAR;
+	writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+}
+
+static const u32 src_pixfmt_map[8][3] = {
+	{ MEDIA_BUS_FMT_YUYV8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_YCBYCR,
+	  FLITE_REG_CIGCTRL_YUV422_1P },
+	{ MEDIA_BUS_FMT_YVYU8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_YCRYCB,
+	  FLITE_REG_CIGCTRL_YUV422_1P },
+	{ MEDIA_BUS_FMT_UYVY8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_CBYCRY,
+	  FLITE_REG_CIGCTRL_YUV422_1P },
+	{ MEDIA_BUS_FMT_VYUY8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_CRYCBY,
+	  FLITE_REG_CIGCTRL_YUV422_1P },
+	{ MEDIA_BUS_FMT_SGRBG8_1X8, 0, FLITE_REG_CIGCTRL_RAW8 },
+	{ MEDIA_BUS_FMT_SGRBG10_1X10, 0, FLITE_REG_CIGCTRL_RAW10 },
+	{ MEDIA_BUS_FMT_SGRBG12_1X12, 0, FLITE_REG_CIGCTRL_RAW12 },
+	{ MEDIA_BUS_FMT_JPEG_1X8, 0, FLITE_REG_CIGCTRL_USER(1) },
+};
+
+/* Set camera input pixel format and resolution */
+void flite_hw_set_source_format(struct fimc_lite *dev, struct flite_frame *f)
+{
+	u32 pixelcode = f->fmt->mbus_code;
+	int i = ARRAY_SIZE(src_pixfmt_map);
+	u32 cfg;
+
+	while (--i) {
+		if (src_pixfmt_map[i][0] == pixelcode)
+			break;
+	}
+
+	if (i == 0 && src_pixfmt_map[i][0] != pixelcode) {
+		v4l2_err(&dev->ve.vdev,
+			 "Unsupported pixel code, falling back to %#08x\n",
+			 src_pixfmt_map[i][0]);
+	}
+
+	cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+	cfg &= ~FLITE_REG_CIGCTRL_FMT_MASK;
+	cfg |= src_pixfmt_map[i][2];
+	writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+
+	cfg = readl(dev->regs + FLITE_REG_CISRCSIZE);
+	cfg &= ~(FLITE_REG_CISRCSIZE_ORDER422_MASK |
+		 FLITE_REG_CISRCSIZE_SIZE_CAM_MASK);
+	cfg |= (f->f_width << 16) | f->f_height;
+	cfg |= src_pixfmt_map[i][1];
+	writel(cfg, dev->regs + FLITE_REG_CISRCSIZE);
+}
+
+/* Set the camera host input window offsets (cropping) */
+void flite_hw_set_window_offset(struct fimc_lite *dev, struct flite_frame *f)
+{
+	u32 hoff2, voff2;
+	u32 cfg;
+
+	cfg = readl(dev->regs + FLITE_REG_CIWDOFST);
+	cfg &= ~FLITE_REG_CIWDOFST_OFST_MASK;
+	cfg |= (f->rect.left << 16) | f->rect.top;
+	cfg |= FLITE_REG_CIWDOFST_WINOFSEN;
+	writel(cfg, dev->regs + FLITE_REG_CIWDOFST);
+
+	hoff2 = f->f_width - f->rect.width - f->rect.left;
+	voff2 = f->f_height - f->rect.height - f->rect.top;
+
+	cfg = (hoff2 << 16) | voff2;
+	writel(cfg, dev->regs + FLITE_REG_CIWDOFST2);
+}
+
+/* Select camera port (A, B) */
+static void flite_hw_set_camera_port(struct fimc_lite *dev, int id)
+{
+	u32 cfg = readl(dev->regs + FLITE_REG_CIGENERAL);
+	if (id == 0)
+		cfg &= ~FLITE_REG_CIGENERAL_CAM_B;
+	else
+		cfg |= FLITE_REG_CIGENERAL_CAM_B;
+	writel(cfg, dev->regs + FLITE_REG_CIGENERAL);
+}
+
+/* Select serial or parallel bus, camera port (A,B) and set signals polarity */
+void flite_hw_set_camera_bus(struct fimc_lite *dev,
+			     struct fimc_source_info *si)
+{
+	u32 cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+	unsigned int flags = si->flags;
+
+	if (si->sensor_bus_type != FIMC_BUS_TYPE_MIPI_CSI2) {
+		cfg &= ~(FLITE_REG_CIGCTRL_SELCAM_MIPI |
+			 FLITE_REG_CIGCTRL_INVPOLPCLK |
+			 FLITE_REG_CIGCTRL_INVPOLVSYNC |
+			 FLITE_REG_CIGCTRL_INVPOLHREF);
+
+		if (flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
+			cfg |= FLITE_REG_CIGCTRL_INVPOLPCLK;
+
+		if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
+			cfg |= FLITE_REG_CIGCTRL_INVPOLVSYNC;
+
+		if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
+			cfg |= FLITE_REG_CIGCTRL_INVPOLHREF;
+	} else {
+		cfg |= FLITE_REG_CIGCTRL_SELCAM_MIPI;
+	}
+
+	writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+
+	flite_hw_set_camera_port(dev, si->mux_id);
+}
+
+static void flite_hw_set_pack12(struct fimc_lite *dev, int on)
+{
+	u32 cfg = readl(dev->regs + FLITE_REG_CIODMAFMT);
+
+	cfg &= ~FLITE_REG_CIODMAFMT_PACK12;
+
+	if (on)
+		cfg |= FLITE_REG_CIODMAFMT_PACK12;
+
+	writel(cfg, dev->regs + FLITE_REG_CIODMAFMT);
+}
+
+static void flite_hw_set_out_order(struct fimc_lite *dev, struct flite_frame *f)
+{
+	static const u32 pixcode[4][2] = {
+		{ MEDIA_BUS_FMT_YUYV8_2X8, FLITE_REG_CIODMAFMT_YCBYCR },
+		{ MEDIA_BUS_FMT_YVYU8_2X8, FLITE_REG_CIODMAFMT_YCRYCB },
+		{ MEDIA_BUS_FMT_UYVY8_2X8, FLITE_REG_CIODMAFMT_CBYCRY },
+		{ MEDIA_BUS_FMT_VYUY8_2X8, FLITE_REG_CIODMAFMT_CRYCBY },
+	};
+	u32 cfg = readl(dev->regs + FLITE_REG_CIODMAFMT);
+	int i = ARRAY_SIZE(pixcode);
+
+	while (--i)
+		if (pixcode[i][0] == f->fmt->mbus_code)
+			break;
+	cfg &= ~FLITE_REG_CIODMAFMT_YCBCR_ORDER_MASK;
+	writel(cfg | pixcode[i][1], dev->regs + FLITE_REG_CIODMAFMT);
+}
+
+void flite_hw_set_dma_window(struct fimc_lite *dev, struct flite_frame *f)
+{
+	u32 cfg;
+
+	/* Maximum output pixel size */
+	cfg = readl(dev->regs + FLITE_REG_CIOCAN);
+	cfg &= ~FLITE_REG_CIOCAN_MASK;
+	cfg |= (f->f_height << 16) | f->f_width;
+	writel(cfg, dev->regs + FLITE_REG_CIOCAN);
+
+	/* DMA offsets */
+	cfg = readl(dev->regs + FLITE_REG_CIOOFF);
+	cfg &= ~FLITE_REG_CIOOFF_MASK;
+	cfg |= (f->rect.top << 16) | f->rect.left;
+	writel(cfg, dev->regs + FLITE_REG_CIOOFF);
+}
+
+void flite_hw_set_dma_buffer(struct fimc_lite *dev, struct flite_buffer *buf)
+{
+	unsigned int index;
+	u32 cfg;
+
+	if (dev->dd->max_dma_bufs == 1)
+		index = 0;
+	else
+		index = buf->index;
+
+	if (index == 0)
+		writel(buf->addr, dev->regs + FLITE_REG_CIOSA);
+	else
+		writel(buf->addr, dev->regs + FLITE_REG_CIOSAN(index - 1));
+
+	cfg = readl(dev->regs + FLITE_REG_CIFCNTSEQ);
+	cfg |= BIT(index);
+	writel(cfg, dev->regs + FLITE_REG_CIFCNTSEQ);
+}
+
+void flite_hw_mask_dma_buffer(struct fimc_lite *dev, u32 index)
+{
+	u32 cfg;
+
+	if (dev->dd->max_dma_bufs == 1)
+		index = 0;
+
+	cfg = readl(dev->regs + FLITE_REG_CIFCNTSEQ);
+	cfg &= ~BIT(index);
+	writel(cfg, dev->regs + FLITE_REG_CIFCNTSEQ);
+}
+
+/* Enable/disable output DMA, set output pixel size and offsets (composition) */
+void flite_hw_set_output_dma(struct fimc_lite *dev, struct flite_frame *f,
+			     bool enable)
+{
+	u32 cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
+
+	if (!enable) {
+		cfg |= FLITE_REG_CIGCTRL_ODMA_DISABLE;
+		writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+		return;
+	}
+
+	cfg &= ~FLITE_REG_CIGCTRL_ODMA_DISABLE;
+	writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
+
+	flite_hw_set_out_order(dev, f);
+	flite_hw_set_dma_window(dev, f);
+	flite_hw_set_pack12(dev, 0);
+}
+
+void flite_hw_dump_regs(struct fimc_lite *dev, const char *label)
+{
+	struct {
+		u32 offset;
+		const char * const name;
+	} registers[] = {
+		{ 0x00, "CISRCSIZE" },
+		{ 0x04, "CIGCTRL" },
+		{ 0x08, "CIIMGCPT" },
+		{ 0x0c, "CICPTSEQ" },
+		{ 0x10, "CIWDOFST" },
+		{ 0x14, "CIWDOFST2" },
+		{ 0x18, "CIODMAFMT" },
+		{ 0x20, "CIOCAN" },
+		{ 0x24, "CIOOFF" },
+		{ 0x30, "CIOSA" },
+		{ 0x40, "CISTATUS" },
+		{ 0x44, "CISTATUS2" },
+		{ 0xf0, "CITHOLD" },
+		{ 0xfc, "CIGENERAL" },
+	};
+	u32 i;
+
+	v4l2_info(&dev->subdev, "--- %s ---\n", label);
+
+	for (i = 0; i < ARRAY_SIZE(registers); i++) {
+		u32 cfg = readl(dev->regs + registers[i].offset);
+		v4l2_info(&dev->subdev, "%9s: 0x%08x\n",
+			  registers[i].name, cfg);
+	}
+}