Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 349 insertions, 0 deletions

diff --git a/drivers/media/usb/dvb-usb/Kconfig b/drivers/media/usb/dvb-usb/Kconfig
new file mode 100644
index 000000000..f10fe27e2
--- /dev/null
+++ b/drivers/media/usb/dvb-usb/Kconfig
@@ -0,0 +1,349 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config DVB_USB
+	tristate "Support for various USB DVB devices"
+	depends on DVB_CORE && USB && I2C && RC_CORE
+	select CYPRESS_FIRMWARE
+	help
+	  By enabling this you will be able to choose the various supported
+	  USB1.1 and USB2.0 DVB devices.
+
+	  Almost every USB device needs a firmware, please look into
+	  <file:Documentation/driver-api/media/drivers/dvb-usb.rst>.
+
+	  For a complete list of supported USB devices see the LinuxTV DVB Wiki:
+	  <https://linuxtv.org/wiki/index.php/DVB_USB>
+
+	  Say Y if you own a USB DVB device.
+
+config DVB_USB_DEBUG
+	bool "Enable extended debug support for all DVB-USB devices"
+	depends on DVB_USB
+	help
+	  Say Y if you want to enable debugging. See modinfo dvb-usb (and the
+	  appropriate drivers) for debug levels.
+
+if DVB_USB
+
+config DVB_USB_A800
+	tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)"
+	depends on DVB_USB
+	select DVB_USB_DIB3000MC
+	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver.
+
+config DVB_USB_AF9005
+	tristate "Afatech AF9005 DVB-T USB1.1 support"
+	depends on DVB_USB
+	select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver
+	  and the TerraTec Cinergy T USB XE (Rev.1)
+
+config DVB_USB_AF9005_REMOTE
+	tristate "Afatech AF9005 default remote control support"
+	depends on DVB_USB_AF9005
+	help
+	  Say Y here to support the default remote control decoding for the
+	  Afatech AF9005 based receiver.
+
+config DVB_USB_AZ6027
+	tristate "Azurewave DVB-S/S2 USB2.0 AZ6027 support"
+	depends on DVB_USB
+	select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y here to support the AZ6027 device
+
+config DVB_USB_CINERGY_T2
+	tristate "Terratec CinergyT2/qanu USB 2.0 DVB-T receiver"
+	depends on DVB_USB
+	help
+	  Support for "TerraTec CinergyT2" USB2.0 Highspeed DVB Receivers
+
+	  Say Y if you own such a device and want to use it.
+
+config DVB_USB_CXUSB
+	tristate "Conexant USB2.0 hybrid reference design support"
+	depends on DVB_USB
+	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_CX22702 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_DIB7000P if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TUNER_DIB0070 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_ATBM8830 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LGS8GXX if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MAX2165 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y here to support the Conexant USB2.0 hybrid reference design.
+	  DVB and ATSC modes are supported, for a basic analog mode support
+	  see the next option ("Analog support for the Conexant USB2.0 hybrid
+	  reference design").
+	  Devices that require this module:
+
+	  Medion MD95700 hybrid USB2.0 device.
+	  DViCO FusionHDTV (Bluebird) USB2.0 devices
+
+config DVB_USB_CXUSB_ANALOG
+	bool "Analog support for the Conexant USB2.0 hybrid reference design"
+	depends on DVB_USB_CXUSB && VIDEO_DEV
+	depends on VIDEO_DEV=y || VIDEO_DEV=DVB_USB_CXUSB
+	select VIDEO_CX25840
+	select VIDEOBUF2_VMALLOC
+	help
+	  Say Y here to enable basic analog mode support for the Conexant
+	  USB2.0 hybrid reference design.
+	  Currently this mode is supported only on a Medion MD95700 device.
+
+config DVB_USB_DIB0700
+	tristate "DiBcom DiB0700 USB DVB devices (see help for supported devices)"
+	depends on DVB_USB
+	select DVB_DIB7000P if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_DIB7000M if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_DIB8000 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_USB_DIB3000MC if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LGDT3305 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_MN88472 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TUNER_DIB0070 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TUNER_DIB0090 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MT2266 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_XC4000 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA18250 if MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The
+	  USB bridge is also present in devices having the DiB7700 DVB-T-USB
+	  silicon. This chip can be found in devices offered by Hauppauge,
+	  Avermedia and other big and small companies.
+
+	  For an up-to-date list of devices supported by this driver, have a look
+	  on the LinuxTV Wiki at www.linuxtv.org.
+
+	  Say Y if you own such a device and want to use it. You should build it as
+	  a module.
+
+config DVB_USB_DIB3000MC
+	tristate
+	depends on DVB_USB
+	select DVB_DIB3000MC
+	help
+	  This is a module with helper functions for accessing the
+	  DIB3000MC from USB DVB devices. It must be a separate module
+	  in case DVB_USB is built-in and DVB_DIB3000MC is a module,
+	  and gets selected automatically when needed.
+
+config DVB_USB_DIBUSB_MB
+	tristate "DiBcom USB DVB-T devices (based on the DiB3000M-B) (see help for device list)"
+	depends on DVB_USB
+	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_DIB3000MB
+	depends on DVB_DIB3000MC || !DVB_DIB3000MC
+	select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by
+	  DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator.
+
+	  For an up-to-date list of devices supported by this driver, have a look
+	  on the Linux-DVB Wiki at www.linuxtv.org.
+
+	  Say Y if you own such a device and want to use it. You should build it as
+	  a module.
+
+config DVB_USB_DIBUSB_MB_FAULTY
+	bool "Support faulty USB IDs"
+	depends on DVB_USB_DIBUSB_MB
+	help
+	  Support for faulty USB IDs due to an invalid EEPROM on some Artec devices.
+
+config DVB_USB_DIBUSB_MC
+	tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)"
+	depends on DVB_USB
+	select DVB_USB_DIB3000MC
+	select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Support for USB2.0 DVB-T receivers based on reference designs made by
+	  DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator.
+
+	  For an up-to-date list of devices supported by this driver, have a look
+	  on the Linux-DVB Wiki at www.linuxtv.org.
+
+	  Say Y if you own such a device and want to use it. You should build it as
+	  a module.
+
+config DVB_USB_DIGITV
+	tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support"
+	depends on DVB_USB
+	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_NXT6000 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y here to support the Nebula Electronics uDigitV USB2.0 DVB-T receiver.
+
+config DVB_USB_DTT200U
+	tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)"
+	depends on DVB_USB
+	help
+	  Say Y here to support the WideView/Yakumo/Hama/Typhoon/Yuan DVB-T USB2.0 receiver.
+
+	  The receivers are also known as DTT200U (Yakumo) and UB300 (Yuan).
+
+	  The WT-220U and its clones are pen-sized.
+
+config DVB_USB_DTV5100
+	tristate "AME DTV-5100 USB2.0 DVB-T support"
+	depends on DVB_USB
+	select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver.
+
+config DVB_USB_DW2102
+	tristate "DvbWorld & TeVii DVB-S/S2 USB2.0 support"
+	depends on DVB_USB
+	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB6000 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_SI21XX if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_MT312 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_ZL10039 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_DS3000 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TS2020 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV6110 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_M88RS2000 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_M88DS3103 if MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y here to support the DvbWorld, TeVii, Prof, TechnoTrend
+	  DVB-S/S2 USB2.0 receivers.
+
+config DVB_USB_GP8PSK
+	tristate "GENPIX 8PSK->USB module support"
+	depends on DVB_USB
+	help
+	  Say Y here to support the
+	    GENPIX 8psk module
+
+	  DVB-S USB2.0 receivers.
+
+config DVB_USB_M920X
+	tristate "Uli m920x DVB-T USB2.0 support"
+	depends on DVB_USB
+	select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA827X if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver.
+	  Currently, only devices with a product id of
+	  "DTV USB MINI" (in cold state) are supported.
+	  Firmware required.
+
+config DVB_USB_NOVA_T_USB2
+	tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support"
+	depends on DVB_USB
+	select DVB_USB_DIB3000MC
+	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver.
+
+config DVB_USB_OPERA1
+	tristate "Opera1 DVB-S USB2.0 receiver"
+	depends on DVB_USB
+	select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y here to support the Opera DVB-S USB2.0 receiver.
+
+config DVB_USB_PCTV452E
+	tristate "Pinnacle PCTV HDTV Pro USB device/TT Connect S2-3600"
+	depends on DVB_USB
+	select TTPCI_EEPROM
+	select DVB_ISL6423 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LNBP22 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Support for external USB adapter designed by Pinnacle,
+	  shipped under the brand name 'PCTV HDTV Pro USB'.
+	  Also supports TT Connect S2-3600/3650 cards.
+	  Say Y if you own such a device and want to use it.
+
+config DVB_USB_TECHNISAT_USB2
+	tristate "Technisat DVB-S/S2 USB2.0 support"
+	depends on DVB_USB
+	select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV6110x if MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y here to support the Technisat USB2 DVB-S/S2 device
+
+config DVB_USB_TTUSB2
+	tristate "Pinnacle 400e DVB-S USB2.0 support"
+	depends on DVB_USB
+	select DVB_TDA10086 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA826X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA827X if MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver and
+	  the TechnoTrend CT-3650 CI DVB-C/T USB2.0 receiver. The
+	  firmware protocol used by this module is similar to the one used by the
+	  old ttusb-driver - that's why the module is called dvb-usb-ttusb2.
+
+config DVB_USB_UMT_010
+	tristate "HanfTek UMT-010 DVB-T USB2.0 support"
+	depends on DVB_USB
+	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_USB_DIB3000MC
+	select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
+
+config DVB_USB_VP702X
+	tristate "TwinhanDTV StarBox and clones DVB-S USB2.0 support"
+	depends on DVB_USB
+	help
+	  Say Y here to support the
+
+	    TwinhanDTV StarBox,
+		DigitalRise USB Starbox and
+		TYPHOON DVB-S USB 2.0 BOX
+
+	  DVB-S USB2.0 receivers.
+
+config DVB_USB_VP7045
+	tristate "TwinhanDTV Alpha/MagicBoxII, DNTV tinyUSB2, Beetle USB2.0 support"
+	depends on DVB_USB
+	help
+	  Say Y here to support the
+
+	    TwinhanDTV Alpha (stick) (VP-7045),
+		TwinhanDTV MagicBox II (VP-7046),
+		DigitalNow TinyUSB 2 DVB-t,
+		DigitalRise USB 2.0 Ter (Beetle) and
+		TYPHOON DVB-T USB DRIVE
+
+	  DVB-T USB2.0 receivers.
+
+endif