Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 849 insertions, 0 deletions

diff --git a/drivers/media/usb/dvb-usb/ttusb2.c b/drivers/media/usb/dvb-usb/ttusb2.c
new file mode 100644
index 000000000..373ffa7f6
--- /dev/null
+++ b/drivers/media/usb/dvb-usb/ttusb2.c
@@ -0,0 +1,849 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* DVB USB compliant linux driver for Technotrend DVB USB boxes and clones
+ * (e.g. Pinnacle 400e DVB-S USB2.0).
+ *
+ * The Pinnacle 400e uses the same protocol as the Technotrend USB1.1 boxes.
+ *
+ * TDA8263 + TDA10086
+ *
+ * I2C addresses:
+ * 0x08 - LNBP21PD   - LNB power supply
+ * 0x0e - TDA10086   - Demodulator
+ * 0x50 - FX2 eeprom
+ * 0x60 - TDA8263    - Tuner
+ * 0x78 ???
+ *
+ * Copyright (c) 2002 Holger Waechtler <holger@convergence.de>
+ * Copyright (c) 2003 Felix Domke <tmbinc@elitedvb.net>
+ * Copyright (C) 2005-6 Patrick Boettcher <pb@linuxtv.org>
+ *
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
+ */
+#define DVB_USB_LOG_PREFIX "ttusb2"
+#include "dvb-usb.h"
+
+#include "ttusb2.h"
+
+#include "tda826x.h"
+#include "tda10086.h"
+#include "tda1002x.h"
+#include "tda10048.h"
+#include "tda827x.h"
+#include "lnbp21.h"
+/* CA */
+#include <media/dvb_ca_en50221.h>
+
+/* debug */
+static int dvb_usb_ttusb2_debug;
+#define deb_info(args...)   dprintk(dvb_usb_ttusb2_debug,0x01,args)
+module_param_named(debug,dvb_usb_ttusb2_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))." DVB_USB_DEBUG_STATUS);
+static int dvb_usb_ttusb2_debug_ci;
+module_param_named(debug_ci,dvb_usb_ttusb2_debug_ci, int, 0644);
+MODULE_PARM_DESC(debug_ci, "set debugging ci." DVB_USB_DEBUG_STATUS);
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+#define ci_dbg(format, arg...)                \
+do {                                          \
+	if (dvb_usb_ttusb2_debug_ci)                                    \
+		printk(KERN_DEBUG DVB_USB_LOG_PREFIX \
+			": %s " format "\n" , __func__, ## arg);       \
+} while (0)
+
+enum {
+	TT3650_CMD_CI_TEST = 0x40,
+	TT3650_CMD_CI_RD_CTRL,
+	TT3650_CMD_CI_WR_CTRL,
+	TT3650_CMD_CI_RD_ATTR,
+	TT3650_CMD_CI_WR_ATTR,
+	TT3650_CMD_CI_RESET,
+	TT3650_CMD_CI_SET_VIDEO_PORT
+};
+
+struct ttusb2_state {
+	struct dvb_ca_en50221 ca;
+	struct mutex ca_mutex;
+	u8 id;
+	u16 last_rc_key;
+};
+
+static int ttusb2_msg(struct dvb_usb_device *d, u8 cmd,
+		u8 *wbuf, int wlen, u8 *rbuf, int rlen)
+{
+	struct ttusb2_state *st = d->priv;
+	u8 *s, *r = NULL;
+	int ret = 0;
+
+	if (4 + rlen > 64)
+		return -EIO;
+
+	s = kzalloc(wlen+4, GFP_KERNEL);
+	if (!s)
+		return -ENOMEM;
+
+	r = kzalloc(64, GFP_KERNEL);
+	if (!r) {
+		kfree(s);
+		return -ENOMEM;
+	}
+
+	s[0] = 0xaa;
+	s[1] = ++st->id;
+	s[2] = cmd;
+	s[3] = wlen;
+	memcpy(&s[4],wbuf,wlen);
+
+	ret = dvb_usb_generic_rw(d, s, wlen+4, r, 64, 0);
+
+	if (ret  != 0 ||
+		r[0] != 0x55 ||
+		r[1] != s[1] ||
+		r[2] != cmd ||
+		(rlen > 0 && r[3] != rlen)) {
+		warn("there might have been an error during control message transfer. (rlen = %d, was %d)",rlen,r[3]);
+		kfree(s);
+		kfree(r);
+		return -EIO;
+	}
+
+	if (rlen > 0)
+		memcpy(rbuf, &r[4], rlen);
+
+	kfree(s);
+	kfree(r);
+
+	return 0;
+}
+
+/* ci */
+static int tt3650_ci_msg(struct dvb_usb_device *d, u8 cmd, u8 *data, unsigned int write_len, unsigned int read_len)
+{
+	int ret;
+	u8 rx[60];/* (64 -4) */
+	ret = ttusb2_msg(d, cmd, data, write_len, rx, read_len);
+	if (!ret)
+		memcpy(data, rx, read_len);
+	return ret;
+}
+
+static int tt3650_ci_msg_locked(struct dvb_ca_en50221 *ca, u8 cmd, u8 *data, unsigned int write_len, unsigned int read_len)
+{
+	struct dvb_usb_device *d = ca->data;
+	struct ttusb2_state *state = d->priv;
+	int ret;
+
+	mutex_lock(&state->ca_mutex);
+	ret = tt3650_ci_msg(d, cmd, data, write_len, read_len);
+	mutex_unlock(&state->ca_mutex);
+
+	return ret;
+}
+
+static int tt3650_ci_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address)
+{
+	u8 buf[3];
+	int ret = 0;
+
+	if (slot)
+		return -EINVAL;
+
+	buf[0] = (address >> 8) & 0x0F;
+	buf[1] = address;
+
+
+	ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_RD_ATTR, buf, 2, 3);
+
+	ci_dbg("%04x -> %d 0x%02x", address, ret, buf[2]);
+
+	if (ret < 0)
+		return ret;
+
+	return buf[2];
+}
+
+static int tt3650_ci_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value)
+{
+	u8 buf[3];
+
+	ci_dbg("%d 0x%04x 0x%02x", slot, address, value);
+
+	if (slot)
+		return -EINVAL;
+
+	buf[0] = (address >> 8) & 0x0F;
+	buf[1] = address;
+	buf[2] = value;
+
+	return tt3650_ci_msg_locked(ca, TT3650_CMD_CI_WR_ATTR, buf, 3, 3);
+}
+
+static int tt3650_ci_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address)
+{
+	u8 buf[2];
+	int ret;
+
+	if (slot)
+		return -EINVAL;
+
+	buf[0] = address & 3;
+
+	ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_RD_CTRL, buf, 1, 2);
+
+	ci_dbg("0x%02x -> %d 0x%02x", address, ret, buf[1]);
+
+	if (ret < 0)
+		return ret;
+
+	return buf[1];
+}
+
+static int tt3650_ci_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value)
+{
+	u8 buf[2];
+
+	ci_dbg("%d 0x%02x 0x%02x", slot, address, value);
+
+	if (slot)
+		return -EINVAL;
+
+	buf[0] = address;
+	buf[1] = value;
+
+	return tt3650_ci_msg_locked(ca, TT3650_CMD_CI_WR_CTRL, buf, 2, 2);
+}
+
+static int tt3650_ci_set_video_port(struct dvb_ca_en50221 *ca, int slot, int enable)
+{
+	u8 buf[1];
+	int ret;
+
+	ci_dbg("%d %d", slot, enable);
+
+	if (slot)
+		return -EINVAL;
+
+	buf[0] = enable;
+
+	ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_SET_VIDEO_PORT, buf, 1, 1);
+	if (ret < 0)
+		return ret;
+
+	if (enable != buf[0]) {
+		err("CI not %sabled.", enable ? "en" : "dis");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int tt3650_ci_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
+{
+	return tt3650_ci_set_video_port(ca, slot, 0);
+}
+
+static int tt3650_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
+{
+	return tt3650_ci_set_video_port(ca, slot, 1);
+}
+
+static int tt3650_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot)
+{
+	struct dvb_usb_device *d = ca->data;
+	struct ttusb2_state *state = d->priv;
+	u8 buf[1];
+	int ret;
+
+	ci_dbg("%d", slot);
+
+	if (slot)
+		return -EINVAL;
+
+	buf[0] = 0;
+
+	mutex_lock(&state->ca_mutex);
+
+	ret = tt3650_ci_msg(d, TT3650_CMD_CI_RESET, buf, 1, 1);
+	if (ret)
+		goto failed;
+
+	msleep(500);
+
+	buf[0] = 1;
+
+	ret = tt3650_ci_msg(d, TT3650_CMD_CI_RESET, buf, 1, 1);
+	if (ret)
+		goto failed;
+
+	msleep(500);
+
+	buf[0] = 0; /* FTA */
+
+	ret = tt3650_ci_msg(d, TT3650_CMD_CI_SET_VIDEO_PORT, buf, 1, 1);
+
+	msleep(1100);
+
+ failed:
+	mutex_unlock(&state->ca_mutex);
+
+	return ret;
+}
+
+static int tt3650_ci_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
+{
+	u8 buf[1];
+	int ret;
+
+	if (slot)
+		return -EINVAL;
+
+	ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_TEST, buf, 0, 1);
+	if (ret)
+		return ret;
+
+	if (1 == buf[0]) {
+		return DVB_CA_EN50221_POLL_CAM_PRESENT |
+			DVB_CA_EN50221_POLL_CAM_READY;
+	}
+	return 0;
+}
+
+static void tt3650_ci_uninit(struct dvb_usb_device *d)
+{
+	struct ttusb2_state *state;
+
+	ci_dbg("");
+
+	if (NULL == d)
+		return;
+
+	state = d->priv;
+	if (NULL == state)
+		return;
+
+	if (NULL == state->ca.data)
+		return;
+
+	dvb_ca_en50221_release(&state->ca);
+
+	memset(&state->ca, 0, sizeof(state->ca));
+}
+
+static int tt3650_ci_init(struct dvb_usb_adapter *a)
+{
+	struct dvb_usb_device *d = a->dev;
+	struct ttusb2_state *state = d->priv;
+	int ret;
+
+	ci_dbg("");
+
+	mutex_init(&state->ca_mutex);
+
+	state->ca.owner = THIS_MODULE;
+	state->ca.read_attribute_mem = tt3650_ci_read_attribute_mem;
+	state->ca.write_attribute_mem = tt3650_ci_write_attribute_mem;
+	state->ca.read_cam_control = tt3650_ci_read_cam_control;
+	state->ca.write_cam_control = tt3650_ci_write_cam_control;
+	state->ca.slot_reset = tt3650_ci_slot_reset;
+	state->ca.slot_shutdown = tt3650_ci_slot_shutdown;
+	state->ca.slot_ts_enable = tt3650_ci_slot_ts_enable;
+	state->ca.poll_slot_status = tt3650_ci_poll_slot_status;
+	state->ca.data = d;
+
+	ret = dvb_ca_en50221_init(&a->dvb_adap,
+				  &state->ca,
+				  /* flags */ 0,
+				  /* n_slots */ 1);
+	if (ret) {
+		err("Cannot initialize CI: Error %d.", ret);
+		memset(&state->ca, 0, sizeof(state->ca));
+		return ret;
+	}
+
+	info("CI initialized.");
+
+	return 0;
+}
+
+static int ttusb2_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
+{
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	static u8 obuf[60], ibuf[60];
+	int i, write_read, read;
+
+	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+		return -EAGAIN;
+
+	if (num > 2)
+		warn("more than 2 i2c messages at a time is not handled yet. TODO.");
+
+	for (i = 0; i < num; i++) {
+		write_read = i+1 < num && (msg[i+1].flags & I2C_M_RD);
+		read = msg[i].flags & I2C_M_RD;
+
+		if (3 + msg[i].len > sizeof(obuf)) {
+			err("i2c wr len=%d too high", msg[i].len);
+			break;
+		}
+		if (write_read) {
+			if (3 + msg[i+1].len > sizeof(ibuf)) {
+				err("i2c rd len=%d too high", msg[i+1].len);
+				break;
+			}
+		} else if (read) {
+			if (3 + msg[i].len > sizeof(ibuf)) {
+				err("i2c rd len=%d too high", msg[i].len);
+				break;
+			}
+		}
+
+		obuf[0] = (msg[i].addr << 1) | (write_read | read);
+		if (read)
+			obuf[1] = 0;
+		else
+			obuf[1] = msg[i].len;
+
+		/* read request */
+		if (write_read)
+			obuf[2] = msg[i+1].len;
+		else if (read)
+			obuf[2] = msg[i].len;
+		else
+			obuf[2] = 0;
+
+		memcpy(&obuf[3], msg[i].buf, msg[i].len);
+
+		if (ttusb2_msg(d, CMD_I2C_XFER, obuf, obuf[1]+3, ibuf, obuf[2] + 3) < 0) {
+			err("i2c transfer failed.");
+			break;
+		}
+
+		if (write_read) {
+			memcpy(msg[i+1].buf, &ibuf[3], msg[i+1].len);
+			i++;
+		} else if (read)
+			memcpy(msg[i].buf, &ibuf[3], msg[i].len);
+	}
+
+	mutex_unlock(&d->i2c_mutex);
+	return i;
+}
+
+static u32 ttusb2_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm ttusb2_i2c_algo = {
+	.master_xfer   = ttusb2_i2c_xfer,
+	.functionality = ttusb2_i2c_func,
+};
+
+/* command to poll IR receiver (copied from pctv452e.c) */
+#define CMD_GET_IR_CODE     0x1b
+
+/* IR */
+static int tt3650_rc_query(struct dvb_usb_device *d)
+{
+	int ret;
+	u8 rx[9]; /* A CMD_GET_IR_CODE reply is 9 bytes long */
+	struct ttusb2_state *st = d->priv;
+	ret = ttusb2_msg(d, CMD_GET_IR_CODE, NULL, 0, rx, sizeof(rx));
+	if (ret != 0)
+		return ret;
+
+	if (rx[8] & 0x01) {
+		/* got a "press" event */
+		st->last_rc_key = RC_SCANCODE_RC5(rx[3], rx[2]);
+		deb_info("%s: cmd=0x%02x sys=0x%02x\n", __func__, rx[2], rx[3]);
+		rc_keydown(d->rc_dev, RC_PROTO_RC5, st->last_rc_key, rx[1]);
+	} else if (st->last_rc_key) {
+		rc_keyup(d->rc_dev);
+		st->last_rc_key = 0;
+	}
+
+	return 0;
+}
+
+
+/* Callbacks for DVB USB */
+static int ttusb2_identify_state(struct usb_device *udev,
+				 const struct dvb_usb_device_properties *props,
+				 const struct dvb_usb_device_description **desc,
+				 int *cold)
+{
+	*cold = udev->descriptor.iManufacturer == 0 && udev->descriptor.iProduct == 0;
+	return 0;
+}
+
+static int ttusb2_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+	u8 b = onoff;
+	ttusb2_msg(d, CMD_POWER, &b, 0, NULL, 0);
+	return ttusb2_msg(d, CMD_POWER, &b, 1, NULL, 0);
+}
+
+
+static struct tda10086_config tda10086_config = {
+	.demod_address = 0x0e,
+	.invert = 0,
+	.diseqc_tone = 1,
+	.xtal_freq = TDA10086_XTAL_16M,
+};
+
+static struct tda10023_config tda10023_config = {
+	.demod_address = 0x0c,
+	.invert = 0,
+	.xtal = 16000000,
+	.pll_m = 11,
+	.pll_p = 3,
+	.pll_n = 1,
+	.deltaf = 0xa511,
+};
+
+static struct tda10048_config tda10048_config = {
+	.demod_address    = 0x10 >> 1,
+	.output_mode      = TDA10048_PARALLEL_OUTPUT,
+	.inversion        = TDA10048_INVERSION_ON,
+	.dtv6_if_freq_khz = TDA10048_IF_4000,
+	.dtv7_if_freq_khz = TDA10048_IF_4500,
+	.dtv8_if_freq_khz = TDA10048_IF_5000,
+	.clk_freq_khz     = TDA10048_CLK_16000,
+	.no_firmware      = 1,
+	.set_pll          = true ,
+	.pll_m            = 5,
+	.pll_n            = 3,
+	.pll_p            = 0,
+};
+
+static struct tda827x_config tda827x_config = {
+	.config = 0,
+};
+
+static int ttusb2_frontend_tda10086_attach(struct dvb_usb_adapter *adap)
+{
+	if (usb_set_interface(adap->dev->udev,0,3) < 0)
+		err("set interface to alts=3 failed");
+
+	if ((adap->fe_adap[0].fe = dvb_attach(tda10086_attach, &tda10086_config, &adap->dev->i2c_adap)) == NULL) {
+		deb_info("TDA10086 attach failed\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int ttusb2_ct3650_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+
+	return adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, enable);
+}
+
+static int ttusb2_frontend_tda10023_attach(struct dvb_usb_adapter *adap)
+{
+	if (usb_set_interface(adap->dev->udev, 0, 3) < 0)
+		err("set interface to alts=3 failed");
+
+	if (adap->fe_adap[0].fe == NULL) {
+		/* FE 0 DVB-C */
+		adap->fe_adap[0].fe = dvb_attach(tda10023_attach,
+			&tda10023_config, &adap->dev->i2c_adap, 0x48);
+
+		if (adap->fe_adap[0].fe == NULL) {
+			deb_info("TDA10023 attach failed\n");
+			return -ENODEV;
+		}
+		tt3650_ci_init(adap);
+	} else {
+		adap->fe_adap[1].fe = dvb_attach(tda10048_attach,
+			&tda10048_config, &adap->dev->i2c_adap);
+
+		if (adap->fe_adap[1].fe == NULL) {
+			deb_info("TDA10048 attach failed\n");
+			return -ENODEV;
+		}
+
+		/* tuner is behind TDA10023 I2C-gate */
+		adap->fe_adap[1].fe->ops.i2c_gate_ctrl = ttusb2_ct3650_i2c_gate_ctrl;
+
+	}
+
+	return 0;
+}
+
+static int ttusb2_tuner_tda827x_attach(struct dvb_usb_adapter *adap)
+{
+	struct dvb_frontend *fe;
+
+	/* MFE: select correct FE to attach tuner since that's called twice */
+	if (adap->fe_adap[1].fe == NULL)
+		fe = adap->fe_adap[0].fe;
+	else
+		fe = adap->fe_adap[1].fe;
+
+	/* attach tuner */
+	if (dvb_attach(tda827x_attach, fe, 0x61, &adap->dev->i2c_adap, &tda827x_config) == NULL) {
+		printk(KERN_ERR "%s: No tda827x found!\n", __func__);
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static int ttusb2_tuner_tda826x_attach(struct dvb_usb_adapter *adap)
+{
+	if (dvb_attach(tda826x_attach, adap->fe_adap[0].fe, 0x60, &adap->dev->i2c_adap, 0) == NULL) {
+		deb_info("TDA8263 attach failed\n");
+		return -ENODEV;
+	}
+
+	if (dvb_attach(lnbp21_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap, 0, 0) == NULL) {
+		deb_info("LNBP21 attach failed\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties ttusb2_properties;
+static struct dvb_usb_device_properties ttusb2_properties_s2400;
+static struct dvb_usb_device_properties ttusb2_properties_ct3650;
+
+static void ttusb2_usb_disconnect(struct usb_interface *intf)
+{
+	struct dvb_usb_device *d = usb_get_intfdata(intf);
+
+	tt3650_ci_uninit(d);
+	dvb_usb_device_exit(intf);
+}
+
+static int ttusb2_probe(struct usb_interface *intf,
+		const struct usb_device_id *id)
+{
+	if (0 == dvb_usb_device_init(intf, &ttusb2_properties,
+				     THIS_MODULE, NULL, adapter_nr) ||
+	    0 == dvb_usb_device_init(intf, &ttusb2_properties_s2400,
+				     THIS_MODULE, NULL, adapter_nr) ||
+	    0 == dvb_usb_device_init(intf, &ttusb2_properties_ct3650,
+				     THIS_MODULE, NULL, adapter_nr))
+		return 0;
+	return -ENODEV;
+}
+
+enum {
+	PINNACLE_PCTV_400E,
+	PINNACLE_PCTV_450E,
+	TECHNOTREND_CONNECT_S2400,
+	TECHNOTREND_CONNECT_CT3650,
+	TECHNOTREND_CONNECT_S2400_8KEEPROM,
+};
+
+static struct usb_device_id ttusb2_table[] = {
+	DVB_USB_DEV(PINNACLE, PINNACLE_PCTV_400E),
+	DVB_USB_DEV(PINNACLE, PINNACLE_PCTV_450E),
+	DVB_USB_DEV(TECHNOTREND, TECHNOTREND_CONNECT_S2400),
+	DVB_USB_DEV(TECHNOTREND, TECHNOTREND_CONNECT_CT3650),
+	DVB_USB_DEV(TECHNOTREND, TECHNOTREND_CONNECT_S2400_8KEEPROM),
+	{ }
+};
+
+MODULE_DEVICE_TABLE (usb, ttusb2_table);
+
+static struct dvb_usb_device_properties ttusb2_properties = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+	.usb_ctrl = CYPRESS_FX2,
+	.firmware = "dvb-usb-pctv-400e-01.fw",
+
+	.size_of_priv = sizeof(struct ttusb2_state),
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+		.num_frontends = 1,
+		.fe = {{
+			.streaming_ctrl   = NULL, // ttusb2_streaming_ctrl,
+
+			.frontend_attach  = ttusb2_frontend_tda10086_attach,
+			.tuner_attach     = ttusb2_tuner_tda826x_attach,
+
+			/* parameter for the MPEG2-data transfer */
+			.stream = {
+				.type = USB_ISOC,
+				.count = 5,
+				.endpoint = 0x02,
+				.u = {
+					.isoc = {
+						.framesperurb = 4,
+						.framesize = 940,
+						.interval = 1,
+					}
+				}
+			}
+		}},
+		}
+	},
+
+	.power_ctrl       = ttusb2_power_ctrl,
+	.identify_state   = ttusb2_identify_state,
+
+	.i2c_algo         = &ttusb2_i2c_algo,
+
+	.generic_bulk_ctrl_endpoint = 0x01,
+
+	.num_device_descs = 2,
+	.devices = {
+		{   "Pinnacle 400e DVB-S USB2.0",
+			{ &ttusb2_table[PINNACLE_PCTV_400E], NULL },
+			{ NULL },
+		},
+		{   "Pinnacle 450e DVB-S USB2.0",
+			{ &ttusb2_table[PINNACLE_PCTV_450E], NULL },
+			{ NULL },
+		},
+	}
+};
+
+static struct dvb_usb_device_properties ttusb2_properties_s2400 = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+	.usb_ctrl = CYPRESS_FX2,
+	.firmware = "dvb-usb-tt-s2400-01.fw",
+
+	.size_of_priv = sizeof(struct ttusb2_state),
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+		.num_frontends = 1,
+		.fe = {{
+			.streaming_ctrl   = NULL,
+
+			.frontend_attach  = ttusb2_frontend_tda10086_attach,
+			.tuner_attach     = ttusb2_tuner_tda826x_attach,
+
+			/* parameter for the MPEG2-data transfer */
+			.stream = {
+				.type = USB_ISOC,
+				.count = 5,
+				.endpoint = 0x02,
+				.u = {
+					.isoc = {
+						.framesperurb = 4,
+						.framesize = 940,
+						.interval = 1,
+					}
+				}
+			}
+		}},
+		}
+	},
+
+	.power_ctrl       = ttusb2_power_ctrl,
+	.identify_state   = ttusb2_identify_state,
+
+	.i2c_algo         = &ttusb2_i2c_algo,
+
+	.generic_bulk_ctrl_endpoint = 0x01,
+
+	.num_device_descs = 2,
+	.devices = {
+		{   "Technotrend TT-connect S-2400",
+			{ &ttusb2_table[TECHNOTREND_CONNECT_S2400], NULL },
+			{ NULL },
+		},
+		{   "Technotrend TT-connect S-2400 (8kB EEPROM)",
+			{ &ttusb2_table[TECHNOTREND_CONNECT_S2400_8KEEPROM], NULL },
+			{ NULL },
+		},
+	}
+};
+
+static struct dvb_usb_device_properties ttusb2_properties_ct3650 = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+	.usb_ctrl = CYPRESS_FX2,
+
+	.size_of_priv = sizeof(struct ttusb2_state),
+
+	.rc.core = {
+		.rc_interval      = 150, /* Less than IR_KEYPRESS_TIMEOUT */
+		.rc_codes         = RC_MAP_TT_1500,
+		.rc_query         = tt3650_rc_query,
+		.allowed_protos   = RC_PROTO_BIT_RC5,
+	},
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+		.num_frontends = 2,
+		.fe = {{
+			.streaming_ctrl   = NULL,
+
+			.frontend_attach  = ttusb2_frontend_tda10023_attach,
+			.tuner_attach = ttusb2_tuner_tda827x_attach,
+
+			/* parameter for the MPEG2-data transfer */
+			.stream = {
+				.type = USB_ISOC,
+				.count = 5,
+				.endpoint = 0x02,
+				.u = {
+					.isoc = {
+						.framesperurb = 4,
+						.framesize = 940,
+						.interval = 1,
+					}
+				}
+			}
+		}, {
+			.streaming_ctrl   = NULL,
+
+			.frontend_attach  = ttusb2_frontend_tda10023_attach,
+			.tuner_attach = ttusb2_tuner_tda827x_attach,
+
+			/* parameter for the MPEG2-data transfer */
+			.stream = {
+				.type = USB_ISOC,
+				.count = 5,
+				.endpoint = 0x02,
+				.u = {
+					.isoc = {
+						.framesperurb = 4,
+						.framesize = 940,
+						.interval = 1,
+					}
+				}
+			}
+		}},
+		},
+	},
+
+	.power_ctrl       = ttusb2_power_ctrl,
+	.identify_state   = ttusb2_identify_state,
+
+	.i2c_algo         = &ttusb2_i2c_algo,
+
+	.generic_bulk_ctrl_endpoint = 0x01,
+
+	.num_device_descs = 1,
+	.devices = {
+		{   "Technotrend TT-connect CT-3650",
+			.warm_ids = { &ttusb2_table[TECHNOTREND_CONNECT_CT3650], NULL },
+		},
+	}
+};
+
+static struct usb_driver ttusb2_driver = {
+	.name		= "dvb_usb_ttusb2",
+	.probe		= ttusb2_probe,
+	.disconnect	= ttusb2_usb_disconnect,
+	.id_table	= ttusb2_table,
+};
+
+module_usb_driver(ttusb2_driver);
+
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
+MODULE_DESCRIPTION("Driver for Pinnacle PCTV 400e DVB-S USB2.0");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL");