Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 210 insertions, 0 deletions

diff --git a/drivers/media/usb/go7007/go7007-i2c.c b/drivers/media/usb/go7007/go7007-i2c.c
new file mode 100644
index 000000000..38339dd2f
--- /dev/null
+++ b/drivers/media/usb/go7007/go7007-i2c.c
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2005-2006 Micronas USA Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/list.h>
+#include <linux/unistd.h>
+#include <linux/time.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+
+#include "go7007-priv.h"
+
+/********************* Driver for on-board I2C adapter *********************/
+
+/* #define GO7007_I2C_DEBUG */
+
+#define SPI_I2C_ADDR_BASE		0x1400
+#define STATUS_REG_ADDR			(SPI_I2C_ADDR_BASE + 0x2)
+#define I2C_CTRL_REG_ADDR		(SPI_I2C_ADDR_BASE + 0x6)
+#define I2C_DEV_UP_ADDR_REG_ADDR	(SPI_I2C_ADDR_BASE + 0x7)
+#define I2C_LO_ADDR_REG_ADDR		(SPI_I2C_ADDR_BASE + 0x8)
+#define I2C_DATA_REG_ADDR		(SPI_I2C_ADDR_BASE + 0x9)
+#define I2C_CLKFREQ_REG_ADDR		(SPI_I2C_ADDR_BASE + 0xa)
+
+#define I2C_STATE_MASK			0x0007
+#define I2C_READ_READY_MASK		0x0008
+
+/* There is only one I2C port on the TW2804 that feeds all four GO7007 VIPs
+ * on the Adlink PCI-MPG24, so access is shared between all of them. */
+static DEFINE_MUTEX(adlink_mpg24_i2c_lock);
+
+static int go7007_i2c_xfer(struct go7007 *go, u16 addr, int read,
+		u16 command, int flags, u8 *data)
+{
+	int i, ret = -EIO;
+	u16 val;
+
+	if (go->status == STATUS_SHUTDOWN)
+		return -ENODEV;
+
+#ifdef GO7007_I2C_DEBUG
+	if (read)
+		dev_dbg(go->dev, "go7007-i2c: reading 0x%02x on 0x%02x\n",
+			command, addr);
+	else
+		dev_dbg(go->dev,
+			"go7007-i2c: writing 0x%02x to 0x%02x on 0x%02x\n",
+			*data, command, addr);
+#endif
+
+	mutex_lock(&go->hw_lock);
+
+	if (go->board_id == GO7007_BOARDID_ADLINK_MPG24) {
+		/* Bridge the I2C port on this GO7007 to the shared bus */
+		mutex_lock(&adlink_mpg24_i2c_lock);
+		go7007_write_addr(go, 0x3c82, 0x0020);
+	}
+
+	/* Wait for I2C adapter to be ready */
+	for (i = 0; i < 10; ++i) {
+		if (go7007_read_addr(go, STATUS_REG_ADDR, &val) < 0)
+			goto i2c_done;
+		if (!(val & I2C_STATE_MASK))
+			break;
+		msleep(100);
+	}
+	if (i == 10) {
+		dev_err(go->dev, "go7007-i2c: I2C adapter is hung\n");
+		goto i2c_done;
+	}
+
+	/* Set target register (command) */
+	go7007_write_addr(go, I2C_CTRL_REG_ADDR, flags);
+	go7007_write_addr(go, I2C_LO_ADDR_REG_ADDR, command);
+
+	/* If we're writing, send the data and target address and we're done */
+	if (!read) {
+		go7007_write_addr(go, I2C_DATA_REG_ADDR, *data);
+		go7007_write_addr(go, I2C_DEV_UP_ADDR_REG_ADDR,
+					(addr << 9) | (command >> 8));
+		ret = 0;
+		goto i2c_done;
+	}
+
+	/* Otherwise, we're reading.  First clear i2c_rx_data_rdy. */
+	if (go7007_read_addr(go, I2C_DATA_REG_ADDR, &val) < 0)
+		goto i2c_done;
+
+	/* Send the target address plus read flag */
+	go7007_write_addr(go, I2C_DEV_UP_ADDR_REG_ADDR,
+			(addr << 9) | 0x0100 | (command >> 8));
+
+	/* Wait for i2c_rx_data_rdy */
+	for (i = 0; i < 10; ++i) {
+		if (go7007_read_addr(go, STATUS_REG_ADDR, &val) < 0)
+			goto i2c_done;
+		if (val & I2C_READ_READY_MASK)
+			break;
+		msleep(100);
+	}
+	if (i == 10) {
+		dev_err(go->dev, "go7007-i2c: I2C adapter is hung\n");
+		goto i2c_done;
+	}
+
+	/* Retrieve the read byte */
+	if (go7007_read_addr(go, I2C_DATA_REG_ADDR, &val) < 0)
+		goto i2c_done;
+	*data = val;
+	ret = 0;
+
+i2c_done:
+	if (go->board_id == GO7007_BOARDID_ADLINK_MPG24) {
+		/* Isolate the I2C port on this GO7007 from the shared bus */
+		go7007_write_addr(go, 0x3c82, 0x0000);
+		mutex_unlock(&adlink_mpg24_i2c_lock);
+	}
+	mutex_unlock(&go->hw_lock);
+	return ret;
+}
+
+static int go7007_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+		unsigned short flags, char read_write,
+		u8 command, int size, union i2c_smbus_data *data)
+{
+	struct go7007 *go = i2c_get_adapdata(adapter);
+
+	if (size != I2C_SMBUS_BYTE_DATA)
+		return -EIO;
+	return go7007_i2c_xfer(go, addr, read_write == I2C_SMBUS_READ, command,
+			flags & I2C_CLIENT_SCCB ? 0x10 : 0x00, &data->byte);
+}
+
+/* VERY LIMITED I2C master xfer function -- only needed because the
+ * SMBus functions only support 8-bit commands and the SAA7135 uses
+ * 16-bit commands.  The I2C interface on the GO7007, as limited as
+ * it is, does support this mode. */
+
+static int go7007_i2c_master_xfer(struct i2c_adapter *adapter,
+					struct i2c_msg msgs[], int num)
+{
+	struct go7007 *go = i2c_get_adapdata(adapter);
+	int i;
+
+	for (i = 0; i < num; ++i) {
+		/* We can only do two things here -- write three bytes, or
+		 * write two bytes and read one byte. */
+		if (msgs[i].len == 2) {
+			if (i + 1 == num || msgs[i].addr != msgs[i + 1].addr ||
+					(msgs[i].flags & I2C_M_RD) ||
+					!(msgs[i + 1].flags & I2C_M_RD) ||
+					msgs[i + 1].len != 1)
+				return -EIO;
+			if (go7007_i2c_xfer(go, msgs[i].addr, 1,
+					(msgs[i].buf[0] << 8) | msgs[i].buf[1],
+					0x01, &msgs[i + 1].buf[0]) < 0)
+				return -EIO;
+			++i;
+		} else if (msgs[i].len == 3) {
+			if (msgs[i].flags & I2C_M_RD)
+				return -EIO;
+			if (msgs[i].len != 3)
+				return -EIO;
+			if (go7007_i2c_xfer(go, msgs[i].addr, 0,
+					(msgs[i].buf[0] << 8) | msgs[i].buf[1],
+					0x01, &msgs[i].buf[2]) < 0)
+				return -EIO;
+		} else
+			return -EIO;
+	}
+
+	return num;
+}
+
+static u32 go7007_functionality(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_BYTE_DATA;
+}
+
+static const struct i2c_algorithm go7007_algo = {
+	.smbus_xfer	= go7007_smbus_xfer,
+	.master_xfer	= go7007_i2c_master_xfer,
+	.functionality	= go7007_functionality,
+};
+
+static struct i2c_adapter go7007_adap_templ = {
+	.owner			= THIS_MODULE,
+	.name			= "WIS GO7007SB",
+	.algo			= &go7007_algo,
+};
+
+int go7007_i2c_init(struct go7007 *go)
+{
+	memcpy(&go->i2c_adapter, &go7007_adap_templ,
+			sizeof(go7007_adap_templ));
+	go->i2c_adapter.dev.parent = go->dev;
+	i2c_set_adapdata(&go->i2c_adapter, go);
+	if (i2c_add_adapter(&go->i2c_adapter) < 0) {
+		dev_err(go->dev,
+			"go7007-i2c: error: i2c_add_adapter failed\n");
+		return -1;
+	}
+	return 0;
+}