Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 718 insertions, 0 deletions

diff --git a/drivers/media/usb/pvrusb2/pvrusb2-devattr.c b/drivers/media/usb/pvrusb2/pvrusb2-devattr.c
new file mode 100644
index 000000000..d1b984ec7
--- /dev/null
+++ b/drivers/media/usb/pvrusb2/pvrusb2-devattr.c
@@ -0,0 +1,718 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ *  Copyright (C) 2007 Mike Isely <isely@pobox.com>
+ */
+
+/*
+
+This source file should encompass ALL per-device type information for the
+driver.  To define a new device, add elements to the pvr2_device_table and
+pvr2_device_desc structures.
+
+*/
+
+#include "pvrusb2-devattr.h"
+#include <linux/usb.h>
+#include <linux/module.h>
+/* This is needed in order to pull in tuner type ids... */
+#include <linux/i2c.h>
+#include <media/tuner.h>
+#ifdef CONFIG_VIDEO_PVRUSB2_DVB
+#include "pvrusb2-hdw-internal.h"
+#include "lgdt330x.h"
+#include "s5h1409.h"
+#include "s5h1411.h"
+#include "tda10048.h"
+#include "tda18271.h"
+#include "tda8290.h"
+#include "tuner-simple.h"
+#include "si2157.h"
+#include "lgdt3306a.h"
+#include "si2168.h"
+#endif
+
+
+/*------------------------------------------------------------------------*/
+/* Hauppauge PVR-USB2 Model 29xxx */
+
+static const struct pvr2_device_client_desc pvr2_cli_29xxx[] = {
+	{ .module_id = PVR2_CLIENT_ID_SAA7115 },
+	{ .module_id = PVR2_CLIENT_ID_MSP3400 },
+	{ .module_id = PVR2_CLIENT_ID_TUNER },
+	{ .module_id = PVR2_CLIENT_ID_DEMOD },
+};
+
+#define PVR2_FIRMWARE_29xxx "v4l-pvrusb2-29xxx-01.fw"
+static const char *pvr2_fw1_names_29xxx[] = {
+		PVR2_FIRMWARE_29xxx,
+};
+
+static const struct pvr2_device_desc pvr2_device_29xxx = {
+		.description = "WinTV PVR USB2 Model 29xxx",
+		.shortname = "29xxx",
+		.client_table.lst = pvr2_cli_29xxx,
+		.client_table.cnt = ARRAY_SIZE(pvr2_cli_29xxx),
+		.fx2_firmware.lst = pvr2_fw1_names_29xxx,
+		.fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_29xxx),
+		.flag_has_hauppauge_rom = !0,
+		.flag_has_analogtuner = !0,
+		.flag_has_fmradio = !0,
+		.flag_has_composite = !0,
+		.flag_has_svideo = !0,
+		.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
+		.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
+		.ir_scheme = PVR2_IR_SCHEME_29XXX,
+};
+
+
+
+/*------------------------------------------------------------------------*/
+/* Hauppauge PVR-USB2 Model 24xxx */
+
+static const struct pvr2_device_client_desc pvr2_cli_24xxx[] = {
+	{ .module_id = PVR2_CLIENT_ID_CX25840 },
+	{ .module_id = PVR2_CLIENT_ID_TUNER },
+	{ .module_id = PVR2_CLIENT_ID_WM8775 },
+	{ .module_id = PVR2_CLIENT_ID_DEMOD },
+};
+
+#define PVR2_FIRMWARE_24xxx "v4l-pvrusb2-24xxx-01.fw"
+static const char *pvr2_fw1_names_24xxx[] = {
+		PVR2_FIRMWARE_24xxx,
+};
+
+static const struct pvr2_device_desc pvr2_device_24xxx = {
+		.description = "WinTV PVR USB2 Model 24xxx",
+		.shortname = "24xxx",
+		.client_table.lst = pvr2_cli_24xxx,
+		.client_table.cnt = ARRAY_SIZE(pvr2_cli_24xxx),
+		.fx2_firmware.lst = pvr2_fw1_names_24xxx,
+		.fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_24xxx),
+		.flag_has_cx25840 = !0,
+		.flag_has_wm8775 = !0,
+		.flag_has_hauppauge_rom = !0,
+		.flag_has_analogtuner = !0,
+		.flag_has_fmradio = !0,
+		.flag_has_composite = !0,
+		.flag_has_svideo = !0,
+		.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
+		.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
+		.ir_scheme = PVR2_IR_SCHEME_24XXX,
+};
+
+
+
+/*------------------------------------------------------------------------*/
+/* GOTVIEW USB2.0 DVD2 */
+
+static const struct pvr2_device_client_desc pvr2_cli_gotview_2[] = {
+	{ .module_id = PVR2_CLIENT_ID_CX25840 },
+	{ .module_id = PVR2_CLIENT_ID_TUNER },
+	{ .module_id = PVR2_CLIENT_ID_DEMOD },
+};
+
+static const struct pvr2_device_desc pvr2_device_gotview_2 = {
+		.description = "Gotview USB 2.0 DVD 2",
+		.shortname = "gv2",
+		.client_table.lst = pvr2_cli_gotview_2,
+		.client_table.cnt = ARRAY_SIZE(pvr2_cli_gotview_2),
+		.flag_has_cx25840 = !0,
+		.default_tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
+		.flag_has_analogtuner = !0,
+		.flag_has_fmradio = !0,
+		.flag_has_composite = !0,
+		.flag_has_svideo = !0,
+		.signal_routing_scheme = PVR2_ROUTING_SCHEME_GOTVIEW,
+};
+
+
+
+/*------------------------------------------------------------------------*/
+/* GOTVIEW USB2.0 DVD Deluxe */
+
+/* (same module list as gotview_2) */
+
+static const struct pvr2_device_desc pvr2_device_gotview_2d = {
+		.description = "Gotview USB 2.0 DVD Deluxe",
+		.shortname = "gv2d",
+		.client_table.lst = pvr2_cli_gotview_2,
+		.client_table.cnt = ARRAY_SIZE(pvr2_cli_gotview_2),
+		.flag_has_cx25840 = !0,
+		.default_tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
+		.flag_has_analogtuner = !0,
+		.flag_has_composite = !0,
+		.flag_has_svideo = !0,
+		.signal_routing_scheme = PVR2_ROUTING_SCHEME_GOTVIEW,
+};
+
+
+
+/*------------------------------------------------------------------------*/
+/* Terratec Grabster AV400 */
+
+static const struct pvr2_device_client_desc pvr2_cli_av400[] = {
+	{ .module_id = PVR2_CLIENT_ID_CX25840 },
+};
+
+static const struct pvr2_device_desc pvr2_device_av400 = {
+		.description = "Terratec Grabster AV400",
+		.shortname = "av400",
+		.flag_is_experimental = 1,
+		.client_table.lst = pvr2_cli_av400,
+		.client_table.cnt = ARRAY_SIZE(pvr2_cli_av400),
+		.flag_has_cx25840 = !0,
+		.flag_has_analogtuner = 0,
+		.flag_has_composite = !0,
+		.flag_has_svideo = !0,
+		.signal_routing_scheme = PVR2_ROUTING_SCHEME_AV400,
+};
+
+
+
+/*------------------------------------------------------------------------*/
+/* OnAir Creator */
+
+#ifdef CONFIG_VIDEO_PVRUSB2_DVB
+static struct lgdt330x_config pvr2_lgdt3303_config = {
+	.demod_chip          = LGDT3303,
+	.clock_polarity_flip = 1,
+};
+
+static int pvr2_lgdt3303_attach(struct pvr2_dvb_adapter *adap)
+{
+	adap->fe[0] = dvb_attach(lgdt330x_attach, &pvr2_lgdt3303_config,
+				 0x0e,
+				 &adap->channel.hdw->i2c_adap);
+	if (adap->fe[0])
+		return 0;
+
+	return -EIO;
+}
+
+static int pvr2_lgh06xf_attach(struct pvr2_dvb_adapter *adap)
+{
+	dvb_attach(simple_tuner_attach, adap->fe[0],
+		   &adap->channel.hdw->i2c_adap, 0x61,
+		   TUNER_LG_TDVS_H06XF);
+
+	return 0;
+}
+
+static const struct pvr2_dvb_props pvr2_onair_creator_fe_props = {
+	.frontend_attach = pvr2_lgdt3303_attach,
+	.tuner_attach    = pvr2_lgh06xf_attach,
+};
+#endif
+
+static const struct pvr2_device_client_desc pvr2_cli_onair_creator[] = {
+	{ .module_id = PVR2_CLIENT_ID_SAA7115 },
+	{ .module_id = PVR2_CLIENT_ID_CS53L32A },
+	{ .module_id = PVR2_CLIENT_ID_TUNER },
+};
+
+static const struct pvr2_device_desc pvr2_device_onair_creator = {
+		.description = "OnAir Creator Hybrid USB tuner",
+		.shortname = "oac",
+		.client_table.lst = pvr2_cli_onair_creator,
+		.client_table.cnt = ARRAY_SIZE(pvr2_cli_onair_creator),
+		.default_tuner_type = TUNER_LG_TDVS_H06XF,
+		.flag_has_analogtuner = !0,
+		.flag_has_composite = !0,
+		.flag_has_svideo = !0,
+		.flag_digital_requires_cx23416 = !0,
+		.signal_routing_scheme = PVR2_ROUTING_SCHEME_ONAIR,
+		.digital_control_scheme = PVR2_DIGITAL_SCHEME_ONAIR,
+		.default_std_mask = V4L2_STD_NTSC_M,
+#ifdef CONFIG_VIDEO_PVRUSB2_DVB
+		.dvb_props = &pvr2_onair_creator_fe_props,
+#endif
+};
+
+
+
+/*------------------------------------------------------------------------*/
+/* OnAir USB 2.0 */
+
+#ifdef CONFIG_VIDEO_PVRUSB2_DVB
+static struct lgdt330x_config pvr2_lgdt3302_config = {
+	.demod_chip          = LGDT3302,
+};
+
+static int pvr2_lgdt3302_attach(struct pvr2_dvb_adapter *adap)
+{
+	adap->fe[0] = dvb_attach(lgdt330x_attach, &pvr2_lgdt3302_config,
+				 0x0e,
+				 &adap->channel.hdw->i2c_adap);
+	if (adap->fe[0])
+		return 0;
+
+	return -EIO;
+}
+
+static int pvr2_fcv1236d_attach(struct pvr2_dvb_adapter *adap)
+{
+	dvb_attach(simple_tuner_attach, adap->fe[0],
+		   &adap->channel.hdw->i2c_adap, 0x61,
+		   TUNER_PHILIPS_FCV1236D);
+
+	return 0;
+}
+
+static const struct pvr2_dvb_props pvr2_onair_usb2_fe_props = {
+	.frontend_attach = pvr2_lgdt3302_attach,
+	.tuner_attach    = pvr2_fcv1236d_attach,
+};
+#endif
+
+static const struct pvr2_device_client_desc pvr2_cli_onair_usb2[] = {
+	{ .module_id = PVR2_CLIENT_ID_SAA7115 },
+	{ .module_id = PVR2_CLIENT_ID_CS53L32A },
+	{ .module_id = PVR2_CLIENT_ID_TUNER },
+};
+
+static const struct pvr2_device_desc pvr2_device_onair_usb2 = {
+		.description = "OnAir USB2 Hybrid USB tuner",
+		.shortname = "oa2",
+		.client_table.lst = pvr2_cli_onair_usb2,
+		.client_table.cnt = ARRAY_SIZE(pvr2_cli_onair_usb2),
+		.default_tuner_type = TUNER_PHILIPS_FCV1236D,
+		.flag_has_analogtuner = !0,
+		.flag_has_composite = !0,
+		.flag_has_svideo = !0,
+		.flag_digital_requires_cx23416 = !0,
+		.signal_routing_scheme = PVR2_ROUTING_SCHEME_ONAIR,
+		.digital_control_scheme = PVR2_DIGITAL_SCHEME_ONAIR,
+		.default_std_mask = V4L2_STD_NTSC_M,
+#ifdef CONFIG_VIDEO_PVRUSB2_DVB
+		.dvb_props = &pvr2_onair_usb2_fe_props,
+#endif
+};
+
+
+
+/*------------------------------------------------------------------------*/
+/* Hauppauge PVR-USB2 Model 73xxx */
+
+#ifdef CONFIG_VIDEO_PVRUSB2_DVB
+static struct tda10048_config hauppauge_tda10048_config = {
+	.demod_address  = 0x10 >> 1,
+	.output_mode    = TDA10048_PARALLEL_OUTPUT,
+	.fwbulkwritelen = TDA10048_BULKWRITE_50,
+	.inversion      = TDA10048_INVERSION_ON,
+	.dtv6_if_freq_khz = TDA10048_IF_3300,
+	.dtv7_if_freq_khz = TDA10048_IF_3800,
+	.dtv8_if_freq_khz = TDA10048_IF_4300,
+	.clk_freq_khz   = TDA10048_CLK_16000,
+	.disable_gate_access = 1,
+};
+
+static struct tda829x_config tda829x_no_probe = {
+	.probe_tuner = TDA829X_DONT_PROBE,
+};
+
+static struct tda18271_std_map hauppauge_tda18271_dvbt_std_map = {
+	.dvbt_6   = { .if_freq = 3300, .agc_mode = 3, .std = 4,
+		      .if_lvl = 1, .rfagc_top = 0x37, },
+	.dvbt_7   = { .if_freq = 3800, .agc_mode = 3, .std = 5,
+		      .if_lvl = 1, .rfagc_top = 0x37, },
+	.dvbt_8   = { .if_freq = 4300, .agc_mode = 3, .std = 6,
+		      .if_lvl = 1, .rfagc_top = 0x37, },
+};
+
+static struct tda18271_config hauppauge_tda18271_dvb_config = {
+	.std_map = &hauppauge_tda18271_dvbt_std_map,
+	.gate    = TDA18271_GATE_ANALOG,
+	.output_opt = TDA18271_OUTPUT_LT_OFF,
+};
+
+static int pvr2_tda10048_attach(struct pvr2_dvb_adapter *adap)
+{
+	adap->fe[0] = dvb_attach(tda10048_attach, &hauppauge_tda10048_config,
+				 &adap->channel.hdw->i2c_adap);
+	if (adap->fe[0])
+		return 0;
+
+	return -EIO;
+}
+
+static int pvr2_73xxx_tda18271_8295_attach(struct pvr2_dvb_adapter *adap)
+{
+	dvb_attach(tda829x_attach, adap->fe[0],
+		   &adap->channel.hdw->i2c_adap, 0x42,
+		   &tda829x_no_probe);
+	dvb_attach(tda18271_attach, adap->fe[0], 0x60,
+		   &adap->channel.hdw->i2c_adap,
+		   &hauppauge_tda18271_dvb_config);
+
+	return 0;
+}
+
+static const struct pvr2_dvb_props pvr2_73xxx_dvb_props = {
+	.frontend_attach = pvr2_tda10048_attach,
+	.tuner_attach    = pvr2_73xxx_tda18271_8295_attach,
+};
+#endif
+
+static const struct pvr2_device_client_desc pvr2_cli_73xxx[] = {
+	{ .module_id = PVR2_CLIENT_ID_CX25840 },
+	{ .module_id = PVR2_CLIENT_ID_TUNER,
+	  .i2c_address_list = "\x42"},
+};
+
+#define PVR2_FIRMWARE_73xxx "v4l-pvrusb2-73xxx-01.fw"
+static const char *pvr2_fw1_names_73xxx[] = {
+		PVR2_FIRMWARE_73xxx,
+};
+
+static const struct pvr2_device_desc pvr2_device_73xxx = {
+		.description = "WinTV HVR-1900 Model 73xxx",
+		.shortname = "73xxx",
+		.client_table.lst = pvr2_cli_73xxx,
+		.client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx),
+		.fx2_firmware.lst = pvr2_fw1_names_73xxx,
+		.fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_73xxx),
+		.flag_has_cx25840 = !0,
+		.flag_has_hauppauge_rom = !0,
+		.flag_has_analogtuner = !0,
+		.flag_has_composite = !0,
+		.flag_has_svideo = !0,
+		.flag_fx2_16kb = !0,
+		.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
+		.digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
+		.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
+		.ir_scheme = PVR2_IR_SCHEME_ZILOG,
+#ifdef CONFIG_VIDEO_PVRUSB2_DVB
+		.dvb_props = &pvr2_73xxx_dvb_props,
+#endif
+};
+
+
+
+/*------------------------------------------------------------------------*/
+/* Hauppauge PVR-USB2 Model 75xxx */
+
+#ifdef CONFIG_VIDEO_PVRUSB2_DVB
+static struct s5h1409_config pvr2_s5h1409_config = {
+	.demod_address = 0x32 >> 1,
+	.output_mode   = S5H1409_PARALLEL_OUTPUT,
+	.gpio          = S5H1409_GPIO_OFF,
+	.qam_if        = 4000,
+	.inversion     = S5H1409_INVERSION_ON,
+	.status_mode   = S5H1409_DEMODLOCKING,
+};
+
+static struct s5h1411_config pvr2_s5h1411_config = {
+	.output_mode   = S5H1411_PARALLEL_OUTPUT,
+	.gpio          = S5H1411_GPIO_OFF,
+	.vsb_if        = S5H1411_IF_44000,
+	.qam_if        = S5H1411_IF_4000,
+	.inversion     = S5H1411_INVERSION_ON,
+	.status_mode   = S5H1411_DEMODLOCKING,
+};
+
+static struct tda18271_std_map hauppauge_tda18271_std_map = {
+	.atsc_6   = { .if_freq = 5380, .agc_mode = 3, .std = 3,
+		      .if_lvl = 6, .rfagc_top = 0x37, },
+	.qam_6    = { .if_freq = 4000, .agc_mode = 3, .std = 0,
+		      .if_lvl = 6, .rfagc_top = 0x37, },
+};
+
+static struct tda18271_config hauppauge_tda18271_config = {
+	.std_map = &hauppauge_tda18271_std_map,
+	.gate    = TDA18271_GATE_ANALOG,
+	.output_opt = TDA18271_OUTPUT_LT_OFF,
+};
+
+static int pvr2_s5h1409_attach(struct pvr2_dvb_adapter *adap)
+{
+	adap->fe[0] = dvb_attach(s5h1409_attach, &pvr2_s5h1409_config,
+				 &adap->channel.hdw->i2c_adap);
+	if (adap->fe[0])
+		return 0;
+
+	return -EIO;
+}
+
+static int pvr2_s5h1411_attach(struct pvr2_dvb_adapter *adap)
+{
+	adap->fe[0] = dvb_attach(s5h1411_attach, &pvr2_s5h1411_config,
+				 &adap->channel.hdw->i2c_adap);
+	if (adap->fe[0])
+		return 0;
+
+	return -EIO;
+}
+
+static int pvr2_tda18271_8295_attach(struct pvr2_dvb_adapter *adap)
+{
+	dvb_attach(tda829x_attach, adap->fe[0],
+		   &adap->channel.hdw->i2c_adap, 0x42,
+		   &tda829x_no_probe);
+	dvb_attach(tda18271_attach, adap->fe[0], 0x60,
+		   &adap->channel.hdw->i2c_adap,
+		   &hauppauge_tda18271_config);
+
+	return 0;
+}
+
+static const struct pvr2_dvb_props pvr2_750xx_dvb_props = {
+	.frontend_attach = pvr2_s5h1409_attach,
+	.tuner_attach    = pvr2_tda18271_8295_attach,
+};
+
+static const struct pvr2_dvb_props pvr2_751xx_dvb_props = {
+	.frontend_attach = pvr2_s5h1411_attach,
+	.tuner_attach    = pvr2_tda18271_8295_attach,
+};
+#endif
+
+#define PVR2_FIRMWARE_75xxx "v4l-pvrusb2-73xxx-01.fw"
+static const char *pvr2_fw1_names_75xxx[] = {
+		PVR2_FIRMWARE_75xxx,
+};
+
+static const struct pvr2_device_desc pvr2_device_750xx = {
+		.description = "WinTV HVR-1950 Model 750xx",
+		.shortname = "750xx",
+		.client_table.lst = pvr2_cli_73xxx,
+		.client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx),
+		.fx2_firmware.lst = pvr2_fw1_names_75xxx,
+		.fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_75xxx),
+		.flag_has_cx25840 = !0,
+		.flag_has_hauppauge_rom = !0,
+		.flag_has_analogtuner = !0,
+		.flag_has_composite = !0,
+		.flag_has_svideo = !0,
+		.flag_fx2_16kb = !0,
+		.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
+		.digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
+		.default_std_mask = V4L2_STD_NTSC_M,
+		.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
+		.ir_scheme = PVR2_IR_SCHEME_ZILOG,
+#ifdef CONFIG_VIDEO_PVRUSB2_DVB
+		.dvb_props = &pvr2_750xx_dvb_props,
+#endif
+};
+
+static const struct pvr2_device_desc pvr2_device_751xx = {
+		.description = "WinTV HVR-1950 Model 751xx",
+		.shortname = "751xx",
+		.client_table.lst = pvr2_cli_73xxx,
+		.client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx),
+		.fx2_firmware.lst = pvr2_fw1_names_75xxx,
+		.fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_75xxx),
+		.flag_has_cx25840 = !0,
+		.flag_has_hauppauge_rom = !0,
+		.flag_has_analogtuner = !0,
+		.flag_has_composite = !0,
+		.flag_has_svideo = !0,
+		.flag_fx2_16kb = !0,
+		.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
+		.digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
+		.default_std_mask = V4L2_STD_NTSC_M,
+		.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
+		.ir_scheme = PVR2_IR_SCHEME_ZILOG,
+#ifdef CONFIG_VIDEO_PVRUSB2_DVB
+		.dvb_props = &pvr2_751xx_dvb_props,
+#endif
+};
+
+/*------------------------------------------------------------------------*/
+/*    Hauppauge PVR-USB2 Model 160000 / 160111 -- HVR-1955 / HVR-1975     */
+
+#ifdef CONFIG_VIDEO_PVRUSB2_DVB
+static int pvr2_si2157_attach(struct pvr2_dvb_adapter *adap);
+static int pvr2_si2168_attach(struct pvr2_dvb_adapter *adap);
+static int pvr2_dual_fe_attach(struct pvr2_dvb_adapter *adap);
+static int pvr2_lgdt3306a_attach(struct pvr2_dvb_adapter *adap);
+
+static const struct pvr2_dvb_props pvr2_160000_dvb_props = {
+	.frontend_attach = pvr2_dual_fe_attach,
+	.tuner_attach    = pvr2_si2157_attach,
+};
+
+static const struct pvr2_dvb_props pvr2_160111_dvb_props = {
+	.frontend_attach = pvr2_lgdt3306a_attach,
+	.tuner_attach    = pvr2_si2157_attach,
+};
+
+static int pvr2_si2157_attach(struct pvr2_dvb_adapter *adap)
+{
+	struct si2157_config si2157_config = {};
+
+	si2157_config.inversion = 1;
+	si2157_config.fe = adap->fe[0];
+
+	adap->i2c_client_tuner = dvb_module_probe("si2157", "si2177",
+						  &adap->channel.hdw->i2c_adap,
+						  0x60, &si2157_config);
+
+	if (!adap->i2c_client_tuner)
+		return -ENODEV;
+
+	return 0;
+}
+
+static int pvr2_si2168_attach(struct pvr2_dvb_adapter *adap)
+{
+	struct si2168_config si2168_config = {};
+	struct i2c_adapter *adapter;
+
+	pr_debug("%s()\n", __func__);
+
+	si2168_config.fe = &adap->fe[1];
+	si2168_config.i2c_adapter = &adapter;
+	si2168_config.ts_mode = SI2168_TS_PARALLEL; /*2, 1-serial, 2-parallel.*/
+	si2168_config.ts_clock_gapped = 1; /*0-disabled, 1-enabled.*/
+	si2168_config.ts_clock_inv = 0; /*0-not-invert, 1-invert*/
+	si2168_config.spectral_inversion = 1; /*0-not-invert, 1-invert*/
+
+	adap->i2c_client_demod[1] = dvb_module_probe("si2168", NULL,
+						     &adap->channel.hdw->i2c_adap,
+						     0x64, &si2168_config);
+
+	if (!adap->i2c_client_demod[1])
+		return -ENODEV;
+
+	return 0;
+}
+
+static int pvr2_lgdt3306a_attach(struct pvr2_dvb_adapter *adap)
+{
+	struct lgdt3306a_config lgdt3306a_config;
+	struct i2c_adapter *adapter;
+
+	pr_debug("%s()\n", __func__);
+
+	lgdt3306a_config.fe = &adap->fe[0];
+	lgdt3306a_config.i2c_adapter = &adapter;
+	lgdt3306a_config.deny_i2c_rptr = 1;
+	lgdt3306a_config.spectral_inversion = 1;
+	lgdt3306a_config.qam_if_khz = 4000;
+	lgdt3306a_config.vsb_if_khz = 3250;
+	lgdt3306a_config.mpeg_mode = LGDT3306A_MPEG_PARALLEL;
+	lgdt3306a_config.tpclk_edge = LGDT3306A_TPCLK_FALLING_EDGE;
+	lgdt3306a_config.tpvalid_polarity = LGDT3306A_TP_VALID_LOW;
+	lgdt3306a_config.xtalMHz = 25; /* demod clock MHz; 24/25 supported */
+
+	adap->i2c_client_demod[0] = dvb_module_probe("lgdt3306a", NULL,
+						     &adap->channel.hdw->i2c_adap,
+						     0x59, &lgdt3306a_config);
+
+	if (!adap->i2c_client_demod[0])
+		return -ENODEV;
+
+	return 0;
+}
+
+static int pvr2_dual_fe_attach(struct pvr2_dvb_adapter *adap)
+{
+	pr_debug("%s()\n", __func__);
+
+	if (pvr2_lgdt3306a_attach(adap) != 0)
+		return -ENODEV;
+
+	if (pvr2_si2168_attach(adap) != 0) {
+		dvb_module_release(adap->i2c_client_demod[0]);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+#endif
+
+#define PVR2_FIRMWARE_160xxx "v4l-pvrusb2-160xxx-01.fw"
+static const char *pvr2_fw1_names_160xxx[] = {
+		PVR2_FIRMWARE_160xxx,
+};
+
+static const struct pvr2_device_client_desc pvr2_cli_160xxx[] = {
+	{ .module_id = PVR2_CLIENT_ID_CX25840 },
+};
+
+static const struct pvr2_device_desc pvr2_device_160000 = {
+		.description = "WinTV HVR-1975 Model 160000",
+		.shortname = "160000",
+		.client_table.lst = pvr2_cli_160xxx,
+		.client_table.cnt = ARRAY_SIZE(pvr2_cli_160xxx),
+		.fx2_firmware.lst = pvr2_fw1_names_160xxx,
+		.fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_160xxx),
+		.default_tuner_type = TUNER_ABSENT,
+		.flag_has_cx25840 = 1,
+		.flag_has_hauppauge_rom = 1,
+		.flag_has_analogtuner = 1,
+		.flag_has_composite = 1,
+		.flag_has_svideo = 1,
+		.flag_fx2_16kb = 1,
+		.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
+		.digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
+		.default_std_mask = V4L2_STD_NTSC_M,
+		.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
+		.ir_scheme = PVR2_IR_SCHEME_ZILOG,
+#ifdef CONFIG_VIDEO_PVRUSB2_DVB
+		.dvb_props = &pvr2_160000_dvb_props,
+#endif
+};
+
+static const struct pvr2_device_desc pvr2_device_160111 = {
+		.description = "WinTV HVR-1955 Model 160111",
+		.shortname = "160111",
+		.client_table.lst = pvr2_cli_160xxx,
+		.client_table.cnt = ARRAY_SIZE(pvr2_cli_160xxx),
+		.fx2_firmware.lst = pvr2_fw1_names_160xxx,
+		.fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_160xxx),
+		.default_tuner_type = TUNER_ABSENT,
+		.flag_has_cx25840 = 1,
+		.flag_has_hauppauge_rom = 1,
+		.flag_has_analogtuner = 1,
+		.flag_has_composite = 1,
+		.flag_has_svideo = 1,
+		.flag_fx2_16kb = 1,
+		.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
+		.digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
+		.default_std_mask = V4L2_STD_NTSC_M,
+		.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
+		.ir_scheme = PVR2_IR_SCHEME_ZILOG,
+#ifdef CONFIG_VIDEO_PVRUSB2_DVB
+		.dvb_props = &pvr2_160111_dvb_props,
+#endif
+};
+
+/*------------------------------------------------------------------------*/
+
+struct usb_device_id pvr2_device_table[] = {
+	{ USB_DEVICE(0x2040, 0x2900),
+	  .driver_info = (kernel_ulong_t)&pvr2_device_29xxx},
+	{ USB_DEVICE(0x2040, 0x2950), /* Logically identical to 2900 */
+	  .driver_info = (kernel_ulong_t)&pvr2_device_29xxx},
+	{ USB_DEVICE(0x2040, 0x2400),
+	  .driver_info = (kernel_ulong_t)&pvr2_device_24xxx},
+	{ USB_DEVICE(0x1164, 0x0622),
+	  .driver_info = (kernel_ulong_t)&pvr2_device_gotview_2},
+	{ USB_DEVICE(0x1164, 0x0602),
+	  .driver_info = (kernel_ulong_t)&pvr2_device_gotview_2d},
+	{ USB_DEVICE(0x11ba, 0x1003),
+	  .driver_info = (kernel_ulong_t)&pvr2_device_onair_creator},
+	{ USB_DEVICE(0x11ba, 0x1001),
+	  .driver_info = (kernel_ulong_t)&pvr2_device_onair_usb2},
+	{ USB_DEVICE(0x2040, 0x7300),
+	  .driver_info = (kernel_ulong_t)&pvr2_device_73xxx},
+	{ USB_DEVICE(0x2040, 0x7500),
+	  .driver_info = (kernel_ulong_t)&pvr2_device_750xx},
+	{ USB_DEVICE(0x2040, 0x7501),
+	  .driver_info = (kernel_ulong_t)&pvr2_device_751xx},
+	{ USB_DEVICE(0x0ccd, 0x0039),
+	  .driver_info = (kernel_ulong_t)&pvr2_device_av400},
+	{ USB_DEVICE(0x2040, 0x7502),
+	  .driver_info = (kernel_ulong_t)&pvr2_device_160111},
+	{ USB_DEVICE(0x2040, 0x7510),
+	  .driver_info = (kernel_ulong_t)&pvr2_device_160000},
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, pvr2_device_table);
+MODULE_FIRMWARE(PVR2_FIRMWARE_29xxx);
+MODULE_FIRMWARE(PVR2_FIRMWARE_24xxx);
+MODULE_FIRMWARE(PVR2_FIRMWARE_73xxx);
+MODULE_FIRMWARE(PVR2_FIRMWARE_75xxx);