Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 300 insertions, 0 deletions

diff --git a/drivers/mfd/ocelot-spi.c b/drivers/mfd/ocelot-spi.c
new file mode 100644
index 000000000..2ecd271de
--- /dev/null
+++ b/drivers/mfd/ocelot-spi.c
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * SPI core driver for the Ocelot chip family.
+ *
+ * This driver will handle everything necessary to allow for communication over
+ * SPI to the VSC7511, VSC7512, VSC7513 and VSC7514 chips. The main functions
+ * are to prepare the chip's SPI interface for a specific bus speed, and a host
+ * processor's endianness. This will create and distribute regmaps for any
+ * children.
+ *
+ * Copyright 2021-2022 Innovative Advantage Inc.
+ *
+ * Author: Colin Foster <colin.foster@in-advantage.com>
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/ioport.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+#include <linux/types.h>
+#include <linux/units.h>
+
+#include "ocelot.h"
+
+#define REG_DEV_CPUORG_IF_CTRL		0x0000
+#define REG_DEV_CPUORG_IF_CFGSTAT	0x0004
+
+#define CFGSTAT_IF_NUM_VCORE		(0 << 24)
+#define CFGSTAT_IF_NUM_VRAP		(1 << 24)
+#define CFGSTAT_IF_NUM_SI		(2 << 24)
+#define CFGSTAT_IF_NUM_MIIM		(3 << 24)
+
+#define VSC7512_DEVCPU_ORG_RES_START	0x71000000
+#define VSC7512_DEVCPU_ORG_RES_SIZE	0x38
+
+#define VSC7512_CHIP_REGS_RES_START	0x71070000
+#define VSC7512_CHIP_REGS_RES_SIZE	0x14
+
+static const struct resource vsc7512_dev_cpuorg_resource =
+	DEFINE_RES_REG_NAMED(VSC7512_DEVCPU_ORG_RES_START,
+			     VSC7512_DEVCPU_ORG_RES_SIZE,
+			     "devcpu_org");
+
+static const struct resource vsc7512_gcb_resource =
+	DEFINE_RES_REG_NAMED(VSC7512_CHIP_REGS_RES_START,
+			     VSC7512_CHIP_REGS_RES_SIZE,
+			     "devcpu_gcb_chip_regs");
+
+static int ocelot_spi_initialize(struct device *dev)
+{
+	struct ocelot_ddata *ddata = dev_get_drvdata(dev);
+	u32 val, check;
+	int err;
+
+	val = OCELOT_SPI_BYTE_ORDER;
+
+	/*
+	 * The SPI address must be big-endian, but we want the payload to match
+	 * our CPU. These are two bits (0 and 1) but they're repeated such that
+	 * the write from any configuration will be valid. The four
+	 * configurations are:
+	 *
+	 * 0b00: little-endian, MSB first
+	 * |            111111   | 22221111 | 33222222 |
+	 * | 76543210 | 54321098 | 32109876 | 10987654 |
+	 *
+	 * 0b01: big-endian, MSB first
+	 * | 33222222 | 22221111 | 111111   |          |
+	 * | 10987654 | 32109876 | 54321098 | 76543210 |
+	 *
+	 * 0b10: little-endian, LSB first
+	 * |              111111 | 11112222 | 22222233 |
+	 * | 01234567 | 89012345 | 67890123 | 45678901 |
+	 *
+	 * 0b11: big-endian, LSB first
+	 * | 22222233 | 11112222 |   111111 |          |
+	 * | 45678901 | 67890123 | 89012345 | 01234567 |
+	 */
+	err = regmap_write(ddata->cpuorg_regmap, REG_DEV_CPUORG_IF_CTRL, val);
+	if (err)
+		return err;
+
+	/*
+	 * Apply the number of padding bytes between a read request and the data
+	 * payload. Some registers have access times of up to 1us, so if the
+	 * first payload bit is shifted out too quickly, the read will fail.
+	 */
+	val = ddata->spi_padding_bytes;
+	err = regmap_write(ddata->cpuorg_regmap, REG_DEV_CPUORG_IF_CFGSTAT, val);
+	if (err)
+		return err;
+
+	/*
+	 * After we write the interface configuration, read it back here. This
+	 * will verify several different things. The first is that the number of
+	 * padding bytes actually got written correctly. These are found in bits
+	 * 0:3.
+	 *
+	 * The second is that bit 16 is cleared. Bit 16 is IF_CFGSTAT:IF_STAT,
+	 * and will be set if the register access is too fast. This would be in
+	 * the condition that the number of padding bytes is insufficient for
+	 * the SPI bus frequency.
+	 *
+	 * The last check is for bits 31:24, which define the interface by which
+	 * the registers are being accessed. Since we're accessing them via the
+	 * serial interface, it must return IF_NUM_SI.
+	 */
+	check = val | CFGSTAT_IF_NUM_SI;
+
+	err = regmap_read(ddata->cpuorg_regmap, REG_DEV_CPUORG_IF_CFGSTAT, &val);
+	if (err)
+		return err;
+
+	if (check != val)
+		return -ENODEV;
+
+	return 0;
+}
+
+static const struct regmap_config ocelot_spi_regmap_config = {
+	.reg_bits = 24,
+	.reg_stride = 4,
+	.reg_downshift = 2,
+	.val_bits = 32,
+
+	.write_flag_mask = 0x80,
+
+	.use_single_write = true,
+	.can_multi_write = false,
+
+	.reg_format_endian = REGMAP_ENDIAN_BIG,
+	.val_format_endian = REGMAP_ENDIAN_NATIVE,
+};
+
+static int ocelot_spi_regmap_bus_read(void *context, const void *reg, size_t reg_size,
+				      void *val, size_t val_size)
+{
+	struct spi_transfer xfers[3] = {0};
+	struct device *dev = context;
+	struct ocelot_ddata *ddata;
+	struct spi_device *spi;
+	struct spi_message msg;
+	unsigned int index = 0;
+
+	ddata = dev_get_drvdata(dev);
+	spi = to_spi_device(dev);
+
+	xfers[index].tx_buf = reg;
+	xfers[index].len = reg_size;
+	index++;
+
+	if (ddata->spi_padding_bytes) {
+		xfers[index].len = ddata->spi_padding_bytes;
+		xfers[index].tx_buf = ddata->dummy_buf;
+		xfers[index].dummy_data = 1;
+		index++;
+	}
+
+	xfers[index].rx_buf = val;
+	xfers[index].len = val_size;
+	index++;
+
+	spi_message_init_with_transfers(&msg, xfers, index);
+
+	return spi_sync(spi, &msg);
+}
+
+static int ocelot_spi_regmap_bus_write(void *context, const void *data, size_t count)
+{
+	struct device *dev = context;
+	struct spi_device *spi = to_spi_device(dev);
+
+	return spi_write(spi, data, count);
+}
+
+static const struct regmap_bus ocelot_spi_regmap_bus = {
+	.write = ocelot_spi_regmap_bus_write,
+	.read = ocelot_spi_regmap_bus_read,
+};
+
+struct regmap *ocelot_spi_init_regmap(struct device *dev, const struct resource *res)
+{
+	struct regmap_config regmap_config;
+
+	memcpy(&regmap_config, &ocelot_spi_regmap_config, sizeof(regmap_config));
+
+	regmap_config.name = res->name;
+	regmap_config.max_register = resource_size(res) - 1;
+	regmap_config.reg_base = res->start;
+
+	return devm_regmap_init(dev, &ocelot_spi_regmap_bus, dev, &regmap_config);
+}
+EXPORT_SYMBOL_NS(ocelot_spi_init_regmap, MFD_OCELOT_SPI);
+
+static int ocelot_spi_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct ocelot_ddata *ddata;
+	struct regmap *r;
+	int err;
+
+	ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	spi_set_drvdata(spi, ddata);
+
+	if (spi->max_speed_hz <= 500000) {
+		ddata->spi_padding_bytes = 0;
+	} else {
+		/*
+		 * Calculation taken from the manual for IF_CFGSTAT:IF_CFG.
+		 * Register access time is 1us, so we need to configure and send
+		 * out enough padding bytes between the read request and data
+		 * transmission that lasts at least 1 microsecond.
+		 */
+		ddata->spi_padding_bytes = 1 + (spi->max_speed_hz / HZ_PER_MHZ + 2) / 8;
+
+		ddata->dummy_buf = devm_kzalloc(dev, ddata->spi_padding_bytes, GFP_KERNEL);
+		if (!ddata->dummy_buf)
+			return -ENOMEM;
+	}
+
+	spi->bits_per_word = 8;
+
+	err = spi_setup(spi);
+	if (err)
+		return dev_err_probe(&spi->dev, err, "Error performing SPI setup\n");
+
+	r = ocelot_spi_init_regmap(dev, &vsc7512_dev_cpuorg_resource);
+	if (IS_ERR(r))
+		return PTR_ERR(r);
+
+	ddata->cpuorg_regmap = r;
+
+	r = ocelot_spi_init_regmap(dev, &vsc7512_gcb_resource);
+	if (IS_ERR(r))
+		return PTR_ERR(r);
+
+	ddata->gcb_regmap = r;
+
+	/*
+	 * The chip must be set up for SPI before it gets initialized and reset.
+	 * This must be done before calling init, and after a chip reset is
+	 * performed.
+	 */
+	err = ocelot_spi_initialize(dev);
+	if (err)
+		return dev_err_probe(dev, err, "Error initializing SPI bus\n");
+
+	err = ocelot_chip_reset(dev);
+	if (err)
+		return dev_err_probe(dev, err, "Error resetting device\n");
+
+	/*
+	 * A chip reset will clear the SPI configuration, so it needs to be done
+	 * again before we can access any registers.
+	 */
+	err = ocelot_spi_initialize(dev);
+	if (err)
+		return dev_err_probe(dev, err, "Error initializing SPI bus after reset\n");
+
+	err = ocelot_core_init(dev);
+	if (err)
+		return dev_err_probe(dev, err, "Error initializing Ocelot core\n");
+
+	return 0;
+}
+
+static const struct spi_device_id ocelot_spi_ids[] = {
+	{ "vsc7512", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, ocelot_spi_ids);
+
+static const struct of_device_id ocelot_spi_of_match[] = {
+	{ .compatible = "mscc,vsc7512" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ocelot_spi_of_match);
+
+static struct spi_driver ocelot_spi_driver = {
+	.driver = {
+		.name = "ocelot-soc",
+		.of_match_table = ocelot_spi_of_match,
+	},
+	.id_table = ocelot_spi_ids,
+	.probe = ocelot_spi_probe,
+};
+module_spi_driver(ocelot_spi_driver);
+
+MODULE_DESCRIPTION("SPI Controlled Ocelot Chip Driver");
+MODULE_AUTHOR("Colin Foster <colin.foster@in-advantage.com>");
+MODULE_LICENSE("Dual MIT/GPL");
+MODULE_IMPORT_NS(MFD_OCELOT);