Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 880 insertions, 0 deletions

diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
new file mode 100644
index 000000000..f44fc3f08
--- /dev/null
+++ b/drivers/mfd/rk808.c
@@ -0,0 +1,880 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MFD core driver for Rockchip RK808/RK818
+ *
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Author: Chris Zhong <zyw@rock-chips.com>
+ * Author: Zhang Qing <zhangqing@rock-chips.com>
+ *
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ *
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ */
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/rk808.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/reboot.h>
+
+struct rk808_reg_data {
+	int addr;
+	int mask;
+	int value;
+};
+
+static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	/*
+	 * Notes:
+	 * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but
+	 *   we don't use that feature.  It's better to cache.
+	 * - It's unlikely we care that RK808_DEVCTRL_REG is volatile since
+	 *   bits are cleared in case when we shutoff anyway, but better safe.
+	 */
+
+	switch (reg) {
+	case RK808_SECONDS_REG ... RK808_WEEKS_REG:
+	case RK808_RTC_STATUS_REG:
+	case RK808_VB_MON_REG:
+	case RK808_THERMAL_REG:
+	case RK808_DCDC_UV_STS_REG:
+	case RK808_LDO_UV_STS_REG:
+	case RK808_DCDC_PG_REG:
+	case RK808_LDO_PG_REG:
+	case RK808_DEVCTRL_REG:
+	case RK808_INT_STS_REG1:
+	case RK808_INT_STS_REG2:
+		return true;
+	}
+
+	return false;
+}
+
+static bool rk817_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	/*
+	 * Notes:
+	 * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but
+	 *   we don't use that feature.  It's better to cache.
+	 */
+
+	switch (reg) {
+	case RK817_SECONDS_REG ... RK817_WEEKS_REG:
+	case RK817_RTC_STATUS_REG:
+	case RK817_CODEC_DTOP_LPT_SRST:
+	case RK817_GAS_GAUGE_ADC_CONFIG0 ... RK817_GAS_GAUGE_CUR_ADC_K0:
+	case RK817_PMIC_CHRG_STS:
+	case RK817_PMIC_CHRG_OUT:
+	case RK817_PMIC_CHRG_IN:
+	case RK817_INT_STS_REG0:
+	case RK817_INT_STS_REG1:
+	case RK817_INT_STS_REG2:
+	case RK817_SYS_STS:
+		return true;
+	}
+
+	return false;
+}
+
+static const struct regmap_config rk818_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RK818_USB_CTRL_REG,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = rk808_is_volatile_reg,
+};
+
+static const struct regmap_config rk805_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RK805_OFF_SOURCE_REG,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = rk808_is_volatile_reg,
+};
+
+static const struct regmap_config rk808_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RK808_IO_POL_REG,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = rk808_is_volatile_reg,
+};
+
+static const struct regmap_config rk817_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RK817_GPIO_INT_CFG,
+	.cache_type = REGCACHE_NONE,
+	.volatile_reg = rk817_is_volatile_reg,
+};
+
+static const struct resource rtc_resources[] = {
+	DEFINE_RES_IRQ(RK808_IRQ_RTC_ALARM),
+};
+
+static const struct resource rk817_rtc_resources[] = {
+	DEFINE_RES_IRQ(RK817_IRQ_RTC_ALARM),
+};
+
+static const struct resource rk805_key_resources[] = {
+	DEFINE_RES_IRQ(RK805_IRQ_PWRON_RISE),
+	DEFINE_RES_IRQ(RK805_IRQ_PWRON_FALL),
+};
+
+static const struct resource rk817_pwrkey_resources[] = {
+	DEFINE_RES_IRQ(RK817_IRQ_PWRON_RISE),
+	DEFINE_RES_IRQ(RK817_IRQ_PWRON_FALL),
+};
+
+static const struct resource rk817_charger_resources[] = {
+	DEFINE_RES_IRQ(RK817_IRQ_PLUG_IN),
+	DEFINE_RES_IRQ(RK817_IRQ_PLUG_OUT),
+};
+
+static const struct mfd_cell rk805s[] = {
+	{ .name = "rk808-clkout", .id = PLATFORM_DEVID_NONE, },
+	{ .name = "rk808-regulator", .id = PLATFORM_DEVID_NONE, },
+	{ .name = "rk805-pinctrl", .id = PLATFORM_DEVID_NONE, },
+	{
+		.name = "rk808-rtc",
+		.num_resources = ARRAY_SIZE(rtc_resources),
+		.resources = &rtc_resources[0],
+		.id = PLATFORM_DEVID_NONE,
+	},
+	{	.name = "rk805-pwrkey",
+		.num_resources = ARRAY_SIZE(rk805_key_resources),
+		.resources = &rk805_key_resources[0],
+		.id = PLATFORM_DEVID_NONE,
+	},
+};
+
+static const struct mfd_cell rk808s[] = {
+	{ .name = "rk808-clkout", .id = PLATFORM_DEVID_NONE, },
+	{ .name = "rk808-regulator", .id = PLATFORM_DEVID_NONE, },
+	{
+		.name = "rk808-rtc",
+		.num_resources = ARRAY_SIZE(rtc_resources),
+		.resources = rtc_resources,
+		.id = PLATFORM_DEVID_NONE,
+	},
+};
+
+static const struct mfd_cell rk817s[] = {
+	{ .name = "rk808-clkout", .id = PLATFORM_DEVID_NONE, },
+	{ .name = "rk808-regulator", .id = PLATFORM_DEVID_NONE, },
+	{
+		.name = "rk805-pwrkey",
+		.num_resources = ARRAY_SIZE(rk817_pwrkey_resources),
+		.resources = &rk817_pwrkey_resources[0],
+		.id = PLATFORM_DEVID_NONE,
+	},
+	{
+		.name = "rk808-rtc",
+		.num_resources = ARRAY_SIZE(rk817_rtc_resources),
+		.resources = &rk817_rtc_resources[0],
+		.id = PLATFORM_DEVID_NONE,
+	},
+	{ .name = "rk817-codec", .id = PLATFORM_DEVID_NONE, },
+	{
+		.name = "rk817-charger",
+		.num_resources = ARRAY_SIZE(rk817_charger_resources),
+		.resources = &rk817_charger_resources[0],
+		.id = PLATFORM_DEVID_NONE,
+	},
+};
+
+static const struct mfd_cell rk818s[] = {
+	{ .name = "rk808-regulator", .id = PLATFORM_DEVID_NONE, },
+	{
+		.name = "rk808-rtc",
+		.num_resources = ARRAY_SIZE(rtc_resources),
+		.resources = rtc_resources,
+		.id = PLATFORM_DEVID_NONE,
+	},
+};
+
+static const struct rk808_reg_data rk805_pre_init_reg[] = {
+	{RK805_BUCK1_CONFIG_REG, RK805_BUCK1_2_ILMAX_MASK,
+				 RK805_BUCK1_2_ILMAX_4000MA},
+	{RK805_BUCK2_CONFIG_REG, RK805_BUCK1_2_ILMAX_MASK,
+				 RK805_BUCK1_2_ILMAX_4000MA},
+	{RK805_BUCK3_CONFIG_REG, RK805_BUCK3_4_ILMAX_MASK,
+				 RK805_BUCK3_ILMAX_3000MA},
+	{RK805_BUCK4_CONFIG_REG, RK805_BUCK3_4_ILMAX_MASK,
+				 RK805_BUCK4_ILMAX_3500MA},
+	{RK805_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_400MA},
+	{RK805_THERMAL_REG, TEMP_HOTDIE_MSK, TEMP115C},
+};
+
+static const struct rk808_reg_data rk808_pre_init_reg[] = {
+	{ RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK,  BUCK_ILMIN_150MA },
+	{ RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK,  BUCK_ILMIN_200MA },
+	{ RK808_BOOST_CONFIG_REG, BOOST_ILMIN_MASK, BOOST_ILMIN_100MA },
+	{ RK808_BUCK1_CONFIG_REG, BUCK1_RATE_MASK,  BUCK_ILMIN_200MA },
+	{ RK808_BUCK2_CONFIG_REG, BUCK2_RATE_MASK,  BUCK_ILMIN_200MA },
+	{ RK808_DCDC_UV_ACT_REG,  BUCK_UV_ACT_MASK, BUCK_UV_ACT_DISABLE},
+	{ RK808_VB_MON_REG,       MASK_ALL,         VB_LO_ACT |
+						    VB_LO_SEL_3500MV },
+};
+
+static const struct rk808_reg_data rk817_pre_init_reg[] = {
+	{RK817_RTC_CTRL_REG, RTC_STOP, RTC_STOP},
+	/* Codec specific registers */
+	{ RK817_CODEC_DTOP_VUCTL, MASK_ALL, 0x03 },
+	{ RK817_CODEC_DTOP_VUCTIME, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DTOP_LPT_SRST, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DTOP_DIGEN_CLKE, MASK_ALL, 0x00 },
+	/* from vendor driver, CODEC_AREF_RTCFG0 not defined in data sheet */
+	{ RK817_CODEC_AREF_RTCFG0, MASK_ALL, 0x00 },
+	{ RK817_CODEC_AREF_RTCFG1, MASK_ALL, 0x06 },
+	{ RK817_CODEC_AADC_CFG0, MASK_ALL, 0xc8 },
+	/* from vendor driver, CODEC_AADC_CFG1 not defined in data sheet */
+	{ RK817_CODEC_AADC_CFG1, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DADC_VOLL, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DADC_VOLR, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DADC_SR_ACL0, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DADC_ALC1, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DADC_ALC2, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DADC_NG, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DADC_HPF, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DADC_RVOLL, MASK_ALL, 0xff },
+	{ RK817_CODEC_DADC_RVOLR, MASK_ALL, 0xff },
+	{ RK817_CODEC_AMIC_CFG0, MASK_ALL, 0x70 },
+	{ RK817_CODEC_AMIC_CFG1, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DMIC_PGA_GAIN, MASK_ALL, 0x66 },
+	{ RK817_CODEC_DMIC_LMT1, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DMIC_LMT2, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DMIC_NG1, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DMIC_NG2, MASK_ALL, 0x00 },
+	/* from vendor driver, CODEC_ADAC_CFG0 not defined in data sheet */
+	{ RK817_CODEC_ADAC_CFG0, MASK_ALL, 0x00 },
+	{ RK817_CODEC_ADAC_CFG1, MASK_ALL, 0x07 },
+	{ RK817_CODEC_DDAC_POPD_DACST, MASK_ALL, 0x82 },
+	{ RK817_CODEC_DDAC_VOLL, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DDAC_VOLR, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DDAC_SR_LMT0, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DDAC_LMT1, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DDAC_LMT2, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DDAC_MUTE_MIXCTL, MASK_ALL, 0xa0 },
+	{ RK817_CODEC_DDAC_RVOLL, MASK_ALL, 0xff },
+	{ RK817_CODEC_DADC_RVOLR, MASK_ALL, 0xff },
+	{ RK817_CODEC_AMIC_CFG0, MASK_ALL, 0x70 },
+	{ RK817_CODEC_AMIC_CFG1, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DMIC_PGA_GAIN, MASK_ALL, 0x66 },
+	{ RK817_CODEC_DMIC_LMT1, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DMIC_LMT2, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DMIC_NG1, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DMIC_NG2, MASK_ALL, 0x00 },
+	/* from vendor driver, CODEC_ADAC_CFG0 not defined in data sheet */
+	{ RK817_CODEC_ADAC_CFG0, MASK_ALL, 0x00 },
+	{ RK817_CODEC_ADAC_CFG1, MASK_ALL, 0x07 },
+	{ RK817_CODEC_DDAC_POPD_DACST, MASK_ALL, 0x82 },
+	{ RK817_CODEC_DDAC_VOLL, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DDAC_VOLR, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DDAC_SR_LMT0, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DDAC_LMT1, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DDAC_LMT2, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DDAC_MUTE_MIXCTL, MASK_ALL, 0xa0 },
+	{ RK817_CODEC_DDAC_RVOLL, MASK_ALL, 0xff },
+	{ RK817_CODEC_DDAC_RVOLR, MASK_ALL, 0xff },
+	{ RK817_CODEC_AHP_ANTI0, MASK_ALL, 0x00 },
+	{ RK817_CODEC_AHP_ANTI1, MASK_ALL, 0x00 },
+	{ RK817_CODEC_AHP_CFG0, MASK_ALL, 0xe0 },
+	{ RK817_CODEC_AHP_CFG1, MASK_ALL, 0x1f },
+	{ RK817_CODEC_AHP_CP, MASK_ALL, 0x09 },
+	{ RK817_CODEC_ACLASSD_CFG1, MASK_ALL, 0x69 },
+	{ RK817_CODEC_ACLASSD_CFG2, MASK_ALL, 0x44 },
+	{ RK817_CODEC_APLL_CFG0, MASK_ALL, 0x04 },
+	{ RK817_CODEC_APLL_CFG1, MASK_ALL, 0x00 },
+	{ RK817_CODEC_APLL_CFG2, MASK_ALL, 0x30 },
+	{ RK817_CODEC_APLL_CFG3, MASK_ALL, 0x19 },
+	{ RK817_CODEC_APLL_CFG4, MASK_ALL, 0x65 },
+	{ RK817_CODEC_APLL_CFG5, MASK_ALL, 0x01 },
+	{ RK817_CODEC_DI2S_CKM, MASK_ALL, 0x01 },
+	{ RK817_CODEC_DI2S_RSD, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DI2S_RXCR1, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DI2S_RXCR2, MASK_ALL, 0x17 },
+	{ RK817_CODEC_DI2S_RXCMD_TSD, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DI2S_TXCR1, MASK_ALL, 0x00 },
+	{ RK817_CODEC_DI2S_TXCR2, MASK_ALL, 0x17 },
+	{ RK817_CODEC_DI2S_TXCR3_TXCMD, MASK_ALL, 0x00 },
+	{RK817_GPIO_INT_CFG, RK817_INT_POL_MSK, RK817_INT_POL_L},
+	{RK817_SYS_CFG(1), RK817_HOTDIE_TEMP_MSK | RK817_TSD_TEMP_MSK,
+					   RK817_HOTDIE_105 | RK817_TSD_140},
+};
+
+static const struct rk808_reg_data rk818_pre_init_reg[] = {
+	/* improve efficiency */
+	{ RK818_BUCK2_CONFIG_REG, BUCK2_RATE_MASK,  BUCK_ILMIN_250MA },
+	{ RK818_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK,  BUCK_ILMIN_250MA },
+	{ RK818_BOOST_CONFIG_REG, BOOST_ILMIN_MASK, BOOST_ILMIN_100MA },
+	{ RK818_USB_CTRL_REG,	  RK818_USB_ILIM_SEL_MASK,
+						    RK818_USB_ILMIN_2000MA },
+	/* close charger when usb lower then 3.4V */
+	{ RK818_USB_CTRL_REG,	  RK818_USB_CHG_SD_VSEL_MASK,
+						    (0x7 << 4) },
+	/* no action when vref */
+	{ RK818_H5V_EN_REG,	  BIT(1),	    RK818_REF_RDY_CTRL },
+	/* enable HDMI 5V */
+	{ RK818_H5V_EN_REG,	  BIT(0),	    RK818_H5V_EN },
+	{ RK808_VB_MON_REG,	  MASK_ALL,	    VB_LO_ACT |
+						    VB_LO_SEL_3500MV },
+};
+
+static const struct regmap_irq rk805_irqs[] = {
+	[RK805_IRQ_PWRON_RISE] = {
+		.mask = RK805_IRQ_PWRON_RISE_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_VB_LOW] = {
+		.mask = RK805_IRQ_VB_LOW_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_PWRON] = {
+		.mask = RK805_IRQ_PWRON_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_PWRON_LP] = {
+		.mask = RK805_IRQ_PWRON_LP_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_HOTDIE] = {
+		.mask = RK805_IRQ_HOTDIE_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_RTC_ALARM] = {
+		.mask = RK805_IRQ_RTC_ALARM_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_RTC_PERIOD] = {
+		.mask = RK805_IRQ_RTC_PERIOD_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_PWRON_FALL] = {
+		.mask = RK805_IRQ_PWRON_FALL_MSK,
+		.reg_offset = 0,
+	},
+};
+
+static const struct regmap_irq rk808_irqs[] = {
+	/* INT_STS */
+	[RK808_IRQ_VOUT_LO] = {
+		.mask = RK808_IRQ_VOUT_LO_MSK,
+		.reg_offset = 0,
+	},
+	[RK808_IRQ_VB_LO] = {
+		.mask = RK808_IRQ_VB_LO_MSK,
+		.reg_offset = 0,
+	},
+	[RK808_IRQ_PWRON] = {
+		.mask = RK808_IRQ_PWRON_MSK,
+		.reg_offset = 0,
+	},
+	[RK808_IRQ_PWRON_LP] = {
+		.mask = RK808_IRQ_PWRON_LP_MSK,
+		.reg_offset = 0,
+	},
+	[RK808_IRQ_HOTDIE] = {
+		.mask = RK808_IRQ_HOTDIE_MSK,
+		.reg_offset = 0,
+	},
+	[RK808_IRQ_RTC_ALARM] = {
+		.mask = RK808_IRQ_RTC_ALARM_MSK,
+		.reg_offset = 0,
+	},
+	[RK808_IRQ_RTC_PERIOD] = {
+		.mask = RK808_IRQ_RTC_PERIOD_MSK,
+		.reg_offset = 0,
+	},
+
+	/* INT_STS2 */
+	[RK808_IRQ_PLUG_IN_INT] = {
+		.mask = RK808_IRQ_PLUG_IN_INT_MSK,
+		.reg_offset = 1,
+	},
+	[RK808_IRQ_PLUG_OUT_INT] = {
+		.mask = RK808_IRQ_PLUG_OUT_INT_MSK,
+		.reg_offset = 1,
+	},
+};
+
+static const struct regmap_irq rk818_irqs[] = {
+	/* INT_STS */
+	[RK818_IRQ_VOUT_LO] = {
+		.mask = RK818_IRQ_VOUT_LO_MSK,
+		.reg_offset = 0,
+	},
+	[RK818_IRQ_VB_LO] = {
+		.mask = RK818_IRQ_VB_LO_MSK,
+		.reg_offset = 0,
+	},
+	[RK818_IRQ_PWRON] = {
+		.mask = RK818_IRQ_PWRON_MSK,
+		.reg_offset = 0,
+	},
+	[RK818_IRQ_PWRON_LP] = {
+		.mask = RK818_IRQ_PWRON_LP_MSK,
+		.reg_offset = 0,
+	},
+	[RK818_IRQ_HOTDIE] = {
+		.mask = RK818_IRQ_HOTDIE_MSK,
+		.reg_offset = 0,
+	},
+	[RK818_IRQ_RTC_ALARM] = {
+		.mask = RK818_IRQ_RTC_ALARM_MSK,
+		.reg_offset = 0,
+	},
+	[RK818_IRQ_RTC_PERIOD] = {
+		.mask = RK818_IRQ_RTC_PERIOD_MSK,
+		.reg_offset = 0,
+	},
+	[RK818_IRQ_USB_OV] = {
+		.mask = RK818_IRQ_USB_OV_MSK,
+		.reg_offset = 0,
+	},
+
+	/* INT_STS2 */
+	[RK818_IRQ_PLUG_IN] = {
+		.mask = RK818_IRQ_PLUG_IN_MSK,
+		.reg_offset = 1,
+	},
+	[RK818_IRQ_PLUG_OUT] = {
+		.mask = RK818_IRQ_PLUG_OUT_MSK,
+		.reg_offset = 1,
+	},
+	[RK818_IRQ_CHG_OK] = {
+		.mask = RK818_IRQ_CHG_OK_MSK,
+		.reg_offset = 1,
+	},
+	[RK818_IRQ_CHG_TE] = {
+		.mask = RK818_IRQ_CHG_TE_MSK,
+		.reg_offset = 1,
+	},
+	[RK818_IRQ_CHG_TS1] = {
+		.mask = RK818_IRQ_CHG_TS1_MSK,
+		.reg_offset = 1,
+	},
+	[RK818_IRQ_TS2] = {
+		.mask = RK818_IRQ_TS2_MSK,
+		.reg_offset = 1,
+	},
+	[RK818_IRQ_CHG_CVTLIM] = {
+		.mask = RK818_IRQ_CHG_CVTLIM_MSK,
+		.reg_offset = 1,
+	},
+	[RK818_IRQ_DISCHG_ILIM] = {
+		.mask = RK818_IRQ_DISCHG_ILIM_MSK,
+		.reg_offset = 1,
+	},
+};
+
+static const struct regmap_irq rk817_irqs[RK817_IRQ_END] = {
+	REGMAP_IRQ_REG_LINE(0, 8),
+	REGMAP_IRQ_REG_LINE(1, 8),
+	REGMAP_IRQ_REG_LINE(2, 8),
+	REGMAP_IRQ_REG_LINE(3, 8),
+	REGMAP_IRQ_REG_LINE(4, 8),
+	REGMAP_IRQ_REG_LINE(5, 8),
+	REGMAP_IRQ_REG_LINE(6, 8),
+	REGMAP_IRQ_REG_LINE(7, 8),
+	REGMAP_IRQ_REG_LINE(8, 8),
+	REGMAP_IRQ_REG_LINE(9, 8),
+	REGMAP_IRQ_REG_LINE(10, 8),
+	REGMAP_IRQ_REG_LINE(11, 8),
+	REGMAP_IRQ_REG_LINE(12, 8),
+	REGMAP_IRQ_REG_LINE(13, 8),
+	REGMAP_IRQ_REG_LINE(14, 8),
+	REGMAP_IRQ_REG_LINE(15, 8),
+	REGMAP_IRQ_REG_LINE(16, 8),
+	REGMAP_IRQ_REG_LINE(17, 8),
+	REGMAP_IRQ_REG_LINE(18, 8),
+	REGMAP_IRQ_REG_LINE(19, 8),
+	REGMAP_IRQ_REG_LINE(20, 8),
+	REGMAP_IRQ_REG_LINE(21, 8),
+	REGMAP_IRQ_REG_LINE(22, 8),
+	REGMAP_IRQ_REG_LINE(23, 8)
+};
+
+static struct regmap_irq_chip rk805_irq_chip = {
+	.name = "rk805",
+	.irqs = rk805_irqs,
+	.num_irqs = ARRAY_SIZE(rk805_irqs),
+	.num_regs = 1,
+	.status_base = RK805_INT_STS_REG,
+	.mask_base = RK805_INT_STS_MSK_REG,
+	.ack_base = RK805_INT_STS_REG,
+	.init_ack_masked = true,
+};
+
+static const struct regmap_irq_chip rk808_irq_chip = {
+	.name = "rk808",
+	.irqs = rk808_irqs,
+	.num_irqs = ARRAY_SIZE(rk808_irqs),
+	.num_regs = 2,
+	.irq_reg_stride = 2,
+	.status_base = RK808_INT_STS_REG1,
+	.mask_base = RK808_INT_STS_MSK_REG1,
+	.ack_base = RK808_INT_STS_REG1,
+	.init_ack_masked = true,
+};
+
+static struct regmap_irq_chip rk817_irq_chip = {
+	.name = "rk817",
+	.irqs = rk817_irqs,
+	.num_irqs = ARRAY_SIZE(rk817_irqs),
+	.num_regs = 3,
+	.irq_reg_stride = 2,
+	.status_base = RK817_INT_STS_REG0,
+	.mask_base = RK817_INT_STS_MSK_REG0,
+	.ack_base = RK817_INT_STS_REG0,
+	.init_ack_masked = true,
+};
+
+static const struct regmap_irq_chip rk818_irq_chip = {
+	.name = "rk818",
+	.irqs = rk818_irqs,
+	.num_irqs = ARRAY_SIZE(rk818_irqs),
+	.num_regs = 2,
+	.irq_reg_stride = 2,
+	.status_base = RK818_INT_STS_REG1,
+	.mask_base = RK818_INT_STS_MSK_REG1,
+	.ack_base = RK818_INT_STS_REG1,
+	.init_ack_masked = true,
+};
+
+static struct i2c_client *rk808_i2c_client;
+
+static void rk808_pm_power_off(void)
+{
+	int ret;
+	unsigned int reg, bit;
+	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
+
+	switch (rk808->variant) {
+	case RK805_ID:
+		reg = RK805_DEV_CTRL_REG;
+		bit = DEV_OFF;
+		break;
+	case RK808_ID:
+		reg = RK808_DEVCTRL_REG,
+		bit = DEV_OFF_RST;
+		break;
+	case RK809_ID:
+	case RK817_ID:
+		reg = RK817_SYS_CFG(3);
+		bit = DEV_OFF;
+		break;
+	case RK818_ID:
+		reg = RK818_DEVCTRL_REG;
+		bit = DEV_OFF;
+		break;
+	default:
+		return;
+	}
+	ret = regmap_update_bits(rk808->regmap, reg, bit, bit);
+	if (ret)
+		dev_err(&rk808_i2c_client->dev, "Failed to shutdown device!\n");
+}
+
+static int rk808_restart_notify(struct notifier_block *this, unsigned long mode, void *cmd)
+{
+	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
+	unsigned int reg, bit;
+	int ret;
+
+	switch (rk808->variant) {
+	case RK809_ID:
+	case RK817_ID:
+		reg = RK817_SYS_CFG(3);
+		bit = DEV_RST;
+		break;
+
+	default:
+		return NOTIFY_DONE;
+	}
+	ret = regmap_update_bits(rk808->regmap, reg, bit, bit);
+	if (ret)
+		dev_err(&rk808_i2c_client->dev, "Failed to restart device!\n");
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block rk808_restart_handler = {
+	.notifier_call = rk808_restart_notify,
+	.priority = 192,
+};
+
+static void rk8xx_shutdown(struct i2c_client *client)
+{
+	struct rk808 *rk808 = i2c_get_clientdata(client);
+	int ret;
+
+	switch (rk808->variant) {
+	case RK805_ID:
+		ret = regmap_update_bits(rk808->regmap,
+					 RK805_GPIO_IO_POL_REG,
+					 SLP_SD_MSK,
+					 SHUTDOWN_FUN);
+		break;
+	case RK809_ID:
+	case RK817_ID:
+		ret = regmap_update_bits(rk808->regmap,
+					 RK817_SYS_CFG(3),
+					 RK817_SLPPIN_FUNC_MSK,
+					 SLPPIN_DN_FUN);
+		break;
+	default:
+		return;
+	}
+	if (ret)
+		dev_warn(&client->dev,
+			 "Cannot switch to power down function\n");
+}
+
+static const struct of_device_id rk808_of_match[] = {
+	{ .compatible = "rockchip,rk805" },
+	{ .compatible = "rockchip,rk808" },
+	{ .compatible = "rockchip,rk809" },
+	{ .compatible = "rockchip,rk817" },
+	{ .compatible = "rockchip,rk818" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, rk808_of_match);
+
+static int rk808_probe(struct i2c_client *client)
+{
+	struct device_node *np = client->dev.of_node;
+	struct rk808 *rk808;
+	const struct rk808_reg_data *pre_init_reg;
+	const struct mfd_cell *cells;
+	int nr_pre_init_regs;
+	int nr_cells;
+	int msb, lsb;
+	unsigned char pmic_id_msb, pmic_id_lsb;
+	int ret;
+	int i;
+
+	rk808 = devm_kzalloc(&client->dev, sizeof(*rk808), GFP_KERNEL);
+	if (!rk808)
+		return -ENOMEM;
+
+	if (of_device_is_compatible(np, "rockchip,rk817") ||
+	    of_device_is_compatible(np, "rockchip,rk809")) {
+		pmic_id_msb = RK817_ID_MSB;
+		pmic_id_lsb = RK817_ID_LSB;
+	} else {
+		pmic_id_msb = RK808_ID_MSB;
+		pmic_id_lsb = RK808_ID_LSB;
+	}
+
+	/* Read chip variant */
+	msb = i2c_smbus_read_byte_data(client, pmic_id_msb);
+	if (msb < 0) {
+		dev_err(&client->dev, "failed to read the chip id at 0x%x\n",
+			RK808_ID_MSB);
+		return msb;
+	}
+
+	lsb = i2c_smbus_read_byte_data(client, pmic_id_lsb);
+	if (lsb < 0) {
+		dev_err(&client->dev, "failed to read the chip id at 0x%x\n",
+			RK808_ID_LSB);
+		return lsb;
+	}
+
+	rk808->variant = ((msb << 8) | lsb) & RK8XX_ID_MSK;
+	dev_info(&client->dev, "chip id: 0x%x\n", (unsigned int)rk808->variant);
+
+	switch (rk808->variant) {
+	case RK805_ID:
+		rk808->regmap_cfg = &rk805_regmap_config;
+		rk808->regmap_irq_chip = &rk805_irq_chip;
+		pre_init_reg = rk805_pre_init_reg;
+		nr_pre_init_regs = ARRAY_SIZE(rk805_pre_init_reg);
+		cells = rk805s;
+		nr_cells = ARRAY_SIZE(rk805s);
+		break;
+	case RK808_ID:
+		rk808->regmap_cfg = &rk808_regmap_config;
+		rk808->regmap_irq_chip = &rk808_irq_chip;
+		pre_init_reg = rk808_pre_init_reg;
+		nr_pre_init_regs = ARRAY_SIZE(rk808_pre_init_reg);
+		cells = rk808s;
+		nr_cells = ARRAY_SIZE(rk808s);
+		break;
+	case RK818_ID:
+		rk808->regmap_cfg = &rk818_regmap_config;
+		rk808->regmap_irq_chip = &rk818_irq_chip;
+		pre_init_reg = rk818_pre_init_reg;
+		nr_pre_init_regs = ARRAY_SIZE(rk818_pre_init_reg);
+		cells = rk818s;
+		nr_cells = ARRAY_SIZE(rk818s);
+		break;
+	case RK809_ID:
+	case RK817_ID:
+		rk808->regmap_cfg = &rk817_regmap_config;
+		rk808->regmap_irq_chip = &rk817_irq_chip;
+		pre_init_reg = rk817_pre_init_reg;
+		nr_pre_init_regs = ARRAY_SIZE(rk817_pre_init_reg);
+		cells = rk817s;
+		nr_cells = ARRAY_SIZE(rk817s);
+		break;
+	default:
+		dev_err(&client->dev, "Unsupported RK8XX ID %lu\n",
+			rk808->variant);
+		return -EINVAL;
+	}
+
+	rk808->i2c = client;
+	i2c_set_clientdata(client, rk808);
+
+	rk808->regmap = devm_regmap_init_i2c(client, rk808->regmap_cfg);
+	if (IS_ERR(rk808->regmap)) {
+		dev_err(&client->dev, "regmap initialization failed\n");
+		return PTR_ERR(rk808->regmap);
+	}
+
+	if (!client->irq) {
+		dev_err(&client->dev, "No interrupt support, no core IRQ\n");
+		return -EINVAL;
+	}
+
+	ret = regmap_add_irq_chip(rk808->regmap, client->irq,
+				  IRQF_ONESHOT, -1,
+				  rk808->regmap_irq_chip, &rk808->irq_data);
+	if (ret) {
+		dev_err(&client->dev, "Failed to add irq_chip %d\n", ret);
+		return ret;
+	}
+
+	for (i = 0; i < nr_pre_init_regs; i++) {
+		ret = regmap_update_bits(rk808->regmap,
+					pre_init_reg[i].addr,
+					pre_init_reg[i].mask,
+					pre_init_reg[i].value);
+		if (ret) {
+			dev_err(&client->dev,
+				"0x%x write err\n",
+				pre_init_reg[i].addr);
+			return ret;
+		}
+	}
+
+	ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE,
+			      cells, nr_cells, NULL, 0,
+			      regmap_irq_get_domain(rk808->irq_data));
+	if (ret) {
+		dev_err(&client->dev, "failed to add MFD devices %d\n", ret);
+		goto err_irq;
+	}
+
+	if (of_property_read_bool(np, "rockchip,system-power-controller")) {
+		rk808_i2c_client = client;
+		pm_power_off = rk808_pm_power_off;
+
+		switch (rk808->variant) {
+		case RK809_ID:
+		case RK817_ID:
+			ret = register_restart_handler(&rk808_restart_handler);
+			if (ret)
+				dev_warn(&client->dev, "failed to register rst handler, %d\n", ret);
+			break;
+		default:
+			dev_dbg(&client->dev, "pmic controlled board reset not supported\n");
+			break;
+		}
+	}
+
+	return 0;
+
+err_irq:
+	regmap_del_irq_chip(client->irq, rk808->irq_data);
+	return ret;
+}
+
+static void rk808_remove(struct i2c_client *client)
+{
+	struct rk808 *rk808 = i2c_get_clientdata(client);
+
+	regmap_del_irq_chip(client->irq, rk808->irq_data);
+
+	/**
+	 * pm_power_off may points to a function from another module.
+	 * Check if the pointer is set by us and only then overwrite it.
+	 */
+	if (pm_power_off == rk808_pm_power_off)
+		pm_power_off = NULL;
+
+	unregister_restart_handler(&rk808_restart_handler);
+}
+
+static int __maybe_unused rk8xx_suspend(struct device *dev)
+{
+	struct rk808 *rk808 = i2c_get_clientdata(to_i2c_client(dev));
+	int ret = 0;
+
+	switch (rk808->variant) {
+	case RK805_ID:
+		ret = regmap_update_bits(rk808->regmap,
+					 RK805_GPIO_IO_POL_REG,
+					 SLP_SD_MSK,
+					 SLEEP_FUN);
+		break;
+	case RK809_ID:
+	case RK817_ID:
+		ret = regmap_update_bits(rk808->regmap,
+					 RK817_SYS_CFG(3),
+					 RK817_SLPPIN_FUNC_MSK,
+					 SLPPIN_SLP_FUN);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static int __maybe_unused rk8xx_resume(struct device *dev)
+{
+	struct rk808 *rk808 = i2c_get_clientdata(to_i2c_client(dev));
+	int ret = 0;
+
+	switch (rk808->variant) {
+	case RK809_ID:
+	case RK817_ID:
+		ret = regmap_update_bits(rk808->regmap,
+					 RK817_SYS_CFG(3),
+					 RK817_SLPPIN_FUNC_MSK,
+					 SLPPIN_NULL_FUN);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+static SIMPLE_DEV_PM_OPS(rk8xx_pm_ops, rk8xx_suspend, rk8xx_resume);
+
+static struct i2c_driver rk808_i2c_driver = {
+	.driver = {
+		.name = "rk808",
+		.of_match_table = rk808_of_match,
+		.pm = &rk8xx_pm_ops,
+	},
+	.probe_new = rk808_probe,
+	.remove   = rk808_remove,
+	.shutdown = rk8xx_shutdown,
+};
+
+module_i2c_driver(rk808_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
+MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");
+MODULE_DESCRIPTION("RK808/RK818 PMIC driver");