Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 404 insertions, 0 deletions

diff --git a/drivers/net/dsa/microchip/lan937x_main.c b/drivers/net/dsa/microchip/lan937x_main.c
new file mode 100644
index 000000000..399a3905e
--- /dev/null
+++ b/drivers/net/dsa/microchip/lan937x_main.c
@@ -0,0 +1,404 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Microchip LAN937X switch driver main logic
+ * Copyright (C) 2019-2022 Microchip Technology Inc.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/iopoll.h>
+#include <linux/phy.h>
+#include <linux/of_net.h>
+#include <linux/if_bridge.h>
+#include <linux/if_vlan.h>
+#include <linux/math.h>
+#include <net/dsa.h>
+#include <net/switchdev.h>
+
+#include "lan937x_reg.h"
+#include "ksz_common.h"
+#include "ksz9477.h"
+#include "lan937x.h"
+
+static int lan937x_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
+{
+	return regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0);
+}
+
+static int lan937x_port_cfg(struct ksz_device *dev, int port, int offset,
+			    u8 bits, bool set)
+{
+	return regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset),
+				  bits, set ? bits : 0);
+}
+
+static int lan937x_enable_spi_indirect_access(struct ksz_device *dev)
+{
+	u16 data16;
+	int ret;
+
+	/* Enable Phy access through SPI */
+	ret = lan937x_cfg(dev, REG_GLOBAL_CTRL_0, SW_PHY_REG_BLOCK, false);
+	if (ret < 0)
+		return ret;
+
+	ret = ksz_read16(dev, REG_VPHY_SPECIAL_CTRL__2, &data16);
+	if (ret < 0)
+		return ret;
+
+	/* Allow SPI access */
+	data16 |= VPHY_SPI_INDIRECT_ENABLE;
+
+	return ksz_write16(dev, REG_VPHY_SPECIAL_CTRL__2, data16);
+}
+
+static int lan937x_vphy_ind_addr_wr(struct ksz_device *dev, int addr, int reg)
+{
+	u16 addr_base = REG_PORT_T1_PHY_CTRL_BASE;
+	u16 temp;
+
+	/* get register address based on the logical port */
+	temp = PORT_CTRL_ADDR(addr, (addr_base + (reg << 2)));
+
+	return ksz_write16(dev, REG_VPHY_IND_ADDR__2, temp);
+}
+
+static int lan937x_internal_phy_write(struct ksz_device *dev, int addr, int reg,
+				      u16 val)
+{
+	unsigned int value;
+	int ret;
+
+	/* Check for internal phy port */
+	if (!dev->info->internal_phy[addr])
+		return -EOPNOTSUPP;
+
+	ret = lan937x_vphy_ind_addr_wr(dev, addr, reg);
+	if (ret < 0)
+		return ret;
+
+	/* Write the data to be written to the VPHY reg */
+	ret = ksz_write16(dev, REG_VPHY_IND_DATA__2, val);
+	if (ret < 0)
+		return ret;
+
+	/* Write the Write En and Busy bit */
+	ret = ksz_write16(dev, REG_VPHY_IND_CTRL__2,
+			  (VPHY_IND_WRITE | VPHY_IND_BUSY));
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read_poll_timeout(dev->regmap[1], REG_VPHY_IND_CTRL__2,
+				       value, !(value & VPHY_IND_BUSY), 10,
+				       1000);
+	if (ret < 0) {
+		dev_err(dev->dev, "Failed to write phy register\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int lan937x_internal_phy_read(struct ksz_device *dev, int addr, int reg,
+				     u16 *val)
+{
+	unsigned int value;
+	int ret;
+
+	/* Check for internal phy port, return 0xffff for non-existent phy */
+	if (!dev->info->internal_phy[addr])
+		return 0xffff;
+
+	ret = lan937x_vphy_ind_addr_wr(dev, addr, reg);
+	if (ret < 0)
+		return ret;
+
+	/* Write Read and Busy bit to start the transaction */
+	ret = ksz_write16(dev, REG_VPHY_IND_CTRL__2, VPHY_IND_BUSY);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read_poll_timeout(dev->regmap[1], REG_VPHY_IND_CTRL__2,
+				       value, !(value & VPHY_IND_BUSY), 10,
+				       1000);
+	if (ret < 0) {
+		dev_err(dev->dev, "Failed to read phy register\n");
+		return ret;
+	}
+
+	/* Read the VPHY register which has the PHY data */
+	return ksz_read16(dev, REG_VPHY_IND_DATA__2, val);
+}
+
+int lan937x_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data)
+{
+	return lan937x_internal_phy_read(dev, addr, reg, data);
+}
+
+int lan937x_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val)
+{
+	return lan937x_internal_phy_write(dev, addr, reg, val);
+}
+
+int lan937x_reset_switch(struct ksz_device *dev)
+{
+	u32 data32;
+	int ret;
+
+	/* reset switch */
+	ret = lan937x_cfg(dev, REG_SW_OPERATION, SW_RESET, true);
+	if (ret < 0)
+		return ret;
+
+	/* Enable Auto Aging */
+	ret = lan937x_cfg(dev, REG_SW_LUE_CTRL_1, SW_LINK_AUTO_AGING, true);
+	if (ret < 0)
+		return ret;
+
+	/* disable interrupts */
+	ret = ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK);
+	if (ret < 0)
+		return ret;
+
+	ret = ksz_write32(dev, REG_SW_INT_STATUS__4, POR_READY_INT);
+	if (ret < 0)
+		return ret;
+
+	ret = ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0xFF);
+	if (ret < 0)
+		return ret;
+
+	return ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32);
+}
+
+void lan937x_port_setup(struct ksz_device *dev, int port, bool cpu_port)
+{
+	const u32 *masks = dev->info->masks;
+	const u16 *regs = dev->info->regs;
+	struct dsa_switch *ds = dev->ds;
+	u8 member;
+
+	/* enable tag tail for host port */
+	if (cpu_port)
+		lan937x_port_cfg(dev, port, REG_PORT_CTRL_0,
+				 PORT_TAIL_TAG_ENABLE, true);
+
+	/* Enable the Port Queue split */
+	ksz9477_port_queue_split(dev, port);
+
+	/* set back pressure for half duplex */
+	lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE,
+			 true);
+
+	/* enable 802.1p priority */
+	lan937x_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true);
+
+	if (!dev->info->internal_phy[port])
+		lan937x_port_cfg(dev, port, regs[P_XMII_CTRL_0],
+				 masks[P_MII_TX_FLOW_CTRL] |
+				 masks[P_MII_RX_FLOW_CTRL],
+				 true);
+
+	if (cpu_port)
+		member = dsa_user_ports(ds);
+	else
+		member = BIT(dsa_upstream_port(ds, port));
+
+	dev->dev_ops->cfg_port_member(dev, port, member);
+}
+
+void lan937x_config_cpu_port(struct dsa_switch *ds)
+{
+	struct ksz_device *dev = ds->priv;
+	struct dsa_port *dp;
+
+	dsa_switch_for_each_cpu_port(dp, ds) {
+		if (dev->info->cpu_ports & (1 << dp->index)) {
+			dev->cpu_port = dp->index;
+
+			/* enable cpu port */
+			lan937x_port_setup(dev, dp->index, true);
+		}
+	}
+
+	dsa_switch_for_each_user_port(dp, ds) {
+		ksz_port_stp_state_set(ds, dp->index, BR_STATE_DISABLED);
+	}
+}
+
+int lan937x_change_mtu(struct ksz_device *dev, int port, int new_mtu)
+{
+	struct dsa_switch *ds = dev->ds;
+	int ret;
+
+	new_mtu += VLAN_ETH_HLEN + ETH_FCS_LEN;
+
+	if (dsa_is_cpu_port(ds, port))
+		new_mtu += LAN937X_TAG_LEN;
+
+	if (new_mtu >= FR_MIN_SIZE)
+		ret = lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_0,
+				       PORT_JUMBO_PACKET, true);
+	else
+		ret = lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_0,
+				       PORT_JUMBO_PACKET, false);
+	if (ret < 0) {
+		dev_err(ds->dev, "failed to enable jumbo\n");
+		return ret;
+	}
+
+	/* Write the frame size in PORT_MAX_FR_SIZE register */
+	ret = ksz_pwrite16(dev, port, PORT_MAX_FR_SIZE, new_mtu);
+	if (ret) {
+		dev_err(ds->dev, "failed to update mtu for port %d\n", port);
+		return ret;
+	}
+
+	return 0;
+}
+
+int lan937x_set_ageing_time(struct ksz_device *dev, unsigned int msecs)
+{
+	u32 secs = msecs / 1000;
+	u32 value;
+	int ret;
+
+	value = FIELD_GET(SW_AGE_PERIOD_7_0_M, secs);
+
+	ret = ksz_write8(dev, REG_SW_AGE_PERIOD__1, value);
+	if (ret < 0)
+		return ret;
+
+	value = FIELD_GET(SW_AGE_PERIOD_19_8_M, secs);
+
+	return ksz_write16(dev, REG_SW_AGE_PERIOD__2, value);
+}
+
+static void lan937x_set_tune_adj(struct ksz_device *dev, int port,
+				 u16 reg, u8 val)
+{
+	u16 data16;
+
+	ksz_pread16(dev, port, reg, &data16);
+
+	/* Update tune Adjust */
+	data16 |= FIELD_PREP(PORT_TUNE_ADJ, val);
+	ksz_pwrite16(dev, port, reg, data16);
+
+	/* write DLL reset to take effect */
+	data16 |= PORT_DLL_RESET;
+	ksz_pwrite16(dev, port, reg, data16);
+}
+
+static void lan937x_set_rgmii_tx_delay(struct ksz_device *dev, int port)
+{
+	u8 val;
+
+	/* Apply different codes based on the ports as per characterization
+	 * results
+	 */
+	val = (port == LAN937X_RGMII_1_PORT) ? RGMII_1_TX_DELAY_2NS :
+		RGMII_2_TX_DELAY_2NS;
+
+	lan937x_set_tune_adj(dev, port, REG_PORT_XMII_CTRL_5, val);
+}
+
+static void lan937x_set_rgmii_rx_delay(struct ksz_device *dev, int port)
+{
+	u8 val;
+
+	val = (port == LAN937X_RGMII_1_PORT) ? RGMII_1_RX_DELAY_2NS :
+		RGMII_2_RX_DELAY_2NS;
+
+	lan937x_set_tune_adj(dev, port, REG_PORT_XMII_CTRL_4, val);
+}
+
+void lan937x_phylink_get_caps(struct ksz_device *dev, int port,
+			      struct phylink_config *config)
+{
+	config->mac_capabilities = MAC_100FD;
+
+	if (dev->info->supports_rgmii[port]) {
+		/* MII/RMII/RGMII ports */
+		config->mac_capabilities |= MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+					    MAC_100HD | MAC_10 | MAC_1000FD;
+	}
+}
+
+void lan937x_setup_rgmii_delay(struct ksz_device *dev, int port)
+{
+	struct ksz_port *p = &dev->ports[port];
+
+	if (p->rgmii_tx_val) {
+		lan937x_set_rgmii_tx_delay(dev, port);
+		dev_info(dev->dev, "Applied rgmii tx delay for the port %d\n",
+			 port);
+	}
+
+	if (p->rgmii_rx_val) {
+		lan937x_set_rgmii_rx_delay(dev, port);
+		dev_info(dev->dev, "Applied rgmii rx delay for the port %d\n",
+			 port);
+	}
+}
+
+int lan937x_tc_cbs_set_cinc(struct ksz_device *dev, int port, u32 val)
+{
+	return ksz_pwrite32(dev, port, REG_PORT_MTI_CREDIT_INCREMENT, val);
+}
+
+int lan937x_switch_init(struct ksz_device *dev)
+{
+	dev->port_mask = (1 << dev->info->port_cnt) - 1;
+
+	return 0;
+}
+
+int lan937x_setup(struct dsa_switch *ds)
+{
+	struct ksz_device *dev = ds->priv;
+	int ret;
+
+	/* enable Indirect Access from SPI to the VPHY registers */
+	ret = lan937x_enable_spi_indirect_access(dev);
+	if (ret < 0) {
+		dev_err(dev->dev, "failed to enable spi indirect access");
+		return ret;
+	}
+
+	/* The VLAN aware is a global setting. Mixed vlan
+	 * filterings are not supported.
+	 */
+	ds->vlan_filtering_is_global = true;
+
+	/* Enable aggressive back off for half duplex & UNH mode */
+	lan937x_cfg(dev, REG_SW_MAC_CTRL_0,
+		    (SW_PAUSE_UNH_MODE | SW_NEW_BACKOFF | SW_AGGR_BACKOFF),
+		    true);
+
+	/* If NO_EXC_COLLISION_DROP bit is set, the switch will not drop
+	 * packets when 16 or more collisions occur
+	 */
+	lan937x_cfg(dev, REG_SW_MAC_CTRL_1, NO_EXC_COLLISION_DROP, true);
+
+	/* enable global MIB counter freeze function */
+	lan937x_cfg(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FREEZE, true);
+
+	/* disable CLK125 & CLK25, 1: disable, 0: enable */
+	lan937x_cfg(dev, REG_SW_GLOBAL_OUTPUT_CTRL__1,
+		    (SW_CLK125_ENB | SW_CLK25_ENB), true);
+
+	return 0;
+}
+
+void lan937x_teardown(struct dsa_switch *ds)
+{
+
+}
+
+void lan937x_switch_exit(struct ksz_device *dev)
+{
+	lan937x_reset_switch(dev);
+}
+
+MODULE_AUTHOR("Arun Ramadoss <arun.ramadoss@microchip.com>");
+MODULE_DESCRIPTION("Microchip LAN937x Series Switch DSA Driver");
+MODULE_LICENSE("GPL");