Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 287 insertions, 0 deletions

diff --git a/drivers/net/dsa/realtek/realtek-mdio.c b/drivers/net/dsa/realtek/realtek-mdio.c
new file mode 100644
index 000000000..3e54fac5f
--- /dev/null
+++ b/drivers/net/dsa/realtek/realtek-mdio.c
@@ -0,0 +1,287 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Realtek MDIO interface driver
+ *
+ * ASICs we intend to support with this driver:
+ *
+ * RTL8366   - The original version, apparently
+ * RTL8369   - Similar enough to have the same datsheet as RTL8366
+ * RTL8366RB - Probably reads out "RTL8366 revision B", has a quite
+ *             different register layout from the other two
+ * RTL8366S  - Is this "RTL8366 super"?
+ * RTL8367   - Has an OpenWRT driver as well
+ * RTL8368S  - Seems to be an alternative name for RTL8366RB
+ * RTL8370   - Also uses SMI
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
+ * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
+ * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com>
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#include "realtek.h"
+
+/* Read/write via mdiobus */
+#define REALTEK_MDIO_CTRL0_REG		31
+#define REALTEK_MDIO_START_REG		29
+#define REALTEK_MDIO_CTRL1_REG		21
+#define REALTEK_MDIO_ADDRESS_REG	23
+#define REALTEK_MDIO_DATA_WRITE_REG	24
+#define REALTEK_MDIO_DATA_READ_REG	25
+
+#define REALTEK_MDIO_START_OP		0xFFFF
+#define REALTEK_MDIO_ADDR_OP		0x000E
+#define REALTEK_MDIO_READ_OP		0x0001
+#define REALTEK_MDIO_WRITE_OP		0x0003
+
+static int realtek_mdio_write(void *ctx, u32 reg, u32 val)
+{
+	struct realtek_priv *priv = ctx;
+	struct mii_bus *bus = priv->bus;
+	int ret;
+
+	mutex_lock(&bus->mdio_lock);
+
+	ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL0_REG, REALTEK_MDIO_ADDR_OP);
+	if (ret)
+		goto out_unlock;
+
+	ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_ADDRESS_REG, reg);
+	if (ret)
+		goto out_unlock;
+
+	ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_DATA_WRITE_REG, val);
+	if (ret)
+		goto out_unlock;
+
+	ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL1_REG, REALTEK_MDIO_WRITE_OP);
+
+out_unlock:
+	mutex_unlock(&bus->mdio_lock);
+
+	return ret;
+}
+
+static int realtek_mdio_read(void *ctx, u32 reg, u32 *val)
+{
+	struct realtek_priv *priv = ctx;
+	struct mii_bus *bus = priv->bus;
+	int ret;
+
+	mutex_lock(&bus->mdio_lock);
+
+	ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL0_REG, REALTEK_MDIO_ADDR_OP);
+	if (ret)
+		goto out_unlock;
+
+	ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_ADDRESS_REG, reg);
+	if (ret)
+		goto out_unlock;
+
+	ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL1_REG, REALTEK_MDIO_READ_OP);
+	if (ret)
+		goto out_unlock;
+
+	ret = bus->read(bus, priv->mdio_addr, REALTEK_MDIO_DATA_READ_REG);
+	if (ret >= 0) {
+		*val = ret;
+		ret = 0;
+	}
+
+out_unlock:
+	mutex_unlock(&bus->mdio_lock);
+
+	return ret;
+}
+
+static void realtek_mdio_lock(void *ctx)
+{
+	struct realtek_priv *priv = ctx;
+
+	mutex_lock(&priv->map_lock);
+}
+
+static void realtek_mdio_unlock(void *ctx)
+{
+	struct realtek_priv *priv = ctx;
+
+	mutex_unlock(&priv->map_lock);
+}
+
+static const struct regmap_config realtek_mdio_regmap_config = {
+	.reg_bits = 10, /* A4..A0 R4..R0 */
+	.val_bits = 16,
+	.reg_stride = 1,
+	/* PHY regs are at 0x8000 */
+	.max_register = 0xffff,
+	.reg_format_endian = REGMAP_ENDIAN_BIG,
+	.reg_read = realtek_mdio_read,
+	.reg_write = realtek_mdio_write,
+	.cache_type = REGCACHE_NONE,
+	.lock = realtek_mdio_lock,
+	.unlock = realtek_mdio_unlock,
+};
+
+static const struct regmap_config realtek_mdio_nolock_regmap_config = {
+	.reg_bits = 10, /* A4..A0 R4..R0 */
+	.val_bits = 16,
+	.reg_stride = 1,
+	/* PHY regs are at 0x8000 */
+	.max_register = 0xffff,
+	.reg_format_endian = REGMAP_ENDIAN_BIG,
+	.reg_read = realtek_mdio_read,
+	.reg_write = realtek_mdio_write,
+	.cache_type = REGCACHE_NONE,
+	.disable_locking = true,
+};
+
+static int realtek_mdio_probe(struct mdio_device *mdiodev)
+{
+	struct realtek_priv *priv;
+	struct device *dev = &mdiodev->dev;
+	const struct realtek_variant *var;
+	struct regmap_config rc;
+	struct device_node *np;
+	int ret;
+
+	var = of_device_get_match_data(dev);
+	if (!var)
+		return -EINVAL;
+
+	priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	mutex_init(&priv->map_lock);
+
+	rc = realtek_mdio_regmap_config;
+	rc.lock_arg = priv;
+	priv->map = devm_regmap_init(dev, NULL, priv, &rc);
+	if (IS_ERR(priv->map)) {
+		ret = PTR_ERR(priv->map);
+		dev_err(dev, "regmap init failed: %d\n", ret);
+		return ret;
+	}
+
+	rc = realtek_mdio_nolock_regmap_config;
+	priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc);
+	if (IS_ERR(priv->map_nolock)) {
+		ret = PTR_ERR(priv->map_nolock);
+		dev_err(dev, "regmap init failed: %d\n", ret);
+		return ret;
+	}
+
+	priv->mdio_addr = mdiodev->addr;
+	priv->bus = mdiodev->bus;
+	priv->dev = &mdiodev->dev;
+	priv->chip_data = (void *)priv + sizeof(*priv);
+
+	priv->clk_delay = var->clk_delay;
+	priv->cmd_read = var->cmd_read;
+	priv->cmd_write = var->cmd_write;
+	priv->ops = var->ops;
+
+	priv->write_reg_noack = realtek_mdio_write;
+
+	np = dev->of_node;
+
+	dev_set_drvdata(dev, priv);
+
+	/* TODO: if power is software controlled, set up any regulators here */
+	priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds");
+
+	priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(priv->reset)) {
+		dev_err(dev, "failed to get RESET GPIO\n");
+		return PTR_ERR(priv->reset);
+	}
+
+	if (priv->reset) {
+		gpiod_set_value(priv->reset, 1);
+		dev_dbg(dev, "asserted RESET\n");
+		msleep(REALTEK_HW_STOP_DELAY);
+		gpiod_set_value(priv->reset, 0);
+		msleep(REALTEK_HW_START_DELAY);
+		dev_dbg(dev, "deasserted RESET\n");
+	}
+
+	ret = priv->ops->detect(priv);
+	if (ret) {
+		dev_err(dev, "unable to detect switch\n");
+		return ret;
+	}
+
+	priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL);
+	if (!priv->ds)
+		return -ENOMEM;
+
+	priv->ds->dev = dev;
+	priv->ds->num_ports = priv->num_ports;
+	priv->ds->priv = priv;
+	priv->ds->ops = var->ds_ops_mdio;
+
+	ret = dsa_register_switch(priv->ds);
+	if (ret) {
+		dev_err(priv->dev, "unable to register switch ret = %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void realtek_mdio_remove(struct mdio_device *mdiodev)
+{
+	struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev);
+
+	if (!priv)
+		return;
+
+	dsa_unregister_switch(priv->ds);
+
+	/* leave the device reset asserted */
+	if (priv->reset)
+		gpiod_set_value(priv->reset, 1);
+}
+
+static void realtek_mdio_shutdown(struct mdio_device *mdiodev)
+{
+	struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev);
+
+	if (!priv)
+		return;
+
+	dsa_switch_shutdown(priv->ds);
+
+	dev_set_drvdata(&mdiodev->dev, NULL);
+}
+
+static const struct of_device_id realtek_mdio_of_match[] = {
+#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB)
+	{ .compatible = "realtek,rtl8366rb", .data = &rtl8366rb_variant, },
+#endif
+#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8365MB)
+	{ .compatible = "realtek,rtl8365mb", .data = &rtl8365mb_variant, },
+#endif
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, realtek_mdio_of_match);
+
+static struct mdio_driver realtek_mdio_driver = {
+	.mdiodrv.driver = {
+		.name = "realtek-mdio",
+		.of_match_table = of_match_ptr(realtek_mdio_of_match),
+	},
+	.probe  = realtek_mdio_probe,
+	.remove = realtek_mdio_remove,
+	.shutdown = realtek_mdio_shutdown,
+};
+
+mdio_module_driver(realtek_mdio_driver);
+
+MODULE_AUTHOR("Luiz Angelo Daros de Luca <luizluca@gmail.com>");
+MODULE_DESCRIPTION("Driver for Realtek ethernet switch connected via MDIO interface");
+MODULE_LICENSE("GPL");