Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 244 insertions, 0 deletions

diff --git a/drivers/net/wan/slic_ds26522.c b/drivers/net/wan/slic_ds26522.c
new file mode 100644
index 000000000..6063552ce
--- /dev/null
+++ b/drivers/net/wan/slic_ds26522.c
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * drivers/net/wan/slic_ds26522.c
+ *
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * Author:Zhao Qiang<qiang.zhao@nxp.com>
+ */
+
+#include <linux/bitrev.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/kthread.h>
+#include <linux/spi/spi.h>
+#include <linux/wait.h>
+#include <linux/param.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include "slic_ds26522.h"
+
+#define SLIC_TRANS_LEN 1
+#define SLIC_TWO_LEN 2
+#define SLIC_THREE_LEN 3
+
+static struct spi_device *g_spi;
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Zhao Qiang<B45475@freescale.com>");
+
+/* the read/write format of address is
+ * w/r|A13|A12|A11|A10|A9|A8|A7|A6|A5|A4|A3|A2|A1|A0|x
+ */
+static void slic_write(struct spi_device *spi, u16 addr,
+		       u8 data)
+{
+	u8 temp[3];
+
+	addr = bitrev16(addr) >> 1;
+	data = bitrev8(data);
+	temp[0] = (u8)((addr >> 8) & 0x7f);
+	temp[1] = (u8)(addr & 0xfe);
+	temp[2] = data;
+
+	/* write spi addr and value */
+	spi_write(spi, &temp[0], SLIC_THREE_LEN);
+}
+
+static u8 slic_read(struct spi_device *spi, u16 addr)
+{
+	u8 temp[2];
+	u8 data;
+
+	addr = bitrev16(addr) >> 1;
+	temp[0] = (u8)(((addr >> 8) & 0x7f) | 0x80);
+	temp[1] = (u8)(addr & 0xfe);
+
+	spi_write_then_read(spi, &temp[0], SLIC_TWO_LEN, &data,
+			    SLIC_TRANS_LEN);
+
+	data = bitrev8(data);
+	return data;
+}
+
+static bool get_slic_product_code(struct spi_device *spi)
+{
+	u8 device_id;
+
+	device_id = slic_read(spi, DS26522_IDR_ADDR);
+	if ((device_id & 0xf8) == 0x68)
+		return true;
+	else
+		return false;
+}
+
+static void ds26522_e1_spec_config(struct spi_device *spi)
+{
+	/* Receive E1 Mode, Framer Disabled */
+	slic_write(spi, DS26522_RMMR_ADDR, DS26522_RMMR_E1);
+
+	/* Transmit E1 Mode, Framer Disable */
+	slic_write(spi, DS26522_TMMR_ADDR, DS26522_TMMR_E1);
+
+	/* Receive E1 Mode Framer Enable */
+	slic_write(spi, DS26522_RMMR_ADDR,
+		   slic_read(spi, DS26522_RMMR_ADDR) | DS26522_RMMR_FRM_EN);
+
+	/* Transmit E1 Mode Framer Enable */
+	slic_write(spi, DS26522_TMMR_ADDR,
+		   slic_read(spi, DS26522_TMMR_ADDR) | DS26522_TMMR_FRM_EN);
+
+	/* RCR1, receive E1 B8zs & ESF */
+	slic_write(spi, DS26522_RCR1_ADDR,
+		   DS26522_RCR1_E1_HDB3 | DS26522_RCR1_E1_CCS);
+
+	/* RSYSCLK=2.048MHz, RSYNC-Output */
+	slic_write(spi, DS26522_RIOCR_ADDR,
+		   DS26522_RIOCR_2048KHZ | DS26522_RIOCR_RSIO_OUT);
+
+	/* TCR1 Transmit E1 b8zs */
+	slic_write(spi, DS26522_TCR1_ADDR, DS26522_TCR1_TB8ZS);
+
+	/* TSYSCLK=2.048MHz, TSYNC-Output */
+	slic_write(spi, DS26522_TIOCR_ADDR,
+		   DS26522_TIOCR_2048KHZ | DS26522_TIOCR_TSIO_OUT);
+
+	/* Set E1TAF */
+	slic_write(spi, DS26522_E1TAF_ADDR, DS26522_E1TAF_DEFAULT);
+
+	/* Set E1TNAF register */
+	slic_write(spi, DS26522_E1TNAF_ADDR, DS26522_E1TNAF_DEFAULT);
+
+	/* Receive E1 Mode Framer Enable & init Done */
+	slic_write(spi, DS26522_RMMR_ADDR, slic_read(spi, DS26522_RMMR_ADDR) |
+		   DS26522_RMMR_INIT_DONE);
+
+	/* Transmit E1 Mode Framer Enable & init Done */
+	slic_write(spi, DS26522_TMMR_ADDR, slic_read(spi, DS26522_TMMR_ADDR) |
+		   DS26522_TMMR_INIT_DONE);
+
+	/* Configure LIU E1 mode */
+	slic_write(spi, DS26522_LTRCR_ADDR, DS26522_LTRCR_E1);
+
+	/* E1 Mode default 75 ohm w/Transmit Impedance Matlinking */
+	slic_write(spi, DS26522_LTITSR_ADDR,
+		   DS26522_LTITSR_TLIS_75OHM | DS26522_LTITSR_LBOS_75OHM);
+
+	/* E1 Mode default 75 ohm Long Haul w/Receive Impedance Matlinking */
+	slic_write(spi, DS26522_LRISMR_ADDR,
+		   DS26522_LRISMR_75OHM | DS26522_LRISMR_MAX);
+
+	/* Enable Transmit output */
+	slic_write(spi, DS26522_LMCR_ADDR, DS26522_LMCR_TE);
+}
+
+static int slic_ds26522_init_configure(struct spi_device *spi)
+{
+	u16 addr;
+
+	/* set clock */
+	slic_write(spi, DS26522_GTCCR_ADDR, DS26522_GTCCR_BPREFSEL_REFCLKIN |
+			DS26522_GTCCR_BFREQSEL_2048KHZ |
+			DS26522_GTCCR_FREQSEL_2048KHZ);
+	slic_write(spi, DS26522_GTCR2_ADDR, DS26522_GTCR2_TSSYNCOUT);
+	slic_write(spi, DS26522_GFCR_ADDR, DS26522_GFCR_BPCLK_2048KHZ);
+
+	/* set gtcr */
+	slic_write(spi, DS26522_GTCR1_ADDR, DS26522_GTCR1);
+
+	/* Global LIU Software Reset Register */
+	slic_write(spi, DS26522_GLSRR_ADDR, DS26522_GLSRR_RESET);
+
+	/* Global Framer and BERT Software Reset Register */
+	slic_write(spi, DS26522_GFSRR_ADDR, DS26522_GFSRR_RESET);
+
+	usleep_range(100, 120);
+
+	slic_write(spi, DS26522_GLSRR_ADDR, DS26522_GLSRR_NORMAL);
+	slic_write(spi, DS26522_GFSRR_ADDR, DS26522_GFSRR_NORMAL);
+
+	/* Perform RX/TX SRESET,Reset receiver */
+	slic_write(spi, DS26522_RMMR_ADDR, DS26522_RMMR_SFTRST);
+
+	/* Reset tranceiver */
+	slic_write(spi, DS26522_TMMR_ADDR, DS26522_TMMR_SFTRST);
+
+	usleep_range(100, 120);
+
+	/* Zero all Framer Registers */
+	for (addr = DS26522_RF_ADDR_START; addr <= DS26522_RF_ADDR_END;
+	     addr++)
+		slic_write(spi, addr, 0);
+
+	for (addr = DS26522_TF_ADDR_START; addr <= DS26522_TF_ADDR_END;
+	     addr++)
+		slic_write(spi, addr, 0);
+
+	for (addr = DS26522_LIU_ADDR_START; addr <= DS26522_LIU_ADDR_END;
+	     addr++)
+		slic_write(spi, addr, 0);
+
+	for (addr = DS26522_BERT_ADDR_START; addr <= DS26522_BERT_ADDR_END;
+	     addr++)
+		slic_write(spi, addr, 0);
+
+	/* setup ds26522 for E1 specification */
+	ds26522_e1_spec_config(spi);
+
+	slic_write(spi, DS26522_GTCR1_ADDR, 0x00);
+
+	return 0;
+}
+
+static void slic_ds26522_remove(struct spi_device *spi)
+{
+	pr_info("DS26522 module uninstalled\n");
+}
+
+static int slic_ds26522_probe(struct spi_device *spi)
+{
+	int ret = 0;
+
+	g_spi = spi;
+	spi->bits_per_word = 8;
+
+	if (!get_slic_product_code(spi))
+		return ret;
+
+	ret = slic_ds26522_init_configure(spi);
+	if (ret == 0)
+		pr_info("DS26522 cs%d configured\n", spi->chip_select);
+
+	return ret;
+}
+
+static const struct spi_device_id slic_ds26522_id[] = {
+	{ .name = "ds26522" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(spi, slic_ds26522_id);
+
+static const struct of_device_id slic_ds26522_match[] = {
+	{
+	 .compatible = "maxim,ds26522",
+	 },
+	{},
+};
+MODULE_DEVICE_TABLE(of, slic_ds26522_match);
+
+static struct spi_driver slic_ds26522_driver = {
+	.driver = {
+		   .name = "ds26522",
+		   .bus = &spi_bus_type,
+		   .of_match_table = slic_ds26522_match,
+		   },
+	.probe = slic_ds26522_probe,
+	.remove = slic_ds26522_remove,
+	.id_table = slic_ds26522_id,
+};
+
+module_spi_driver(slic_ds26522_driver);