Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 600 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
new file mode 100644
index 000000000..23ac6b7c2
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
@@ -0,0 +1,600 @@
+/*
+ * Copyright (c) 2008-2011 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/**
+ * DOC: Programming Atheros 802.11n analog front end radios
+ *
+ * AR5416 MAC based PCI devices and AR518 MAC based PCI-Express
+ * devices have either an external AR2133 analog front end radio for single
+ * band 2.4 GHz communication or an AR5133 analog front end radio for dual
+ * band 2.4 GHz / 5 GHz communication.
+ *
+ * All devices after the AR5416 and AR5418 family starting with the AR9280
+ * have their analog front radios, MAC/BB and host PCIe/USB interface embedded
+ * into a single-chip and require less programming.
+ *
+ * The following single-chips exist with a respective embedded radio:
+ *
+ * AR9280 - 11n dual-band 2x2 MIMO for PCIe
+ * AR9281 - 11n single-band 1x2 MIMO for PCIe
+ * AR9285 - 11n single-band 1x1 for PCIe
+ * AR9287 - 11n single-band 2x2 MIMO for PCIe
+ *
+ * AR9220 - 11n dual-band 2x2 MIMO for PCI
+ * AR9223 - 11n single-band 2x2 MIMO for PCI
+ *
+ * AR9287 - 11n single-band 1x1 MIMO for USB
+ */
+
+#include "hw.h"
+#include "ar9002_phy.h"
+
+/**
+ * ar9002_hw_set_channel - set channel on single-chip device
+ * @ah: atheros hardware structure
+ * @chan:
+ *
+ * This is the function to change channel on single-chip devices, that is
+ * all devices after ar9280.
+ *
+ * This function takes the channel value in MHz and sets
+ * hardware channel value. Assumes writes have been enabled to analog bus.
+ *
+ * Actual Expression,
+ *
+ * For 2GHz channel,
+ * Channel Frequency = (3/4) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^17)
+ * (freq_ref = 40MHz)
+ *
+ * For 5GHz channel,
+ * Channel Frequency = (3/2) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^10)
+ * (freq_ref = 40MHz/(24>>amodeRefSel))
+ */
+static int ar9002_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
+{
+	u16 bMode, fracMode, aModeRefSel = 0;
+	u32 freq, ndiv, channelSel = 0, channelFrac = 0, reg32 = 0;
+	struct chan_centers centers;
+	u32 refDivA = 24;
+
+	ath9k_hw_get_channel_centers(ah, chan, &centers);
+	freq = centers.synth_center;
+
+	reg32 = REG_READ(ah, AR_PHY_SYNTH_CONTROL);
+	reg32 &= 0xc0000000;
+
+	if (freq < 4800) { /* 2 GHz, fractional mode */
+		u32 txctl;
+		int regWrites = 0;
+
+		bMode = 1;
+		fracMode = 1;
+		aModeRefSel = 0;
+		channelSel = CHANSEL_2G(freq);
+
+		if (AR_SREV_9287_11_OR_LATER(ah)) {
+			if (freq == 2484) {
+				/* Enable channel spreading for channel 14 */
+				REG_WRITE_ARRAY(&ah->iniCckfirJapan2484,
+						1, regWrites);
+			} else {
+				REG_WRITE_ARRAY(&ah->iniCckfirNormal,
+						1, regWrites);
+			}
+		} else {
+			txctl = REG_READ(ah, AR_PHY_CCK_TX_CTRL);
+			if (freq == 2484) {
+				/* Enable channel spreading for channel 14 */
+				REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
+					  txctl | AR_PHY_CCK_TX_CTRL_JAPAN);
+			} else {
+				REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
+					  txctl & ~AR_PHY_CCK_TX_CTRL_JAPAN);
+			}
+		}
+	} else {
+		bMode = 0;
+		fracMode = 0;
+
+		switch (ah->eep_ops->get_eeprom(ah, EEP_FRAC_N_5G)) {
+		case 0:
+			if (IS_CHAN_HALF_RATE(chan) || IS_CHAN_QUARTER_RATE(chan))
+				aModeRefSel = 0;
+			else if ((freq % 20) == 0)
+				aModeRefSel = 3;
+			else if ((freq % 10) == 0)
+				aModeRefSel = 2;
+			if (aModeRefSel)
+				break;
+			fallthrough;
+		case 1:
+		default:
+			aModeRefSel = 0;
+			/*
+			 * Enable 2G (fractional) mode for channels
+			 * which are 5MHz spaced.
+			 */
+			fracMode = 1;
+			refDivA = 1;
+			channelSel = CHANSEL_5G(freq);
+
+			/* RefDivA setting */
+			ath9k_hw_analog_shift_rmw(ah, AR_AN_SYNTH9,
+				      AR_AN_SYNTH9_REFDIVA,
+				      AR_AN_SYNTH9_REFDIVA_S, refDivA);
+
+		}
+
+		if (!fracMode) {
+			ndiv = (freq * (refDivA >> aModeRefSel)) / 60;
+			channelSel = ndiv & 0x1ff;
+			channelFrac = (ndiv & 0xfffffe00) * 2;
+			channelSel = (channelSel << 17) | channelFrac;
+		}
+	}
+
+	reg32 = reg32 |
+	    (bMode << 29) |
+	    (fracMode << 28) | (aModeRefSel << 26) | (channelSel);
+
+	REG_WRITE(ah, AR_PHY_SYNTH_CONTROL, reg32);
+
+	ah->curchan = chan;
+
+	return 0;
+}
+
+/**
+ * ar9002_hw_spur_mitigate - convert baseband spur frequency
+ * @ah: atheros hardware structure
+ * @chan:
+ *
+ * For single-chip solutions. Converts to baseband spur frequency given the
+ * input channel frequency and compute register settings below.
+ */
+static void ar9002_hw_spur_mitigate(struct ath_hw *ah,
+				    struct ath9k_channel *chan)
+{
+	int bb_spur = AR_NO_SPUR;
+	int freq;
+	int bin;
+	int bb_spur_off, spur_subchannel_sd;
+	int spur_freq_sd;
+	int spur_delta_phase;
+	int denominator;
+	int tmp, newVal;
+	int i;
+	struct chan_centers centers;
+
+	int cur_bb_spur;
+	bool is2GHz = IS_CHAN_2GHZ(chan);
+
+	ath9k_hw_get_channel_centers(ah, chan, &centers);
+	freq = centers.synth_center;
+
+	for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
+		cur_bb_spur = ah->eep_ops->get_spur_channel(ah, i, is2GHz);
+
+		if (AR_NO_SPUR == cur_bb_spur)
+			break;
+
+		if (is2GHz)
+			cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_2GHZ;
+		else
+			cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_5GHZ;
+
+		cur_bb_spur = cur_bb_spur - freq;
+
+		if (IS_CHAN_HT40(chan)) {
+			if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT40) &&
+			    (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT40)) {
+				bb_spur = cur_bb_spur;
+				break;
+			}
+		} else if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT20) &&
+			   (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT20)) {
+			bb_spur = cur_bb_spur;
+			break;
+		}
+	}
+
+	if (AR_NO_SPUR == bb_spur) {
+		REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK,
+			    AR_PHY_FORCE_CLKEN_CCK_MRC_MUX);
+		return;
+	} else {
+		REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK,
+			    AR_PHY_FORCE_CLKEN_CCK_MRC_MUX);
+	}
+
+	bin = bb_spur * 320;
+
+	tmp = REG_READ(ah, AR_PHY_TIMING_CTRL4(0));
+
+	ENABLE_REGWRITE_BUFFER(ah);
+
+	newVal = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI |
+			AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER |
+			AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK |
+			AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK);
+	REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0), newVal);
+
+	newVal = (AR_PHY_SPUR_REG_MASK_RATE_CNTL |
+		  AR_PHY_SPUR_REG_ENABLE_MASK_PPM |
+		  AR_PHY_SPUR_REG_MASK_RATE_SELECT |
+		  AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI |
+		  SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH));
+	REG_WRITE(ah, AR_PHY_SPUR_REG, newVal);
+
+	if (IS_CHAN_HT40(chan)) {
+		if (bb_spur < 0) {
+			spur_subchannel_sd = 1;
+			bb_spur_off = bb_spur + 10;
+		} else {
+			spur_subchannel_sd = 0;
+			bb_spur_off = bb_spur - 10;
+		}
+	} else {
+		spur_subchannel_sd = 0;
+		bb_spur_off = bb_spur;
+	}
+
+	if (IS_CHAN_HT40(chan))
+		spur_delta_phase =
+			((bb_spur * 262144) /
+			 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE;
+	else
+		spur_delta_phase =
+			((bb_spur * 524288) /
+			 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE;
+
+	denominator = IS_CHAN_2GHZ(chan) ? 44 : 40;
+	spur_freq_sd = ((bb_spur_off * 2048) / denominator) & 0x3ff;
+
+	newVal = (AR_PHY_TIMING11_USE_SPUR_IN_AGC |
+		  SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) |
+		  SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE));
+	REG_WRITE(ah, AR_PHY_TIMING11, newVal);
+
+	newVal = spur_subchannel_sd << AR_PHY_SFCORR_SPUR_SUBCHNL_SD_S;
+	REG_WRITE(ah, AR_PHY_SFCORR_EXT, newVal);
+
+	ar5008_hw_cmn_spur_mitigate(ah, chan, bin);
+
+	REGWRITE_BUFFER_FLUSH(ah);
+}
+
+static void ar9002_olc_init(struct ath_hw *ah)
+{
+	u32 i;
+
+	if (!OLC_FOR_AR9280_20_LATER(ah))
+		return;
+
+	if (OLC_FOR_AR9287_10_LATER(ah)) {
+		REG_SET_BIT(ah, AR_PHY_TX_PWRCTRL9,
+				AR_PHY_TX_PWRCTRL9_RES_DC_REMOVAL);
+		ath9k_hw_analog_shift_rmw(ah, AR9287_AN_TXPC0,
+				AR9287_AN_TXPC0_TXPCMODE,
+				AR9287_AN_TXPC0_TXPCMODE_S,
+				AR9287_AN_TXPC0_TXPCMODE_TEMPSENSE);
+		udelay(100);
+	} else {
+		for (i = 0; i < AR9280_TX_GAIN_TABLE_SIZE; i++)
+			ah->originalGain[i] =
+				MS(REG_READ(ah, AR_PHY_TX_GAIN_TBL1 + i * 4),
+						AR_PHY_TX_GAIN);
+		ah->PDADCdelta = 0;
+	}
+}
+
+static u32 ar9002_hw_compute_pll_control(struct ath_hw *ah,
+					 struct ath9k_channel *chan)
+{
+	int ref_div = 5;
+	int pll_div = 0x2c;
+	u32 pll;
+
+	if (chan && IS_CHAN_5GHZ(chan) && !IS_CHAN_A_FAST_CLOCK(ah, chan)) {
+		if (AR_SREV_9280_20(ah)) {
+			ref_div = 10;
+			pll_div = 0x50;
+		} else {
+			pll_div = 0x28;
+		}
+	}
+
+	pll = SM(ref_div, AR_RTC_9160_PLL_REFDIV);
+	pll |= SM(pll_div, AR_RTC_9160_PLL_DIV);
+
+	if (chan && IS_CHAN_HALF_RATE(chan))
+		pll |= SM(0x1, AR_RTC_9160_PLL_CLKSEL);
+	else if (chan && IS_CHAN_QUARTER_RATE(chan))
+		pll |= SM(0x2, AR_RTC_9160_PLL_CLKSEL);
+
+	return pll;
+}
+
+static void ar9002_hw_do_getnf(struct ath_hw *ah,
+			      int16_t nfarray[NUM_NF_READINGS])
+{
+	int16_t nf;
+
+	nf = MS(REG_READ(ah, AR_PHY_CCA), AR9280_PHY_MINCCA_PWR);
+	nfarray[0] = sign_extend32(nf, 8);
+
+	nf = MS(REG_READ(ah, AR_PHY_EXT_CCA), AR9280_PHY_EXT_MINCCA_PWR);
+	if (IS_CHAN_HT40(ah->curchan))
+		nfarray[3] = sign_extend32(nf, 8);
+
+	if (!(ah->rxchainmask & BIT(1)))
+		return;
+
+	nf = MS(REG_READ(ah, AR_PHY_CH1_CCA), AR9280_PHY_CH1_MINCCA_PWR);
+	nfarray[1] = sign_extend32(nf, 8);
+
+	nf = MS(REG_READ(ah, AR_PHY_CH1_EXT_CCA), AR9280_PHY_CH1_EXT_MINCCA_PWR);
+	if (IS_CHAN_HT40(ah->curchan))
+		nfarray[4] = sign_extend32(nf, 8);
+}
+
+static void ar9002_hw_set_nf_limits(struct ath_hw *ah)
+{
+	if (AR_SREV_9285(ah)) {
+		ah->nf_2g.max = AR_PHY_CCA_MAX_GOOD_VAL_9285_2GHZ;
+		ah->nf_2g.min = AR_PHY_CCA_MIN_GOOD_VAL_9285_2GHZ;
+		ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9285_2GHZ;
+	} else if (AR_SREV_9287(ah)) {
+		ah->nf_2g.max = AR_PHY_CCA_MAX_GOOD_VAL_9287_2GHZ;
+		ah->nf_2g.min = AR_PHY_CCA_MIN_GOOD_VAL_9287_2GHZ;
+		ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9287_2GHZ;
+	} else if (AR_SREV_9271(ah)) {
+		ah->nf_2g.max = AR_PHY_CCA_MAX_GOOD_VAL_9271_2GHZ;
+		ah->nf_2g.min = AR_PHY_CCA_MIN_GOOD_VAL_9271_2GHZ;
+		ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9271_2GHZ;
+	} else {
+		ah->nf_2g.max = AR_PHY_CCA_MAX_GOOD_VAL_9280_2GHZ;
+		ah->nf_2g.min = AR_PHY_CCA_MIN_GOOD_VAL_9280_2GHZ;
+		ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9280_2GHZ;
+		ah->nf_5g.max = AR_PHY_CCA_MAX_GOOD_VAL_9280_5GHZ;
+		ah->nf_5g.min = AR_PHY_CCA_MIN_GOOD_VAL_9280_5GHZ;
+		ah->nf_5g.nominal = AR_PHY_CCA_NOM_VAL_9280_5GHZ;
+	}
+}
+
+static void ar9002_hw_antdiv_comb_conf_get(struct ath_hw *ah,
+				   struct ath_hw_antcomb_conf *antconf)
+{
+	u32 regval;
+
+	regval = REG_READ(ah, AR_PHY_MULTICHAIN_GAIN_CTL);
+	antconf->main_lna_conf = (regval & AR_PHY_9285_ANT_DIV_MAIN_LNACONF) >>
+				  AR_PHY_9285_ANT_DIV_MAIN_LNACONF_S;
+	antconf->alt_lna_conf = (regval & AR_PHY_9285_ANT_DIV_ALT_LNACONF) >>
+				 AR_PHY_9285_ANT_DIV_ALT_LNACONF_S;
+	antconf->fast_div_bias = (regval & AR_PHY_9285_FAST_DIV_BIAS) >>
+				  AR_PHY_9285_FAST_DIV_BIAS_S;
+	antconf->lna1_lna2_switch_delta = -1;
+	antconf->lna1_lna2_delta = -3;
+	antconf->div_group = 0;
+}
+
+static void ar9002_hw_antdiv_comb_conf_set(struct ath_hw *ah,
+				   struct ath_hw_antcomb_conf *antconf)
+{
+	u32 regval;
+
+	regval = REG_READ(ah, AR_PHY_MULTICHAIN_GAIN_CTL);
+	regval &= ~(AR_PHY_9285_ANT_DIV_MAIN_LNACONF |
+		    AR_PHY_9285_ANT_DIV_ALT_LNACONF |
+		    AR_PHY_9285_FAST_DIV_BIAS);
+	regval |= ((antconf->main_lna_conf << AR_PHY_9285_ANT_DIV_MAIN_LNACONF_S)
+		   & AR_PHY_9285_ANT_DIV_MAIN_LNACONF);
+	regval |= ((antconf->alt_lna_conf << AR_PHY_9285_ANT_DIV_ALT_LNACONF_S)
+		   & AR_PHY_9285_ANT_DIV_ALT_LNACONF);
+	regval |= ((antconf->fast_div_bias << AR_PHY_9285_FAST_DIV_BIAS_S)
+		   & AR_PHY_9285_FAST_DIV_BIAS);
+
+	REG_WRITE(ah, AR_PHY_MULTICHAIN_GAIN_CTL, regval);
+}
+
+#ifdef CONFIG_ATH9K_BTCOEX_SUPPORT
+
+static void ar9002_hw_set_bt_ant_diversity(struct ath_hw *ah, bool enable)
+{
+	struct ath_btcoex_hw *btcoex = &ah->btcoex_hw;
+	u8 antdiv_ctrl1, antdiv_ctrl2;
+	u32 regval;
+
+	if (enable) {
+		antdiv_ctrl1 = ATH_BT_COEX_ANTDIV_CONTROL1_ENABLE;
+		antdiv_ctrl2 = ATH_BT_COEX_ANTDIV_CONTROL2_ENABLE;
+
+		/*
+		 * Don't disable BT ant to allow BB to control SWCOM.
+		 */
+		btcoex->bt_coex_mode2 &= (~(AR_BT_DISABLE_BT_ANT));
+		REG_WRITE(ah, AR_BT_COEX_MODE2, btcoex->bt_coex_mode2);
+
+		REG_WRITE(ah, AR_PHY_SWITCH_COM, ATH_BT_COEX_ANT_DIV_SWITCH_COM);
+		REG_RMW(ah, AR_PHY_SWITCH_CHAIN_0, 0, 0xf0000000);
+	} else {
+		/*
+		 * Disable antenna diversity, use LNA1 only.
+		 */
+		antdiv_ctrl1 = ATH_BT_COEX_ANTDIV_CONTROL1_FIXED_A;
+		antdiv_ctrl2 = ATH_BT_COEX_ANTDIV_CONTROL2_FIXED_A;
+
+		/*
+		 * Disable BT Ant. to allow concurrent BT and WLAN receive.
+		 */
+		btcoex->bt_coex_mode2 |= AR_BT_DISABLE_BT_ANT;
+		REG_WRITE(ah, AR_BT_COEX_MODE2, btcoex->bt_coex_mode2);
+
+		/*
+		 * Program SWCOM table to make sure RF switch always parks
+		 * at BT side.
+		 */
+		REG_WRITE(ah, AR_PHY_SWITCH_COM, 0);
+		REG_RMW(ah, AR_PHY_SWITCH_CHAIN_0, 0, 0xf0000000);
+	}
+
+	regval = REG_READ(ah, AR_PHY_MULTICHAIN_GAIN_CTL);
+	regval &= (~(AR_PHY_9285_ANT_DIV_CTL_ALL));
+        /*
+	 * Clear ant_fast_div_bias [14:9] since for WB195,
+	 * the main LNA is always LNA1.
+	 */
+	regval &= (~(AR_PHY_9285_FAST_DIV_BIAS));
+	regval |= SM(antdiv_ctrl1, AR_PHY_9285_ANT_DIV_CTL);
+	regval |= SM(antdiv_ctrl2, AR_PHY_9285_ANT_DIV_ALT_LNACONF);
+	regval |= SM((antdiv_ctrl2 >> 2), AR_PHY_9285_ANT_DIV_MAIN_LNACONF);
+	regval |= SM((antdiv_ctrl1 >> 1), AR_PHY_9285_ANT_DIV_ALT_GAINTB);
+	regval |= SM((antdiv_ctrl1 >> 2), AR_PHY_9285_ANT_DIV_MAIN_GAINTB);
+	REG_WRITE(ah, AR_PHY_MULTICHAIN_GAIN_CTL, regval);
+
+	regval = REG_READ(ah, AR_PHY_CCK_DETECT);
+	regval &= (~AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV);
+	regval |= SM((antdiv_ctrl1 >> 3), AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV);
+	REG_WRITE(ah, AR_PHY_CCK_DETECT, regval);
+}
+
+#endif
+
+static void ar9002_hw_spectral_scan_config(struct ath_hw *ah,
+				    struct ath_spec_scan *param)
+{
+	u32 repeat_bit;
+	u8 count;
+
+	if (!param->enabled) {
+		REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN,
+			    AR_PHY_SPECTRAL_SCAN_ENABLE);
+		return;
+	}
+	REG_SET_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_FFT_ENA);
+	REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE);
+
+	if (AR_SREV_9280(ah))
+		repeat_bit = AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT;
+	else
+		repeat_bit = AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT_KIWI;
+
+	if (param->short_repeat)
+		REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, repeat_bit);
+	else
+		REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN, repeat_bit);
+
+	/* on AR92xx, the highest bit of count will make the chip send
+	 * spectral samples endlessly. Check if this really was intended,
+	 * and fix otherwise.
+	 */
+	count = param->count;
+	if (param->endless) {
+		if (AR_SREV_9280(ah))
+			count = 0x80;
+		else
+			count = 0;
+	} else if (count & 0x80)
+		count = 0x7f;
+	else if (!count)
+		count = 1;
+
+	if (AR_SREV_9280(ah)) {
+		REG_RMW_FIELD(ah, AR_PHY_SPECTRAL_SCAN,
+			      AR_PHY_SPECTRAL_SCAN_COUNT, count);
+	} else {
+		REG_RMW_FIELD(ah, AR_PHY_SPECTRAL_SCAN,
+			      AR_PHY_SPECTRAL_SCAN_COUNT_KIWI, count);
+		REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN,
+			    AR_PHY_SPECTRAL_SCAN_PHYERR_MASK_SELECT);
+	}
+
+	REG_RMW_FIELD(ah, AR_PHY_SPECTRAL_SCAN,
+		      AR_PHY_SPECTRAL_SCAN_PERIOD, param->period);
+	REG_RMW_FIELD(ah, AR_PHY_SPECTRAL_SCAN,
+		      AR_PHY_SPECTRAL_SCAN_FFT_PERIOD, param->fft_period);
+
+	return;
+}
+
+static void ar9002_hw_spectral_scan_trigger(struct ath_hw *ah)
+{
+	REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE);
+	/* Activate spectral scan */
+	REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN,
+		    AR_PHY_SPECTRAL_SCAN_ACTIVE);
+}
+
+static void ar9002_hw_spectral_scan_wait(struct ath_hw *ah)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+
+	/* Poll for spectral scan complete */
+	if (!ath9k_hw_wait(ah, AR_PHY_SPECTRAL_SCAN,
+			   AR_PHY_SPECTRAL_SCAN_ACTIVE,
+			   0, AH_WAIT_TIMEOUT)) {
+		ath_err(common, "spectral scan wait failed\n");
+		return;
+	}
+}
+
+static void ar9002_hw_tx99_start(struct ath_hw *ah, u32 qnum)
+{
+	REG_SET_BIT(ah, 0x9864, 0x7f000);
+	REG_SET_BIT(ah, 0x9924, 0x7f00fe);
+	REG_CLR_BIT(ah, AR_DIAG_SW, AR_DIAG_RX_DIS);
+	REG_WRITE(ah, AR_CR, AR_CR_RXD);
+	REG_WRITE(ah, AR_DLCL_IFS(qnum), 0);
+	REG_WRITE(ah, AR_D_GBL_IFS_SIFS, 20);
+	REG_WRITE(ah, AR_D_GBL_IFS_EIFS, 20);
+	REG_WRITE(ah, AR_D_FPCTL, 0x10|qnum);
+	REG_WRITE(ah, AR_TIME_OUT, 0x00000400);
+	REG_WRITE(ah, AR_DRETRY_LIMIT(qnum), 0xffffffff);
+	REG_SET_BIT(ah, AR_QMISC(qnum), AR_Q_MISC_DCU_EARLY_TERM_REQ);
+}
+
+static void ar9002_hw_tx99_stop(struct ath_hw *ah)
+{
+	REG_SET_BIT(ah, AR_DIAG_SW, AR_DIAG_RX_DIS);
+}
+
+void ar9002_hw_attach_phy_ops(struct ath_hw *ah)
+{
+	struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
+	struct ath_hw_ops *ops = ath9k_hw_ops(ah);
+
+	priv_ops->set_rf_regs = NULL;
+	priv_ops->rf_set_freq = ar9002_hw_set_channel;
+	priv_ops->spur_mitigate_freq = ar9002_hw_spur_mitigate;
+	priv_ops->olc_init = ar9002_olc_init;
+	priv_ops->compute_pll_control = ar9002_hw_compute_pll_control;
+	priv_ops->do_getnf = ar9002_hw_do_getnf;
+
+	ops->antdiv_comb_conf_get = ar9002_hw_antdiv_comb_conf_get;
+	ops->antdiv_comb_conf_set = ar9002_hw_antdiv_comb_conf_set;
+	ops->spectral_scan_config = ar9002_hw_spectral_scan_config;
+	ops->spectral_scan_trigger = ar9002_hw_spectral_scan_trigger;
+	ops->spectral_scan_wait = ar9002_hw_spectral_scan_wait;
+
+#ifdef CONFIG_ATH9K_BTCOEX_SUPPORT
+	ops->set_bt_ant_diversity = ar9002_hw_set_bt_ant_diversity;
+#endif
+	ops->tx99_start = ar9002_hw_tx99_start;
+	ops->tx99_stop = ar9002_hw_tx99_stop;
+
+	ar9002_hw_set_nf_limits(ah);
+}