Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 218 insertions, 0 deletions

diff --git a/drivers/net/wireless/ti/wl18xx/conf.h b/drivers/net/wireless/ti/wl18xx/conf.h
new file mode 100644
index 000000000..9621bc247
--- /dev/null
+++ b/drivers/net/wireless/ti/wl18xx/conf.h
@@ -0,0 +1,218 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * This file is part of wl18xx
+ *
+ * Copyright (C) 2011 Texas Instruments Inc.
+ */
+
+#ifndef __WL18XX_CONF_H__
+#define __WL18XX_CONF_H__
+
+#define WL18XX_CONF_MAGIC	0x10e100ca
+#define WL18XX_CONF_VERSION	(WLCORE_CONF_VERSION | 0x0007)
+#define WL18XX_CONF_MASK	0x0000ffff
+#define WL18XX_CONF_SIZE	(WLCORE_CONF_SIZE + \
+				 sizeof(struct wl18xx_priv_conf))
+
+#define NUM_OF_CHANNELS_11_ABG 150
+#define NUM_OF_CHANNELS_11_P 7
+#define SRF_TABLE_LEN 16
+#define PIN_MUXING_SIZE 2
+#define WL18XX_TRACE_LOSS_GAPS_TX 10
+#define WL18XX_TRACE_LOSS_GAPS_RX 18
+
+struct wl18xx_mac_and_phy_params {
+	u8 phy_standalone;
+	u8 spare0;
+	u8 enable_clpc;
+	u8 enable_tx_low_pwr_on_siso_rdl;
+	u8 auto_detect;
+	u8 dedicated_fem;
+
+	u8 low_band_component;
+
+	/* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */
+	u8 low_band_component_type;
+
+	u8 high_band_component;
+
+	/* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */
+	u8 high_band_component_type;
+	u8 number_of_assembled_ant2_4;
+	u8 number_of_assembled_ant5;
+	u8 pin_muxing_platform_options[PIN_MUXING_SIZE];
+	u8 external_pa_dc2dc;
+	u8 tcxo_ldo_voltage;
+	u8 xtal_itrim_val;
+	u8 srf_state;
+	u8 srf1[SRF_TABLE_LEN];
+	u8 srf2[SRF_TABLE_LEN];
+	u8 srf3[SRF_TABLE_LEN];
+	u8 io_configuration;
+	u8 sdio_configuration;
+	u8 settings;
+	u8 rx_profile;
+	u8 per_chan_pwr_limit_arr_11abg[NUM_OF_CHANNELS_11_ABG];
+	u8 pwr_limit_reference_11_abg;
+	u8 per_chan_pwr_limit_arr_11p[NUM_OF_CHANNELS_11_P];
+	u8 pwr_limit_reference_11p;
+	u8 spare1;
+	u8 per_chan_bo_mode_11_abg[13];
+	u8 per_chan_bo_mode_11_p[4];
+	u8 primary_clock_setting_time;
+	u8 clock_valid_on_wake_up;
+	u8 secondary_clock_setting_time;
+	u8 board_type;
+	/* enable point saturation */
+	u8 psat;
+	/* low/medium/high Tx power in dBm for STA-HP BG */
+	s8 low_power_val;
+	s8 med_power_val;
+	s8 high_power_val;
+	s8 per_sub_band_tx_trace_loss[WL18XX_TRACE_LOSS_GAPS_TX];
+	s8 per_sub_band_rx_trace_loss[WL18XX_TRACE_LOSS_GAPS_RX];
+	u8 tx_rf_margin;
+	/* low/medium/high Tx power in dBm for other role */
+	s8 low_power_val_2nd;
+	s8 med_power_val_2nd;
+	s8 high_power_val_2nd;
+
+	u8 padding[1];
+} __packed;
+
+enum wl18xx_ht_mode {
+	/* Default - use MIMO, fallback to SISO20 */
+	HT_MODE_DEFAULT = 0,
+
+	/* Wide - use SISO40 */
+	HT_MODE_WIDE = 1,
+
+	/* Use SISO20 */
+	HT_MODE_SISO20 = 2,
+};
+
+struct wl18xx_ht_settings {
+	/* DEFAULT / WIDE / SISO20 */
+	u8 mode;
+} __packed;
+
+struct conf_ap_sleep_settings {
+	/* Duty Cycle (20-80% of staying Awake) for IDLE AP
+	 * (0: disable)
+	 */
+	u8 idle_duty_cycle;
+	/* Duty Cycle (20-80% of staying Awake) for Connected AP
+	 * (0: disable)
+	 */
+	u8 connected_duty_cycle;
+	/* Maximum stations that are allowed to be connected to AP
+	 *  (255: no limit)
+	 */
+	u8 max_stations_thresh;
+	/* Timeout till enabling the Sleep Mechanism after data stops
+	 * [unit: 100 msec]
+	 */
+	u8 idle_conn_thresh;
+} __packed;
+
+struct wl18xx_priv_conf {
+	/* Module params structures */
+	struct wl18xx_ht_settings ht;
+
+	/* this structure is copied wholesale to FW */
+	struct wl18xx_mac_and_phy_params phy;
+
+	struct conf_ap_sleep_settings ap_sleep;
+} __packed;
+
+enum wl18xx_sg_params {
+	WL18XX_CONF_SG_PARAM_0 = 0,
+
+	/* Configuration Parameters */
+	WL18XX_CONF_SG_ANTENNA_CONFIGURATION,
+	WL18XX_CONF_SG_ZIGBEE_COEX,
+	WL18XX_CONF_SG_TIME_SYNC,
+
+	WL18XX_CONF_SG_PARAM_4,
+	WL18XX_CONF_SG_PARAM_5,
+	WL18XX_CONF_SG_PARAM_6,
+	WL18XX_CONF_SG_PARAM_7,
+	WL18XX_CONF_SG_PARAM_8,
+	WL18XX_CONF_SG_PARAM_9,
+	WL18XX_CONF_SG_PARAM_10,
+	WL18XX_CONF_SG_PARAM_11,
+	WL18XX_CONF_SG_PARAM_12,
+	WL18XX_CONF_SG_PARAM_13,
+	WL18XX_CONF_SG_PARAM_14,
+	WL18XX_CONF_SG_PARAM_15,
+	WL18XX_CONF_SG_PARAM_16,
+	WL18XX_CONF_SG_PARAM_17,
+	WL18XX_CONF_SG_PARAM_18,
+	WL18XX_CONF_SG_PARAM_19,
+	WL18XX_CONF_SG_PARAM_20,
+	WL18XX_CONF_SG_PARAM_21,
+	WL18XX_CONF_SG_PARAM_22,
+	WL18XX_CONF_SG_PARAM_23,
+	WL18XX_CONF_SG_PARAM_24,
+	WL18XX_CONF_SG_PARAM_25,
+
+	/* Active Scan Parameters */
+	WL18XX_CONF_SG_AUTO_SCAN_PROBE_REQ,
+	WL18XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,
+
+	WL18XX_CONF_SG_PARAM_28,
+
+	/* Passive Scan Parameters */
+	WL18XX_CONF_SG_PARAM_29,
+	WL18XX_CONF_SG_PARAM_30,
+	WL18XX_CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,
+
+	/* Passive Scan in Dual Antenna Parameters */
+	WL18XX_CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN,
+	WL18XX_CONF_SG_BEACON_HV3_COLL_TH_IN_PASSIVE_SCAN,
+	WL18XX_CONF_SG_TX_RX_PROTECT_BW_IN_PASSIVE_SCAN,
+
+	/* General Parameters */
+	WL18XX_CONF_SG_STA_FORCE_PS_IN_BT_SCO,
+	WL18XX_CONF_SG_PARAM_36,
+	WL18XX_CONF_SG_BEACON_MISS_PERCENT,
+	WL18XX_CONF_SG_PARAM_38,
+	WL18XX_CONF_SG_RXT,
+	WL18XX_CONF_SG_UNUSED,
+	WL18XX_CONF_SG_ADAPTIVE_RXT_TXT,
+	WL18XX_CONF_SG_GENERAL_USAGE_BIT_MAP,
+	WL18XX_CONF_SG_HV3_MAX_SERVED,
+	WL18XX_CONF_SG_PARAM_44,
+	WL18XX_CONF_SG_PARAM_45,
+	WL18XX_CONF_SG_CONSECUTIVE_CTS_THRESHOLD,
+	WL18XX_CONF_SG_GEMINI_PARAM_47,
+	WL18XX_CONF_SG_STA_CONNECTION_PROTECTION_TIME,
+
+	/* AP Parameters */
+	WL18XX_CONF_SG_AP_BEACON_MISS_TX,
+	WL18XX_CONF_SG_PARAM_50,
+	WL18XX_CONF_SG_AP_BEACON_WINDOW_INTERVAL,
+	WL18XX_CONF_SG_AP_CONNECTION_PROTECTION_TIME,
+	WL18XX_CONF_SG_PARAM_53,
+	WL18XX_CONF_SG_PARAM_54,
+
+	/* CTS Diluting Parameters */
+	WL18XX_CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH,
+	WL18XX_CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER,
+
+	WL18XX_CONF_SG_TEMP_PARAM_1,
+	WL18XX_CONF_SG_TEMP_PARAM_2,
+	WL18XX_CONF_SG_TEMP_PARAM_3,
+	WL18XX_CONF_SG_TEMP_PARAM_4,
+	WL18XX_CONF_SG_TEMP_PARAM_5,
+	WL18XX_CONF_SG_TEMP_PARAM_6,
+	WL18XX_CONF_SG_TEMP_PARAM_7,
+	WL18XX_CONF_SG_TEMP_PARAM_8,
+	WL18XX_CONF_SG_TEMP_PARAM_9,
+	WL18XX_CONF_SG_TEMP_PARAM_10,
+
+	WL18XX_CONF_SG_PARAMS_MAX,
+	WL18XX_CONF_SG_PARAMS_ALL = 0xff
+};
+
+#endif /* __WL18XX_CONF_H__ */